Signed-off-by: Harald Welte <laforge@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

break is not enough to escape from the walking loops, since
multiple encapsulated loops are used to traverse the hash tables.
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Adds a new function fw_change_attr using the new generic routines which
can be used to change attribute but also to initially set them to avoid
duplicated code.
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Cleans up fw_classify by using the generic routines and
adds a additional but unneeded continue to document that
an action may overrule the filter's match result.
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Adds generic routines used by classifier to:
 - bind/unbind to classes
 - configure action/police/indev
 - dump action/police
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

into nuts.davemloft.net:/disk1/BK/net-2.6

Add light-weight-syscall support to parisc. The first LWS is atomic CAS.
Committed-by: Carlos O'Donell <carlos@parisc-linux.org>

Add user_space macro, to determine if we are in a user
versus kernel space.
Committed-by: Carlos O'Donell <carlos@parisc-linux.org>

Calling sys_restart_syscall without having taking a signal
across a syscall leaves the restart_block uninitialized,
allowing malicious user code to crash the kernel.

FIX:

Define INIT_THREAD_INFO such that restart_block.fn is set to
the default do_not_restart_syscall.
Committed-by: Carlos O'Donell <carlos@parisc-linux.org>

Enable SMP on A500 by default
Committed-by: Paul Bame <bame@parisc-linux.org>

Fix N class SMP

The main fixes are:

 - memory barriers to our space and control register moves
 - fix for the N class merced bus problem which can't have more than
   one PxTLB broadcast outstanding at once
 - make smp_call_function() wait until the function completes

This now boots and runs on a 32MB N4000 in Fort Collins with 2 cpus
and discontig mem support.
Committed-by: James Bottomley <jejb@parisc-linux.org>
Committed-by: Randolph Chung <tausq@parisc-linux.org>

Add a make install target
Committed-by: Matthew Wilcox <willy@parisc-linux.org>

PA-RISC does have spinlock debugging and doesn't have the frame pointer
option.  USERMODE had been added twice to spinlock debugging, so remove that.
Committed-by: Randolph Chung <tausq@parisc-linux.org>
Committed-by: Matthew Wilcox <willy@parisc-linux.org>

add some more BL macros and b,l in appropriate places in entry.S to
expand the range of our jumps and work around the 64 bit binutils problem
where it will allow the jump ranges to go beyond their permitted limits
without complaining.
Committed-by: James Bottomley <jejb@parisc-linux.org>

add HP copyright
Committed-by: Grant Grundler <grundler@parisc-linux.org>

small debug cleanup
Committed-by: Randolph Chung <tausq@parisc-linux.org>

Merge head64.S and head.S
Cleanup 64-bit sp manipulations
Committed-by: Kyle McMartin <kyle@parisc-linux.org>
Committed-by: Randolph Chung <tausq@parisc-linux.org>

into ppc970.osdl.org:/home/torvalds/v2.6/linux

CONFIG_IDEDMA_PCI_AUTO and CONFIG_IDEDMA_ICS_AUTO

Host drivers should deal with broken hardware themselves.
Warn if DMA support is enabled but "enable DMA by default" is not.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

"hdx=autotune", "hdx=noautotune":
* should be handled by host drivers needing them

"idex=autotune", "idex=noautotune":
* should die

"idex=ata66":
* should be handled by host drivers needing it

"idex=dma":
* works only for: cs5220.c, generic.c, hpt366.c, triflex.c
* DMA should be used by default

"idex=reset", "idex=serialize":
* host drivers should set these settings when needed

"idex=base[,ctl[,irq]]":
* host drivers should auto-detect correct settings
* ordering should be controlled by user-space

"ide0=four":
* should be handled by ide-generic driver
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Majority of these settings is also available through ioctls.
We will deal with the rest during deprecation period.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

From: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Without this patch my HP CD-Writer doesn't work.
With this applied everything is fine.
Signed-off-by: Tero Roponen <teanropo@cc.jyu.fi>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

into ppc970.osdl.org:/home/torvalds/v2.6/linux

Need to include linux/in6.h in m68knommu checksum.h to get
a clean compile. All other architectures to this too.
Signed-off-by: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Add build support for new CPU families and boards. Specifically for
the 527x ColdFire family, and the generic 528x CPU family.
Also made the switch to -O1, gives smaller code on m68k and ColdFire
platforms.
Signed-off-by: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Completely rework m68knommu do_signal() signal handling code.
Changed to use get_signal_to_deliver() properly, and remove
un-neccessary local signal type checks.
Signed-off-by: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Add clock rate definitions for newly support ColdFire 527x family
of CPU's. And switch to the generic 528x define for the 5280 and
5282 CPU's.
Signed-off-by: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Re-work the udelay() function. On fast ColdFire CPU's we are
overflowing in the calculation and getting totally bogus
results.

On old 68k and ColdFire CPU's we have no 32*32->64 multiply
instruction. So we resort to a mul/shift calculation similar
to what ARM uses.
Signed-off-by: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Update the m68knommu system call definitions to match the modified
syscall table. This will bring it into line with other architectures.
Signed-off-by: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

A few updates to the m68knommu configuration:

. Made the Morotola 5280 and 5282 support be a common 528x family
. Add support for selecting the 527x ColdFire family (5270/5271/5274/5275)
. Add support for selecting Freescale M5271EVB board
. Add support for selecting Freescale M5275EVB board
. Add support for selecting Sneha CPU16B board
. Add support for selecting Feith SCALES and CANCAM boards
. Fix some gramatical errors in help lines
Signed-off-by: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Create a real non-inlined function for m68knommu udelay().
We can save a little code space this way (and on most uClinux
patforms this is a problem).
Signed-off-by: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Couple of updates for ther m68knommu linker script.

. Add support for the Freescale M5271EVB and M5275EVB boards
. Add support for the Sneha CPU16B board
. Changes to use the generic 528x define to 5280 and 5282 base boards
. Add the missing param section
. Align the ramfs section on a 4k (pseudo page size) boundary
Signed-off-by: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>