Checkpatch emits WARNING: quoted string split across lines. Line is
already over 80 characters long, adding 3 more does little to effect
line length while improving readibility.

Concatenate split string into single line.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Checkpatch emits various warnings and checks;

WARNING: Avoid multiple line dereference
CHECK: Alignment should match open parenthesis
WARNING: line over 80 characters
CHECK: Blank lines aren't necessary before a close brace '}'

These are all whitespace fixes.

Refactor whitespace inline with kernel coding style. Fix various
checkpatch warnings.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Checkpatch emits CHECK: Logical continuations should be on the
previous line. Also the same code section causes checkpatch to emit
WARNING: Avoid multiple line dereference.

Move logical line continuations onto the previous line. Move multiple
line dereferences onto single line.

Make these two changes in a single patch to give review a chance
to critique the final layout of the *complex* logical statement.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Code is deeply nested. One level of indentation may be removed by
inverting if statement conditional.

Invert conditional, return if new conditional evaluates to true.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Checkpatch emits WARNING: Too many leading tabs - consider code
refactoring. Function contains 5 levels of nesting and 14 local
variables. Code can be simplified and nesting reduced by refactoring
into separate functions.

WPA code is contained and may be factored out into a separate
function. This will reduce the length and complexity of
hostif_data_indication(). At times within the WPA code errors result
in the function returning. In order to maintain this behaviour new
function should return a status integer.

Factor out WPA code into separate function. Add only code needed to
get compilation to pass, including modifying return statements. Make
no other code changes, program logic is unchanged.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This supports spelling unicode characters by just passing them to
the speech synthesis in direct mode.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

9831013c ('speakup: convert screen
reading to 16bit characters') paved the way for handling unicode
characters in speakup, but for the review mode, it missed actually
getting unicode characters from the VC. This fixes by just turning the
use_unicode parameter to 1.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Tested-by: Zahari Yurukov <zahari.yurukov@gmail.com>
Reviewed-by: Chris Brannon <chris@the-brannons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix checkpatch issues: "CHECK: Alignment should match open parenthesis".
Signed-off-by: Arushi Singhal <arushisinghal19971997@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixed alignment of block commenents across whole driver.
Found using checkpatch.
Signed-off-by: Derek Robson <robsonde@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Changed permissions to octal across whole driver
Found by checkpatch
Signed-off-by: Derek Robson <robsonde@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

All devm functions has a device structure as the first argument which is
required by dev_{err,info,dbg} printing functions.
This patch converts pr_err to dev_err as dev_* is preferred after calls
to devm functions.

Done using coccinelle:

@r1 exists@
expression e,e1;
identifier f =~ "^devm_";
identifier g =~ "^pcim_";
identifier h =~ "^dmam_";
@@
e=\(f\|g\|h\)(e1,...);
<+...
(
- pr_info(
+ dev_info(e1,
   ...);
|
- pr_err(
+ dev_err(e1,
  ...);
|
- pr_debug(
+ dev_dbg(e1,
  ...);
)
...+>
Signed-off-by: simran singhal <singhalsimran0@gmail.com>
Acked-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Reduce the indentation level in spk_msg_set and remove
unnecessary return variable.
Signed-off-by: Narcisa Ana Maria Vasile <narcisaanamaria12@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The possible return values (0 or 1) for compare_specifiers
and fmt_validate represent whether a condition holds or not, so
conceptually, they are booleans.

Update documentation for these two functions.

Change type of variable 'still_comparing' from int to bool too,
inside fmt_validate, because it is intended to hold truth values
as well.
Signed-off-by: Narcisa Ana Maria Vasile <narcisaanamaria12@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: Alex Yashchenko <alexhoppus111@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix bad indentation as reported by checkpatch.pl script.
Signed-off-by: Thibaut SAUTEREAU <thibaut.sautereau@telecom-sudparis.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The patch resolves the checkpatch warning:
WARNING: function definition argument should also have an identifier name
Signed-off-by: sayli karnik <karniksayli1995@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The sematic patch used for this is:
@@
identifier i;
constant c;
@@
return
- (
    \(i\|-i\|i(...)\|c\)
- )
  ;
Signed-off-by: simran singhal <singhalsimran0@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The sematic patch used for this is:
@@
identifier i;
constant c;
@@
return
- (
    \(i\|-i\|i(...)\|c\)
- )
  ;
Signed-off-by: simran singhal <singhalsimran0@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sparse report fixed:
drivers/staging//wlan-ng//hfa384x_usb.c:3517:35: warning: restricted __be64 degrades to integer
drivers/staging//wlan-ng//hfa384x_usb.c:3517:33: warning: incorrect type in assignment (different base types)
drivers/staging//wlan-ng//hfa384x_usb.c:3517:33:    expected restricted __be64 [usertype] mactime
drivers/staging//wlan-ng//hfa384x_usb.c:3517:33:    got unsigned long long

Computation on the value should be done when in machine format, not in big endian format.
Signed-off-by: Adrien Descamps <adrien.descamps@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix some sparse warning by using correct endian types in structs and
local variables.
This patch only fix sparse warnings and do not change the logic.
Signed-off-by: Adrien Descamps <adrien.descamps@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes following checkpatch warning:

	"WARNING: %Lx is non-standard C, use %llx"
Signed-off-by: Manoj Sawai <mas@iitkgp.ac.in>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixed style of block comments across whole driver
Found using checkpatch
Signed-off-by: Derek Robson <robsonde@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Anonymous field declarations are error prone. This patch replaces
anonymous declarations with explicit field declarations for typedef
SERVICE_CREATION_T in vchiq_mmal_init(..)
Signed-off-by: Aishwarya Pant <aishpant@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Anonymous field declarations are error prone. This patch replaces
anonymous declarations with explicit field declarations for typedef
SERVICE_CREATION_T in vc_vchi_audio_init(..)
Signed-off-by: Aishwarya Pant <aishpant@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix prefer kernel type 'u32' over 'uint32_t' checks.
Signed-off-by: Shiva Kerdel <shiva@exdev.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix prefer kernel type 'u16' over 'uint16_t' checks.
Signed-off-by: Shiva Kerdel <shiva@exdev.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix prefer kernel type 'u8' over 'uint8_t' checks.
Signed-off-by: Shiva Kerdel <shiva@exdev.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Change the MODULE_DESCRIPTION string from the generic "Comedi low-level
driver" to the more specific "Comedi driver for JR3/PCI force sensor
board".
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

`jr3_pci_alloc_spriv()` initializes `spriv->range[8]` to use a maximum
value of 65536, but that will be overwritten with 65535 at a later time
by `jr3_pci_poll_subdevice()` once the "set full scales" command is
complete.  The initial setting looks like a mistake.  This range is only
associated with a couple of dummy channels (channels 56 and 57) to read
back the model number and serial number, so no user code should be
attempting to convert those numbers to physical units.  Just change the
initial value to 65535 to match the final value.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The various supported boards have different numbers of subdevices from 1
to 4.  Each subdevice needs a block of registers in PCI BAR 0.  Check
the region is large enough for the required number of subdevices.
Return an error from `jr3_pci_auto_attach()` if it is too small.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The driver currently checks the size of `struct jr3_sensor` is correct
when a device is attached, returning an error if it is wrong.  Replace
that with a compile-time check.  We don't care too much about the size
of `struct jr3_sensor` as it is embedded in the larger `struct
jr3_block` and is followed by a lot of padding.  We should care more
that the size of `struct jr3_block` is correct, as it describes the
overall register layout of a block, and there is an array of such blocks
(one per subdevice).  Check its size at compile-time using the
`BUILD_BUG_ON()` macro.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

`jr3_pci_open()` outputs several debug log messages containing serial
numbers of the sensors (one per subdevice) along with a pointer to the
subdevice private data structure.  The latter is of no use, so reformat
the debug log to omit it.

`jr3_pci_alloc_spriv()` outputs a debug log message containing more
useless information about the remapped base address of the board
registers, the sensor registers, and the difference between them.  Get
rid of it.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

`struct jr3_t` contains a single array member `block` of member type
`struct jr3_block`.  Rather than using pointers to `struct jr3_t`, just
use pointers to `struct jr3_block` instead and treat it as an array.
Replace the local variables `struct jr3_t __iomem *iobase` with `struct
jr3_block __iomem *block`.  Remove the definition of `struct jr3_t` as
it is no longer needed.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

`struct jr3_t` contains a single array member `block` of a tag-less
`struct` type.  Rename the tag-less `struct` type to `struct jr3_block`
and move its definition outside of `struct jr3_t`.  This will allow us
to use pointers of this type.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The term "channel" is overloaded in this driver.  Rename the `channel`
member of `struct jr3_t` to `block` to reduce confusion.  `block` is an
array of an anonymous `struct` type, with each element covering the
registers for one subdevice.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename the `channel[x].data` member of `struct jr3_t` to
`channel[x].sensor` to match its type `struct jr3_sensor`.  Also rename
local variable `ch0data` in `jr3_pci_show_copyright()` to `sensor0` for
consistency.  It points to the `struct jr3_sensor` embedded in the
registers for "channel" 0.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The driver overloads the term "channel" a lot.  To help reduce
confusion, rename the `channel` member of `struct
jr3_pci_subdev_private` to `sensor` as it points to a `struct
jr3_sensor`.  Also rename the various function parameters and local
variables called `channel` that point to a `struct jr3_sensor` to
`sensor`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The driver overloads the term "channel" a lot.  To help reduce
confusion, rename `struct jr3_channel` to `struct jr3_sensor`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There is no need to check if ret is non-zero, remove this
redundant check and just return the error status from the call
to mt9m114_write_reg_array.

Detected by CoverityScan, CID#1416577 ("Identical code for
different branches")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The previous statement checks if client is null, so the null check
when assigning dev is redundant and can be removed.

Detected by CoverityScan, CID#1416555 ("Logically Dead Code")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>