For legacy surfaces, they were previously registered as device resources
when the driver resources were created. Since they are evictable we instead
register them as device resources once they are created on the device,
just like for guest-backed surfaces. This has implications during
hibernation where we can't hibernate with device resources active.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Deepak Rawat <drawat@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>

Use kasprintf instead of combination of kmalloc and sprintf. Also,
remove the local variables used for storing the string length as they
are not required now.
Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>

It was used to early block fbdev dirty processing. Replace it with an
unprotected check of the par->dirty.active field. While this might
race with the vmw_fb_off() function, we do a protected check later so
the race will at worst lead to grabbing and releasing a couple of locks.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>

Make it possible to hibernate also with masters that don't switch VT at
hibernation time. We save and restore modesetting state unless fbdev is
active and enabled at hibernation time.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>

fbdev framebuffers were previously pinned to be able to keep them mapped
across updates.

This commit introduces a mechanism that instead revalidates the map on
each update, keeping the map cached across updates. The cached map is torn
down if the underlying pages change. Typically on buffer object moves and
swapouts.

This should be nicer to the system when we have resource contention.

Testing done: Basic fbdev functionality under Fedora 27.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Deepak Rawat <drawat@vmware.com>

The start / stop and preempt commands don't honor the context argument
but rather acts on all available contexts.

Also add detection for context 1 availability.

Note that currently there's no driver interface for submitting buffers
using the high-priority command queue (context 1).

Testing done:
Change the default context for command submission to 1 instead of 0,
verify basic desktop functionality including faulty command injection and
recovery.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Deepak Rawat <drawat@vmware.com>

This blit was previously performed using two large vmaps, one of which
was teared down and remapped on each blit. Use the more resource-
conserving TTM cpu blit instead.

The blit is used in boundary-box computing mode which makes it possible
to minimize the bounding box used in host operations.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>

The utility uses kmap_atomic() instead of vmapping the whole buffer
object. As a result there will be more book-keeping but on some
architectures this will help avoid exhausting vmalloc space and also
avoid expensive TLB flushes.

The blit utility also adds a provision to compute a bounding box of
changed content, which is very useful to optimize presentation speed
of ill-behaved applications that don't supply proper damage regions, and
for page-flips. The cost of computing the bounding box is not that
expensive when done in a cpu-blit utility like this.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>

It will be used by vmwgfx cpu blit.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>

Use helpers to perform the kmap_atomic_prot() functionality to
a) Avoid in-function ifdefs that violate the kernel coding policy,
b) Facilitate exporting the functionality.

This commit should not change any functionality.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>

Use drm_plane_helper_check_update also for the cursor plane.
Some applications, like gdm on gnome shell still uses cursor front-buffer
like rendering without notifying the kernel. We do need some kind of
noficiation, but work around this for now by updating the cursor image on
every cursor move.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>

Page flip can be slow for vmwgfx in some cases, like need to do surface
copy to different surface or waiting for IN_FENCE_FD. Enabling
nonblocking commits for vmwgfx in case userspace request it.
Signed-off-by: Deepak Rawat <drawat@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>

Atomic ioctl can also send the same page flip flags as legacy ioctl.
In those cases also need to send the vblank event to userspace.

vmwgfx does not support flag DRM_MODE_PAGE_FLIP_ASYNC, so this flag is
never expected.
Signed-off-by: Deepak Rawat <drawat@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>

The dmabuf_dirty/surface_dirty in case of screen object is moved to
plane atomic update, so that page flip in atomic ioctl also works.

vmwgfx does not support DRM_MODE_PAGE_FLIP_ASYNC, so this flag is never
expected.
Signed-off-by: Deepak Rawat <drawat@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>

The function drm_crtc_arm_vblank_event should be used for the driver
which have vblank interrupt support. In case of vmwgfx we do not have
vblank interrupt.
Signed-off-by: Deepak Rawat <drawat@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>

When display surface is different than the framebuffer surface, atomic
path do not copy the surface data. This commit moved the code to copy
surface from legacy to atomic path.
Signed-off-by: Deepak Rawat <drawat@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>

In case of page flip there is no need to iterate over all display unit
in the function "vmw_kms_helper_dirty". If crtc is available then
dirty commands is performed on that crtc only.
Signed-off-by: Deepak Rawat <drawat@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>

omapdrm patches for v4.17

* Fix sparse warnings from omapdrm
* HPD support for DVI connector
* Big cleanup to remove static variables

* tag 'omapdrm-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (69 commits)
  drm/omap: fix compile error when DPI is disabled
  drm/omap: fix compile error when debugfs is disabled
  drm: omapdrm: displays: panel-dsi-cm: Fix field access before set
  drm/omap: cleanup color space conversion
  drm/omap: Allow HDMI audio setup even if we do not have video configured
  drm/omap: fix maximum sizes
  drm/omap: add writeback funcs to dispc_ops
  drm/omap: fix scaling limits for WB
  drm/omap: fix WB height with interlace
  drm/omap: fix WBDELAYCOUNT with interlace
  drm/omap: fix WBDELAYCOUNT for HDMI
  drm/omap: set WB channel-in in wb_setup()
  drm/omap: Add pclk setting case when channel is DSS_WB
  drm/omap: dispc: disp_wb_setup to check return code
  drm/omap: remove leftover enums
  dt-bindings: display: add HPD gpio to DVI connector
  drm/omap: add HPD support to connector-dvi
  drm/omap: Init fbdev emulation only when we have displays
  drm/omap: cleanup fbdev init/free
  drm/omap: fix omap_fbdev_free() when omap_fbdev_create() wasn't called
  ...

Updates for 4.17.  Sorry, running a bit late on this, didn't have a
chance to send pull-req before heading to linaro.  But it has all been
in linux-next for a while.  Main updates:

 + DSI updates from 10nm / SDM845
 + fix for race condition with a3xx/a4xx fence completion irq
 + some refactoring/prep work for eventual a6xx support (ie. when we have
   a userspace)
 + a5xx debugfs enhancements
 + some mdp5 fixes/cleanups to prepare for eventually merging writeback
   support (ie. when we have a userspace)

* tag 'drm-msm-next-2018-03-20' of git://people.freedesktop.org/~robclark/linux: (36 commits)
  drm/msm: fix building without debugfs
  drm/msm/mdp5: don't pre-reserve LM's if no dual-dsi
  drm/msm/mdp5: add missing LM flush bits
  drm/msm/mdp5: print a bit more of the atomic state
  drm/msm/mdp5: rework CTL START signal handling
  drm/msm: Trigger fence completion from GPU
  drm/msm/dsi: fix direct caller of msm_gem_free_object()
  drm/msm: strip out msm_fence_cb
  drm/msm: rename mdp->disp
  drm/msm/dsi: Fix potential NULL pointer dereference in msm_dsi_modeset_init
  drm/msm/adreno/a5xx_debugfs: fix potential NULL pointer dereference
  drm/msm/dsi: Get byte_intf_clk only for versions that need it
  drm/msm/adreno: Use generic function to load firmware to a buffer object
  drm/msm/adreno: Define a list of firmware files to load per target
  drm/msm/adreno: Rename gpmufw to powerfw
  drm/msm: Pass the correct aperture end to drm_mm_init
  drm/msm/gpu: Set number of clocks to 0 if the list allocation fails
  drm/msm: Replace gem_object deprecated functions
  drm/msm/hdmi: fix semicolon.cocci warnings
  drm/msm/mdp5: Fix trailing semicolon
  ...

drm/tegra: Changes for v4.17-rc1

This fixes mmap() for fbdev devices by providing a custom implementation
based on the KMS variant. This is a fairly exotic case these days, hence
why it is not flagged for stable.

There is also support for dedicating one of the overlay planes to serve
as a hardware cursor on older Tegra that did support hardware cursors
but not RGBA formats for it.

Planes will now also export the IN_FORMATS property by supporting the
various block-linear tiling modifiers for RGBA pixel formats.

Other than that, there's a bit of cleanup of DMA API abuse, use of the
private object infrastructure for global state (rather than subclassing
atomic state objects) and an implementation of ->{begin,end}_cpu_access
callbacks for PRIME exported buffers, which allow users to perform cache
maintenance on these buffers.

* tag 'drm/tegra/for-4.17-rc1' of git://anongit.freedesktop.org/tegra/linux:
  drm/tegra: prime: Implement ->{begin,end}_cpu_access()
  drm/tegra: gem: Map pages via the DMA API
  drm/tegra: hub: Use private object for global state
  drm/tegra: fb: Properly support linear modifier
  drm/tegra: plane: Support format modifiers
  drm/tegra: dc: Dedicate overlay plane to cursor on older Tegra's
  drm/tegra: plane: Make tegra_plane_get_overlap_index() static
  drm/tegra: fb: Implement ->fb_mmap() callback
  drm/tegra: gem: Make __tegra_gem_mmap() available more widely
  drm/tegra: gem: Reshuffle declarations

I have accumulated some patches as we went through some internal testing
for mali-dp and I was waiting for the YUV2RGB patches to land in your
tree.

* 'for-upstream/mali-dp' of git://linux-arm.org/linux-ld:
  drm: mali-dp: Add YUV->RGB conversion support for video layers
  drm: mali-dp: Turn off CRTC vblank when removing module.
  drm: arm: malidp: Use drm_atomic_helper_shutdown() to disable planes on removal
  drm: arm: malidp: Don't destroy planes manually in error handlers
  drm/mali-dp: Fix malidp_atomic_commit_hw_done() for event sending.
  drm/arm/malidp: Disable pixel alpha blending for colors that do not have alpha
  drm: mali-dp: Fix bug on scaling with rotation
  drm/mali-dp: Don't enable scaling engine for planes that only rotate.
  drm: mali-dp: Uninitialized variable in malidp_se_check_scaling()
  drm/mali-dp: Align pitch size to be multiple of bus burst read size.
  drm/mali-dp: Rotated planes need a larger pitch size.

- Continued cleanup and restructuring of powerplay
- Fetch VRAM type from vbios rather than hardcoding for SOC15 asics
- Allow ttm to drop its backing store when drivers don't need it
- DC bandwidth calc updates
- Enable DC backlight control pre-DCE11 asics
- Enable DC on all supported asics
- DC Fixes for planes due to the way our hw is ordered vs what drm expects
- DC CTM/regamma fixes
- Misc cleanup and bug fixes

* 'drm-next-4.17' of git://people.freedesktop.org/~agd5f/linux: (89 commits)
  amdgpu/dm: Default PRE_VEGA ASIC support to 'y'
  drm/amd/pp: Remove the cgs wrapper for notify smu version on APU
  drm/amd/display: fix dereferencing possible ERR_PTR()
  drm/amd/display: Refine disable VGA
  drm/amdgpu: Improve documentation of bo_ptr in amdgpu_bo_create_kernel
  drm/radeon: Don't turn off DP sink when disconnected
  drm/amd/pp: Rename file name cz_* to smu8_*
  drm/amd/pp: Replace function/struct name cz_* with smu8_*
  drm/amd/pp: Remove unneeded void * casts in cz_hwmgr.c/cz_smumgr.c
  drm/amd/pp: Mv cz uvd/vce pg/dpm functions to cz_hwmgr.c
  drm/amd/pp: Remove dead header file pp_asicblocks.h
  drm/amd/pp: Delete dead code on cz_clockpowergating.c
  drm/amdgpu: Call amdgpu_ucode_fini_bo in amd_powerplay.c
  drm/amdgpu: Remove wrapper layer of smu ip functions
  drm/amdgpu: Don't compared ip_block_type with ip_block_index
  drm/amdgpu: Plus NULL function pointer check
  drm/amd/pp: Move helper functions to smu_help.c
  drm/amd/pp: Replace rv_* with smu10_*
  drm/amd/pp: Fix function parameter not correct
  drm/amd/pp: Add rv_copy_table_from/to_smc to smu backend function table
  ...

The adreno driver stopped building when CONFIG_DEBUGFS is disabled:

drivers/gpu/drm/msm/adreno/adreno_device.c: In function 'adreno_load_gpu':
drivers/gpu/drm/msm/adreno/adreno_device.c:153:16: error: 'const struct msm_gpu_funcs' has no member named 'debugfs_init'
  if (gpu->funcs->debugfs_init) {
                ^~
drivers/gpu/drm/msm/adreno/adreno_device.c:154:13: error: 'const struct msm_gpu_funcs' has no member named 'debugfs_init'
   gpu->funcs->debugfs_init(gpu, dev->primary);
             ^~

This adds an #ifdef around the code that references the hidden
pointer.

Fixes: 331dc0bc ("drm/msm: add a5xx specific debugfs")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Rob Clark <robdclark@gmail.com>

If there is only a single DSI interface, don't reserve the first two
layer-mixers for the dual-DSI use-case.

This was causing problems for WB, not being able to assign a LM, on
8x16, which has only two LM's and a single DSI.
Signed-off-by: Rob Clark <robdclark@gmail.com>

For some reason, layer-mixer 3 and 4 were missing.  LM3 is used for
writeback on 8x16.
Signed-off-by: Rob Clark <robdclark@gmail.com>

Signed-off-by: Rob Clark <robdclark@gmail.com>

For DSI cmd-mode and writeback, we need to write the CTL's START
register to kick things off, but we only want to do that once both
the encoder and the crtc have a chance to write their corresponding
flush bits.  The difficulty is that when there is a full modeset
(ie. encoder state has changed) we want to defer the start until
encoder->enable().  But if only plane's have changed, we want to do
this from crtc->commit().

The start_mask was a previous attempt to handle this, but it didn't
really do the right thing since atomic conversion.

Instead track in the crtc state that the start should be deferred,
set to try from encoder's (or in future writeback's) atomic_check().
This way the state is part of the atomic state, and rollback can
work properly if an atomic test fails.
Signed-off-by: Rob Clark <robdclark@gmail.com>

Interrupt commands causes the CP to trigger an interrupt as the command
is processed, regardless of the GPU being done processing previous
commands. This is seen by the interrupt being delivered before the
fence is written on 8974 and is likely the cause of the additional
CP_WAIT_FOR_IDLE workaround found for a306, which would cause the CP to
wait for the GPU to go idle before triggering the interrupt.

Instead we can set the (undocumented) BIT(31) of the CACHE_FLUSH_TS
which will cause a special CACHE_FLUSH_TS interrupt to be triggered from
the GPU as the write event is processed.

Add CACHE_FLUSH_TS to the IRQ masks of A3xx and A4xx and remove the
workaround for A306.
Suggested-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

This should be using drm_gem_object_put().  Also since this is done only
in driver unload path, we don't need to synchronize setting tx_gem_obj
to NULL, so juse use the _unlocked() variant.
Signed-off-by: Rob Clark <robdclark@gmail.com>

Remnants of pre-dma_fence fencing which got left behind by mistake.
Signed-off-by: Rob Clark <robdclark@gmail.com>

Since new display controller is called "dpu" instead of "mdp".  Lets
make the name of the toplevel directory for the display controllers a
bit more generic.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>

_dev_ is being dereferenced before it is null checked, hence there
is a potential null pointer dereference.

Fix this by moving the pointer dereference after _dev_ has been
null checked.

Fixes: d4e7f38d70ef ("drm/msm/dsi: check msm_dsi and dsi pointers before use")
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>

_minor_ is being dereferenced before it is null checked, hence there
is a potential null pointer dereference. Fix this by moving the pointer
dereference after _minor_ has been null checked.

Fixes: 024ad8df763f ("drm/msm: add a5xx specific debugfs")
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>

These callbacks allow the exporter to swap in and pin the backing
storage for buffers as well as invalidate the cache in preparation for
accessing the buffer from the CPU, and flush the cache and unpin the
backing storage when the CPU is done modifying the buffer.
Signed-off-by: Thierry Reding <treding@nvidia.com>

When allocating pages, map them with the DMA API in order to invalidate
caches. This is the correct usage of the API and works just as well as
faking up the SG table and using the dma_sync_sg_for_device() function.
Signed-off-by: Thierry Reding <treding@nvidia.com>

Rather than subclass the global atomic state to store the hub display
clock and rate, create a private object and store this data in its
state.
Signed-off-by: Thierry Reding <treding@nvidia.com>

Even though we default PRE_VEGA support to 'n' upstream in amd-staging
we want to keep it enabled by default.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Refine commit f49e9bac ("drm/amd/pp: Get and save Rv smu version")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This patch fixes static checker warning caused by
"36cc549d: "drm/amd/display: disable CRTCs with
NULL FB on their primary plane (V2)"
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Shirish S <shirish.s@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

bad case won't follow normal sense, it will not enable vga1 as usual, but vga2,3,4 is on.
Signed-off-by: Clark Zheng <clark.zheng@amd.com>
Reviewed-by: Tony Cheng <tony.cheng@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>