- 13 Feb, 2020 6 commits
-
-
Can Guo authored
The bus bandwidth voting is required to be done before the bus clocks are enabled, and the unvoting is required to be done only after the bus clocks are disabled. Link: https://lore.kernel.org/r/1581392451-28743-4-git-send-email-cang@codeaurora.orgReviewed-by:
Asutosh Das <asutoshd@codeaurora.org> Reviewed-by:
Hongwu Su <hongwus@codeaurora.org> Signed-off-by:
Can Guo <cang@codeaurora.org> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
Asutosh Das authored
This sequence change is required to avoid dips in voltage during boot-up. Apparently, this dip is caused because in the original sequence, the regulators are initialized in lpm mode. And then when the load is set to high, and more current is drawn, than is allowed in lpm, the dip is seen. Link: https://lore.kernel.org/r/1581392451-28743-3-git-send-email-cang@codeaurora.orgReviewed-by:
Bean Huo <beanhuo@micron.com> Reviewed-by:
Stanley Chu <stanley.chu@mediatek.com> Signed-off-by:
-
Sayali Lokhande authored
Exception event can be raised by the device when system suspend is in progress. This will result in unclocked register access in exception event handler as clocks will be turned off during suspend. This change makes sure to flush exception event handler work in suspend before disabling clocks to avoid unclocked register access issue. Link: https://lore.kernel.org/r/1581392451-28743-2-git-send-email-cang@codeaurora.orgReviewed-by:
Sayali Lokhande <sayalil@codeaurora.org> Signed-off-by:
-
Can Guo authored
ADAPT is added specifically for HS Gear4 mode only. Select INITIAL ADAPT before power mode change to G4 and select NO ADAPT before switch to non-G4 modes. [mkp: fixed typo in header file] Link: https://lore.kernel.org/r/1581485910-8307-3-git-send-email-cang@codeaurora.orgSigned-off-by:
Avri Altman <avri.altman@wdc.com> Reviewed-by:
-
Stanley Chu authored
Many vendors would like to disable host TX LCC during initialization flow. Introduce a common function for all users to make drivers easier to read and maintained. This patch does not change any functionality. Link: https://lore.kernel.org/r/20200207070357.17169-3-stanley.chu@mediatek.comReviewed-by:
-
Stanley Chu authored
MediaTek UFS host requires TX LCC to be disabled on both host and device sides. This can be done by disabling host's local TX LCC before link startup. Correct TX LCC disabling timing in MediaTek UFS driver. Link: https://lore.kernel.org/r/20200207070357.17169-2-stanley.chu@mediatek.comReviewed-by:
-
- 11 Feb, 2020 20 commits
-
-
James Smart authored
Update copyrights to 2020 for files modified in the 12.6.0.4 patch set. Link: https://lore.kernel.org/r/20200128002312.16346-13-jsmart2021@gmail.comSigned-off-by:
Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by:
James Smart <jsmart2021@gmail.com> Signed-off-by:
-
James Smart authored
Update lpfc version to 12.6.0.4 Link: https://lore.kernel.org/r/20200128002312.16346-12-jsmart2021@gmail.comSigned-off-by:
-
James Smart authored
The current code does some odd +1 over maximum xri count checks and requires that the lun_queue_count can't be bigger than maximum xri count divided by 8. These items are bogus. Clean the code up to cap lun_queue_count to maximum xri count. Link: https://lore.kernel.org/r/20200128002312.16346-10-jsmart2021@gmail.comSigned-off-by:
-
James Smart authored
There was report of an odd "Fix me..." log message, which was tracked down to the lpfc_els_rcv_rps() routine. This was in handling of a very old and obsolete ELS - Read Port Status. The RPS ELS was defined in FC-LS-1, but deprecated in FC-LS-2, and removed from all later FC-LS revisions. It was replaced by the Read Diagnostic Parameters (RDP) ELS and the Link Error Status Block descriptor. There should be no support for the RSP ELS. Remove support from driver. Link: https://lore.kernel.org/r/20200128002312.16346-9-jsmart2021@gmail.comSigned-off-by:
-
James Smart authored
Coverity reported a memory corruption error for the fdmi attributes routines: CID 15768 [Memory Corruption] Out-of-bounds access on FDMI Sloppy coding of the fmdi structures. In both the lpfc_fdmi_attr_def and lpfc_fdmi_reg_port_list structures, a field was placed at the start of payload that may have variable content. The field was given an arbitrary type (uint32_t). The code then uses the field name to derive an address, which it used in things such as memset and memcpy. The memset sizes or memcpy lengths were larger than the arbitrary type, thus coverity reported an error. Fix by replacing the arbitrary fields with the real field structures describing the payload. Link: https://lore.kernel.org/r/20200128002312.16346-8-jsmart2021@gmail.comSigned-off-by:
-
James Smart authored
The following error is see from the compiler: drivers/scsi/lpfc/lpfc_init.c: In function ‘lpfc_cpuhp_get_eq’: drivers/scsi/lpfc/lpfc_init.c:12660:1: error: the frame size of 1032 bytes is larger than 1024 bytes [-Werror=frame-larger-than=] The issue is due to allocating a cpumask on the stack. Fix by converting to a dynamical allocation of the cpu mask. Link: https://lore.kernel.org/r/20200128002312.16346-7-jsmart2021@gmail.comSigned-off-by: -
James Smart authored
When performing reset testing, the eq's list for related hwqs was getting corrupted. In cases where there is not a 1:1 eq to hwq, the eq is shared. The eq maintains a list of hwqs utilizing it in case of cpu offlining and polling. During the reset, the hwqs are being torn down so they can be recreated. The recreation was getting confused by seeing a non-null eq assignment on the eq and the eq list became corrupt. Correct by clearing the hdwq eq assignment when the hwq is cleaned up. Link: https://lore.kernel.org/r/20200128002312.16346-6-jsmart2021@gmail.comSigned-off-by:
-
James Smart authored
Adjust FC4 Types in FDMI settings The driver sets FDMI information registring ELS as a FC4 type. ELS is a fc3 type and should not be registered. Fix by removing ELS type bit when we register for FDMI Port attributes. Link: https://lore.kernel.org/r/20200128002312.16346-5-jsmart2021@gmail.comSigned-off-by:
-
James Smart authored
When driver is set to enable bb credit recovery, the switch displayed the setting as inactive. If the link bounces, it switches to Active. During link up processing, the driver currently does a MBX_READ_SPARAM followed by a MBX_CONFIG_LINK. These mbox commands are queued to be executed, one at a time and the completion is processed by the worker thread. Since the MBX_READ_SPARAM is done BEFORE the MBX_CONFIG_LINK, the BB_SC_N bit is never set the the returned values. BB Credit recovery status only gets set after the driver requests the feature in CONFIG_LINK, which is done after the link up. Thus the ordering of READ_SPARAM needs to follow the CONFIG_LINK. Fix by reordering so that READ_SPARAM is done after CONFIG_LINK. Added a HBA_DEFER_FLOGI flag so that any FLOGI handling waits until after the READ_SPARAM is done so that the proper BB credit value is set in the FLOGI payload. Fixes: 6bfb1620 ("scsi: lpfc: Fix configuration of BB credit recovery in service parameters") Cc: <stable@vger.kernel.org> # v5.4+ Link: https://lore.kernel.org/r/20200128002312.16346-4-jsmart2021@gmail.comSigned-off-by:
-
James Smart authored
If a call to lpfc_get_cmd_rsp_buf_per_hdwq returns NULL (memory allocation failure), a previously allocated lpfc_io_buf resource is leaked. Fix by releasing the lpfc_io_buf resource in the failure path. Fixes: d79c9e9d ("scsi: lpfc: Support dynamic unbounded SGL lists on G7 hardware.") Cc: <stable@vger.kernel.org> # v5.4+ Link: https://lore.kernel.org/r/20200128002312.16346-3-jsmart2021@gmail.comSigned-off-by:
-
James Smart authored
The driver is occasionally seeing the following SLI Port error, requiring reset and reinit: Port Status Event: ... error 1=0x52004a01, error 2=0x218 The failure means an RQ timeout. That is, the adapter had received asynchronous receive frames, ran out of buffer slots to place the frames, and the driver did not replenish the buffer slots before a timeout occurred. The driver should not be so slow in replenishing buffers that a timeout can occur. When the driver received all the frames of a sequence, it allocates an IOCB to put the frames in. In a situation where there was no IOCB available for the frame of a sequence, the RQ buffer corresponding to the first frame of the sequence was not returned to the FW. Eventually, with enough traffic encountering the situation, the timeout occurred. Fix by releasing the buffer back to firmware whenever there is no IOCB for the first frame. [mkp: typo] Link: https://lore.kernel.org/r/20200128002312.16346-2-jsmart2021@gmail.comSigned-off-by:
-
Bart Van Assche authored
Document the locking assumptions this function relies on and also verify these locking assumptions at runtime. Cc: Quinn Tran <qutran@marvell.com> Cc: Daniel Wagner <dwagner@suse.de> Link: https://lore.kernel.org/r/20200123042345.23886-2-bvanassche@acm.orgAcked-by:
Himanshu Madhani <hmadhani@marvell.com> Reviewed-by:
Martin Wilck <mwilck@suse.com> Reviewed-by:
Roman Bolshakov <r.bolshakov@yadro.com> Signed-off-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
-
Ming Lei authored
Not in use anymore. Remove the flag. Cc: Sathya Prakash <sathya.prakash@broadcom.com> Cc: Chaitra P B <chaitra.basappa@broadcom.com> Cc: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com> Cc: Kashyap Desai <kashyap.desai@broadcom.com> Cc: Sumit Saxena <sumit.saxena@broadcom.com> Cc: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Cc: Ewan D. Milne <emilne@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Bart Van Assche <bart.vanassche@wdc.com> Link: https://lore.kernel.org/r/20200119071432.18558-3-ming.lei@redhat.comReviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Ming Lei <ming.lei@redhat.com> Signed-off-by:
-
Stanley Chu authored
In current UFS driver design, hba->uic_link_state will not be changed after link enters Hibern8 state by Auto-Hibern8 mechanism. In this case, reference clock gating will be skipped unless special handling is implemented in vendor's callbacks. Support reference clock gating during Auto-Hibern8 period in MediaTek Chipsets: If link state is already in Hibern8 while Auto-Hibern8 feature is enabled, gate reference clock in setup_clocks callback. Link: https://lore.kernel.org/r/20200129105251.12466-5-stanley.chu@mediatek.comReviewed-by:
Alim Akhtar <alim.akhtar@samsung.com> Reviewed-by:
-
Stanley Chu authored
Auto-Hibern8 may be disabled by some vendors or sysfs in runtime even if Auto-Hibern8 capability is supported by host. If Auto-Hibern8 capability is supported by host but not actually enabled, Auto-Hibern8 error shall not happen. To fix this, provide a way to detect if Auto-Hibern8 is actually enabled first, and bypass Auto-Hibern8 disabling case in ufshcd_is_auto_hibern8_error(). Fixes: 82174440 ("scsi: ufs: Add error-handling of Auto-Hibernate") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200129105251.12466-4-stanley.chu@mediatek.comReviewed-by:
-
Stanley Chu authored
If system suspend or runtime suspend mode is configured as linkoff state, phy can be powered off and reference clock can be gated in MediaTek Chipsets. At the same time, remove redundant reference clock control in suspend and resume callbacks because such control can be well-handled in setup_clocks callback. Link: https://lore.kernel.org/r/20200129105251.12466-3-stanley.chu@mediatek.comReviewed-by:
-
Stanley Chu authored
MediaTek Chipsets can enter proprietary UniPro low-power mode during suspend while link is in hibern8 state. Make sure leaving low-power mode before every link startup to prevent lockup in any possible error recovery path. At the same time, re-factor related funcitons to improve code readability. Link: https://lore.kernel.org/r/20200129105251.12466-2-stanley.chu@mediatek.comReviewed-by:
-
Colin Ian King authored
There are two statements that are indented one level too deeply, remove the extraneous tabs. [mkp: fix typo spotted by Bart] Link: https://lore.kernel.org/r/20200126154757.42530-1-colin.king@canonical.comReviewed-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Bharath Ravi authored
Connection failure processing depends on a daemon being present to (at least) stop the connection and start recovery. This is a problem on a multipath scenario, where if the daemon failed for whatever reason, the SCSI path is never marked as down, multipath won't perform the failover and IO to the device will be forever waiting for that connection to come back. This patch performs the connection failure entirely inside the kernel. This way, the failover can happen and pending IO can continue even if the daemon is dead. Once the daemon comes alive again, it can execute recovery procedures if applicable. Cc: Mike Christie <mchristi@redhat.com> Cc: Lee Duncan <LDuncan@suse.com> Cc: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20200125061925.191601-1-krisman@collabora.comCo-developed-by:
Dave Clausen <dclausen@google.com> Co-developed-by:
Nick Black <nlb@google.com> Co-developed-by:
Vaibhav Nagarnaik <vnagarnaik@google.com> Co-developed-by:
Anatol Pomazau <anatol@google.com> Co-developed-by:
Tahsin Erdogan <tahsin@google.com> Co-developed-by:
Frank Mayhar <fmayhar@google.com> Co-developed-by:
Junho Ryu <jayr@google.com> Co-developed-by:
Khazhismel Kumykov <khazhy@google.com> Reviewed-by:
Gabriel Krisman Bertazi <krisman@collabora.com> Reviewed-by:
Lee Duncan <lduncan@suse.com> Signed-off-by:
Bharath Ravi <rbharath@google.com> Signed-off-by:
-
Bart Van Assche authored
Reduce code duplication by introducing the tcm_qla2xxx_{get,rel}_cmd() functions. Introduce these functions in the tcm_qla2xxx.c source files such that the qla_target.c source file becomes independent of the SCSI target core header files. This patch fixes a bug, namely by ensuring that qlt_alloc_qfull_cmd() sets cmd->se_cmd.map_tag. Cc: Himanshu Madhani <hmadhani@marvell.com> Link: https://lore.kernel.org/r/20200103192719.205158-1-bvanassche@acm.orgAcked-by:
-
- 10 Feb, 2020 2 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuildLinus Torvalds authored
Pull more Kbuild updates from Masahiro Yamada: - fix randconfig to generate a sane .config - rename hostprogs-y / always to hostprogs / always-y, which are more natual syntax. - optimize scripts/kallsyms - fix yes2modconfig and mod2yesconfig - make multiple directory targets ('make foo/ bar/') work * tag 'kbuild-v5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: make multiple directory targets work kconfig: Invalidate all symbols after changing to y or m. kallsyms: fix type of kallsyms_token_table[] scripts/kallsyms: change table to store (strcut sym_entry *) scripts/kallsyms: rename local variables in read_symbol() kbuild: rename hostprogs-y/always to hostprogs/always-y kbuild: fix the document to use extra-y for vmlinux.lds kconfig: fix broken dependency in randconfig-generated .config
-
- 09 Feb, 2020 12 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefsLinus Torvalds authored
Pull new zonefs file system from Damien Le Moal: "Zonefs is a very simple file system exposing each zone of a zoned block device as a file. Unlike a regular file system with native zoned block device support (e.g. f2fs or the on-going btrfs effort), zonefs does not hide the sequential write constraint of zoned block devices to the user. As a result, zonefs is not a POSIX compliant file system. Its goal is to simplify the implementation of zoned block devices support in applications by replacing raw block device file accesses with a richer file based API, avoiding relying on direct block device file ioctls which may be more obscure to developers. One example of this approach is the implementation of LSM (log-structured merge) tree structures (such as used in RocksDB and LevelDB) on zoned block devices by allowing SSTables to be stored in a zone file similarly to a regular file system rather than as a range of sectors of a zoned device. The introduction of the higher level construct "one file is one zone" can help reducing the amount of changes needed in the application while at the same time allowing the use of zoned block devices with various programming languages other than C. Zonefs IO management implementation uses the new iomap generic code. Zonefs has been successfully tested using a functional test suite (available with zonefs userland format tool on github) and a prototype implementation of LevelDB on top of zonefs" * tag 'zonefs-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs: zonefs: Add documentation fs: New zonefs file system
-
Marc Zyngier authored
In order to allow the GICv4 code to link properly on 32bit ARM, make sure we don't use 64bit divisions when it isn't strictly necessary. Fixes: 4e6437f1 ("irqchip/gic-v4.1: Ensure L2 vPE table is allocated at RD level") Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Cc: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by:
Marc Zyngier <maz@kernel.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull cifs fixes from Steve French: "13 cifs/smb3 patches, most from testing at the SMB3 plugfest this week: - Important fix for multichannel and for modefromsid mounts. - Two reconnect fixes - Addition of SMB3 change notify support - Backup tools fix - A few additional minor debug improvements (tracepoints and additional logging found useful during testing this week)" * tag '5.6-rc-smb3-plugfest-patches' of git://git.samba.org/sfrench/cifs-2.6: smb3: Add defines for new information level, FileIdInformation smb3: print warning once if posix context returned on open smb3: add one more dynamic tracepoint missing from strict fsync path cifs: fix mode bits from dir listing when mounted with modefromsid cifs: fix channel signing cifs: add SMB3 change notification support cifs: make multichannel warning more visible cifs: fix soft mounts hanging in the reconnect code cifs: Add tracepoints for errors on flush or fsync cifs: log warning message (once) if out of disk space cifs: fail i/o on soft mounts if sessionsetup errors out smb3: fix problem with null cifs super block with previous patch SMB3: Backup intent flag missing from some more ops -
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull vboxfs from Al Viro: "This is the VirtualBox guest shared folder support by Hans de Goede, with fixups for fs_parse folded in to avoid bisection hazards from those API changes..." * 'work.vboxsf' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fs: Add VirtualBox guest shared folder (vboxsf) support
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Thomas Gleixner: "A set of fixes for X86: - Ensure that the PIT is set up when the local APIC is disable or configured in legacy mode. This is caused by an ordering issue introduced in the recent changes which skip PIT initialization when the TSC and APIC frequencies are already known. - Handle malformed SRAT tables during early ACPI parsing which caused an infinite loop anda boot hang. - Fix a long standing race in the affinity setting code which affects PCI devices with non-maskable MSI interrupts. The problem is caused by the non-atomic writes of the MSI address (destination APIC id) and data (vector) fields which the device uses to construct the MSI message. The non-atomic writes are mandated by PCI. If both fields change and the device raises an interrupt after writing address and before writing data, then the MSI block constructs a inconsistent message which causes interrupts to be lost and subsequent malfunction of the device. The fix is to redirect the interrupt to the new vector on the current CPU first and then switch it over to the new target CPU. This allows to observe an eventually raised interrupt in the transitional stage (old CPU, new vector) to be observed in the APIC IRR and retriggered on the new target CPU and the new vector. The potential spurious interrupts caused by this are harmless and can in the worst case expose a buggy driver (all handlers have to be able to deal with spurious interrupts as they can and do happen for various reasons). - Add the missing suspend/resume mechanism for the HYPERV hypercall page which prevents resume hibernation on HYPERV guests. This change got lost before the merge window. - Mask the IOAPIC before disabling the local APIC to prevent potentially stale IOAPIC remote IRR bits which cause stale interrupt lines after resume" * tag 'x86-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/apic: Mask IOAPIC entries when disabling the local APIC x86/hyperv: Suspend/resume the hypercall page for hibernation x86/apic/msi: Plug non-maskable MSI affinity race x86/boot: Handle malformed SRAT tables during early ACPI parsing x86/timer: Don't skip PIT setup when APIC is disabled or in legacy mode -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull SMP fixes from Thomas Gleixner: "Two fixes for the SMP related functionality: - Make the UP version of smp_call_function_single() match SMP semantics when called for a not available CPU. Instead of emitting a warning and assuming that the function call target is CPU0, return a proper error code like the SMP version does. - Remove a superfluous check in smp_call_function_many_cond()" * tag 'smp-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: smp/up: Make smp_call_function_single() match SMP semantics smp: Remove superfluous cond_func check in smp_call_function_many_cond() -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Thomas Gleixner: "A set of fixes and improvements for the perf subsystem: Kernel fixes: - Install cgroup events to the correct CPU context to prevent a potential list double add - Prevent an integer underflow in the perf mlock accounting - Add a missing prototype for arch_perf_update_userpage() Tooling: - Add a missing unlock in the error path of maps__insert() in perf maps. - Fix the build with the latest libbfd - Fix the perf parser so it does not delete parse event terms, which caused a regression for using perf with the ARM CoreSight as the sink configuration was missing due to the deletion. - Fix the double free in the perf CPU map merging test case - Add the missing ustring support for the perf probe command" * tag 'perf-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf maps: Add missing unlock to maps__insert() error case perf probe: Add ustring support for perf probe command perf: Make perf able to build with latest libbfd perf test: Fix test case Merge cpu map perf parse: Copy string to perf_evsel_config_term perf parse: Refactor 'struct perf_evsel_config_term' kernel/events: Add a missing prototype for arch_perf_update_userpage() perf/cgroups: Install cgroup events to correct cpuctx perf/core: Fix mlock accounting in perf_mmap() -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer fixes from Thomas Gleixner: "Two small fixes for the time(r) subsystem: - Handle a subtle race between the clocksource watchdog and a concurrent clocksource watchdog stop/start sequence correctly to prevent a timer double add bug. - Fix the file path for the core time namespace file" * tag 'timers-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource: Prevent double add_timer_on() for watchdog_timer MAINTAINERS: Correct path to time namespace source file -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull interrupt fixes from Thomas Gleixner: "A set of fixes for the interrupt subsystem: - Provision only ACPI enabled redistributors on GICv3 - Use the proper command colums when building the INVALL command for the GICv3-ITS - Ensure the allocation of the L2 vPE table for GICv4.1 - Correct the GICv4.1 VPROBASER programming so it uses the proper size - A set of small GICv4.1 tidy up patches - Configuration cleanup for C-SKY interrupt chip - Clarify the function documentation for irq_set_wake() to document that the wakeup functionality is orthogonal to the irq disable/enable mechanism" * tag 'irq-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/gic-v3-its: Rename VPENDBASER/VPROPBASER accessors irqchip/gic-v3-its: Remove superfluous WARN_ON irqchip/gic-v4.1: Drop 'tmp' in inherit_vpe_l1_table_from_rd() irqchip/gic-v4.1: Ensure L2 vPE table is allocated at RD level irqchip/gic-v4.1: Set vpe_l1_base for all redistributors irqchip/gic-v4.1: Fix programming of GICR_VPROPBASER_4_1_SIZE genirq: Clarify that irq wake state is orthogonal to enable/disable irqchip/gic-v3-its: Reference to its_invall_cmd descriptor when building INVALL irqchip: Some Kconfig cleanup for C-SKY irqchip/gic-v3: Only provision redistributors that are enabled in ACPI -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull EFI fix from Thomas Gleixner: "A single fix for a EFI boot regression on X86 which was caused by the recent rework of the EFI memory map parsing. On systems with invalid memmap entries the cleanup function uses an value which cannot be relied on in this stage. Use the actual EFI memmap entry instead" * tag 'efi-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi/x86: Fix boot regression on systems with invalid memmap entries
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull misc SCSI fixes from James Bottomley: "Five small patches, all in drivers or doc, which missed the initial pull request. The qla2xxx and megaraid_sas are actual fixes and the rest are spelling and doc changes" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: ufs: fix spelling mistake "initilized" -> "initialized" scsi: pm80xx: fix spelling mistake "to" -> "too" scsi: MAINTAINERS: ufs: remove pedrom.sousa@synopsys.com scsi: megaraid_sas: fixup MSIx interrupt setup during resume scsi: qla2xxx: Fix unbound NVME response length
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Unbalanced locking in mwifiex_process_country_ie, from Brian Norris. 2) Fix thermal zone registration in iwlwifi, from Andrei Otcheretianski. 3) Fix double free_irq in sgi ioc3 eth, from Thomas Bogendoerfer. 4) Use after free in mptcp, from Florian Westphal. 5) Use after free in wireguard's root_remove_peer_lists, from Eric Dumazet. 6) Properly access packets heads in bonding alb code, from Eric Dumazet. 7) Fix data race in skb_queue_len(), from Qian Cai. 8) Fix regression in r8169 on some chips, from Heiner Kallweit. 9) Fix XDP program ref counting in hv_netvsc, from Haiyang Zhang. 10) Certain kinds of set link netlink operations can cause a NULL deref in the ipv6 addrconf code. Fix from Eric Dumazet. 11) Don't cancel uninitialized work queue in drop monitor, from Ido Schimmel. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (84 commits) net: thunderx: use proper interface type for RGMII mt76: mt7615: fix max_nss in mt7615_eeprom_parse_hw_cap bpf: Improve bucket_log calculation logic selftests/bpf: Test freeing sockmap/sockhash with a socket in it bpf, sockhash: Synchronize_rcu before free'ing map bpf, sockmap: Don't sleep while holding RCU lock on tear-down bpftool: Don't crash on missing xlated program instructions bpf, sockmap: Check update requirements after locking drop_monitor: Do not cancel uninitialized work item mlxsw: spectrum_dpipe: Add missing error path mlxsw: core: Add validation of hardware device types for MGPIR register mlxsw: spectrum_router: Clear offload indication from IPv6 nexthops on abort selftests: mlxsw: Add test cases for local table route replacement mlxsw: spectrum_router: Prevent incorrect replacement of local table routes net: dsa: microchip: enable module autoprobe ipv6/addrconf: fix potential NULL deref in inet6_set_link_af() dpaa_eth: support all modes with rate adapting PHYs net: stmmac: update pci platform data to use phy_interface net: stmmac: xgmac: fix missing IFF_MULTICAST checki in dwxgmac2_set_filter net: stmmac: fix missing IFF_MULTICAST check in dwmac4_set_filter ...
-
