Since snprintf() returns the would-be-output size instead of the
actual output size, the succeeding calls may go beyond the given
buffer limit.  Fix it by replacing with scnprintf().
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Since snprintf() returns the would-be-output size instead of the
actual output size, the succeeding calls may go beyond the given
buffer limit.  Fix it by replacing with scnprintf().
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

It's possible that there is scheduled work left while the device is
already being removed, which can cause a kernel crash. Adding a flag
will avoid this.
Signed-off-by: Hanno Zulla <kontakt@hanno.de>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>

It's required to call hid_hw_stop() once hid_hw_start() was called
previously, so error cases need to handle this. Also, hid_hw_close() is
not necessary during removal.
Signed-off-by: Hanno Zulla <kontakt@hanno.de>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>

The struct *bigben was allocated via devm_kzalloc() and then used as a
parameter in input_ff_create_memless(). This caused a double kfree
during removal of the device, since both the managed resource API and
ml_ff_destroy() in drivers/input/ff-memless.c would call kfree() on it.
Signed-off-by: Hanno Zulla <kontakt@hanno.de>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>

The Surfbook E11B uses the SIPODEV SP1064 touchpad, which does not supply
descriptors, so it has to be added to the override list.

BugLink: https://bugs.launchpad.net/bugs/1858299Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>

They are issues:
   - if 'input_allocate_device()' fails and return NULL, there is no need
     to free anything and 'input_free_device()' call is a no-op. It can
     be axed.
   - 'ret' is known to be 0 at this point, so we must set it to a
     meaningful value before returning

Fixes: 2562756d ("HID: add Alps I2C HID Touchpad-Stick support")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Syzbot reports that "hiddev" is used after it's free in hiddev_disconnect().
The hiddev_disconnect() function sets "hiddev->exist = 0;" so
hiddev_release() can free it as soon as we drop the "existancelock"
lock.  This patch moves the mutex_unlock(&hiddev->existancelock) until
after we have finished using it.

Reported-by: syzbot+784ccb935f9900cc7c9e@syzkaller.appspotmail.com
Fixes: 7f77897e ("HID: hiddev: fix potential use-after-free")
Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

We have a HID touch device that reports its opens and shorts test
results in HID buffers of size 8184 bytes. The maximum size of the HID
buffer is currently set to 4096 bytes, causing probe of this device to
fail. With this patch we increase the maximum size of the HID buffer to
8192 bytes, making device probe and acquisition of said buffers succeed.
Signed-off-by: Johan Korsnes <jkorsnes@cisco.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Armando Visconti <armando.visconti@st.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

In case a report is greater than HID_MAX_BUFFER_SIZE, it is truncated,
but the report-number byte is not correctly handled. This results in a
off-by-one in the following memset, causing a kernel Oops and ensuing
system crash.

Note: With commit 8ec321e9 ("HID: Fix slab-out-of-bounds read in
hid_field_extract") I no longer hit the kernel Oops as we instead fail
"controlled" at probe if there is a report too long in the HID
report-descriptor. hid_report_raw_event() is an exported symbol, so
presumabely we cannot always rely on this being the case.

Fixes: 966922f2 ("HID: fix a crash in hid_report_raw_event()
                     function.")
Signed-off-by: Johan Korsnes <jkorsnes@cisco.com>
Cc: Armando Visconti <armando.visconti@st.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Magic Keyboards with more recent firmware (0x0100) report Fn key differently.
Without this patch, Fn key may not behave as expected and may not be
configurable via hid_apple fnmode module parameter.
Signed-off-by: Mansour Behabadi <mansour@oxplot.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Commit 8f18eca9 ("HID: ite: Add USB id match for Acer SW5-012 keyboard
dock") added the USB id for the Acer SW5-012's keyboard dock to the
hid-ite driver to fix the rfkill driver not working.

Most keyboard docks with an ITE 8595 keyboard/touchpad controller have the
"Wireless Radio Control" bits which need the special hid-ite driver on the
second USB interface (the mouse interface) and their touchpad only supports
mouse emulation, so using generic hid-input handling for anything but
the "Wireless Radio Control" bits is fine. On these devices we simply bind
to all USB interfaces.

But unlike other ITE8595 using keyboard docks, the Acer Aspire Switch 10
(SW5-012)'s touchpad not only does mouse emulation it also supports
HID-multitouch and all the keys including the "Wireless Radio Control"
bits have been moved to the first USB interface (the keyboard intf).

So we need hid-ite to handle the first (keyboard) USB interface and have
it NOT bind to the second (mouse) USB interface so that that can be
handled by hid-multitouch.c and we get proper multi-touch support.

This commit changes the hid_device_id for the SW5-012 keyboard dock to
only match on hid devices from the HID_GROUP_GENERIC group, this way
hid-ite will not bind the the mouse/multi-touch interface which has
HID_GROUP_MULTITOUCH_WIN_8 as group.
This fixes the regression to mouse-emulation mode introduced by adding
the keyboard dock USB id.

Cc: stable@vger.kernel.org
Fixes: 8f18eca9 ("HID: ite: Add USB id match for Acer SW5-012 keyboard dock")
Reported-by: Zdeněk Rampas <zdenda.rampas@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>

In the HID++ 2.0 function getBatteryInfo() from the BatteryVoltage
(0x1001) feature, chargeStatus is only valid if extPower is active.

Previously we were ignoring extPower, which resulted in wrong values.

Example:
    With an unplugged mouse

    $ cat /sys/class/power_supply/hidpp_battery_0/status
    Charging

This patch fixes that, it also renames charge_sts to flags as
charge_sts can be confused with chargeStatus from the spec.

Spec:
+--------+-------------------------------------------------------------------------+
|  byte  |                                    2                                    |
+--------+--------------+------------+------------+----------+----------+----------+
|   bit  |     0..2     |      3     |      4     |     5    |     6    |     7    |
+--------+--------------+------------+------------+----------+----------+----------+
| buffer | chargeStatus | fastCharge | slowCharge | critical | (unused) | extPower |
+--------+--------------+------------+------------+----------+----------+----------+
Table 1 - battery voltage (0x1001), getBatteryInfo() (ASE 0), 3rd byte

+-------+--------------------------------------+
| value |                meaning               |
+-------+--------------------------------------+
|   0   | Charging                             |
+-------+--------------------------------------+
|   1   | End of charge (100% charged)         |
+-------+--------------------------------------+
|   2   | Charge stopped (any "normal" reason) |
+-------+--------------------------------------+
|   7   | Hardware error                       |
+-------+--------------------------------------+
Table 2 - chargeStatus value
Signed-off-by: Filipe Laíns <lains@archlinux.org>
Tested-by: Pedro Vanzella <pedro@pedrovanzella.com>
Reviewed-by: Pedro Vanzella <pedro@pedrovanzella.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>

Pull HID updates from Jiri Kosina:
 "This time it's surprisingly quiet (probably due to the christmas
  break):

   - Logitech HID++ protocol improvements from Mazin Rezk, Pedro
     Vanzella and Adrian Freund

   - support for hidraw uniq ioctl from Marcel Holtmann"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  HID: logitech-hidpp: avoid duplicate error handling code in 'hidpp_probe()'
  hid-logitech-hidpp: read battery voltage from newer devices
  HID: logitech: Add MX Master 3 Mouse
  HID: logitech-hidpp: Support WirelessDeviceStatus connect events
  HID: logitech-hidpp: Support translations from short to long reports
  HID: hidraw: add support uniq ioctl

Pull x86 platform driver updates from Andy Shevchenko:

 - Enable thermal policy for ASUS TUF FX705DY/FX505DY

 - Support left round button on ASUS N56VB

 - Support new Mellanox platforms of basic class VMOD0009 and VMOD0010

 - Intel Comet Lake, Tiger Lake and Elkhart Lake support in the PMC
   driver

 - Big clean-up to Intel PMC core, PMC IPC and SCU IPC drivers

 - Touchscreen support for the PiPO W11 tablet

* tag 'platform-drivers-x86-v5.6-1' of git://git.infradead.org/linux-platform-drivers-x86: (64 commits)
  platform/x86: intel_pmc_ipc: Switch to use driver->dev_groups
  platform/x86: intel_pmc_ipc: Propagate error from kstrtoul()
  platform/x86: intel_pmc_ipc: Use octal permissions in sysfs attributes
  platform/x86: intel_pmc_ipc: Get rid of unnecessary includes
  platform/x86: intel_pmc_ipc: Drop ipc_data_readb()
  platform/x86: intel_pmc_ipc: Drop intel_pmc_gcr_read() and intel_pmc_gcr_write()
  platform/x86: intel_pmc_ipc: Make intel_pmc_ipc_raw_cmd() static
  platform/x86: intel_pmc_ipc: Make intel_pmc_ipc_simple_command() static
  platform/x86: intel_pmc_ipc: Make intel_pmc_gcr_update() static
  platform/x86: intel_scu_ipc: Reformat kernel-doc comments of exported functions
  platform/x86: intel_scu_ipc: Drop intel_scu_ipc_raw_command()
  platform/x86: intel_scu_ipc: Drop intel_scu_ipc_io[read|write][8|16]()
  platform/x86: intel_scu_ipc: Drop unused macros
  platform/x86: intel_scu_ipc: Drop unused prototype intel_scu_ipc_fw_update()
  platform/x86: intel_scu_ipc: Sleeping is fine when polling
  platform/x86: intel_scu_ipc: Drop intel_scu_ipc_i2c_cntrl()
  platform/x86: intel_scu_ipc: Remove Lincroft support
  platform/x86: intel_scu_ipc: Add constants for register offsets
  platform/x86: intel_scu_ipc: Fix interrupt support
  platform/x86: intel_scu_ipcutil: Remove default y from Kconfig
  ...

Pull MMC updates from Ulf Hansson:
 "There are no updates for the MEMSTICK subsystem this time. But note
  that I am also carrying a patch from the pinctrl tree, which has been
  shared through an immutable branch.

  Summary:

  MMC core:
   - Convert to reasonable timeouts for all CMD6 commands (updates for
     BKOPS, CACHE_FLUSH and INAND_CMD38_ARG_EXT_CSD) for eMMC
   - Respect f_max clock rate at card initialization
   - Add gpiod_toggle_active_low() API
   - Consolidate slot-gpio code by using gpiod_toggle_active_low()

  MMC host:
   - Add pinctrl_select_default_state() API
   - Consolidate pintctrl code by using pinctrl_select_default_state()
   - mmci: Support any block sizes for SDIO for some variants
   - mmci: Enable reset control for stm32_sdmmc
   - mmc_spi: Toggle SPI_CS_HIGH polarity rather than hard-coding it
   - renesas_sdhi: Add support for the r8a77961 variant
   - renesas_sdhi: A few minor improvements
   - rockchip-dw-mshc: Add support for the rk3308 variant
   - sdhci: Enable support for external DMA controllers
   - sdhci: Fixup error path when sending CMD12
   - sdhci-brcmstb: Add support for 7216b0 variant
   - sdhci-brcmstb: Add support for command queuing (CQHCI)
   - sdhci-brcmstb: Add support for eMMC HS400ES mode
   - sdhci-msm: Add support for the sc7180 variant
   - sdhci-msm: Add support for command queuing (CQHCI)
   - sdhci-of-at91: Add support for the SAM9x60 variant
   - sdhci-of-at91: Improve support for tunings
   - sdhci-of-esdhc: A few fixups for some clock related issues
   - sdhci-omap: Add support for the am335x and the am437x variants
   - sdhci-omap: Improve support for erase operations
   - sdhci-omap: Add support for external DMA"

* tag 'mmc-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (89 commits)
  mmc: core: Default to generic_cmd6_time as timeout in __mmc_switch()
  mmc: block: Use generic_cmd6_time when modifying INAND_CMD38_ARG_EXT_CSD
  mmc: core: Specify timeouts for BKOPS and CACHE_FLUSH for eMMC
  mmc: sdhci-cadence: remove unneeded 'inline' marker
  dt-bindings: mmc: rockchip-dw-mshc: add description for rk3308
  dt-bindings: mmc: convert rockchip dw-mshc bindings to yaml
  dt-bindings: mmc: convert synopsys dw-mshc bindings to yaml
  mmc: sdhci-msm: Add CQHCI support for sdhci-msm
  mmc: sdhci: Let a vendor driver supply and update ADMA descriptor size
  mmc: sdhci-of-esdhc: fix serious issue clock is always disabled
  mmc: sdhci-of-esdhc: fix transfer mode register reading
  mmc: sdhci-brcmstb: Fix incorrect switch to HS mode
  mmc: sdhci-brcmstb: Add support for Command Queuing (CQE)
  mmc: sdhci-brcmstb: Add shutdown callback
  mmc: sdhci-brcmstb: Fix driver to defer on clk_get defer
  mmc: sdhci-brcmstb: Add ability to use HS400ES transfer mode
  dt-bindings: mmc: brcm,sdhci-brcmstb: Add support for 7216b0
  mmc: core: limit probe clock frequency to configured f_max
  mmc: sdhci-milbeaut: Remove redundant platform_get_irq error message
  mmc: sdhci: fix an issue of mixing different types
  ...

Pull i3c updates from Boris Brezillon:
 "Core changes:

   - Make i3c_bus_set_mode() static

  Driver changes:

   - Add a per-SoC data_hold_delay property to the Cadence driver

   - Fix formatting issues in the 'CADENCE I3C MASTER IP' MAINTAINERS
     entry

   - Use devm_platform_ioremap_resource() where appropriate

   - Adjust DesignWare reattach logic"

* tag 'i3c/for-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
  i3c: master: dw: reattach device on first available location of address table
  i3c: master: cdns: convert to devm_platform_ioremap_resource
  i3c: master: dw: convert to devm_platform_ioremap_resource
  MAINTAINERS: fix style in CADENCE I3C MASTER IP entry
  i3c: master: make i3c_bus_set_mode static
  i3c: master: cdns: add data hold delay support

Pull x86 microcode update from Borislav Petkov:
 "Another boring branch this time around: mark a stub function inline,
  by Valdis Kletnieks"

* 'x86-microcode-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/microcode/AMD: Make stub function static inline

Pull RAS updates from Borislav Petkov:

 - Misc fixes to the MCE code all over the place, by Jan H. Schönherr.

 - Initial support for AMD F19h and other cleanups to amd64_edac, by
   Yazen Ghannam.

 - Other small cleanups.

* 'ras-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  EDAC/mce_amd: Make fam_ops static global
  EDAC/amd64: Drop some family checks for newer systems
  EDAC/amd64: Add family ops for Family 19h Models 00h-0Fh
  x86/amd_nb: Add Family 19h PCI IDs
  EDAC/mce_amd: Always load on SMCA systems
  x86/MCE/AMD, EDAC/mce_amd: Add new Load Store unit McaType
  x86/mce: Fix use of uninitialized MCE message string
  x86/mce: Fix mce=nobootlog
  x86/mce: Take action on UCNA/Deferred errors again
  x86/mce: Remove mce_inject_log() in favor of mce_log()
  x86/mce: Pass MCE message to mce_panic() on failed kernel recovery
  x86/mce/therm_throt: Mark throttle_active_work() as __maybe_unused

Pull EDAC updates from Borislav Petkov:
 "A totally boring branch this time around: a garden variety of small
  fixes all over the place"

* tag 'edac_for_5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
  EDAC/amd64: Do not warn when removing instances
  EDAC/sifive: Fix return value check in ecc_register()
  EDAC/aspeed: Remove unneeded semicolon
  EDAC: remove set but not used variable 'ecc_loc'
  EDAC: skx_common: downgrade message importance on missing PCI device
  EDAC/Kconfig: Fix Kconfig indentation

Pull hwmon updates from Guenter Roeck:
 "core:
   - Add support for enable attributes to hwmon core
   - Add intrusion templates

  pmbus:
   - Support for Infineon Multi-phase xdpe122 family controllers
   - Support for Intel IMVP9 and AMD 6.25mV modes
   - Support for vid mode detection per page bases
   - Detect if chip is write protected
   - Support for MAX20730, MAX20734, MAX20743, MAX20796, UCD90320,
     TPS53688
   - Various improvements to ibm-cffps driver

  k10temp:
   - Support for additional temperature sensors as well as voltage and
     current telemetry for Zen CPUs

  w83627ehf:
   - Remove support for NCT6775, NCT6776 (they have their own driver)

  New drivers:
   - ADM1177
   - MAX31730
   - Driver for disk and solid state drives with temperature sensors

  Other:
   - pwm-fan: stop fan on shutdown"

* tag 'hwmon-for-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (35 commits)
  hwmon: (k10temp) Display up to eight sets of CCD temperatures
  hwmon: (k10temp) Add debugfs support
  hwmon: (k10temp) Don't show temperature limits on Ryzen (Zen) CPUs
  hwmon: (k10temp) Show core and SoC current and voltages on Ryzen CPUs
  hwmon: (k10temp) Report temperatures per CPU die
  hmon: (k10temp) Convert to use devm_hwmon_device_register_with_info
  hwmon: (k10temp) Use bitops
  hwmon: (pwm-fan) stop fan on shutdown
  MAINTAINERS: add entry for ADM1177 driver
  dt-binding: hwmon: Add documentation for ADM1177
  hwmon: (adm1177) Add ADM1177 Hot Swap Controller and Digital Power Monitor driver
  docs: hwmon: Include 'xdpe12284.rst' into docs
  hwmon: (pmbus) Add support for Infineon Multi-phase xdpe122 family controllers
  hwmon: (pmbus/tps53679) Extend device list supported by driver
  hwmon: (pmbus/core) Add support for Intel IMVP9 and AMD 6.25mV modes
  hwmon: (pmbus/core) Add support for vid mode detection per page bases
  hwmon: (pmbus/ibm-cffps) Prevent writing on_off_config with bad data
  hwmon: (w83627ehf) Remove set but not used variable 'fan4min'
  hwmon: Driver for disk and solid state drives with temperature sensors
  hwmon: (pmbus/ibm-cffps) Fix the LED behavior when turned off
  ...

Pull tpm updates from Jarkko Sakkinen:
 "This adds a new sysfs file for querying TPM major version, which can
  be used by the user space the TPM protocol used to communicate with
  the chip"

* tag 'tpmdd-next-20200122' of git://git.infradead.org/users/jjs/linux-tpmdd:
  tpm: Add tpm_version_major sysfs file
  tpm: Update mailing list contact information in sysfs-class-tpm

Pull m68k updates from Geert Uytterhoeven:

 - wire up clone3() syscall

 - defconfig updates

* tag 'm68k-for-v5.6-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k: Implement copy_thread_tls()
  m68k: defconfig: Update defconfigs for v5.5-rc3
  m68k: Wire up clone3() syscall

Pull arm64 updates from Will Deacon:
 "The changes are a real mixed bag this time around.

  The only scary looking one from the diffstat is the uapi change to
  asm-generic/mman-common.h, but this has been acked by Arnd and is
  actually just adding a pair of comments in an attempt to prevent
  allocation of some PROT values which tend to get used for
  arch-specific purposes. We'll be using them for Branch Target
  Identification (a CFI-like hardening feature), which is currently
  under review on the mailing list.

  New architecture features:

   - Support for Armv8.5 E0PD, which benefits KASLR in the same way as
     KPTI but without the overhead. This allows KPTI to be disabled on
     CPUs that are not affected by Meltdown, even is KASLR is enabled.

   - Initial support for the Armv8.5 RNG instructions, which claim to
     provide access to a high bandwidth, cryptographically secure
     hardware random number generator. As well as exposing these to
     userspace, we also use them as part of the KASLR seed and to seed
     the crng once all CPUs have come online.

   - Advertise a bunch of new instructions to userspace, including
     support for Data Gathering Hint, Matrix Multiply and 16-bit
     floating point.

  Kexec:

   - Cleanups in preparation for relocating with the MMU enabled

   - Support for loading crash dump kernels with kexec_file_load()

  Perf and PMU drivers:

   - Cleanups and non-critical fixes for a couple of system PMU drivers

  FPU-less (aka broken) CPU support:

   - Considerable fixes to support CPUs without the FP/SIMD extensions,
     including their presence in heterogeneous systems. Good luck
     finding a 64-bit userspace that handles this.

  Modern assembly function annotations:

   - Start migrating our use of ENTRY() and ENDPROC() over to the
     new-fangled SYM_{CODE,FUNC}_{START,END} macros, which are intended
     to aid debuggers

  Kbuild:

   - Cleanup detection of LSE support in the assembler by introducing
     'as-instr'

   - Remove compressed Image files when building clean targets

  IP checksumming:

   - Implement optimised IPv4 checksumming routine when hardware offload
     is not in use. An IPv6 version is in the works, pending testing.

  Hardware errata:

   - Work around Cortex-A55 erratum #1530923

  Shadow call stack:

   - Work around some issues with Clang's integrated assembler not
     liking our perfectly reasonable assembly code

   - Avoid allocating the X18 register, so that it can be used to hold
     the shadow call stack pointer in future

  ACPI:

   - Fix ID count checking in IORT code. This may regress broken
     firmware that happened to work with the old implementation, in
     which case we'll have to revert it and try something else

   - Fix DAIF corruption on return from GHES handler with pseudo-NMIs

  Miscellaneous:

   - Whitelist some CPUs that are unaffected by Spectre-v2

   - Reduce frequency of ASID rollover when KPTI is compiled in but
     inactive

   - Reserve a couple of arch-specific PROT flags that are already used
     by Sparc and PowerPC and are planned for later use with BTI on
     arm64

   - Preparatory cleanup of our entry assembly code in preparation for
     moving more of it into C later on

   - Refactoring and cleanup"

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (73 commits)
  arm64: acpi: fix DAIF manipulation with pNMI
  arm64: kconfig: Fix alignment of E0PD help text
  arm64: Use v8.5-RNG entropy for KASLR seed
  arm64: Implement archrandom.h for ARMv8.5-RNG
  arm64: kbuild: remove compressed images on 'make ARCH=arm64 (dist)clean'
  arm64: entry: Avoid empty alternatives entries
  arm64: Kconfig: select HAVE_FUTEX_CMPXCHG
  arm64: csum: Fix pathological zero-length calls
  arm64: entry: cleanup sp_el0 manipulation
  arm64: entry: cleanup el0 svc handler naming
  arm64: entry: mark all entry code as notrace
  arm64: assembler: remove smp_dmb macro
  arm64: assembler: remove inherit_daif macro
  ACPI/IORT: Fix 'Number of IDs' handling in iort_id_map()
  mm: Reserve asm-generic prot flags 0x10 and 0x20 for arch use
  arm64: Use macros instead of hard-coded constants for MAIR_EL1
  arm64: Add KRYO{3,4}XX CPU cores to spectre-v2 safe list
  arm64: kernel: avoid x18 in __cpu_soft_restart
  arm64: kvm: stop treating register x18 as caller save
  arm64/lib: copy_page: avoid x18 register in assembler code
  ...

- voltage support for newer Logitech HID++ devices, from Pedro Vanzella.

- MX Master support improvements, from Adrian Freund and Mazin Rezk

- support for uniq ioctl()

Pull io_uring fixes from Jens Axboe:
 "Fix for two regressions in this cycle, both reported by the postgresql
  use case.

  One removes the added restriction on who can submit IO, making it
  possible for rings shared across forks to do so. The other fixes an
  issue for the same kind of use case, where one exiting process would
  cancel all IO"

* tag 'io_uring-5.5-2020-01-26' of git://git.kernel.dk/linux-block:
  io_uring: don't cancel all work on process exit
  Revert "io_uring: only allow submit from owning task"

Pull block fix from Jens Axboe:
 "Unfortunately this weekend we had a few last minute reports, one was
  for block.

  The partition disable for zoned devices was overly restrictive, it can
  work (and be supported) just fine for host-aware variants.

  Here's a fix ensuring that's the case so we don't break existing users
  of that"

* tag 'block-5.5-2020-01-26' of git://git.kernel.dk/linux-block:
  block: allow partitions on host aware zone devices

Pull SCSI fixes from James Bottomley:
 "Two last minute fixes, both in drivers.

  The fnic one is a highly unlikely condition, but the RDMA one is a
  recently introduced regression that causes a kernel warning to trigger
  in every RDMA logon, which would be unsightly if it got into the final
  release"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: RDMA/isert: Fix a recently introduced regression related to logout
  scsi: fnic: do not queue commands during fwreset

Pull vfs fix from Al Viro:
 "Fix a use-after-free in do_last() handling of sysctl_protected_...
  checks.

  The use-after-free normally doesn't happen there, but race with
  rename() and it becomes possible"

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  do_last(): fetch directory ->i_mode and ->i_uid before it's too late

If we're sharing the ring across forks, then one process exiting means
that we cancel ALL work and prevent future work. This is overly
restrictive. As long as we cancel the work associated with the files
from the current task, it's safe to let others persist. Normal fd close
on exit will still wait (and cancel) pending work.

Fixes: fcb323cc ("io_uring: io_uring: add support for async work inheriting files")
Reported-by: Andres Freund <andres@anarazel.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Host-aware SMR drives can be used with the commands to explicitly manage
zone state, but they can also be used as normal disks.  In the former
case it makes perfect sense to allow partitions on them, in the latter
it does not, just like for host managed devices.  Add a check to
add_partition to allow partitions on host aware devices, but give
up any zone management capabilities in that case, which also catches
the previously missed case of adding a partition vs just scanning it.

Because sd can rescan the attribute at runtime it needs to check if
a disk has partitions, for which a new helper is added to genhd.h.

Fixes: 5eac3eb3 ("block: Remove partition support for zoned block devices")
Reported-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

This ends up being too restrictive for tasks that willingly fork and
share the ring between forks. Andres reports that this breaks his
postgresql work. Since we're close to 5.5 release, revert this change
for now.

Cc: stable@vger.kernel.org
Fixes: 44d28279 ("io_uring: only allow submit from owning task")
Reported-by: Andres Freund <andres@anarazel.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

The afs filesystem needs to prohibit certain characters from cell names,
such as '/', as these are used to form filenames in procfs, leading to
the following warning being generated:

	WARNING: CPU: 0 PID: 3489 at fs/proc/generic.c:178

Fix afs_alloc_cell() to disallow nonprintable characters, '/', '@' and
names that begin with a dot.

Remove the check for "@cell" as that is then redundant.

This can be tested by running:

	echo add foo/.bar 1.2.3.4 >/proc/fs/afs/cells

Note that we will also need to deal with:

 - Names ending in ".invalid" shouldn't be passed to the DNS.

 - Names that contain non-valid domainname chars shouldn't be passed to
   the DNS.

 - DNS replies that say "your-dns-needs-immediate-attention.<gTLD>" and
   replies containing A records that say 127.0.53.53 should be
   considered invalid.
   [https://www.icann.org/en/system/files/files/name-collision-mitigation-01aug14-en.pdf]

but these need to be dealt with by the kafs-client DNS program rather
than the kernel.

Reported-by: syzbot+b904ba7c947a37b4b291@syzkaller.appspotmail.com
Cc: stable@kernel.org
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

may_create_in_sticky() call is done when we already have dropped the
reference to dir.

Fixes: 30aba665 (namei: allow restricted O_CREAT of FIFOs and regular files)
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Pull ARM fixes from Russell King:

 - fix ftrace relocation type filtering

 - relax arch timer version check

* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 8955/1: virt: Relax arch timer version check during early boot
  ARM: 8950/1: ftrace/recordmcount: filter relocation types

Pull networking fixes from David Miller:

 1) Off by one in mt76 airtime calculation, from Dan Carpenter.

 2) Fix TLV fragment allocation loop condition in iwlwifi, from Luca
    Coelho.

 3) Don't confirm neigh entries when doing ipsec pmtu updates, from Xu
    Wang.

 4) More checks to make sure we only send TSO packets to lan78xx chips
    that they can actually handle. From James Hughes.

 5) Fix ip_tunnel namespace move, from William Dauchy.

 6) Fix unintended packet reordering due to cooperation between
    listification done by GRO and non-GRO paths. From Maxim
    Mikityanskiy.

 7) Add Jakub Kicincki formally as networking co-maintainer.

 8) Info leak in airo ioctls, from Michael Ellerman.

 9) IFLA_MTU attribute needs validation during rtnl_create_link(), from
    Eric Dumazet.

10) Use after free during reload in mlxsw, from Ido Schimmel.

11) Dangling pointers are possible in tp->highest_sack, fix from Eric
    Dumazet.

12) Missing *pos++ in various networking seq_next handlers, from Vasily
    Averin.

13) CHELSIO_GET_MEM operation neds CAP_NET_ADMIN check, from Michael
    Ellerman.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (109 commits)
  firestream: fix memory leaks
  net: cxgb3_main: Add CAP_NET_ADMIN check to CHELSIO_GET_MEM
  net: bcmgenet: Use netif_tx_napi_add() for TX NAPI
  tipc: change maintainer email address
  net: stmmac: platform: fix probe for ACPI devices
  net/mlx5e: kTLS, Do not send decrypted-marked SKBs via non-accel path
  net/mlx5e: kTLS, Remove redundant posts in TX resync flow
  net/mlx5e: kTLS, Fix corner-case checks in TX resync flow
  net/mlx5e: Clear VF config when switching modes
  net/mlx5: DR, use non preemptible call to get the current cpu number
  net/mlx5: E-Switch, Prevent ingress rate configuration of uplink rep
  net/mlx5: DR, Enable counter on non-fwd-dest objects
  net/mlx5: Update the list of the PCI supported devices
  net/mlx5: Fix lowest FDB pool size
  net: Fix skb->csum update in inet_proto_csum_replace16().
  netfilter: nf_tables: autoload modules from the abort path
  netfilter: nf_tables: add __nft_chain_type_get()
  netfilter: nf_tables_offload: fix check the chain offload flag
  netfilter: conntrack: sctp: use distinct states for new SCTP connections
  ipv6_route_seq_next should increase position index
  ...

Pull ARM SoC fixes from Olof Johansson:
 "A couple of fixes have come in that would be good to include in this
  release:

   - A fix for amount of memory on Beaglebone Black. Surfaced now since
     GRUB2 doesn't update memory size in the booted kernel.

   - A fix to make SPI interfaces work on am43x-epos-evm.

   - Small Kconfig fix for OPTEE (adds a depend on MMU) to avoid build
     failures"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  ARM: dts: am43x-epos-evm: set data pin directions for spi0 and spi1
  tee: optee: Fix compilation issue with nommu
  ARM: dts: am335x-boneblack-common: fix memory size

In fs_open(), 'vcc' is allocated through kmalloc() and assigned to
'atm_vcc->dev_data.' In the following execution, if an error occurs, e.g.,
there is no more free channel, an error code EBUSY or ENOMEM will be
returned. However, 'vcc' is not deallocated, leading to memory leaks. Note
that, in normal cases where fs_open() returns 0, 'vcc' will be deallocated
in fs_close(). But, if fs_open() fails, there is no guarantee that
fs_close() will be invoked.

To fix this issue, deallocate 'vcc' before the error code is returned.
Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>