- 29 Mar, 2011 2 commits
-
-
Xose Vazquez Perez authored
taken from staging/rt2860 0x0411,0x016f de37cd49 MelCo(Buffalo) WLI-UC-G301N 0x050d,0x825b 12840c63 Belkin F5D8055 0x050d,0x935a 705059a6 Belkin F6D4050 v1 0x050d,0x935b 5d92fe33 Belkin F6D4050 v2 identifed from ralink driverss 0x0930,0x0a07 RT35xx TOSHIBA 2010_1215_RT3572_Linux_STA_v2.5.0.0.DPO 0x1d4d,0x0011 3072 Pegatron 2011_0107_RT3070_RT3370_Linux_STA_v2.5.0.1_DPO Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Stanislaw Gruszka authored
Software scanning can be used for workaround some performance problems, so do not deprecate it. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
- 28 Mar, 2011 7 commits
-
-
Daniel Halperin authored
Suppose the aggregation reorder buffer looks like this: x-T-R1-y-R2, where x and y are frames that have not been received, T is a received frame that has timed out, and R1,R2 are received frames that have not yet timed out. The proper behavior in this scenario is to move the window past x (skipping it), release T and R1, and leave the window at y until y is received or R2 times out. As written, this code will instead leave the window at R1, because it has not yet timed out. Fix this by exiting the reorder loop only when the frame that has not timed out AND there are skipped frames earlier in the current valid window. Signed-off-by: Daniel Halperin <dhalperi@cs.washington.edu> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Juuso Oikarinen authored
This patch adds to the fix "fix BSS double-unlinking" (commit 3207390a) by Johannes Berg. It turns out, that the double-unlinking scenario can also occur if expired BSS elements are removed whilst an interface is performing association. To work around that, replace list_del with list_del_init also in the "cfg80211_bss_expire" function, so that the check for whether the BSS still is in the list works correctly in cfg80211_unlink_bss. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Mariusz Kozlowski authored
In cfg80211_inform_bss_frame() wiphy is first dereferenced on privsz initialisation and then it is checked for NULL. This patch fixes that. Signed-off-by: Mariusz Kozlowski <mk@lab.zgora.pl> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Mariusz Kozlowski authored
This patch moves 'key' dereference after BUG_ON(!key) so that when key is NULL we will see proper trace instead of oops. Signed-off-by: Mariusz Kozlowski <mk@lab.zgora.pl> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Petr Štetiar authored
The ieee80211_key struct can be kfree()d several times in the function, for example if some of the key setup functions fails beforehand, but there's no check if the struct is still valid before we call memcpy() and INIT_LIST_HEAD() on it. In some cases (like it was in my case), if there's missing aes-generic module it could lead to the following kernel OOPS: Unable to handle kernel NULL pointer dereference at virtual address 0000018c .... PC is at memcpy+0x80/0x29c ... Backtrace: [<bf11c5e4>] (ieee80211_key_alloc+0x0/0x234 [mac80211]) from [<bf1148b4>] (ieee80211_add_key+0x70/0x12c [mac80211]) [<bf114844>] (ieee80211_add_key+0x0/0x12c [mac80211]) from [<bf070cc0>] (__cfg80211_set_encryption+0x2a8/0x464 [cfg80211]) Signed-off-by: Petr Štetiar <ynezz@true.cz> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Felix Fietkau authored
When the chip is still asleep when ath9k_start is called, ath9k_hw_configpcipowersave can trigger a data bus error. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Felix Fietkau authored
When a client connects in HT mode but does not provide any valid MCS rates, the function that finds the next sample rate gets stuck in an infinite loop. Fix this by falling back to legacy rates if no usable MCS rates are found. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
- 24 Mar, 2011 7 commits
-
-
Thomas Gleixner authored
After we made debugobjects working again, we got the following: WARNING: at lib/debugobjects.c:262 debug_print_object+0x8e/0xb0() Hardware name: System Product Name ODEBUG: free active (active state 0) object type: timer_list hint: hci_cmd_timer+0x0/0x60 Pid: 2125, comm: dmsetup Tainted: G W 2.6.38-06707-gc62b3898 #110375 Call Trace: [<ffffffff8104700a>] warn_slowpath_common+0x7a/0xb0 [<ffffffff810470b6>] warn_slowpath_fmt+0x46/0x50 [<ffffffff812d3a5e>] debug_print_object+0x8e/0xb0 [<ffffffff81bd8810>] ? hci_cmd_timer+0x0/0x60 [<ffffffff812d4685>] debug_check_no_obj_freed+0x125/0x230 [<ffffffff810f1063>] ? check_object+0xb3/0x2b0 [<ffffffff810f3630>] kfree+0x150/0x190 [<ffffffff81be4d06>] ? bt_host_release+0x16/0x20 [<ffffffff81be4d06>] bt_host_release+0x16/0x20 [<ffffffff813a1907>] device_release+0x27/0xa0 [<ffffffff812c519c>] kobject_release+0x4c/0xa0 [<ffffffff812c5150>] ? kobject_release+0x0/0xa0 [<ffffffff812c61f6>] kref_put+0x36/0x70 [<ffffffff812c4d37>] kobject_put+0x27/0x60 [<ffffffff813a21f7>] put_device+0x17/0x20 [<ffffffff81bda4f9>] hci_free_dev+0x29/0x30 [<ffffffff81928be6>] vhci_release+0x36/0x70 [<ffffffff810fb366>] fput+0xd6/0x1f0 [<ffffffff810f8fe6>] filp_close+0x66/0x90 [<ffffffff810f90a9>] sys_close+0x99/0xf0 [<ffffffff81d4c96b>] system_call_fastpath+0x16/0x1b That timer was introduced with commit 6bd32326(Bluetooth: Use proper timer for hci command timout) Timer seems to be running when the thing is closed. Removing the timer unconditionally fixes the problem. And yes, it needs to be fixed before the HCI_UP check. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
-
Andrei Emeltchenko authored
Sometimes L2CAP connection remains hanging. Make sure that L2CAP channel is deleted. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
-
Johan Hedberg authored
The code was correctly calling _unlock at the end of the function but there was no actual _lock call anywhere. Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
-
Vinicius Costa Gomes authored
Now that we have support for LE connections, before discarding a frame we must check if there's a LE connection over that transport. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org> Acked-by: Ville Tervo <ville.tervo@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
-
Gustavo F. Padovan authored
We can't send new commands before a cmd_complete for the HCI_RESET command shows up. Reported-by: Mikko Vinni <mmvinni@yahoo.com> Reported-by: Justin P. Mattock <justinmattock@gmail.com> Reported-by: Ed Tomlinson <edt@aei.ca> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi> Tested-by: Justin P. Mattock <justinmattock@gmail.com> Tested-by: Mikko Vinni <mmvinni@yahoo.com> Tested-by: Ed Tomlinson <edt@aei.ca>
-
Suraj Sumangala authored
This patch lets 'l2cap_pinfo.unacked_frames' be incremented only the first time a frame is transmitted. Previously it was being incremented for retransmitted packets too resulting the value to cross the transmit window size. Signed-off-by: Suraj Sumangala <suraj@atheros.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
-
Marc-Antoine Perennou authored
Just adding the vendor details makes it work fine. Signed-off-by: Marc-Antoine Perennou <Marc-Antoine@Perennou.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
-
- 23 Mar, 2011 4 commits
-
-
Senthil Balasubramanian authored
commit 86271e46 introduced a regression that caused mac80211 queues in stopped state. ath_drain_all_txq is called in driver flush which would reset the stopped flag and the mac80211 queues were never started after that. iperf traffic is completely stalled due to this issue. Restart the mac80211 queues in driver flush only if the txqs were drained. Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Senthil Balasubramanian authored
With the recent tx status optimization in mac80211, we bail out as and and when invalid rate index is found. So the behavior of resetting rate idx to -1 and count to 0 has changed for the rate indexes that were not part of the driver's retry series. This has resulted in ath9k using incorrect rate table index which caused the system to panic. Ideally ath9k need to loop only for the indexes that were part of the retry series and so simply use hw->max_rates as the loop counter. Pasted the stack trace of the panic issue for reference. [ 754.093192] BUG: unable to handle kernel paging request at ffff88046a9025b0 [ 754.093256] IP: [<ffffffffa02eac49>] ath_tx_status+0x209/0x2f0 [ath9k] [ 754.094888] Call Trace: [ 754.094903] <IRQ> [ 754.094928] [<ffffffffa051f883>] ieee80211_tx_status+0x203/0x9e0 [mac80211] [ 754.094975] [<ffffffffa053e305>] ? __ieee80211_wake_queue+0x125/0x140 [mac80211] [ 754.095017] [<ffffffffa02e66c9>] ath_tx_complete_buf+0x1b9/0x370 [ath9k] [ 754.095054] [<ffffffffa02e6fcf>] ath_tx_complete_aggr+0x51f/0xb50 [ath9k] [ 754.095098] [<ffffffffa05382a3>] ? ieee80211_prepare_and_rx_handle+0x173/0xab0 [mac80211] [ 754.095148] [<ffffffff81350e62>] ? _raw_spin_unlock_irqrestore+0x32/0x40 [ 754.095186] [<ffffffffa02e9735>] ath_tx_tasklet+0x365/0x4b0 [ath9k] [ 754.095224] [<ffffffff8107a2a2>] ? clockevents_program_event+0x62/0xa0 [ 754.095261] [<ffffffffa02e2628>] ath9k_tasklet+0x168/0x1c0 [ath9k] [ 754.095298] [<ffffffff8105599b>] tasklet_action+0x6b/0xe0 [ 754.095331] [<ffffffff81056278>] __do_softirq+0x98/0x120 [ 754.095361] [<ffffffff8100cd5c>] call_softirq+0x1c/0x30 [ 754.095393] [<ffffffff8100efb5>] do_softirq+0x65/0xa0 [ 754.095423] [<ffffffff810563fd>] irq_exit+0x8d/0x90 [ 754.095453] [<ffffffff8100ebc1>] do_IRQ+0x61/0xe0 [ 754.095482] [<ffffffff81351413>] ret_from_intr+0x0/0x15 [ 754.095513] <EOI> [ 754.095531] [<ffffffff81014375>] ? native_sched_clock+0x15/0x70 [ 754.096475] [<ffffffffa02bcfa6>] ? acpi_idle_enter_bm+0x24d/0x285 [processor] [ 754.096475] [<ffffffffa02bcf9f>] ? acpi_idle_enter_bm+0x246/0x285 [processor] [ 754.096475] [<ffffffff8127fab2>] cpuidle_idle_call+0x82/0x100 [ 754.096475] [<ffffffff8100a236>] cpu_idle+0xa6/0xf0 [ 754.096475] [<ffffffff81339bc1>] rest_init+0x91/0xa0 [ 754.096475] [<ffffffff814efccd>] start_kernel+0x3fd/0x408 [ 754.096475] [<ffffffff814ef347>] x86_64_start_reservations+0x132/0x136 [ 754.096475] [<ffffffff814ef451>] x86_64_start_kernel+0x106/0x115 [ 754.096475] RIP [<ffffffffa02eac49>] ath_tx_status+0x209/0x2f0 [ath9k] Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
armadefuego@gmail.com authored
On hardware busy the scan request pointer should be cleared, as higher levels will release. This avoids a crash when that pointer is erroneously used later. Signed-off-by: Joseph J. Gunn <armadefuego@yahoo.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Johannes Berg authored
Clearly a mistake, since pointers won't suddenly change their value... Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
- 21 Mar, 2011 11 commits
-
-
Felix Fietkau authored
This field is used to determine the inactivity time. When in AP mode, hostapd uses it for kicking out inactive clients after a while. Without this patch, hostapd immediately deauthenticates a new client if it checks the inactivity time before the client sends its first data frame. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Mohammed Shafi Shajakhan authored
Kernel panic occurs just after AR2427 establishes connection with AP. Unless aggregation is enabled we don't initialize the TID structure. Thus accesing the elements of the TID structure when aggregation is disabled, leads to NULL pointer dereferencing. [ 191.320358] Call Trace: [ 191.320364] [<fd250ea7>] ? ath9k_tx+0xa7/0x200 [ath9k] [ 191.320376] [<fd1ec7fc>] ? __ieee80211_tx+0x5c/0x1e0 [mac80211] [ 191.320386] [<fd1edd2b>] ? ieee80211_tx+0x7b/0x90 [mac80211] [ 191.320395] [<fd1edddd>] ? ieee80211_xmit+0x9d/0x1d0 [mac80211] [ 191.320401] [<c014218f>] ? wake_up_state+0xf/0x20 [ 191.320405] [<c015dbc8>] ? signal_wake_up+0x28/0x40 [ 191.320410] [<c012a578>] ? default_spin_lock_flags+0x8/0x10 [ 191.320420] [<fd1ee308>] ? ieee80211_subif_start_xmit+0x2e8/0x7c0 [mac80211] [ 191.320425] [<c058f905>] ? do_page_fault+0x295/0x3a0 [ 191.320431] [<c04c4a3d>] ? dev_hard_start_xmit+0x1ad/0x210 [ 191.320436] [<c04d96b5>] ? sch_direct_xmit+0x105/0x170 [ 191.320445] [<fd1f161a>] ? get_sta_flags+0x2a/0x40 [mac80211] [ 191.320449] [<c04c780f>] ? dev_queue_xmit+0x37f/0x4b0 [ 191.320452] [<c04d75b0>] ? eth_header+0x0/0xb0 [ 191.320456] [<c04cc479>] ? neigh_resolve_output+0xe9/0x310 [ 191.320461] [<c053d295>] ? ip6_output_finish+0xa5/0x110 [ 191.320464] [<c053e354>] ? ip6_output2+0x134/0x250 [ 191.320468] [<c053f7dd>] ? ip6_output+0x6d/0x100 [ 191.320471] [<c0559665>] ? mld_sendpack+0x395/0x3e0 [ 191.320475] [<c0557f81>] ? add_grhead+0x31/0xa0 [ 191.320478] [<c055a83c>] ? mld_send_cr+0x1bc/0x2b0 [ 191.320482] [<c01535d9>] ? irq_exit+0x39/0x70 [ 191.320485] [<c055a940>] ? mld_ifc_timer_expire+0x10/0x40 [ 191.320489] [<c015b92e>] ? run_timer_softirq+0x13e/0x2c0 [ 191.320493] [<c0103a30>] ? common_interrupt+0x30/0x40 [ 191.320498] [<c055a930>] ? mld_ifc_timer_expire+0x0/0x40 [ 191.320502] [<c0153358>] ? __do_softirq+0x98/0x1b0 [ 191.320506] [<c01534b5>] ? do_softirq+0x45/0x50 [ 191.320509] [<c0153605>] ? irq_exit+0x65/0x70 [ 191.320513] [<c05917dc>] ? smp_apic_timer_interrupt+0x5c/0x8b [ 191.320516] [<c0103df1>] ? apic_timer_interrupt+0x31/0x40 [ 191.320521] [<c016007b>] ? k_getrusage+0x12b/0x2f0 [ 191.320525] [<c039e384>] ? acpi_idle_enter_simple+0x117/0x148 [ 191.320529] [<c04a20da>] ? cpuidle_idle_call+0x7a/0x100 [ 191.320532] [<c01021d4>] ? cpu_idle+0x94/0xd0 [ 191.320536] [<c057ab88>] ? rest_init+0x58/0x60 [ 191.320541] [<c07a58ec>] ? start_kernel+0x351/0x357 [ 191.320544] [<c07a53c7>] ? unknown_bootoption+0x0/0x19e [ 191.320548] [<c07a50aa>] ? i386_start_kernel+0xaa/0xb1 [ 191.320550] Code: 03 66 3d 00 03 0f 84 7c 02 00 00 83 c3 18 0f b6 03 8b 4d e0 89 c3 83 e3 0f 6b c3 48 89 5d d8 8d 04 06 8d 50 0c 89 55 d0 8b 40 20 <8b> 00 3b 01 0f 85 8e 02 00 00 f6 47 20 40 0f 84 29 ff ff ff 8b [ 191.320634] EIP: [<fd2586d4>] ath_tx_start+0x474/0x770 [ath9k] SS:ESP 0068:c0761a90 [ 191.320642] CR2: 0000000000000000 [ 191.320647] ---[ end trace 9296ef23b9076ece ]--- [ 191.320650] Kernel panic - not syncing: Fatal exception in interrupt Cc: stable@kernel.org Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Randy Dunlap authored
Fix many of each of these warnings: Warning(include/net/cfg80211.h:519): No description found for parameter 'rxrate' Warning(include/net/mac80211.h:1163): bad line: Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Ilia Mirkin authored
These were found using the following semantic match: // <smpl> @@expression E1; type T;@@ * memset(E1, ... * sizeof(T) * ..., ...); // </smpl> Also take this opportunity to remove the unnecessary void* casts. Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu> Tested-by: Larry Finger <Larry.Finger@lwfinger.net> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Peter Lemenkov authored
Add unknown Toshiba device, mentioned in rt3572sta sources, under CONFIG_RT2800USB_UNKNOWN Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Peter Lemenkov authored
Add 2L Central Europe BV 8070 under CONFIG_RT2800USB_UNKNOWN Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Peter Lemenkov authored
Add Planex Communications, Inc. RT8070 under CONFIG_RT2800USB_UNKNOWN Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Peter Lemenkov authored
Add ID for Asus USB-N11 Wi-FI adapter. Tested by me. Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Joe Gunn authored
Removing an entry from the scan_list should be performed while holding the lock. Signed-off-by: Joseph J. Gunn <armadefuego@yahoo.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Dan Carpenter authored
We should unlock here instead of returning -EINVAL directly. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Tõnu Samuel authored
Signed-off-by: Tõnu Samuel <tonu@jes.ee> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
- 20 Mar, 2011 7 commits
-
-
-
-
Vasiliy Kulikov authored
'buffer' string is copied from userspace. It is not checked whether it is zero terminated. This may lead to overflow inside of simple_strtoul(). Changli Gao suggested to copy not more than user supplied 'size' bytes. It was introduced before the git epoch. Files "ipt_CLUSTERIP/*" are root writable only by default, however, on some setups permissions might be relaxed to e.g. network admin user. Signed-off-by: Vasiliy Kulikov <segoon@openwall.com> Acked-by: Changli Gao <xiaosuo@gmail.com> Signed-off-by: Patrick McHardy <kaber@trash.net>
-
Eric Dumazet authored
commit f3c5c1bf (make ip_tables reentrant) introduced a race in handling the stackptr restore, at the end of ipt_do_table() We should do it before the call to xt_info_rdunlock_bh(), or we allow cpu preemption and another cpu overwrites stackptr of original one. A second fix is to change the underflow test to check the origptr value instead of 0 to detect underflow, or else we allow a jump from different hooks. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Jan Engelhardt <jengelh@medozas.de> Signed-off-by: Patrick McHardy <kaber@trash.net>
-
Jozsef Kadlecsik authored
The revision of the set type was not checked at the create command: if the userspace sent a valid set type but with not supported revision number, it'd create a loop. Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by: Patrick McHardy <kaber@trash.net>
-
Jozsef Kadlecsik authored
The hash:*port* types with IPv4 silently ignored when address ranges with non TCP/UDP were added/deleted from the set and used the first address from the range only. Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by: Patrick McHardy <kaber@trash.net>
-
David S. Miller authored
When the OF device driver bits were converted over to the platform device infrastructure in commit 74888760 ("dt/net: Eliminate users of of_platform_{,un}register_driver") we inadvertantly created probing problems in the OF case. The NIU driver creates a dummy platform device to represent the board that contains one or more child NIU devices. Unfortunately we use the same name, "niu", as the OF device driver itself uses. The result is that we try to probe the dummy "niu" parent device we create, and since it has a NULL ofdevice pointer etc. everything explodes: [783019.128243] niu: niu.c:v1.1 (Apr 22, 2010) [783019.128810] Unable to handle kernel NULL pointer dereference [783019.128949] tsk->{mm,active_mm}->context = 000000000000039e [783019.129078] tsk->{mm,active_mm}->pgd = fffff803afc5a000 [783019.129206] \|/ ____ \|/ [783019.129213] "@'/ .. \`@" [783019.129220] /_| \__/ |_\ [783019.129226] \__U_/ [783019.129378] modprobe(2004): Oops [#1] [783019.129423] TSTATE: 0000000011001602 TPC: 0000000010052ff8 TNPC: 000000000061bbb4 Y: 00000000 Not tainted [783019.129542] TPC: <niu_of_probe+0x3c/0x2dc [niu]> [783019.129624] g0: 8080000000000000 g1: 0000000000000000 g2: 0000000010056000 g3: 0000000000000002 [783019.129733] g4: fffff803fc1da0c0 g5: fffff800441e2000 g6: fffff803fba84000 g7: 0000000000000000 [783019.129842] o0: fffff803fe7df010 o1: 0000000010055700 o2: 0000000000000000 o3: fffff803fbacaca0 [783019.129951] o4: 0000000000000080 o5: 0000000000777908 sp: fffff803fba866e1 ret_pc: 0000000010052ff4 [783019.130083] RPC: <niu_of_probe+0x38/0x2dc [niu]> [783019.130165] l0: fffff803fe7df010 l1: fffff803fbacafc0 l2: fffff803fbacaca0 l3: ffffffffffffffed [783019.130273] l4: 0000000000000000 l5: 000000007fffffff l6: fffff803fba86f40 l7: 0000000000000001 [783019.130382] i0: fffff803fe7df000 i1: fffff803fc20aba0 i2: 0000000000000000 i3: 0000000000000001 [783019.130490] i4: 0000000000000000 i5: 0000000000000000 i6: fffff803fba867a1 i7: 000000000062038c [783019.130614] I7: <platform_drv_probe+0xc/0x20> Fix by simply renaming the parent device to "niu-board". Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 19 Mar, 2011 2 commits
-
-
Eric Dumazet authored
commit 54405cde (r8169: support control of advertising.) introduced a bug in rtl8169_init_phy() Reported-by: Piotr Hosowicz <piotr@hosowicz.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Oliver Neukum <oliver@neukum.org> Cc: Francois Romieu <romieu@fr.zoreil.com> Tested-by: Anca Emanuel <anca.emanuel@gmail.com> Tested-by: Piotr Hosowicz <piotr@hosowicz.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Nicolas de Pesloüan authored
Signed-off-by: Nicolas de Pesloüan <nicolas.2p.debian@free.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
-