There are only 6 elements in the cb_pcidda_boards[] array so the
original code read past the end.  After this change nothing uses N_BOARDS
so I removed the definition.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This patch adds some device ids.
The list of supported devices was extracted from realteks driver package.
(0x050d, 0x815F) and (0x0df6, 0x004b) are not in the official list of
supported devices  and may not work correctly.
In case of problems with these, they should probably be removed from the list.
Signed-off-by: Florian Schilhabel <florian.c.schilhabel@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This patch removes some device-ids.
The list of unsupported devices was extracted from realteks driver package.
removed IDs are:
(0x0bda, 0x8192)
(0x0bda, 0x8709)
(0x07aa, 0x0043)
(0x050d, 0x805E)
(0x0df6, 0x0031)
(0x1740, 0x9201)
(0x2001, 0x3301)
(0x5a57, 0x0290)
These devices are _not_ rtl819su based.
Signed-off-by: Florian Schilhabel <florian.c.schilhabel@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

In commit bbfb5652, the spacing in the definitions of eqMacAddr and cpMacAddr
in drivers/staging/rtl8187se/r8180_core.c were changed to conform to kernel
standards. These definitions were duplicates of lines found in
drivers/staging/rtl8187se/ieee80211/dot11d.h. Once the change was made, the
following warnings were emitted:

  CC [M]  drivers/staging/rtl8187se/r8180_core.o
drivers/staging/rtl8187se/r8180_core.c:69:0: warning: "eqMacAddr" redefined
drivers/staging/rtl8187se/ieee80211/dot11d.h:39:0: note: this is the location of the previous definition
drivers/staging/rtl8187se/r8180_core.c:70:0: warning: "cpMacAddr" redefined
drivers/staging/rtl8187se/ieee80211/dot11d.h:40:0: note: this is the location of the previous definition

The fix is to keep only the difinition in the header file.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

I got a wlags49_h2 driver build error in linux-next when CONFIG_SYSFS is not set.

CC [M]  drivers/staging/wlags49_h2/wl_cs.o
In file included from drivers/staging/wlags49_h2/wl_cs.c:104:
drivers/staging/wlags49_h2/wl_sysfs.h: In function ‘register_wlags_sysfs’:
drivers/staging/wlags49_h2/wl_sysfs.h:5: error: parameter name omitted
drivers/staging/wlags49_h2/wl_sysfs.h: In function ‘unregister_wlags_sysfs’:
drivers/staging/wlags49_h2/wl_sysfs.h:6: error: parameter name omitted
make[1]: *** [drivers/staging/wlags49_h2/wl_cs.o] Error 1
make: *** [_module_drivers/staging/wlags49_h2] Error 2

This is due a wrong function definition (it does not include parameters names).
Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

On ia64, the build fails with incompatible implicit definition of strlen.
This patch adds the <linux/string.h> include to get the real prototype.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Added autoloading based on pci id and dmi strings.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

There is a possible race condition when hv_utils starts to load immediately
after hv_vmbus is loading - null pointer error could happen.
This patch added wait/completion to ensure all channels are ready before
vmbus loading completes. So another module won't have any uninitialized channel.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

I received a report that AI streaming acquisitions do not work properly
for the adl_pci9111 driver when convert_src is TRIG_TIMER and
scan_begin_src is TRIG_FOLLOW (and scan_begin_arg is therefore 0).  This
seems to be down to the incorrect setting of dev_private->scan_delay in
pci9111_ai_do_cmd().  Under the previously stated conditions,
dev_private->scan_delay ends up set to (unsigned int)-1, but it ought to
be set to 0.  The function sets it to 0 initially, and it only makes
sense to change it if both convert_src and scan_begin_src are set to
TRIG_TIMER.

Note: 'scan_delay' is the number of unwanted scans to discard after each
valid scan.  The hardware does not support 'scan' timing as such, just a
regularly paced conversion timer (with automatic channel switching
between conversions).  The driver simulates a scan period that is some
(>1) multiple of the conversion period times the scan length
(chanlist_len samples) by reading chanlist_len samples and discarding
the next scan_delay times chanlist_len samples.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

I moved the kfree() down a couple lines after the dereference.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

In today linux-next I got a compile warning in staging/batman-adv.

This is due a struct bin_attribute read function prototype change and the driver was not updated.

This patch solves the issue
Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

copy_to_user() returns the number of bites remaining but we want to
return a negative error code here.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: Himanshu Chauhan <hschauhan@nulltrace.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

* 'for-linus' of git://neil.brown.name/md:
  md/raid5: don't include 'spare' drives when reshaping to fewer devices.
  md/raid5: add a missing 'continue' in a loop.
  md/raid5: Allow recovered part of partially recovered devices to be in-sync
  md/raid5: More careful check for "has array failed".
  md: Don't update ->recovery_offset when reshaping an array to fewer devices.
  md/raid5: avoid oops when number of devices is reduced then increased.
  md: enable raid4->raid0 takeover
  md: clear layout after ->raid0 takeover
  md: fix raid10 takeover: use new_layout for setup_conf
  md: fix handling of array level takeover that re-arranges devices.
  md: raid10: Fix null pointer dereference in fix_read_error()
  Restore partition detection of newly created md arrays.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
  percpu: fix first chunk match in per_cpu_ptr_to_phys()
  percpu: fix trivial bugs in pcpu_build_alloc_info()

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (52 commits)
  phylib: Add autoload support for the LXT973 phy.
  ISDN: hysdn, fix potential NULL dereference
  vxge: fix memory leak in vxge_alloc_msix() error path
  isdn/gigaset: correct CAPI connection state storage
  isdn/gigaset: encode HLC and BC together
  isdn/gigaset: correct CAPI DATA_B3 Delivery Confirmation
  isdn/gigaset: correct CAPI voice connection encoding
  isdn/gigaset: honor CAPI application's buffer size request
  cpmac: do not leak struct net_device on phy_connect errors
  smc91c92_cs: fix the problem that lan & modem does not work simultaneously
  ipv6: fix NULL reference in proxy neighbor discovery
  Bluetooth: Bring back var 'i' increment
  xfrm: check bundle policy existance before dereferencing it
  sky2: enable rx/tx in sky2_phy_reinit()
  cnic: Disable statistics initialization for eth clients that do not support statistics
  net: add dependency on fw class module to qlcnic and netxen_nic
  snmp: fix SNMP_ADD_STATS()
  hso: remove setting of low_latency flag
  udp: Fix bogus UFO packet generation
  lasi82596: fix netdev_mc_count conversion
  ...

* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6:
  NFSv4: Fix an embarassing typo in encode_attrs()
  NFSv4: Ensure that /proc/self/mountinfo displays the minor version number
  NFSv4.1: Ensure that we initialise the session when following a referral
  SUNRPC: Fix a re-entrancy bug in xs_tcp_read_calldir()
  nfs4 use mandatory attribute file type in nfs4_get_root

* 'sh/for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6:
  clocksource: sh_cmt: Fix up bogus shift value.
  arch/sh/mm: Eliminate a double lock
  sh: Fix up IORESOURCE_PCI_FIXED usage in pcibios_fixup_device_resources().
  sh: remove duplicated #include

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  MAINTAINERS - Add an entry for the input MT protocol
  Input: wacom - fix serial number handling on Cintiq 21UX2
  Input: fixup X86_MRST selects
  Input: sysrq - fix "stuck" SysRq mode
  Input: ad7877 - fix spi word size to 16 bit
  Input: pcf8574_keypad - fix off by one in pcf8574_kp_irq_handler()

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6:
  ext3: update ctime when changing the file's permission by setfacl
  ext2: update ctime when changing the file's permission by setfacl

* 'virtio' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6:
  virtio-pci: disable msi at startup
  virtio: return ENOMEM on out of memory

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
  PCI/PM: Do not use native PCIe PME by default

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: usb/endpoint, fix dangling pointer use
  ALSA: asihpi - Get rid of incorrect "long" types and casts.
  ASoC: DaVinci: Fix McASP hardware FIFO configuration
  ALSA: hda - Fix line-in for mb5 model MacBook (Pro) 5,1 / 5,2
  ALSA: usb-audio: fix UAC2 control value queries
  ALSA: usb-audio: parse UAC2 sample rate ranges correctly
  ALSA: usb-audio: fix control messages for USB_RECIP_INTERFACE
  ALSA: usb-audio: add check for faulty clock in parse_audio_format_rates_v2()
  ALSA: hda - Don't check capture source mixer if no ADC is available

* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  hwmon: (k8temp) Bypass core swapping on single-core processors
  hwmon: (i5k_amb) Fix sysfs attribute for lockdep
  hwmon: (k10temp) Do not blacklist known working CPU models

* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
  watchdog: at32ap700x_wdt: register misc device last in probe() function
  watchdog: [PATCH 3/3] imx2_wdt: fix section mismatch

* git://git.infradead.org/iommu-2.6:
  intel-iommu: Force-disable IOMMU for iGFX on broken Cantiga revisions.
  intel-iommu: Fix double lock in get_domain_for_dev()
  intel-iommu: Fix reference by physical address in intel_iommu_attach_device()

* 'for-linus' of git://gitorious.org/linux-omap-dss2/linux:
  OMAP: OMAPFB: fix rfbi.c compile error
  OMAPFB: LCDC: change update_mode to DISABLED when going suspend

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  MAINTAINERS: change mailing list address for CIFS
  cifs: remove bogus first_time check in NTLMv2 session setup code
  cifs: don't call cifs_new_fileinfo unless cifs_open succeeds
  cifs: don't ignore cifs_posix_open_inode_helper return value
  cifs: clean up arguments to cifs_open_inode_helper
  cifs: pass instantiated filp back after open call
  cifs: move cifs_new_fileinfo call out of cifs_posix_open
  cifs: implement drop_inode superblock op
  cifs: don't attempt busy-file rename unless it's in same directory

* 'merge' of git://git.secretlab.ca/git/linux-2.6:
  powerpc/5200: fix lite5200 ethernet phy address
  powerpc/5200: Fix build error in sound code.
  powerpc/5200: fix oops during going to standby
  powerpc/5200: add lite5200 onboard I2C eeprom and flash
  maintainers: Add git trees for SPI and device tree
  of: Drop properties with "/" in their name

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha-2.6:
  alpha: Fix de2104x driver failing to readout MAC address correctly
  alpha: Detect Super IO chip, no IDE on Avanti, enable EPP19
  alpha: fix pci_mmap_resource API breakage
  alpha: fix __arch_hweight32 typo

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc: Fix mpic_resume on early G5 macs
  powerpc: rtas_flash needs to use rtas_data_buf
  powerpc: Unconditionally enabled irq stacks
  powerpc/kexec: Wait for online/possible CPUs only.
  powerpc: Disable CONFIG_SYSFS_DEPRECATED
  powerpc/boot: Remove addRamdisk.c since it is now unused
  powerpc: Move kdump default base address to 64MB on 64bit
  powerpc: Remove dead CONFIG_HIGHPTE
  powerpc/fsl-booke: Move loadcam_entry back to asm code to fix SMP ftrace
  powerpc/fsl-booke: Fix InstructionTLBError execute permission check

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6:
  TPM: ReadPubEK output struct fix

* 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6:
  kbuild: fix LOCALVERSION handling to match description
  kbuild: Fix modpost segfault

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
  ACPI / PM: Do not enable GPEs for system wakeup in advance
  ACPICA: Truncate I/O addresses to 16 bits for Windows compatibility
  ACPICA: Limit maximum time for Sleep() operator
  ACPICA: Fix namestring associated with AE_NO_HANDLER exception
  ACPI / ACPICA: Fix sysfs GPE interface
  ACPI / ACPICA: Fix GPE initialization
  ACPI / ACPICA: Avoid writing full enable masks to GPE registers
  ACPI / ACPICA: Fix low-level GPE manipulation code
  ACPI / ACPICA: Use helper function for computing GPE masks
  ACPI / ACPICA: Do not attempt to disable GPE when installing handler
  ACPI: Disable Vista compatibility for Sony VGN-NS50B_L
  ACPI: fan: fix unbalanced code block
  ACPI: Store NVS state even when entering suspend to RAM
  suspend: Move NVS save/restore code to generic suspend functionality
  ACPI: Do not try to set up acpi processor stuff on cores exceeding maxcpus=
  ACPI: acpi_pad: Don't needlessly mark LAPIC unstable

This is from a Smatch check I'm writing.

strncpy_from_user() returns -EFAULT on error so the first change just
silences a warning but doesn't change how the code works.

The other change is a bug fix because install_thread_keyring_to_cred()
can return a variety of errors such as -EINVAL, -EEXIST, -ENOMEM or
-EKEYREVOKED.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit e13647c1 (phylib: Add support for the LXT973 phy.) added a new ID
but neglected to also add it to the MODULE_DEVICE_TABLE.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Stanse found that lp is dereferenced earlier than checked for being
NULL in hysdn_rx_netpkt. Move the initialization below the test.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Karsten Keil <isdn@linux-pingi.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Stephen Hemminger <shemminger@vyatta.com>
Cc: Patrick McHardy <kaber@trash.net>
Cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>

When pci_enable_msix() returned ret<0, entries and vxge_entries were leaked.
While at it, use the centralized exit idiom in the function.
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Acked-by: Ram Vepa <ram.vepa@exar.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

CAPI applications can handle several connections in parallel,
so one connection state per application isn't sufficient.
Store the connection state in the channel structure instead.

Impact: bugfix
Signed-off-by: Tilman Schmidt <tilman@imap.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>

Adapt to buggy device firmware which accepts setting HLC only in the
same command line as BC, by encoding HLC and BC in a single command
if both are specified, and rejecting HLC without BC.

Impact: bugfix
Signed-off-by: Tilman Schmidt <tilman@imap.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>