- 31 Dec, 2009 2 commits
-
-
Peter Ujfalusi authored
In order to have support for more FIFO modes supported by tlv320dac33, the switch for enabling/disabling the FIFO use has to be replaced with an enum. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Barry Song authored
Signed-off-by: Barry Song <21cnbao@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
- 30 Dec, 2009 6 commits
-
-
Kuninori Morimoto authored
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Kuninori Morimoto authored
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Kuninori Morimoto authored
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Barry Song authored
PM architecture of ad1938 is simple, we don't need a bundle of functions like ad1938_pll_powerctrl, ad1938_set_bias_level for only PLL. A dapm supply will handle on/off of PLL. Since soc-core can poweron/off PLL on-demand, we don't need to poweron/off PLL in suspend/resume entries too. Signed-off-by: Barry Song <21cnbao@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Barry Song authored
Signed-off-by: Barry Song <21cnbao@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Barry Song authored
Tests show frequent suspend/resume(frequent poweroff/on ad1836 internal components) maybe make ad1836 clock mode wrong sometimes after wakeup. This patch reset/restore ad1836 clock mode while executing PM, then ad1836 can always resume to right clock status. Signed-off-by: Barry Song <21cnbao@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
- 18 Dec, 2009 5 commits
-
-
Mark Brown authored
Avoids skipping over the read for disable cases. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Mark Brown authored
-
Mark Brown authored
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
-
Mark Brown authored
The WM8955 is a low power, high quality stereo DAC with integrated headphone and loudspeaker amplifiers, designed to reduce external component requirements in portable digital audio applications. This is an initial driver implementing support for the majority of the functionality in the device, currently OUT3 is not supported. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
-
Guennadi Liakhovetski authored
The wm8974 datasheet defines BUFIOEN as bit 2. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
-
- 16 Dec, 2009 12 commits
-
-
Mark Brown authored
DAC_VOICE_EN was not defined - looks to have been overly enthusiastically deleted from a previous revision of the patch, pull the value from v1. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Peter Meerwald authored
fix precision of PLL computation for TLV320AIC3x SoC driver, test results are at http://pmeerw.net/clkSigned-off-by: Peter Meerwald <pmeerw@pmeerw.net> Acked-by: Vladimir Barinov <vova.barinov@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Mark Brown authored
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
-
Kuninori Morimoto authored
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Kuninori Morimoto authored
This original driver was created by Dialog Semiconductor, and cleanuped by Kuninori Morimoto. Special thanks to David Chen. This became very simple ASoC codec driver, and it is tested by EcoVec24 board. Signed-off-by: David Chen <Dajun.chen@diasemi.com> Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Ilkka Koskinen authored
Take the regulator framework in use for managing the power sources Signed-off-by: Ilkka Koskinen <ilkka.koskinen@nokia.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Eduardo Valentin <eduardo.valentin@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Jassi Brar authored
The driver can be 'generalized' a bit by not hardcoding '2'(the number of I2Sv3 controllers that the driver can handle) at many places, instead we define a macro for it. That makes it easier to increase number of controllers by changing the parameter at just one place, this will be useful when there is support for newer SoCs, which have the same controller, only more in number. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Jassi Brar authored
Removed redundant header includes which make no difference to compilation. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Mark Brown authored
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
-
Mark Brown authored
In preparation for multiple device support. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
-
Mark Brown authored
No need for the mixers to know about this, and it allows for virtual controls. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
-
Jon Smirl authored
Change code so that switching to playing music through the analog output disables SPDIF out instead of disabling it when stream ends. Signed-off-by: Jon Smirl <jonsmirl@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
- 15 Dec, 2009 1 commit
-
-
Kuninori Morimoto authored
If ak4642 driver was compiled without I2C configs, ak4642_modinit return value will become un-stable. This patch modify this bug Reported-by: Magnus Damm <damm@opensource.se> Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
- 14 Dec, 2009 1 commit
-
-
Julia Lawall authored
sizeof(codec->reg_cache) is just the size of the pointer. Elsewhere in the file, codec->reg_cache is used with sizeof(wm8900_reg_defaults), so the code is changed to do the same here. A simplified version of the semantic patch that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression *x; expression f; type T; @@ *f(...,(T)x,...) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
- 10 Dec, 2009 1 commit
-
-
Olof Johansson authored
There are build errors when building for some of the omap2/3 boards without enabling sound: sound/built-in.o:(.data+0x43bc): undefined reference to `soc_codec_dev_tlv320aic23' sound/built-in.o:(.data+0x43cc): undefined reference to `tlv320aic23_dai' Confused me quite a bit since the drivers that had references to the codec weren't enabled. Turns out the Makefile was using the wrong config option to enable them. Patch below. Reported-by: Anand Gadiyar <gadiyar@ti.com> Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
- 08 Dec, 2009 1 commit
-
-
Roel Kluin authored
The wrong variable was returned in the case of an error Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
- 07 Dec, 2009 1 commit
-
-
Daniel Mack authored
Signed-off-by: Daniel Mack <daniel@caiaq.de> Acked-by: Timur Tabi <timur@freescale.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
- 04 Dec, 2009 8 commits
-
-
Mark Brown authored
The WM8904 is a high performance ultra-low power stereo CODEC optimised for portable audio applications, with features including a class W amplifier, FLL with free running mode, Mobile ReTune and ground referenced headphone and line outputs. Support for some features, most particularly the digital microphone interface, is not yet present. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
-
Mark Brown authored
Make it a bit easier to tie DAPM widgets in with the register map without referring to the source by including the register location controlled by the widget. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
-
Mark Brown authored
Allows custom controls to use it. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
-
Ilkka Koskinen authored
Take the regulator framework in use for managing the power sources. Signed-off-by: Ilkka Koskinen <ilkka.koskinen@nokia.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Mark Brown authored
-
Chaithrika U S authored
Add clock enable and disable calls to resume and suspend respectively. Also add a member to the audio device data structure which tracks the clock status. Tested on DA850/OMAP-L138 EVM. For the purpose of testing, the patches[1] which add suspend-to-RAM support to DA850/OMAP-L138 SoC were applied. [1] http://linux.davincidsp.com/pipermail/davinci-linux-open-source/ 2009-November/016958.html Signed-off-by: Chaithrika U S <chaithrika@ti.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Mark Brown authored
The symbols aren't declared and don't need to be exported, they go along with the device structure. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Ben Dooks <ben-linux@fluff.org>
-
Joonyoung Shim authored
This renames from a character / to : of controls. A / occurs below error messages. ASoC: Failed to create IN2RP/VXRP debugfs file ASoC: Failed to create IN2LP/VXRN debugfs file Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
- 03 Dec, 2009 2 commits
-
-
Kuninori Morimoto authored
Current FSI driver use global variable to access device data. But this style will be broken if SuperH come with multiple FSI blocks in future. To solve this problem, this patch use cpu_dai->private_data. Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Manuel Lauss authored
free the allocated pcm platform device in the error path. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-