- 05 Oct, 2012 1 commit
-
-
Lad, Prabhakar authored
recent patch with commit id 4f996594 which makes vidioc_s_crop const, was causing a following build error. vpfe_capture.c: In function 'vpfe_s_crop': vpfe_capture.c:1695: error: assignment of read-only location '*crop' vpfe_capture.c:1706: warning: passing argument 1 of 'ccdc_dev->hw_ops.set_image_window' discards qualifiers from pointer target type vpfe_capture.c:1706: note: expected 'struct v4l2_rect *' but argument is of type 'const struct v4l2_rect *' make[4]: *** [drivers/media/platform/davinci/vpfe_capture.o] Error 1 Signed-off-by:
Lad, Prabhakar <prabhakar.lad@ti.com> Signed-off-by:
Manjunath Hadli <manjunath.hadli@ti.com> Acked-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
- 02 Oct, 2012 22 commits
-
-
Mauro Carvalho Chehab authored
As em28xx-dvb will always be initialized asynchronously, there's no need anymore for a separate thread to load the DRX-K firmware. Fixes a known regression with kernel 3.6 with tda18271 driver and asynchronous DRX-K firmware load. Antti tested it with the following hardware: Hauppauge WinTV HVR 930C MaxMedia UB425-TC PCTV QuatroStick nano (520e) Tested-by:Antti Palosaari <crope@iki.fi> Cc: stable@kernel.org # for Kernel 3.6 - please note that driver location has changed Signed-off-by:
-
Mauro Carvalho Chehab authored
Due to udev-182, the firmware load was changed to be async, as otherwise udev would give up of loading a firmware. Add an option to return to the previous behaviour, async firmware loads cause failures with the tda18271 driver. Antti tested it with the following hardware: Hauppauge WinTV HVR 930C MaxMedia UB425-TC PCTV QuatroStick nano (520e) Tested-by: -
Mauro Carvalho Chehab authored
em28xx-dvb, em28xx-alsa and em28xx-ir are typically initialized asyncrhronously. The exception for it is when those modules are loaded before em28xx (or before an em28xx card insertion) or when they're built in. Make the extentions to always load asynchronously. That allows having all DVB firmwares loaded synchronously with udev-182. Antti tested it with the following hardware: Hauppauge WinTV HVR 930C MaxMedia UB425-TC PCTV QuatroStick nano (520e) Tested-by:
-
Michael Krufky authored
Until now, if there is a read error in tda18271_get_id, the driver reports "Unknown device..." Instead, check the return value of tda18271_read_regs and display the appropriate error message. Signed-off-by:
Michael Krufky <mkrufky@linuxtv.org> Signed-off-by:
-
Michael Krufky authored
if the configuration option 'delay_cal' is set, delay both IR & RF calibration until init() is called. both module option 'cal' or configuration option 'rf_cal_on_startup' will override this delay. it makes no sense to mix 'delay_cal' with 'rf_cal_on_startup' as these options conflict with each other. Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
-
Sylwester Nawrocki authored
The mixer video node supports only multi-planar API so the driver should not be setting V4L2_CAP_VIDEO_OUTPUT flags. Fix this and also switch to device_caps. Additionally fix the VIDIOC_ENUM_FMT ioctl handler which now works for V4L2_BUF_TYPE_CAPTURE, rather than expected V4L2_BUF_TYPE_CAPTURE_MPLANE. Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by:
-
Sachin Kamat authored
return statement was wrongly placed before a code that needs to be executed. Moved the return statement to the end of the function. Tested suspend/resume on SMDK4412 board using 3.5-rc6 kernel. Signed-off-by:
Sachin Kamat <sachin.kamat@linaro.org> Acked-by:
Kamil Debski <k.debski@samsung.com> Signed-off-by:
-
Sachin Kamat authored
Fixes the following warnings: drivers/media/platform/exynos-gsc/gsc-core.c:313:5: warning: symbol 'get_plane_info' was not declared. Should it be static? drivers/media/platform/exynos-gsc/gsc-core.c:746:28: warning: symbol 'gsc_ctrl_ops' was not declared. Should it be static? drivers/media/platform/exynos-gsc/gsc-m2m.c:102:5: warning: symbol 'gsc_fill_addr' was not declared. Should it be static? drivers/media/platform/exynos-gsc/gsc-m2m.c:252:16: warning: symbol 'gsc_m2m_qops' was not declared. Should it be static? Signed-off-by:
-
Sachin Kamat authored
version.h is not needed for these files. Signed-off-by:
-
Sachin Kamat authored
Fixes a typo in a conditional evaluation. Signed-off-by:
-
Sachin Kamat authored
When mdev is NULL, the error print statement will try to dereference the NULL pointer. Signed-off-by:
Tomasz Stanislawski <t.stanislaws@samsung.com> Signed-off-by:
-
Sylwester Nawrocki authored
Make sure __s5k6aa_get_crop_rect() always returns valid pointer, as it is assumed at the callers. crop->which is already validated when subdev set_crop and get_crop callbacks are called from within the v4l2-core. If it ever happens the crop operations are called directly for some reason in kernel space, with incorrect crop->which argument, just log it with WARN and return reference to the TRY crop. Reported-by:
-
Andrzej Hajda authored
All code setting/clearing working context bits has been moved to separate functions. set_bit/clear_bit have been replaced by non-atomic variants - variable is already guarded by spin_lock. Signed-off-by:
Andrzej Hajda <a.hajda@samsung.com> Signed-off-by:
-
Andrzej Hajda authored
s5p-mfc encoder after receiving V4L2_ENC_CMD_STOP command will instruct MFC device to release all encoded frames. After dequeuing last encoded frame driver will generate V4L2_EVENT_EOS event. Signed-off-by:
-
- 01 Oct, 2012 17 commits
-
-
Sylwester Nawrocki authored
Without the locking the driver's data could get corrupted when the subdev is accessed from user space and from host driver by multiple processes. Signed-off-by:
-
Sylwester Nawrocki authored
Since all host drivers using this subdev are already using the control framework these compatibility ops can be removed. Signed-off-by:
-
Sylwester Nawrocki authored
Use a copy of sensor platform data structure, rather than referencing external platform data from the driver. This allows to fill the local copy with values parsed from device tree when needed. Signed-off-by:
-
Sylwester Nawrocki authored
Add hardware event/error counters which can be dumped into the kernel log through VIDIOC_LOG_STATUS ioctl. The counters are reset in each s_stream(1) call. Any errors are logged after streaming is turned off. Signed-off-by:
-
Sachin Kamat authored
Silences the following warnings: WARNING: sizeof *ctx should be sizeof(*ctx) WARNING: sizeof *dev should be sizeof(*dev) Signed-off-by:
-
Sachin Kamat authored
Silences the following warning: WARNING: sizeof *ctx should be sizeof(*ctx) Signed-off-by:
-
Sachin Kamat authored
Silences the following warning: WARNING: Use #include <linux/sizes.h> instead of <asm/sizes.h> Signed-off-by:
-
Sylwester Nawrocki authored
In order to reuse the FIMC-LITE module on Exynos4 and Exynos5 SoC introduce a set of callbacks for the media pipeline control from within FIMC/FIMC-LITE video node. It lets us avoid symbol dependencies between FIMC-LITE and the whole media device driver, which simplifies the initialization sequences and doesn't introduce issues preventing common kernel image for exynos4 and exynos5 SoCs. This patch also corrects following build errors: drivers/built-in.o: In function `buffer_queue': drivers/media/video/s5p-fimc/fimc-lite.c:414: undefined reference to `fimc_pipeline_s_stream' drivers/built-in.o: In function `fimc_lite_resume': drivers/media/video/s5p-fimc/fimc-lite.c:1518: undefined reference to `fimc_pipeline_initialize' drivers/built-in.o: In function `fimc_lite_suspend': drivers/media/video/s5p-fimc/fimc-lite.c:1544: undefined reference to `fimc_pipeline_shutdown' when only CONFIG_VIDEO_EXYNOS_FIMC_LITE is selected, without CONFIG_VIDEO_S5P_FIMC. Reported-by:
-
Sachin Kamat authored
Silences the following warning: WARNING: sizeof *ctx should be sizeof(*ctx) Signed-off-by:
-
Sylwester Nawrocki authored
When setting image format on subdev's sink pad there was no propagation to the source pad. This resulted in wrong reported format on the source pad and wrong device configuration when used from subdev interace level only. Correct this by propagating format from the sink to the source pad. Signed-off-by:
-
Sylwester Nawrocki authored
Replace erroneous V4L2_PIX_FMT_* entries with their V4L2_MBUS_FMT_* counterparts. This enables use of raw Bayer formats on FIMC-LITE.? subdevs. Signed-off-by:
-
Michael Krufky authored
Ensure that unnecessary features are powered down at the end of the attach() function on attach of the tuner's first instance. If the configuration requires the loop thru or xtout features, they will remain enabled. This must *only* be done after attaching the first instance of the tuner. If there are multiple instances of the tuner, the bridge driver will need to maintain power managament by itself. Signed-off-by:
-
Michael Krufky authored
Ensure that unnecessary features are powered down at the end of the attach() function. If the configuration requires the loop thru or xtout features, they will remain enabled. Thanks to Antti Palosaari for noticing the additional power consumption. Signed-off-by:
-
Hans Verkuil authored
Depending on the device node only the compressed or the uncompressed format should be shown, not both. Signed-off-by:
-
Hans Verkuil authored
The VBI capture for the decoder (/dev/vbi8) is special in that it captures the VBI stream embedded in an MPEG stream that is being decoded. A lot of the ioctls that would normally be valid have to be disabled since they make no sense for such a device, and v4l2-compliance will complain about that. Signed-off-by:
-
Hans Verkuil authored
Found with v4l2-compliance. Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
