The TAS6426 has a register that reports channel faults such as
overcurrent and continuous DC output. Add reporting of this here.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

When there is no fault bit set in a fault register we skip the fault
reporting section for that register. This also skips over saving that
registers value. We save the value so we will not double report an
error, but if an error clears then returns we will also not report it
as we did not save the all cleared register value. Fix this by saving
the fault register value in the all clear path.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org

The current short version of the register name may be
ambiguous when another fault register detection is added.
Use the full name.

While here fix comment about clearing faults, the CLEAR_FAULT
register actually only clears sticky bits, which are only
warnings, fault bits can only cleared by resolving the fault.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Now no simple/audio cards are using legacy dai_link style for platform.
Let's remove compatible code.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Current ASoC is supporting snd_soc_dai_link_component for binding,
it is more useful than current legacy style.
Currently only codec is supporting it as multicodec (= codecs).
CPU will support multi style in the future.
We want to have it on Platform too in the future.

If all Codec/CPU/Platform are replaced into snd_soc_dai_link_component
style, we can remove legacy complex style.
This patch supports snd_soc_dai_link_component style
for audio-graph-scu-card for platform.

[current]
struct snd_soc_dai_link {
	...
	*cpu_name;
	*cpu_of_node;
	*cpu_dai_name;

	*codec_name;
	*codec_of_node;
	*codec_dai_name;
	*codecs;
	num_codecs;

	*platform_name;
	*platform_of_node;
	...
}

[in the future]
struct snd_soc_dai_link {
	...
	*cpus
	num_cpus;

	*codecs;
	num_codecs;

	*platform;
	...
}
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Current ASoC is supporting snd_soc_dai_link_component for binding,
it is more useful than current legacy style.
Currently only codec is supporting it as multicodec (= codecs).
CPU will support multi style in the future.
We want to have it on Platform too in the future.

If all Codec/CPU/Platform are replaced into snd_soc_dai_link_component
style, we can remove legacy complex style.
This patch supports snd_soc_dai_link_component style
for audio-graph-card for platform.

[current]
struct snd_soc_dai_link {
	...
	*cpu_name;
	*cpu_of_node;
	*cpu_dai_name;

	*codec_name;
	*codec_of_node;
	*codec_dai_name;
	*codecs;
	num_codecs;

	*platform_name;
	*platform_of_node;
	...
}

[in the future]
struct snd_soc_dai_link {
	...
	*cpus
	num_cpus;

	*codecs;
	num_codecs;

	*platform;
	...
}
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Current ASoC is supporting snd_soc_dai_link_component for binding,
it is more useful than current legacy style.
Currently only codec is supporting it as multicodec (= codecs).
CPU will support multi style in the future.
We want to have it on Platform too in the future.

If all Codec/CPU/Platform are replaced into snd_soc_dai_link_component
style, we can remove legacy complex style.
This patch supports snd_soc_dai_link_component style
for simple-scu-card for platform.

[current]
struct snd_soc_dai_link {
	...
	*cpu_name;
	*cpu_of_node;
	*cpu_dai_name;

	*codec_name;
	*codec_of_node;
	*codec_dai_name;
	*codecs;
	num_codecs;

	*platform_name;
	*platform_of_node;
	...
}

[in the future]
struct snd_soc_dai_link {
	...
	*cpus
	num_cpus;

	*codecs;
	num_codecs;

	*platform;
	...
}
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Current ASoC is supporting snd_soc_dai_link_component for binding,
it is more useful than current legacy style.
Currently only codec is supporting it as multicodec (= codecs).
CPU will support multi style in the future.
We want to have it on Platform too in the future.

If all Codec/CPU/Platform are replaced into snd_soc_dai_link_component
style, we can remove legacy complex style.
This patch supports snd_soc_dai_link_component style
for simple-card for platform.

[current]
struct snd_soc_dai_link {
	...
	*cpu_name;
	*cpu_of_node;
	*cpu_dai_name;

	*codec_name;
	*codec_of_node;
	*codec_dai_name;
	*codecs;
	num_codecs;

	*platform_name;
	*platform_of_node;
	...
}

[in the future]
struct snd_soc_dai_link {
	...
	*cpus
	num_cpus;

	*codecs;
	num_codecs;

	*platform;
	...
}
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Current ASoC is supporting snd_soc_dai_link_component for binding,
it is more useful than current legacy style.
Currently only codec is supporting it as multicodec (= codecs).
CPU will support multi style in the future.
We want to have it on Platform too in the future.

If all Codec/CPU/Platform are replaced into snd_soc_dai_link_component
style, we can remove legacy complex style.
This patch supports snd_soc_dai_link_component style
for simple-card-util for platform.

[current]
struct snd_soc_dai_link {
	...
	*cpu_name;
	*cpu_of_node;
	*cpu_dai_name;

	*codec_name;
	*codec_of_node;
	*codec_dai_name;
	*codecs;
	num_codecs;

	*platform_name;
	*platform_of_node;
	...
}

[in the future]
struct snd_soc_dai_link {
	...
	*cpus
	num_cpus;

	*codecs;
	num_codecs;

	*platform;
	...
}
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Current struct snd_soc_dai_link is supporting multicodec,
and it is supporting legacy style of
	codec_name
	codec_of_node
	code_dai_name
This is handled as single entry of multicodec.

We don't have multicpu support yet, but in the future we will.
In such case, we can use snd_soc_dai_link_component for both
cpu/codec. Then the code will be more simple and readble.

As next step, we want to use it for platform, too.
This patch adds snd_soc_dai_link_component style for platform.
We might have multiplatform support in the future, but we
don't know yet. To avoid un-known issue / complex code,
this patch supports just single-platform as 1st step.

If we could use snd_soc_dai_link_component for all CPU/Codec/Platform,
we will switch to new style, and remove legacy code.
This is prepare for it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Now no simple/audio cards are using legacy dai_link style for codec.
Let's remove compatible code.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Current ASoC is supporting snd_soc_dai_link_component for binding,
it is more useful than current legacy style.
Currently only codec is supporting it as multicodec (= codecs).
CPU will support multi style in the future.
We want to have it on Platform too in the future.

If all Codec/CPU/Platform are replaced into snd_soc_dai_link_component
style, we can remove legacy complex style.
This patch supports snd_soc_dai_link_component style
for audio-graph-scu-card for codec.

[current]
struct snd_soc_dai_link {
	...
	*cpu_name;
	*cpu_of_node;
	*cpu_dai_name;

	*codec_name;
	*codec_of_node;
	*codec_dai_name;
	*codecs;
	num_codecs;

	*platform_name;
	*platform_of_node;
	...
}

[in the future]
struct snd_soc_dai_link {
	...
	*cpus
	num_cpus;

	*codecs;
	num_codecs;

	*platform;
	...
}
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

audi-graph-card and audio-graph-scu-card are very similar driver,
but using different feature. Thus we are keeping synchronization
on these 2 drivers style, because it is easy to confirm / check.

Current big difference between these 2 drivers are "dai_props" on
graph_card_data (= priv).
It will be difficult to keep synchronize if we will add new feature
on audio-graph-scu-card. Thus, this patch synchronize it.

[audio-graph]
struct graph_card_data {
	...
	struct graph_dai_props {
		...
	} *dai_props;
	...
};

[audio-graph-scu]
struct graph_card_data {
	...
	struct asoc_simple_dai *dai_props;
	...
};
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Current ASoC is supporting snd_soc_dai_link_component for binding,
it is more useful than current legacy style.
Currently only codec is supporting it as multicodec (= codecs).
CPU will support multi style in the future.
We want to have it on Platform too in the future.

If all Codec/CPU/Platform are replaced into snd_soc_dai_link_component
style, we can remove legacy complex style.
This patch supports snd_soc_dai_link_component style
for audio-graph-card for codec.

[current]
struct snd_soc_dai_link {
	...
	*cpu_name;
	*cpu_of_node;
	*cpu_dai_name;

	*codec_name;
	*codec_of_node;
	*codec_dai_name;
	*codecs;
	num_codecs;

	*platform_name;
	*platform_of_node;
	...
}

[in the future]
struct snd_soc_dai_link {
	...
	*cpus
	num_cpus;

	*codecs;
	num_codecs;

	*platform;
	...
}
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Current ASoC is supporting snd_soc_dai_link_component for binding,
it is more useful than current legacy style.
Currently only codec is supporting it as multicodec (= codecs).
CPU will support multi style in the future.
We want to have it on Platform too in the future.

If all Codec/CPU/Platform are replaced into snd_soc_dai_link_component
style, we can remove legacy complex style.
This patch supports snd_soc_dai_link_component style
for simple-scu-card for codec.

[current]
struct snd_soc_dai_link {
	...
	*cpu_name;
	*cpu_of_node;
	*cpu_dai_name;

	*codec_name;
	*codec_of_node;
	*codec_dai_name;
	*codecs;
	num_codecs;

	*platform_name;
	*platform_of_node;
	...
}

[in the future]
struct snd_soc_dai_link {
	...
	*cpus
	num_cpus;

	*codecs;
	num_codecs;

	*platform;
	...
}
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

simple-card and simple-scu-card are very similar driver,
but using different feature. Thus we are keeping synchronization
on these 2 drivers style, because it is easy to confirm / check.

Current big difference between these 2 drivers are "dai_props" on
simple_card_data (= priv).
It will be difficult to keep synchronize if we will add new feature
on simple-scu-card. Thus, this patch synchronize it.

[simple]
struct simple_card_data {
	...
	struct simple_dai_props {
		...
	} *dai_props;
	...
};

[simple scu]
struct simple_card_data {
	...
	struct asoc_simple_dai *dai_props;
	...
};
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Current ASoC is supporting snd_soc_dai_link_component for binding,
it is more useful than current legacy style.
Currently only codec is supporting it as multicodec (= codecs).
CPU will support multi style in the future.
We want to have it on Platform too in the future.

If all Codec/CPU/Platform are replaced into snd_soc_dai_link_component
style, we can remove legacy complex style.
This patch supports snd_soc_dai_link_component style
for simple-card for codec.

[current]
struct snd_soc_dai_link {
	...
	*cpu_name;
	*cpu_of_node;
	*cpu_dai_name;

	*codec_name;
	*codec_of_node;
	*codec_dai_name;
	*codecs;
	num_codecs;

	*platform_name;
	*platform_of_node;
	...
}

[in the future]
struct snd_soc_dai_link {
	...
	*cpus
	num_cpus;

	*codecs;
	num_codecs;

	*platform;
	...
}
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Current ASoC is supporting snd_soc_dai_link_component for binding,
it is more useful than current legacy style.
Currently only codec is supporting it as multicodec (= codecs).
CPU will support multi style in the future.
We want to have it on Platform too in the future.

If all Codec/CPU/Platform are replaced into snd_soc_dai_link_component
style, we can remove legacy complex style.
This patch supports snd_soc_dai_link_component style
for simple_card_utils for codec.

[current]
struct snd_soc_dai_link {
	...
	*cpu_name;
	*cpu_of_node;
	*cpu_dai_name;

	*codec_name;
	*codec_of_node;
	*codec_dai_name;
	*codecs;
	num_codecs;

	*platform_name;
	*platform_of_node;
	...
}

[in the future]
struct snd_soc_dai_link {
	...
	*cpus
	num_cpus;

	*codecs;
	num_codecs;

	*platform;
	...
}
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

This patch adds a S/PDIF enable switch as a SOC_SINGLE.
Signed-off-by: Matt Flax <flatmax@flatmax.org>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

The cs4265 uses 32 bit transport on the I2S bus. This patch enables native
32 bit mode for machine drivers which use this sound card driver.
Signed-off-by: Matt Flax <flatmax@flatmax.org>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

The cs4265 driver declares the "MMTLR Data Switch" register setting with
a 0 register value rather then the 0x12 register (CS4265_SPDIF_CTL2).
This incorrect value causes alsamixer to fault with the output :
cannot load mixer controls: Input/output error

This patch corrects the register value. alsamixer now runs.
Signed-off-by: Matt Flax <flatmax@flatmax.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

Unlike the TAS5720, the TAS5722 can be configured to utilize 16-bit wide
slots in TDM mode. This can help easing audio clocking/frequency
requirements.
Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

The TAS5722 supports modifying volume in 0.25dB steps (as opposed to
0.5dB steps on the TAS5720). Introduce a custom mixer control that
allows taking advantage of this finer output volume granularity.

Also add custom getters/setters for access as the TAS5722 digital volume
controls are split over two registers.
Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

McASP have write and read FIFO, each 64 words deep.

From the WFIFOS/RFIFOS registers we can read the amount of data currently
in the FIFO which can be directly reported as delay.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ALSA: Move hda_codec.h to include/sound

For easier sharing with ASoC.

As suggested by Takashi, move this header file to make it easier
to include from e.g. the Intel Skylake driver in follow-up patches
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Add pdm input driver for the device found on the amlogic AXG SoC family
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Add the DT binding documentation for axg's PDM input
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Before this patch the only alias provided by the dmic module is:
alias:          platform:dmic-codec

Device instantiated from DT will not probe automatically with this

After this patch, here is the new alias list:
alias:          platform:dmic-codec
alias:          of:N*T*Cdmic-codecC*
alias:          of:N*T*Cdmic-codec

Now the dmic codec probes automatically when instantiated from DT.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Add Kconfig prompt for the generic digital mic to make it configurable
through menuconfig
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

adau17x1_setup_firmware and adau17x1_has_dsp is only used internally, so
making them static instead of exported.
Signed-off-by: Robert Rosengren <robertr@axis.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>

Modified some if-statements to make them more clear
Signed-off-by: Kirill Marinushkin <kmarinushkin@birdec.tech>
Signed-off-by: Mark Brown <broonie@kernel.org>

Modified the complete file comments in C++ style, to make them look more
intentional
Signed-off-by: Kirill Marinushkin <kmarinushkin@birdec.tech>
Signed-off-by: Mark Brown <broonie@kernel.org>

Convert to // comments in the leading comment, drop the boilerplate
license text and use the correct MODULE_LICENSE.
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Mark Brown <broonie@kernel.org>

25Mhz MCLK which was earlier used was of spread type.
Thus, we were not getting accurate rate. The 48Mhz system
clk is of non-spread type and we are changing to it to get
accurate rate.
Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

We support dual channel, 48Khz. This constraint was set only for
da7219. It is being extended to DMIC and MAX98357a.
Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

This commit adds support for TI PCM3060 CODEC.
The technical documentation is available at [1].

[1] http://ti.com/product/pcm3060Signed-off-by: Kirill Marinushkin <kmarinushkin@birdec.tech>
Cc: Mark Brown <broonie@kernel.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: M R Swami Reddy <mr.swami.reddy@ti.com>
Cc: Vishwas A Deshpande <vishwas.a.deshpande@ti.com>
Cc: Kevin Cernekee <cernekee@chromium.org>
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Cc: alsa-devel@alsa-project.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>

Document RZ/G2M (R8A774A1) SoC bindings.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Biju Das <biju.das@bp.renesas.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Mark Brown <broonie@kernel.org>

Having the headset buttons send BTN_0, BTN_1 and BTN_2 events is not
really useful. Add mappings to PLAYPAUSE VOLUME_UP and VOLUME_DOWN like
we do in other Intel machine drivers.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mark Brown <broonie@kernel.org>