- 23 Dec, 2015 29 commits
-
-
Mark Brown authored
Merge remote-tracking branches 'asoc/topic/da7219', 'asoc/topic/dai-link' and 'asoc/topic/doc' into asoc-next
-
Mark Brown authored
Merge remote-tracking branches 'asoc/topic/atmel-classd', 'asoc/topic/const' and 'asoc/topic/da7218' into asoc-next
-
Mark Brown authored
Merge remote-tracking branches 'asoc/topic/ac97', 'asoc/topic/adsp', 'asoc/topic/ak4613' and 'asoc/topic/atmel' into asoc-next
-
Mark Brown authored
-
Mark Brown authored
-
Mark Brown authored
-
Mark Brown authored
-
Mark Brown authored
-
Mark Brown authored
-
Mark Brown authored
Merge remote-tracking branches 'asoc/fix/davinci', 'asoc/fix/es8328', 'asoc/fix/fsl-sai', 'asoc/fix/rockchip', 'asoc/fix/sgtl5000' and 'asoc/fix/wm8974' into asoc-linus
-
Linus Walleij authored
As we want gpio_chip .get() calls to be able to return negative error codes and propagate to drivers, we need to go over all drivers and make sure their return values are clamped to [0,1]. We do this by using the ret = !!(val) design pattern. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Charles Keepax authored
The stream is created whilst the compressed stream is opened and a buffer is created when the DSP powers up. It is necessary at a point once both the DSP has powered up and the the stream has been opened to connect a stream to a buffer on the DSP. This is done in the trigger callback as this is after the DSP has been powered and obviously the stream must be open. Note that whilst the connect is currently trivial it is expected that this will get more complex when support for multiple buffers/streams per DSP is added. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Charles Keepax authored
Add code that locates and initialises the buffer of compressed data on the DSP if the firmware supported compressed data capture. The buffer struct (wm_adsp_compr_buf) is kept separate from the stream struct (wm_adsp_compr) this will allow much easier support of multiple streams of data from the one DSP in the future, although support for this will not be added in this patch chain. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Charles Keepax authored
Allow user-space to open a compressed stream, although no data will be passed yet, as part of this adding the ability to define supported capabilities per firmware and check these match the stream being opened. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Charles Keepax authored
When working with the compressed framework occasionally vendors will use esoteric internal audio formats. For such formats it doesn't really make sense to add an new define to the kernel as their use is not sufficiently general. This patch adds a new define SND_AUDIOCODEC_BESPOKE that vendors can use in such situations. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Charles Keepax authored
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Charles Keepax authored
Register a platform driver for the CODEC and add DAIs that will be used to connect a compressed record path for the voice control functionality. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Mark Brown authored
Merge branch 'topic/cs47l24' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-adsp
-
Mark Brown authored
Merge branch 'topic/arizona' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-adsp
-
Adam Thomson authored
PLL mode based on 32KHz master clock not supported in AB silicon so remove support from the driver. Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Adam Thomson authored
HW can provide 1.6V micbias level as well the existing levels already provided in the driver. This patch adds support for 1.6V to the DT binding. Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Adam Thomson authored
In AB silicon, the internal LDO is not supported so remove DT and driver references to this (digital voltage direct from 'VDD' supply) Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Adam Thomson authored
In current AB silicon, BIAS_EN field is enabled by default in the REFERENCES register, so the regmap default value should reflect this. Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Adam Thomson authored
If codec probe() function fails after supplies have been enabled it should really tidy up and disable them again. This patch updates the probe function to do just that. Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Adam Thomson authored
Previously Sidetone would operate only when capture to DAI was in progress, due to DAPM path configuration. There is no reason why this should not operate without DAI capture, so this patch updates the DAPM path accordingly. Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Songjun Wu authored
Sometimes the audio play can not be resumed after it is suspended. Add snd_soc_pm_ops to execute power management operations, then this issue is fixed. Signed-off-by: Songjun Wu <songjun.wu@atmel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Julia Lawall authored
Add NULL test on call to devm_kzalloc. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression x; identifier fld; @@ * x = devm_kzalloc(...); ... when != x == NULL x->fld // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Julia Lawall authored
Add NULL test on call to devm_kzalloc. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression x; identifier fld; @@ * x = devm_kzalloc(...); ... when != x == NULL x->fld // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Julia Lawall authored
Add NULL test on call to devm_kzalloc. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression x; @@ * x = devm_kzalloc(...); ... when != x == NULL *x // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Nicolin Chen <nicoleotsuka@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
- 22 Dec, 2015 2 commits
-
-
Adam Thomson authored
This patch adds support to the codec driver to handle mic level detect related IRQs, and report these to user-space using a uevent variable. The uevent variable string "EVENT=MIC_LEVEL_DETECT" is sent to user-space, if the mic level detect feature is enabled, and the audio captured at the chosen mic(s) is above a certain threshold. User-space can then handle the event accordingly (e.g. process audio capture stream). This method was chosen over ALSA control notification for a couple of reasons: 1) There's no requirement here for a control to read state from. The event is the only thing that's required and of interest. 2) tinyalsa support for control notifications does not exist so on platforms using this over alsa-lib there is a need to add code to support this event handling. Another possible option would be to use the standard Jack reporting framework but this really does not fit for this kind of event. Finally, use of the input device framework is not being encouraged, due to difficulties in enabling apps to access input devices, so this has also been avoided. Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
Hans de Goede authored
An external amp (if any) is connected to the external outputs of the SoC of course, rather then directly to the internal amp. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
- 21 Dec, 2015 1 commit
-
-
Linus Torvalds authored
-
- 20 Dec, 2015 7 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linuxLinus Torvalds authored
Pull RTC fixes from Alexandre Belloni: "Late fixes for the RTC subsystem for 4.4: A fix for a nasty hardware bug in rk808 and an initialization reordering in da9063 to fix a possible crash" * tag 'rtc-4.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: rtc: da9063: fix access ordering error during RTC interrupt at system power on rtc: rk808: Compensate for Rockchip calendar deviation on November 31st
-
Steve Twiss authored
This fix alters the ordering of the IRQ and device registrations in the RTC driver probe function. This change will apply to the RTC driver that supports both DA9063 and DA9062 PMICs. A problem could occur with the existing RTC driver if: A system is started from a cold boot using the PMIC RTC IRQ to initiate a power on operation. For instance, if an RTC alarm is used to start a platform from power off. The existing driver IRQ is requested before the device has been properly registered. i.e. ret = devm_request_threaded_irq() comes before rtc->rtc_dev = devm_rtc_device_register(); In this case, the interrupt can be called before the device has been registered and the handler can be called immediately. The IRQ handler da9063_alarm_event() contains the function call rtc_update_irq(rtc->rtc_dev, 1, RTC_IRQF | RTC_AF); which in turn tries to access the unavailable rtc->rtc_dev. The fix is to reorder the functions inside the RTC probe. The IRQ is requested after the RTC device resource has been registered so that get_irq_byname is the last thing to happen. Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
-
Julius Werner authored
In A.D. 1582 Pope Gregory XIII found that the existing Julian calendar insufficiently represented reality, and changed the rules about calculating leap years to account for this. Similarly, in A.D. 2013 Rockchip hardware engineers found that the new Gregorian calendar still contained flaws, and that the month of November should be counted up to 31 days instead. Unfortunately it takes a long time for calendar changes to gain widespread adoption, and just like more than 300 years went by before the last Protestant nation implemented Greg's proposal, we will have to wait a while until all religions and operating system kernels acknowledge the inherent advantages of the Rockchip system. Until then we need to translate dates read from (and written to) Rockchip hardware back to the Gregorian format. This patch works by defining Jan 1st, 2016 as the arbitrary anchor date on which Rockchip and Gregorian calendars are in sync. From that we can translate arbitrary later dates back and forth by counting the number of November/December transitons since the anchor date to determine the offset between the calendars. We choose this method (rather than trying to regularly "correct" the date stored in hardware) since it's the only way to ensure perfect time-keeping even if the system may be shut down for an unknown number of years. The drawback is that other software reading the same hardware (e.g. mainboard firmware) must use the same translation convention (including the same anchor date) to be able to read and write correct timestamps from/to the RTC. Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds authored
Pull tty/serial fixes from Greg KH: "Here are some tty/serial driver fixes for 4.4-rc6 that resolve some reported problems. All of these have been in linux-next. The details are in the shortlog" * tag 'tty-4.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: tty: Fix GPF in flush_to_ldisc() serial: earlycon: Add missing spinlock initialization serial: sh-sci: Fix length of scatterlist n_tty: Fix poll() after buffer-limited eof push read serial: 8250_uniphier: fix dl_read and dl_write functions
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB fixes from Greg KH: "Here are some USB and PHY fixes for 4.4-rc6. All of them resolve some reported problems. Full details in the shortlog" * tag 'usb-4.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: USB: fix invalid memory access in hub_activate() USB: ipaq.c: fix a timeout loop phy: core: Get a refcount to phy in devm_of_phy_get_by_index() phy: cygnus: pcie: add missing of_node_put phy: miphy365x: add missing of_node_put phy: miphy28lp: add missing of_node_put phy: rockchip-usb: add missing of_node_put phy: berlin-sata: add missing of_node_put phy: mt65xx-usb3: add missing of_node_put phy: brcmstb-sata: add missing of_node_put phy: sun9i-usb: add USB dependency
-
git://neil.brown.name/mdLinus Torvalds authored
Pull md fixes from Neil Brown: "Four fixes for md: - two recently introduced regressions fixed. - one older bug in RAID10 - tagged for -stable since 4.2 - one minor sysfs api improvement" * tag 'md/4.4-rc5-fixes' of git://neil.brown.name/md: Fix remove_and_add_spares removes drive added as spare in slot_store md: fix bug due to nested suspend MD: change journal disk role to disk 0 md/raid10: fix data corruption and crash during resync
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: - Partial revert of "powerpc: Individual System V IPC system calls" - pr_warn_once on unsupported OPAL_MSG type from Stewart - Fix deadlock in opal-irqchip introduced by "Fix double endian conversion" from Alistair * tag 'powerpc-4.4-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/opal-irqchip: Fix deadlock introduced by "Fix double endian conversion" powerpc/powernv: pr_warn_once on unsupported OPAL_MSG type Partial revert of "powerpc: Individual System V IPC system calls"
-
- 19 Dec, 2015 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spiLinus Torvalds authored
Pull spi fixes from Mark Brown: "A couple of reference counting bugs here, one in spidev and one with holding an extra reference in the core that we never freed if we removed a device, plus a driver specific fix. Both of the refcounting bugs are very old but they've only been found by observation so hopefully their impact has been low" * tag 'spi-fix-v4.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: fix parent-device reference leak spi: spidev: Hold spi_lock over all defererences of spi in release() spi-fsl-dspi: Fix CTAR Register access
-