- 06 Jul, 2016 1 commit
-
-
Fabio Estevam authored
Commit e2756baa ("pinctrl: imx21: make it explicitly non-modular") missed the removal of the MODULE_DEVICE_TABLE() macro causing the following build error: drivers/pinctrl/freescale/pinctrl-imx21.c:328:1: error: data definition has no type or storage class [-Werror] MODULE_DEVICE_TABLE(of, imx21_pinctrl_of_match); ,so remove the macro to fix this problem. Reported-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Fabio Estevam <festevam@gmail.com> Acked-by:
Linus Walleij <linus.walleij@linaro.org>
-
- 05 Jul, 2016 3 commits
-
-
Alexandre TORGUE authored
Signed-off-by:
Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by:
-
Alexandre TORGUE authored
Signed-off-by:
Maxime Coquelin <mcoquelin.stm32@gmail.com> Signed-off-by:
-
Icenowy Zheng authored
In sun4/5/6/7i, all the pin function related to NAND0 controller is named "nand0". However, in sun8i, some of the functions are named as "nand". This patch renamed them to "nand0", for the consistency. Signed-off-by:
Icenowy Zheng <icenowy@aosc.xyz> Acked-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by:
-
- 04 Jul, 2016 1 commit
-
-
Masahiro Yamada authored
This SoC has no SD card controller. Nor does it have USB port3. These pin-mux settings have no point. Fixes: 70f2f9c4 ("pinctrl: uniphier: add UniPhier PH1-LD11 pinctrl driver") Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
-
- 03 Jul, 2016 1 commit
-
-
Linus Walleij authored
Add support to mux in the second external bus interface as follows: - CS1 and CS2 on GPIO39 and GPIO40 as func 2 - ADDR_7 thru ADDR_0 on GPIO123 thru GPIO130 as func 1 - CS4, CS3 and CS0 on GPIO132, GPIO133, GPIO134 as func 1 - DATA_15 thru DATA_0 on GPIO135 thru GPIO150 as func 1 - OE on GPIO151 as func 1 - ADV on GPIO153 as func 1 - WE on GPIO157 as func 1 This external bus is used on the APQ8060 Dragonboard to connect an external SMSC9211 ethernet adapter, but there are many other usecases for the EBI2. Cc: Stephen Boyd <sboyd@codeaurora.org> Reviewed-by:
Björn Andersson <bjorn.andersson@linaro.org> Signed-off-by:
-
- 29 Jun, 2016 28 commits
-
-
Stephen Boyd authored
The msm8974 pinctrl variant has a couple USB HSIC "glue" registers that let us mux between the pinctrl register settings or the HSIC core settings for the HSIC pins (gpio 144 and gpio 145). Support this method of operation by adding hsic_data and hsic_strobe pins that can select between hsic_ctl and gpio functions. This allows us to toggle the hsic pin configuration over to the HSIC core at runtime. Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by:
Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by:
-
Stephen Boyd authored
The function selection bitfield is not always 3 bits wide. Sometimes it is 4 bits wide. Let's use the npins struct member to determine how many bits wide the function selection bitfield is so we clear the correct amount of bits in the register while remuxing the pins. Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by:
-
Neil Armstrong authored
Signed-off-by:
Neil Armstrong <narmstrong@baylibre.com> Acked-by:
Rob Herring <robh@kernel.org> Acked-by:
-
Neil Armstrong authored
In order to support the Qualcomm MDM9615 SoC, add support for the TLMM using the Qualcomm pinctrl generic driver. Note: the pinctrl is partial, need Documentation to complete all the groups. Signed-off-by:
-
Amitoj Kaur Chawla authored
of_find_node_by_name does an of_node_get on its return value, so an of_node_put is needed on this value before the corresponding variable goes out of scope. The Coccinelle semantic patch used to make this change is as follows: @@ struct device_node *n; struct device_node *n1; statement S; identifier f; expression E; constant C; @@ n = of_find_node_by_name(...) ... if (!n) S ... when != of_node_put(n) when != n1 = f(n,...) when != E = n when any when strict ( + of_node_put(n); return -C; | of_node_put(n); | n1 = f(n,...) | E = n | return ...; ) Signed-off-by:Amitoj Kaur Chawla <amitoj1606@gmail.com> Signed-off-by:
-
Yendapally Reddy Dhananjaya Reddy authored
This adds the initial support of the Broadcom NSP pinmux driver. Signed-off-by:
Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@broadcom.com> Reviewed-by:
Ray Jui <rjui@broadcom.com> Signed-off-by:
-
Yendapally Reddy Dhananjaya Reddy authored
Device tree binding documentation for Broadcom NSP IOMUX driver Signed-off-by:
-
Linus Walleij authored
Merge tag 'sh-pfc-for-v4.8-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel pinctrl: sh-pfc: Updates for v4.8 - Voltage switching support for R-Car H3, - DRIF pin support for R-Car H3, - Cleanups and fixes.
-
Andy Shevchenko authored
This driver adds pinctrl support for Intel Merrifield. The IP block which is called Family-Level Interface Shim is a separate entity in SoC. The GPIO driver (gpio-intel-mid.c) will be updated accordingly to support pinctrl interface. Reviewed-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Paul Gortmaker authored
The Kconfig currently controlling compilation of this code is: drivers/pinctrl/freescale/Kconfig:config PINCTRL_MXS drivers/pinctrl/freescale/Kconfig: bool ...meaning that it currently is not being built as a module by anyone. It also doesn't have any modular functionality, so it doesn't need module.h included at all. What it does have is an exported function that was used as a shared ".remove" by other drivers, but those use cases (imx23 and imx28) are now gone, and hence this can disappear as well. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: linux-gpio@vger.kernel.org Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by:
-
Paul Gortmaker authored
The Kconfig currently controlling compilation of this code is: drivers/pinctrl/freescale/Kconfig:config PINCTRL_IMX28 drivers/pinctrl/freescale/Kconfig: bool ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. We explicitly disallow a driver unbind, since that doesn't have a sensible use case anyway, and it allows us to drop the ".remove" code for non-modular drivers. Since module_init was not in use by this driver, the init ordering remains unchanged with this commit. Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. We also delete the MODULE_LICENSE tag etc. since all that information was (or is now) contained at the top of the file in the comments. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Shawn Guo <shawn.guo@linaro.org> Cc: linux-gpio@vger.kernel.org Signed-off-by:
-
Paul Gortmaker authored
The Kconfig currently controlling compilation of this code is: drivers/pinctrl/freescale/Kconfig:config PINCTRL_IMX23 drivers/pinctrl/freescale/Kconfig: bool ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. We explicitly disallow a driver unbind, since that doesn't have a sensible use case anyway, and it allows us to drop the ".remove" code for non-modular drivers. Since module_init wasn't actually used by this driver, the init ordering remains unchanged with this commit. Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. We also delete the MODULE_LICENSE tag etc. since all that information was (or is now) contained at the top of the file in the comments. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Shawn Guo <shawn.guo@linaro.org> Cc: linux-gpio@vger.kernel.org Signed-off-by:
-
Paul Gortmaker authored
The Kconfig currently controlling compilation of this code is: drivers/pinctrl/freescale/Kconfig:config PINCTRL_VF610 drivers/pinctrl/freescale/Kconfig: bool "Freescale Vybrid VF610 pinctrl driver" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. Since module_init wasn't in use by this driver, the init ordering remains unchanged with this commit. We also delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: linux-gpio@vger.kernel.org Signed-off-by:
-
Paul Gortmaker authored
The Kconfig currently controlling compilation of this code is: drivers/pinctrl/freescale/Kconfig:config PINCTRL_IMX7D drivers/pinctrl/freescale/Kconfig: bool "IMX7D pinctrl driver" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. Since module_init was not in use by this driver, the init ordering remains unchanged with this commit. We also delete the MODULE_LICENSE tag etc. since all that information was (or is now) contained at the top of the file in the comments. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Anson Huang <Anson.Huang@freescale.com> Cc: linux-gpio@vger.kernel.org Signed-off-by:
-
Paul Gortmaker authored
The Kconfig currently controlling compilation of this code is: drivers/pinctrl/freescale/Kconfig:config PINCTRL_IMX6UL drivers/pinctrl/freescale/Kconfig: bool "IMX6UL pinctrl driver" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. Since module_init was not in use by this driver, the init ordering remains unchanged with this commit. We also delete the MODULE_LICENSE tag etc. since all that information was (or is now) contained at the top of the file in the comments. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Anson Huang <Anson.Huang@freescale.com> Cc: linux-gpio@vger.kernel.org Signed-off-by:
-
Paul Gortmaker authored
The Kconfig currently controlling compilation of this code is: drivers/pinctrl/freescale/Kconfig:config PINCTRL_IMX6SX drivers/pinctrl/freescale/Kconfig: bool "IMX6SX pinctrl driver" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. Since module_init was not in use by this driver, the init ordering remains unchanged with this commit. We also delete the MODULE_LICENSE tag etc. since all that information was (or is now) contained at the top of the file in the comments. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Anson Huang <Anson.Huang@freescale.com> Cc: linux-gpio@vger.kernel.org Signed-off-by:
-
Paul Gortmaker authored
The Kconfig currently controlling compilation of this code is: drivers/pinctrl/freescale/Kconfig:config PINCTRL_IMX6SL drivers/pinctrl/freescale/Kconfig: bool "IMX6SL pinctrl driver" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. Since module_init was not in use by this driver, the init ordering remains unchanged with this commit. Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. We also delete the MODULE_LICENSE tag etc. since all that information was (or is now) contained at the top of the file in the comments. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Shawn Guo <shawn.guo@linaro.org> Cc: linux-gpio@vger.kernel.org Signed-off-by:
-
Paul Gortmaker authored
The Kconfig currently controlling compilation of this code is: drivers/pinctrl/freescale/Kconfig:config PINCTRL_IMX6Q drivers/pinctrl/freescale/Kconfig: bool "IMX6Q/DL pinctrl driver" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. Since module_init translates to device_initcall in the non-modular case, the init ordering remains unchanged with this commit. We don't replace module.h with init.h since the file already has that. But we do add export.h since this file uses the global THIS_MODULE. We also delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Dong Aisheng <dong.aisheng@linaro.org> Cc: linux-gpio@vger.kernel.org Signed-off-by:
-
Paul Gortmaker authored
The Kconfig currently controlling compilation of this code is: drivers/pinctrl/freescale/Kconfig:config PINCTRL_IMX6Q drivers/pinctrl/freescale/Kconfig: bool "IMX6Q/DL pinctrl driver" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. Since module_init was not in use by this driver, the init ordering remains unchanged with this commit. We also delete the MODULE_LICENSE tag etc. since all that information was (or is now) contained at the top of the file in the comments. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Shawn Guo <shawn.guo@linaro.org> Cc: linux-gpio@vger.kernel.org Signed-off-by:
-
Paul Gortmaker authored
The Kconfig currently controlling compilation of this code is: drivers/pinctrl/freescale/Kconfig:config PINCTRL_IMX53 drivers/pinctrl/freescale/Kconfig: bool "IMX53 pinctrl driver" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. Since module_init was not in use by this driver, the init ordering remains unchanged with this commit. We also delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Dong Aisheng <dong.aisheng@linaro.org> Cc: linux-gpio@vger.kernel.org Signed-off-by:
-
Paul Gortmaker authored
The Kconfig currently controlling compilation of this code is: drivers/pinctrl/freescale/Kconfig:config PINCTRL_IMX51 drivers/pinctrl/freescale/Kconfig: bool "IMX51 pinctrl driver" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. Since module_init was not in use by this driver, the init ordering remains unchanged with this commit. We also delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Dong Aisheng <dong.aisheng@linaro.org> Cc: linux-gpio@vger.kernel.org Signed-off-by:
-
Paul Gortmaker authored
The Kconfig currently controlling compilation of this code is: drivers/pinctrl/freescale/Kconfig:config PINCTRL_IMX50 drivers/pinctrl/freescale/Kconfig: bool "IMX50 pinctrl driver" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. Since module_init was not in use by this driver, the init ordering remains unchanged with this commit. We also delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: linux-gpio@vger.kernel.org Signed-off-by:
-
Paul Gortmaker authored
The Kconfig currently controlling compilation of this code is: drivers/pinctrl/freescale/Kconfig:config PINCTRL_IMX35 drivers/pinctrl/freescale/Kconfig: bool "IMX35 pinctrl driver" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. Since module_init was not in use by this driver, the init ordering remains unchanged with this commit. We also delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Dong Aisheng <dong.aisheng@linaro.org> Cc: linux-gpio@vger.kernel.org Signed-off-by:
-
Paul Gortmaker authored
The Kconfig currently controlling compilation of this code is: drivers/pinctrl/freescale/Kconfig:config PINCTRL_IMX27 drivers/pinctrl/freescale/Kconfig: bool "IMX27 pinctrl driver" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. Since module_init was not in use by this driver, the init ordering remains unchanged with this commit. We also delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Markus Pargmann <mpa@pengutronix.de> Cc: linux-gpio@vger.kernel.org Signed-off-by:
-
Paul Gortmaker authored
The Kconfig currently controlling compilation of this code is: drivers/pinctrl/freescale/Kconfig:config PINCTRL_IMX25 drivers/pinctrl/freescale/Kconfig: bool "IMX25 pinctrl driver" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. Since module_init was not in use by this driver, the init ordering remains unchanged with this commit. We also delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Denis Carikli <denis@eukrea.com> Cc: linux-gpio@vger.kernel.org Signed-off-by:
-
Paul Gortmaker authored
The Kconfig currently controlling compilation of this code is: drivers/pinctrl/freescale/Kconfig:config PINCTRL_IMX21 drivers/pinctrl/freescale/Kconfig: bool "i.MX21 pinctrl driver" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. Since module_platform_driver() uses the same init level priority as builtin_platform_driver() the init ordering remains unchanged with this commit. We also delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Alexander Shiyan <shc_work@mail.ru> Cc: linux-gpio@vger.kernel.org Signed-off-by:
-
Paul Gortmaker authored
The Kconfig currently controlling compilation of this code is: drivers/pinctrl/freescale/Kconfig:config PINCTRL_IMX1 drivers/pinctrl/freescale/Kconfig: bool "IMX1 pinctrl driver" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. Since module_platform_driver() uses the same init level priority as builtin_platform_driver() the init ordering remains unchanged with this commit. Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. We also delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Alexander Shiyan <shc_work@mail.ru> Cc: linux-gpio@vger.kernel.org Signed-off-by:
-
Paul Gortmaker authored
None of these files have anything modular in them, so they don't need to be bringing in module.h and all its dependencies. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: linux-gpio@vger.kernel.org Signed-off-by:
-
- 23 Jun, 2016 6 commits
-
-
Linus Walleij authored
-
Jon Hunter authored
The pinconf-generic.h file exposes functions for creating generic mappings but it does not expose a function for freeing the mappings. Add a function for freeing generic mappings. Signed-off-by:
Jon Hunter <jonathanh@nvidia.com> Signed-off-by:
-
Ramesh Shanmugasundaram authored
This patch adds DRIF[0-3] pinmux support for r8a7795 SoC. Signed-off-by:
Ramesh Shanmugasundaram <ramesh.shanmugasundaram@bp.renesas.com> Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be>
-
Kuninori Morimoto authored
Now we have PINMUX_SINGLE(). Let's use it instead of PINMUX_IPSR_NOGP() Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by:
-
Andy Shevchenko authored
Documentation incorrectly refers to struct pinctrl_desc, where no such flag is available. Replace the name of the struct. Fixes: commit 8c4c2016 ("pinctrl: move strict option to pinmux_ops") Signed-off-by:
-
Ben Dooks authored
The rockchip_irq_gc_mask_set_bit() function is not exported our used outside of ppinctrl-rockchip.c so fix the following sparse error by making it static: drivers/pinctrl/pinctrl-rockchip.c:2010:6: warning: symbol 'rockchip_irq_gc_mask_set_bit' was not declared. Should it be static? Signed-off-by:
Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by:
-
