- 12 Jan, 2015 5 commits
-
-
David S. Miller authored
Merge tag 'wireless-drivers-for-davem-2015-01-09' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers * rtlwifi: fix a regression in large skb allocation failure iwlwifi: * fix for 7265D NVM check * fixes for scan: fix long scanning times and network discovery * new firmware API for iwlmvm supported devices * fixes in rate control Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller authored
Pablo Neira Ayuso says: ==================== netfilter/ipvs fixes for net The following patchset contains netfilter/ipvs fixes, they are: 1) Small fix for the FTP helper in IPVS, a diff variable may be left unset when CONFIG_IP_VS_IPV6 is set. Patch from Dan Carpenter. 2) Fix nf_tables port NAT in little endian archs, patch from leroy christophe. 3) Fix race condition between conntrack confirmation and flush from userspace. This is the second reincarnation to resolve this problem. 4) Make sure inner messages in the batch come with the nfnetlink header. 5) Relax strict check from nfnetlink_bind() that may break old userspace applications using all 1s group mask. 6) Schedule removal of chains once no sets and rules refer to them in the new nf_tables ruleset flush command. Reported by Asbjoern Sloth Toennesen. Note that this batch comes later than usual because of the short winter holidays. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Christoph Jaeger authored
Due to a misplaced parenthesis, the expression (unlikely(offset) < 0), which expands to (__builtin_expect(!!(offset), 0) < 0), never evaluates to true. Therefore, when sending packets with PF_PACKET/SOCK_DGRAM, packet_snd() does not abort as intended if the creation of the layer 2 header fails. Spotted by Coverity - CID 1259975 ("Operands don't affect result"). Fixes: 9c707762 ("packet: make packet_snd fail on len smaller than l2 header") Signed-off-by: Christoph Jaeger <cj@linux.com> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Willem de Bruijn <willemb@google.com> Acked-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Commit d75b1ade ("net: less interrupt masking in NAPI") uncovered wrong alx_poll() behavior. A NAPI poll() handler is supposed to return exactly the budget when/if napi_complete() has not been called. It is also supposed to return number of frames that were received, so that netdev_budget can have a meaning. Also, in case of TX pressure, we still have to dequeue received packets : alx_clean_rx_irq() has to be called even if alx_clean_tx_irq(alx) returns false, otherwise device is half duplex. Signed-off-by: Eric Dumazet <edumazet@google.com> Fixes: d75b1ade ("net: less interrupt masking in NAPI") Reported-by: Oded Gabbay <oded.gabbay@amd.com> Bisected-by: Oded Gabbay <oded.gabbay@amd.com> Tested-by: Oded Gabbay <oded.gabbay@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
A NAPI poll() handler is supposed to return exactly the budget when/if napi_complete() has not been called. It is also supposed to return number of frames that were received, so that netdev_budget can have a meaning. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 09 Jan, 2015 4 commits
-
-
Hubert Feurstein authored
This patch initialises the fep->netdev pointer. This pointer was not initialised at all, but is used in fec_enet_timeout_work and in some error paths. Signed-off-by: Hubert Feurstein <h.feurstein@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Nobuhiro Iwamatsu authored
TRSCER register is configured differently by SoCs. TRSCER of R-Car Gen2 is RINT8 bit only valid, other bits are reserved bits. This removes access to TRSCER register reserve bit by adding variable trscer_err_mask to sh_eth_cpu_data structure, set the register information to each SoCs. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Nobuhiro Iwamatsu authored
FDR register of R-Car set in fdr_value can have the original settings. This sets the value that is suitable for each SoCs to fdr_value of R8A777x and R8A779x. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/netDavid S. Miller authored
Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2015-01-06 This series contains fixes to i40e only. Jesse provides a fix for when the driver was polling with interrupts disabled the hardware would occasionally not write back descriptors. His fix causes the driver to detect this situation and force an interrupt to fire which will flush the stuck descriptor. Anjali provides a couple of fixes, the first corrects an issue where the receive port checksum error counter was incrementing incorrectly with UDP encapsulated tunneled traffic. The second fix resolves an issue where the driver was examining the outer protocol layer to set the inner protocol layer checksum offload. In the case of TCP over IPv6 over an IPv4 based VXLAN, the inner checksum offloads would be set to look for IPv4/UDP instead of IPv6/TCP, so fixed the issue so that the driver will look at the proper layer for encapsulation offload settings. v2: fixed a bug in patch 01 of the series, where the interrupt rate impacted 4 port workloads by reducing throughput. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 07 Jan, 2015 5 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: "Just a pile of random fixes, including: 1) Do not apply TSO limits to non-TSO packets, fix from Herbert Xu. 2) MDI{,X} eeprom check in e100 driver is reversed, from John W. Linville. 3) Missing error return assignments in several ethernet drivers, from Julia Lawall. 4) Altera TSE device doesn't come back up after ifconfig down/up sequence, fix from Kostya Belezko. 5) Add more cases to the check for whether the qmi_wwan device has a bogus MAC address and needs to be assigned a random one. From Kristian Evensen. 6) Fix interrupt hangs in CPSW, from Felipe Balbi. 7) Implement ndo_features_check in r8152 so that the stack doesn't feed GSO packets which are outside of the chip's capabilities. From Hayes Wang" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (26 commits) qla3xxx: don't allow never end busy loop xen-netback: fixing the propagation of the transmit shaper timeout r8152: support ndo_features_check batman-adv: fix potential TT client + orig-node memory leak batman-adv: fix multicast counter when purging originators batman-adv: fix counter for multicast supporting nodes batman-adv: fix lock class for decoding hash in network-coding.c batman-adv: fix delayed foreign originator recognition batman-adv: fix and simplify condition when bonding should be used Revert "mac80211: Fix accounting of the tailroom-needed counter" net: ethernet: cpsw: fix hangs with interrupts enic: free all rq buffs when allocation fails qmi_wwan: Set random MAC on devices with buggy fw openvswitch: Consistently include VLAN header in flow and port stats. tcp: Do not apply TSO segment limit to non-TSO packets Altera TSE: Add missing phydev net/mlx4_core: Fix error flow in mlx4_init_hca() net/mlx4_core: Correcly update the mtt's offset in the MR re-reg flow qlcnic: Fix return value in qlcnic_probe() net: axienet: fix error return code ...
-
git://git.code.sf.net/p/openipmi/linux-ipmiLinus Torvalds authored
Pull IPMI fixlet from Corey Minyard: "Fix a compile warning" * tag 'for-linus-3' of git://git.code.sf.net/p/openipmi/linux-ipmi: ipmi: Fix compile warning with tv_usec
-
Anjali Singhai authored
The driver was examining the outer protocol layer to set the inner protocol layer checksum offload. In the case of TCP over IPV6 over an IPv4 based VXLAN the inner checksum offloads would be set to look for IPv4/UDP instead of IPv6/TCP. This code fixes that so that the driver will look at the proper layer for encapsulation offload settings. Signed-off-by: Anjali Singhai <anjali.singhai@intel.com> Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Anjali Singhai authored
The Rx port checksum error counter was incrementing incorrectly with UDP encapsulated tunneled traffic. This patch fixes the problem so that the port_rx_csum counter will show accurate statistics. Signed-off-by: Anjali Singhai <anjali.singhai@intel.com> Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Jesse Brandeburg authored
When the driver was polling with interrupts disabled the hardware will occasionally not write back descriptors. This patch causes the driver to detect this situation and force an interrupt to fire which will flush the stuck descriptor. Does not conflict with napi because if we are already polling the napi_schedule is ignored. Additionally the extra interrupts are rate limited, so don't cause a burden to the CPU. Change-ID: Iba4616d2a71288672a5f08e4512e2704b97335e8 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 06 Jan, 2015 18 commits
-
-
Andy Shevchenko authored
The counter variable wasn't increased at all which may stuck under certain circumstances. Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
Pull ext4 bugfixes from Ted Ts'o: "Revert a potential seek_data/hole regression which shows up when using ext4 to handle ext3 file systems, plus two minor bug fixes" * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: remove spurious KERN_INFO from ext4_warning call Revert "ext4: fix suboptimal seek_{data,hole} extents traversial" ext4: prevent online resize with backup superblock
-
Pablo Neira Ayuso authored
Jumping between chains doesn't mix well with flush ruleset. Rules from a different chain and set elements may still refer to us. [ 353.373791] ------------[ cut here ]------------ [ 353.373845] kernel BUG at net/netfilter/nf_tables_api.c:1159! [ 353.373896] invalid opcode: 0000 [#1] SMP [ 353.373942] Modules linked in: intel_powerclamp uas iwldvm iwlwifi [ 353.374017] CPU: 0 PID: 6445 Comm: 31c3.nft Not tainted 3.18.0 #98 [ 353.374069] Hardware name: LENOVO 5129CTO/5129CTO, BIOS 6QET47WW (1.17 ) 07/14/2010 [...] [ 353.375018] Call Trace: [ 353.375046] [<ffffffff81964c31>] ? nf_tables_commit+0x381/0x540 [ 353.375101] [<ffffffff81949118>] nfnetlink_rcv+0x3d8/0x4b0 [ 353.375150] [<ffffffff81943fc5>] netlink_unicast+0x105/0x1a0 [ 353.375200] [<ffffffff8194438e>] netlink_sendmsg+0x32e/0x790 [ 353.375253] [<ffffffff818f398e>] sock_sendmsg+0x8e/0xc0 [ 353.375300] [<ffffffff818f36b9>] ? move_addr_to_kernel.part.20+0x19/0x70 [ 353.375357] [<ffffffff818f44f9>] ? move_addr_to_kernel+0x19/0x30 [ 353.375410] [<ffffffff819016d2>] ? verify_iovec+0x42/0xd0 [ 353.375459] [<ffffffff818f3e10>] ___sys_sendmsg+0x3f0/0x400 [ 353.375510] [<ffffffff810615fa>] ? native_sched_clock+0x2a/0x90 [ 353.375563] [<ffffffff81176697>] ? acct_account_cputime+0x17/0x20 [ 353.375616] [<ffffffff8110dc78>] ? account_user_time+0x88/0xa0 [ 353.375667] [<ffffffff818f4bbd>] __sys_sendmsg+0x3d/0x80 [ 353.375719] [<ffffffff81b184f4>] ? int_check_syscall_exit_work+0x34/0x3d [ 353.375776] [<ffffffff818f4c0d>] SyS_sendmsg+0xd/0x20 [ 353.375823] [<ffffffff81b1826d>] system_call_fastpath+0x16/0x1b Release objects in this order: rules -> sets -> chains -> tables, to make sure no references to chains are held anymore. Reported-by: Asbjoern Sloth Toennesen <asbjorn@asbjorn.biz> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Pablo Neira Ayuso authored
Relax the checking that was introduced in 97840cb6 ("netfilter: nfnetlink: fix insufficient validation in nfnetlink_bind") when the subscription bitmask is used. Existing userspace code code may request to listen to all of the existing netlink groups by setting an all to one subscription group bitmask. Netlink already validates subscription via setsockopt() for us. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Pablo Neira Ayuso authored
Make sure there is enough room for the nfnetlink header in the netlink messages that are part of the batch. There is a similar check in netlink_rcv_skb(). Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Pablo Neira Ayuso authored
Commit 5195c14c ("netfilter: conntrack: fix race in __nf_conntrack_confirm against get_next_corpse") aimed to resolve the race condition between the confirmation (packet path) and the flush command (from control plane). However, it introduced a crash when several packets race to add a new conntrack, which seems easier to reproduce when nf_queue is in place. Fix this race, in __nf_conntrack_confirm(), by removing the CT from unconfirmed list before checking the DYING bit. In case race occured, re-add the CT to the dying list This patch also changes the verdict from NF_ACCEPT to NF_DROP when we lose race. Basically, the confirmation happens for the first packet that we see in a flow. If you just invoked conntrack -F once (which should be the common case), then this is likely to be the first packet of the flow (unless you already called flush anytime soon in the past). This should be hard to trigger, but better drop this packet, otherwise we leave things in inconsistent state since the destination will likely reply to this packet, but it will find no conntrack, unless the origin retransmits. The change of the verdict has been discussed in: https://www.marc.info/?l=linux-netdev&m=141588039530056&w=2Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Linus Torvalds authored
Jay Foad reports that the address sanitizer test (asan) sometimes gets confused by a stack pointer that ends up being outside the stack vma that is reported by /proc/maps. This happens due to an interaction between RLIMIT_STACK and the guard page: when we do the guard page check, we ignore the potential error from the stack expansion, which effectively results in a missing guard page, since the expected stack expansion won't have been done. And since /proc/maps explicitly ignores the guard page (commit d7824370: "mm: fix up some user-visible effects of the stack guard page"), the stack pointer ends up being outside the reported stack area. This is the minimal patch: it just propagates the error. It also effectively makes the guard page part of the stack limit, which in turn measn that the actual real stack is one page less than the stack limit. Let's see if anybody notices. We could teach acct_stack_growth() to allow an extra page for a grow-up/grow-down stack in the rlimit test, but I don't want to add more complexity if it isn't needed. Reported-and-tested-by: Jay Foad <jay.foad@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.open-mesh.org/linux-mergeDavid S. Miller authored
Included changes: - ensure bonding is used (if enabled) for packets coming in the soft interface - fix race condition to avoid orig_nodes to be deleted right after being added - avoid false positive lockdep splats by assigning lockclass to the proper hashtable lock objects - avoid miscounting of multicast 'disabled' nodes in the network - fix memory leak in the Global Translation Table in case of originator interval change Signed-off-by: David S. Miller <davem@davemloft.net>
-
Palik, Imre authored
Since e9ce7cb6 ("xen-netback: Factor queue-specific data into queue struct"), the transimt shaper timeout is always set to 0. The value the user sets via xenbus is never propagated to the transmit shaper. This patch fixes the issue. Cc: Anthony Liguori <aliguori@amazon.com> Signed-off-by: Imre Palik <imrep@amazon.de> Acked-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Merge tag 'mac80211-for-davem-2015-01-06' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Here's just a single fix - a revert of a patch that broke the p54 and cw2100 drivers (arguably due to bad assumptions there.) Since this affects kernels since 3.17, I decided to revert for now and we'll revisit this optimisation properly for -next. Signed-off-by: David S. Miller <davem@davemloft.net>
-
hayeswang authored
Support ndo_features_check to avoid: - the transport offset is more than the hw limitation when using hw checksum. - the skb->len of a GSO packet is more than the limitation. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Linus Lüssing authored
This patch fixes a potential memory leak which can occur once an originator times out. On timeout the according global translation table entry might not get purged correctly. Furthermore, the non purged TT entry will cause its orig-node to leak, too. Which additionally can lead to the new multicast optimization feature not kicking in because of a therefore bogus counter. In detail: The batadv_tt_global_entry->orig_list holds the reference to the orig-node. Usually this reference is released after BATADV_PURGE_TIMEOUT through: _batadv_purge_orig()-> batadv_purge_orig_node()->batadv_update_route()->_batadv_update_route()-> batadv_tt_global_del_orig() which purges this global tt entry and releases the reference to the orig-node. However, if between two batadv_purge_orig_node() calls the orig-node timeout grew to 2*BATADV_PURGE_TIMEOUT then this call path isn't reached. Instead the according orig-node is removed from the originator hash in _batadv_purge_orig(), the batadv_update_route() part is skipped and won't be reached anymore. Fixing the issue by moving batadv_tt_global_del_orig() out of the rcu callback. Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Acked-by: Antonio Quartulli <antonio@meshcoding.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
-
Linus Lüssing authored
When purging an orig_node we should only decrease counter tracking the number of nodes without multicast optimizations support if it was increased through this orig_node before. A not yet quite initialized orig_node (meaning it did not have its turn in the mcast-tvlv handler so far) which gets purged would not adhere to this and will lead to a counter imbalance. Fixing this by adding a check whether the orig_node is mcast-initalized before decreasing the counter in the mcast-orig_node-purging routine. Introduced by 60432d75 ("batman-adv: Announce new capability via multicast TVLV") Reported-by: Tobias Hachmer <tobias@hachmer.de> Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
-
Linus Lüssing authored
A miscounting of nodes having multicast optimizations enabled can lead to multicast packet loss in the following scenario: If the first OGM a node receives from another one has no multicast optimizations support (no multicast tvlv) then we are missing to increase the counter. This potentially leads to the wrong assumption that we could safely use multicast optimizations. Fixings this by increasing the counter if the initial OGM has the multicast TVLV unset, too. Introduced by 60432d75 ("batman-adv: Announce new capability via multicast TVLV") Reported-by: Tobias Hachmer <tobias@hachmer.de> Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
-
Martin Hundebøll authored
batadv_has_set_lock_class() is called with the wrong hash table as first argument (probably due to a copy-paste error), which leads to false positives when running with lockdep. Introduced-by: 612d2b4f ("batman-adv: network coding - save overheard and tx packets for decoding") Signed-off-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
-
Linus Lüssing authored
Currently it can happen that the reception of an OGM from a new originator is not being accepted. More precisely it can happen that an originator struct gets allocated and initialized (batadv_orig_node_new()), even the TQ gets calculated and set correctly (batadv_iv_ogm_calc_tq()) but still the periodic orig_node purging thread will decide to delete it if it has a chance to jump between these two function calls. This is because batadv_orig_node_new() initializes the last_seen value to zero and its caller (batadv_iv_ogm_orig_get()) makes it visible to other threads by adding it to the hash table already. batadv_iv_ogm_calc_tq() will set the last_seen variable to the correct, current time a few lines later but if the purging thread jumps in between that it will think that the orig_node timed out and will wrongly schedule it for deletion already. If the purging interval is the same as the originator interval (which is the default: 1 second), then this game can continue for several rounds until the random OGM jitter added enough difference between these two (in tests, two to about four rounds seemed common). Fixing this by initializing the last_seen variable of an orig_node to the current time before adding it to the hash table. Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
-
Simon Wunderlich authored
The current condition actually does NOT consider bonding when the interface the packet came in from is the soft interface, which is the opposite of what it should do (and the comment describes). Fix that and slightly simplify the condition. Reported-by: Ray Gibson <booray@gmail.com> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
-
Linus Torvalds authored
-
- 05 Jan, 2015 8 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: - Wire up sys_execveat(). Tested on 32 & 64 bit. - Fix for kdump on LE systems with cpus hot unplugged. - Revert Anton's fix for "kernel BUG at kernel/smpboot.c:134!", this broke other platforms, we'll do a proper fix for 3.20. * tag 'powerpc-3.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: Revert "powerpc: Secondary CPUs must set cpu_callin_map after setting active and online" powerpc/kdump: Ignore failure in enabling big endian exception during crash powerpc: Wire up sys_execveat() syscall
-
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linuxLinus Torvalds authored
Pull ia64 fixlet from Tony Luck: "Add execveat syscall" * tag 'please-pull-syscall' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux: [IA64] Enable execveat syscall for ia64
-
Tony Luck authored
See commit 51f39a1f syscalls: implement execveat() system call Signed-off-by: Tony Luck <tony.luck@intel.com>
-
Kalle Valo authored
Merge tag 'iwlwifi-for-kalle-2015-01-05' of https://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes * fix for 7265D NVM check * fixes for scan: fix long scanning times and network discovery * new firmware API for iwlmvm supported devices * fixes in rate control
-
Johannes Berg authored
This reverts commit ca34e3b5. It turns out that the p54 and cw2100 drivers assume that there's tailroom even when they don't say they really need it. However, there's currently no way for them to explicitly say they do need it, so for now revert this. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=90331. Cc: stable@vger.kernel.org Fixes: ca34e3b5 ("mac80211: Fix accounting of the tailroom-needed counter") Reported-by: Christopher Chavez <chrischavez@gmx.us> Bisected-by: Larry Finger <Larry.Finger@lwfinger.net> Debugged-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-
Emmanuel Grumbach authored
This allows 3160 / 7260 / 7265 / 7265D / 8000 devices to use the latest version of the firmware. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
-
David Spinadel authored
Use only basic dwell time (10 ms for active scan and 110 for passive), regardless of the number of the probes and the band, if it is supported by the FW. The FW will add 3 ms for each probe sent and 10 ms for low band channels. Add a TLV flag to indicate such support in FW. This fix is needed to fix few bugs regarding scans that take too much time. Signed-off-by: David Spinadel <david.spinadel@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
-
David Spinadel authored
Add a flag that enables match found notification to align with FW API change. Cc: <stable@vger.kernel.org> [3.17+] Signed-off-by: David Spinadel <david.spinadel@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
-