- 23 Dec, 2009 40 commits
-
-
Cliff Cai authored
Since a DMA transfer may need to be kicked off several times to complete, the DMA start must include the length that has already been transferred. Signed-off-by:
Cliff Cai <cliff.cai@analog.com> Signed-off-by:
Mike Frysinger <vapier@gentoo.org> Cc: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Sergei Shtylyov authored
Gadget stalling a zero-length SETUP request results in this error message: SetupEnd came in a wrong ep0stage idle In order to avoid it, always set the CSR0.DataEnd bit after detecting a zero- length request. Add the missing '\n' to the error message itself as well... Signed-off-by:
Sergei Shtylyov <sshtylyov@ru.mvista.com> Acked-by:
Anand Gadiyar <gadiyar@ti.com> Cc: stable <stable@kernel.org> Signed-off-by:
Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by:
-
Swaminathan S authored
Race condition exists between the cppi_interrupt handler and davinci_interrupt handler w.r.t completing a TX IO. Since DM646x has seperate DMA and USB endpoint interrupts cppi_interrupt handler needs to hold the lock while operating on the endpoint. Update over previous patch to avoid taking the lock if already taken. Tested on DM644x, DM355 and DM646x platforms. Signed-off-by:
Swaminathan S <swami.iyer@ti.com> Acked-by:
-
Felipe Balbi authored
On OTG and gadget-only configurations, we need a gadget driver in order to work properly, so avoid changing operation modes when there's no gadget driver loaded. Signed-off-by:
-
Arnaud Mandy authored
When registering gadget driver, the state of the transceiver must be set from undefined (no gadget) to b_idle. Module unload sets the transceiver state to undefined state. After the first load/unload pair, the reset irq will be lost. Signed-off-by:
Arnaud Mandy <ext-arnaud.2.mandy@nokia.com> Signed-off-by:
-
Swaminathan S authored
This fixes a null-pointer dereference bug. Signed-off-by:
-
Felipe Balbi authored
The tree is now on a new address. Signed-off-by:
-
Cliff Cai authored
Current musb gadget dma code produces the warning: drivers/usb/musb/musb_gadget.c: In function 'txstate': drivers/usb/musb/musb_gadget.c:312: warning: comparison of distinct pointer types lacks a cast So switch to min_t(size_t, ...). Signed-off-by: -
Felipe Balbi authored
probe() already was on __init, so moving remove() to __exit. Signed-off-by:
-
Sergei Shtylyov authored
Commit 7723de7e (USB: musb_gadget: remove pointless loop) included uncalled for (and incorrect) optimization that might cause a kernel oops in txstate() -- undo it. Signed-off-by:
-
Andreas Mohr authored
This is a (almost) sort-only patch to sort FTDI device product ID definitions in new ftdi_sio_ids.h header. Advantage is that new device ID submissions will now have a specific (sorted) position - less future merge conflicts. Compile-tested, based on _current_ mainline git. Minor checkpatch.pl warnings were eliminated whereever it made sense, very minor text changes. Signed-off-by:
Andreas Mohr <andi@lisas.de> Signed-off-by:
-
Andreas Mohr authored
This is a strictly move-only patch to relocate all FTDI device product ID definitions to their own ftdi_sio_ids.h header (following the usual *_ids.h kernel tree convention, too), thus correcting the slightly too messy appearance (crucial driver defines were stuck somewhere in the decaying middle swamp of the huge existing header). Compile-tested, based on latest mainline git. Signed-off-by:
-
Randy Dunlap authored
Fix new kernel-doc warnings in usb core: Warning(drivers/usb/core/usb.c:79): No description found for parameter 'config' Warning(drivers/usb/core/usb.c:79): No description found for parameter 'iface_num' Warning(drivers/usb/core/usb.c:79): No description found for parameter 'alt_num' Warning(drivers/usb/core/hcd.c:1622): No description found for parameter 'udev' Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
pancho horrillo authored
Hi! $ lsusb -v Bus 001 Device 008: ID 05ac:921c Apple, Inc. Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x05ac Apple, Inc. idProduct 0x921c bcdDevice 1.15 iManufacturer 1 iProduct 2 iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 34 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 2mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 0 No Subclass bInterfaceProtocol 0 None iInterface 0 HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 1.11 bCountryCode 0 Not supported bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 92 Report Descriptors: ** UNAVAILABLE ** Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 16 Signed-off-by:pancho horrillo <pancho@pancho.name> Signed-off-by:
-
Jan Beulich authored
Commit 91777826 removed __init from ehci_wait_for_port(), but left it in place on ehci_reset_port(), which is being called from the former function. Signed-off-by:
Jan Beulich <jbeulich@novell.com> Acked-by:
Jason Wessel <jason.wessel@windriver.com> Signed-off-by:
-
Clemens Ladisch authored
While converting emi62 to use request_firmware(), the driver was also changed to use the ihex helper functions. However, this broke the loading of the FPGA firmware because the code tries to access the addr field of the EOF record which works with a plain array that has an empty last record but not with the ihex helper functions where the end of the data is signaled with a NULL record pointer, resulting in: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<f80d248c>] emi62_load_firmware+0x33c/0x740 [emi62] This can be fixed by changing the loop condition to test the return value of ihex_next_binrec() directly (like in emi26.c). Signed-off-by:
Clemens Ladisch <clemens@ladisch.de> Reported-and-tested-by:
Der Mickster <retroeffective@gmail.com> Acked-by:
David Woodhouse <David.Woodhouse@intel.com> Cc: stable <stable@kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Blaise Gassend authored
Signed-off-by:
Blaise Gassend <blaise.gasend_linux@m4x.org> Signed-off-by:
-
Bill Gatliff authored
This patch corrects a problem where drivers/usb/otg is linked twice if CONFIG_USB_ULPI is selected, resulting in a build error (symbol conflict). The files in that directory are properly linked already as part of CONFIG_USB, and need not be indicated specifically for CONFIG_USB_ULPI. Signed-off-by:
Bill Gatliff <bgat@billgatliff.com> Acked-by:
-
Julia Lawall authored
Use ERR_PTR and IS_ERR rather than mixing integers and pointers. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression *E; @@ * E < 0 // </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> Acked-by:
David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
-
Alan Stern authored
This patch (as1315) fixes some bugs in the USB core authorization code: usb_deauthorize_device() should deallocate the device strings instead of leaking them, and it should invoke usb_destroy_configuration() (which does proper reference counting) instead of freeing the config information directly. usb_authorize_device() shouldn't change the device strings until it knows that the authorization will succeed, and it should autosuspend the device at the end (having autoresumed the device at the start). Because the device strings can be changed, the sysfs routines to display the strings must protect the string pointers by locking the device. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> CC: Inaky Perez-Gonzalez <inaky@linux.intel.com> Acked-by:
David Vrabel <david.vrabel@csr.com> Cc: stable <stable@kernel.org> Signed-off-by:
-
Alan Stern authored
This patch (as1314) renames usb_configure_device() and usb_configure_device_otg() in the hub driver. Neither name is appropriate because these routines enumerate devices, they don't configure them. That's handled by usb_choose_configuration() and usb_set_configuration(). Signed-off-by:
-
Alan Stern authored
This patch (as1313) updates the documentation concerning USB power management. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6Linus Torvalds authored
* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (35 commits) drm/radeon/kms: add definitions for v4 power tables drm/radeon/kms: never combine LVDS with another encoder drm/radeon/kms: Check module arguments to be valid V2 drm/radeon/kms: Avoid crash when trying to cleanup uninitialized structure drm/radeon/kms: add cvt mode if we only have lvds w/h and no edid (v4) drm/radeon/kms: add 3DC compression support drm/radeon/kms: allow rendering while no colorbuffer is set on r300 drm/radeon/kms: enable memory clock reading on legacy (V2) drm/radeon/kms: prevent parallel AtomBIOS calls drm/radeon/kms: set proper default tv standard drm/radeon/kms: fix legacy rmx drm/radeon/kms/atom: fill in proper defines for digital setup drm/kms: silencing a false positive warning. drm/mm: fix logic for selection of best fit block drm/vmwgfx: Use TTM handles instead of SIDs as user-space surface handles. drm/vmwgfx: Return -ERESTARTSYS when interrupted by a signal. drm/vmwgfx: Fix unlocked ioctl and add proper access control drm/radeon: fix build on 64-bit with some compilers. drivers/gpu: Use kzalloc for allocating only one thing DRM: Rename clamp variable ...
-
Stefani Seibold authored
The USB serial code was a new user of the kfifo API, and it was missed when porting things to the new kfifo API. Please make the write_fifo in place. Here is my patch to fix the regression and full ported version. Signed-off-by:
Stefani Seibold <stefani@seibold.net> Reported-and-tested-by:
Rafael J. Wysocki <rjw@sisk.pl> Cc: Greg KH <greg@kroah.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Dave Airlie authored
* korg/drm-radeon-next: drm/radeon/kms: add definitions for v4 power tables drm/radeon/kms: never combine LVDS with another encoder drm/radeon/kms: Check module arguments to be valid V2 drm/radeon/kms: Avoid crash when trying to cleanup uninitialized structure drm/radeon/kms: add cvt mode if we only have lvds w/h and no edid (v4) drm/radeon/kms: add 3DC compression support drm/radeon/kms: allow rendering while no colorbuffer is set on r300 drm/radeon/kms: enable memory clock reading on legacy (V2) drm/radeon/kms: prevent parallel AtomBIOS calls drm/radeon/kms: set proper default tv standard drm/radeon/kms: fix legacy rmx drm/radeon/kms/atom: fill in proper defines for digital setup
-
Alex Deucher authored
[airlied: just adding this for completeness to avoid drift between public atombios.h files] Signed-off-by:
Alex Deucher <alexdeucher@gmail.com> Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
Alex Deucher authored
When linking multiple encoders to a connector, make sure to not link LVDS with another connector. Some bioses have the same i2c line for LVDS and VGA. Signed-off-by:
-
Jerome Glisse authored
This patch add a function which check module argument to be valid. On invalid argument it prints a warning and setback the default value. V2: Allow 0 for vram limit & agp mode which are the default value Signed-off-by:
Jerome Glisse <jglisse@redhat.com> Signed-off-by:
-
Jerome Glisse authored
Add boolean to record if some part of the driver are initialized or not this allow to avoid a crash when trying to cleanup uninitialized structure members. Signed-off-by:
-
Alex Deucher authored
This fixes LVDS on some mac laptops without a panel edid. v2 - Set proper mode type flags v3 - Note that this is not neceesarily the exact panel mode, but an approximation based on the cvt formula. For these systems we should ideally read the mode info out of the registers or add a mode table, but this works and is much simpler. v4 - Update comments and debug message. Signed-off-by:
-
Marek Olšák authored
There are 2 formats: ATI1N: 64 bits per 4x4 block, one-channel format ATI2N: 128 bits per 4x4 block, two-channel format Signed-off-by: -
Marek Olšák authored
Because hardware cannot disable all colorbuffers directly to do depth-only rendering, a user should: - disable reading from a colorbuffer in blending - disable fastfill - set the color channel mask to 0 to prevent writing to a colorbuffer Signed-off-by: -
Rafał Miłecki authored
V2: detect IGP cards (which don't have own memory) Signed-off-by:
Rafał Miłecki <zajec5@gmail.com> Acked-by:
-
Rafał Miłecki authored
This just adds a mutex around the atombios table execution so we don't call it from two contexts at once. Signed-off-by:
-
Alex Deucher authored
we were just using 1 before. reported on irc by soreau Signed-off-by:
-
Alex Deucher authored
This makes 640x480 on my R100 work again, both in aspect and centered mode. Signed-off-by:
-
Alex Deucher authored
Signed-off-by:
-
Dave Airlie authored
* nouveau/for-airlied: drm/nouveau: fix bug causing pinned buffers to lose their NO_EVICT flag drm/nv50: fix suspend/resume delays without firmware present drm/nouveau: prevent all channel creation if accel not available drm/nv50: fix two potential suspend/resume oopses drm/nv40: implement ctxprog/state generation drm/nv10: Add the initial graph context and soft methods needed for LMA. drm/nouveau: Fix up buffer eviction, and evict them to GART, if possible. drm/nouveau: Add proper error handling to nouveau_card_init drm/nv04: Fix NV04 set_operation software method. drm/nouveau: Kill global state in BIOS script interpreter drm/nouveau: Kill global state in NvShadowBIOS drm/nouveau: use drm debug levels drm/i2c/ch7006: Fix load detection false positives right after system init. drm/nv04-nv40: Fix "conflicting memory types" when saving/restoring VGA fonts.
-
Marin Mitov authored
warning: 'width' may be used uninitialized in this function drivers/gpu/drm/drm_edid.c Signed-off-by:
Marin Mitov <mitov@issp.bas.bg> Signed-off-by:
-
Bob Gleitsmann authored
This is from bug 25728. [airlied: I'm just forwarding the patch for review, Thomas, ickle?] Acked-by:
Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by:
-
