[Why]
For some monitors extreme flickering can occur while using LFC for if
we're not doing the DRR timing update for V_TOTAL_MIN / V_TOTAL_MAX at
the DP start of frame.

Hardware can default to any time in the frame which isn't the behavior
we want.

[How]
Add a new function for setting the double buffering mode for DRR timing.

Default to DP start of frame double buffering on timing generator init.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
P010 pixel format is not declared as supported in DRM and DM.

[How]
Add P010 format to the support list presented to DRM and checked in DM
Signed-off-by: Stylon Wang <stylon.wang@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
Diagnostics scaling test failing to set required number of vertical taps
in 4:2:0 surface case

[How]
In dpp3_get_optimal_number_of_taps() need to use LB_MEMORY_CONFIG_3 for
4:2:0 surface case. In resource_build_scaling_params() make sure to also
set plane res alpha enable based on updated surface state
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

the HPD bo size calculation error.
the "mem.size" can't present actual BO size all time.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <Christian.Koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

A bit smaller this time around.. there are still a couple uabi
additions for vulkan waiting in the wings, but I punted on them this
cycle due to running low on time.  (They should be easy enough to
rebase, and if it is a problem for anyone I can push a next+uabi
branch so that tu work can proceed.)

The bigger change is refactoring dpu resource manager and moving dpu
to use atomic global state.  Other than that, it is mostly cleanups
and fixes.

From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ <CAF6AEGuf1R4Xz-t9Z7_cwx9jD=b4wUvvwfqA5cHR8fCSXSd5XQ@mail.gmail.com
Signed-off-by: Dave Airlie <airlied@redhat.com>

msm needed rc6, so I just went and merged release
(msm has been in drm-next outside of this tree)
Signed-off-by: Dave Airlie <airlied@redhat.com>

Merge tag 'drm-intel-next-fixes-2020-03-27' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

Fixes for instability on Baytrail and Haswell;
Ice Lake RPS; Sandy Bridge RC6; and few others around
GT hangchec/reset; livelock; and a null dereference.
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200327081607.GA3082710@intel.com

amd-drm-next-5.7-2020-03-26:

amdgpu:
- Remove a dpm quirk that is not necessary
- Fix handling of AC/DC mode in newer SMU firmwares on navi
- SR-IOV fixes
- RAS fixes

scheduler:
- Fix a race condition

radeon:
- Remove a dpm quirk that is not necessary
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200326155310.5486-1-alexander.deucher@amd.com

Merge vm fixes from Andrew Morton:
 "5 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  mm/sparse: fix kernel crash with pfn_section_valid check
  mm: fork: fix kernel_stack memcg stats for various stack implementations
  hugetlb_cgroup: fix illegal access to memory
  drivers/base/memory.c: indicate all memory blocks as removable
  mm/swapfile.c: move inode_lock out of claim_swapfile

Pull timer fix from Thomas Gleixner:
 "A single fix for the Hyper-V clocksource driver to make sched clock
  actually return nanoseconds and not the virtual clock value which
  increments at 10e7 HZ (100ns)"

* tag 'timers-urgent-2020-03-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  clocksource/drivers/hyper-v: Make sched clock return nanoseconds correctly

Pull irq fix from Thomas Gleixner:
 "A single bugfix to prevent reference leaks in irq affinity notifiers"

* tag 'irq-urgent-2020-03-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  genirq: Fix reference leaks on irq affinity notifiers

Fix the crash like this:

    BUG: Kernel NULL pointer dereference on read at 0x00000000
    Faulting instruction address: 0xc000000000c3447c
    Oops: Kernel access of bad area, sig: 11 [#1]
    LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
    CPU: 11 PID: 7519 Comm: lt-ndctl Not tainted 5.6.0-rc7-autotest #1
    ...
    NIP [c000000000c3447c] vmemmap_populated+0x98/0xc0
    LR [c000000000088354] vmemmap_free+0x144/0x320
    Call Trace:
       section_deactivate+0x220/0x240
       __remove_pages+0x118/0x170
       arch_remove_memory+0x3c/0x150
       memunmap_pages+0x1cc/0x2f0
       devm_action_release+0x30/0x50
       release_nodes+0x2f8/0x3e0
       device_release_driver_internal+0x168/0x270
       unbind_store+0x130/0x170
       drv_attr_store+0x44/0x60
       sysfs_kf_write+0x68/0x80
       kernfs_fop_write+0x100/0x290
       __vfs_write+0x3c/0x70
       vfs_write+0xcc/0x240
       ksys_write+0x7c/0x140
       system_call+0x5c/0x68

The crash is due to NULL dereference at

	test_bit(idx, ms->usage->subsection_map);

due to ms->usage = NULL in pfn_section_valid()

With commit d41e2f3b ("mm/hotplug: fix hot remove failure in
SPARSEMEM|!VMEMMAP case") section_mem_map is set to NULL after
depopulate_section_mem().  This was done so that pfn_page() can work
correctly with kernel config that disables SPARSEMEM_VMEMMAP.  With that
config pfn_to_page does

	__section_mem_map_addr(__sec) + __pfn;

where

  static inline struct page *__section_mem_map_addr(struct mem_section *section)
  {
	unsigned long map = section->section_mem_map;
	map &= SECTION_MAP_MASK;
	return (struct page *)map;
  }

Now with SPASEMEM_VMEMAP enabled, mem_section->usage->subsection_map is
used to check the pfn validity (pfn_valid()).  Since section_deactivate
release mem_section->usage if a section is fully deactivated,
pfn_valid() check after a subsection_deactivate cause a kernel crash.

  static inline int pfn_valid(unsigned long pfn)
  {
  ...
	return early_section(ms) || pfn_section_valid(ms, pfn);
  }

where

  static inline int pfn_section_valid(struct mem_section *ms, unsigned long pfn)
  {
	int idx = subsection_map_index(pfn);

	return test_bit(idx, ms->usage->subsection_map);
  }

Avoid this by clearing SECTION_HAS_MEM_MAP when mem_section->usage is
freed.  For architectures like ppc64 where large pages are used for
vmmemap mapping (16MB), a specific vmemmap mapping can cover multiple
sections.  Hence before a vmemmap mapping page can be freed, the kernel
needs to make sure there are no valid sections within that mapping.
Clearing the section valid bit before depopulate_section_memap enables
this.

[aneesh.kumar@linux.ibm.com: add comment]
  Link: http://lkml.kernel.org/r/20200326133235.343616-1-aneesh.kumar@linux.ibm.comLink: http://lkml.kernel.org/r/20200325031914.107660-1-aneesh.kumar@linux.ibm.com
Fixes: d41e2f3b ("mm/hotplug: fix hot remove failure in SPARSEMEM|!VMEMMAP case")
Reported-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Reviewed-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Depending on CONFIG_VMAP_STACK and the THREAD_SIZE / PAGE_SIZE ratio the
space for task stacks can be allocated using __vmalloc_node_range(),
alloc_pages_node() and kmem_cache_alloc_node().

In the first and the second cases page->mem_cgroup pointer is set, but
in the third it's not: memcg membership of a slab page should be
determined using the memcg_from_slab_page() function, which looks at
page->slab_cache->memcg_params.memcg .  In this case, using
mod_memcg_page_state() (as in account_kernel_stack()) is incorrect:
page->mem_cgroup pointer is NULL even for pages charged to a non-root
memory cgroup.

It can lead to kernel_stack per-memcg counters permanently showing 0 on
some architectures (depending on the configuration).

In order to fix it, let's introduce a mod_memcg_obj_state() helper,
which takes a pointer to a kernel object as a first argument, uses
mem_cgroup_from_obj() to get a RCU-protected memcg pointer and calls
mod_memcg_state().  It allows to handle all possible configurations
(CONFIG_VMAP_STACK and various THREAD_SIZE/PAGE_SIZE values) without
spilling any memcg/kmem specifics into fork.c .

Note: This is a special version of the patch created for stable
backports.  It contains code from the following two patches:
  - mm: memcg/slab: introduce mem_cgroup_from_obj()
  - mm: fork: fix kernel_stack memcg stats for various stack implementations

[guro@fb.com: introduce mem_cgroup_from_obj()]
  Link: http://lkml.kernel.org/r/20200324004221.GA36662@carbon.dhcp.thefacebook.com
Fixes: 4d96ba35 ("mm: memcg/slab: stop setting page->mem_cgroup pointer for slab pages")
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Bharata B Rao <bharata@linux.ibm.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200303233550.251375-1-guro@fb.comSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This appears to be a mistake in commit faced7e0 ("mm: hugetlb
controller for cgroups v2").

Essentially that commit does a hugetlb_cgroup_from_counter assuming that
page_counter_try_charge has initialized counter.

But if that has failed then it seems will not initialize counter, so
hugetlb_cgroup_from_counter(counter) ends up pointing to random memory,
causing kasan to complain.

The solution is to simply use 'h_cg', instead of
hugetlb_cgroup_from_counter(counter), since that is a reference to the
hugetlb_cgroup anyway.  After this change kasan ceases to complain.

Fixes: faced7e0 ("mm: hugetlb controller for cgroups v2")
Reported-by: syzbot+cac0c4e204952cf449b1@syzkaller.appspotmail.com
Signed-off-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Giuseppe Scrivano <gscrivan@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: David Rientjes <rientjes@google.com>
Link: http://lkml.kernel.org/r/20200313223920.124230-1-almasrymina@google.comSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

We see multiple issues with the implementation/interface to compute
whether a memory block can be offlined (exposed via
/sys/devices/system/memory/memoryX/removable) and would like to simplify
it (remove the implementation).

1. It runs basically lockless. While this might be good for performance,
   we see possible races with memory offlining that will require at
   least some sort of locking to fix.

2. Nowadays, more false positives are possible. No arch-specific checks
   are performed that validate if memory offlining will not be denied
   right away (and such check will require locking). For example, arm64
   won't allow to offline any memory block that was added during boot -
   which will imply a very high error rate. Other archs have other
   constraints.

3. The interface is inherently racy. E.g., if a memory block is detected
   to be removable (and was not a false positive at that time), there is
   still no guarantee that offlining will actually succeed. So any
   caller already has to deal with false positives.

4. It is unclear which performance benefit this interface actually
   provides. The introducing commit 5c755e9f ("memory-hotplug: add
   sysfs removable attribute for hotplug memory remove") mentioned

	"A user-level agent must be able to identify which sections
	 of memory are likely to be removable before attempting the
	 potentially expensive operation."

   However, no actual performance comparison was included.

Known users:

 - lsmem: Will group memory blocks based on the "removable" property. [1]

 - chmem: Indirect user. It has a RANGE mode where one can specify
          removable ranges identified via lsmem to be offlined. However,
          it also has a "SIZE" mode, which allows a sysadmin to skip the
          manual "identify removable blocks" step. [2]

 - powerpc-utils: Uses the "removable" attribute to skip some memory
          blocks right away when trying to find some to offline+remove.
          However, with ballooning enabled, it already skips this
          information completely (because it once resulted in many false
          negatives). Therefore, the implementation can deal with false
          positives properly already. [3]

According to Nathan Fontenot, DLPAR on powerpc is nowadays no longer
driven from userspace via the drmgr command (powerpc-utils).  Nowadays
it's managed in the kernel - including onlining/offlining of memory
blocks - triggered by drmgr writing to /sys/kernel/dlpar.  So the
affected legacy userspace handling is only active on old kernels.  Only
very old versions of drmgr on a new kernel (unlikely) might execute
slower - totally acceptable.

With CONFIG_MEMORY_HOTREMOVE, always indicating "removable" should not
break any user space tool.  We implement a very bad heuristic now.
Without CONFIG_MEMORY_HOTREMOVE we cannot offline anything, so report
"not removable" as before.

Original discussion can be found in [4] ("[PATCH RFC v1] mm:
is_mem_section_removable() overhaul").

Other users of is_mem_section_removable() will be removed next, so that
we can remove is_mem_section_removable() completely.

[1] http://man7.org/linux/man-pages/man1/lsmem.1.html
[2] http://man7.org/linux/man-pages/man8/chmem.8.html
[3] https://github.com/ibm-power-utilities/powerpc-utils
[4] https://lkml.kernel.org/r/20200117105759.27905-1-david@redhat.com

Also, this patch probably fixes a crash reported by Steve.
http://lkml.kernel.org/r/CAPcyv4jpdaNvJ67SkjyUJLBnBnXXQv686BiVW042g03FUmWLXw@mail.gmail.comReported-by: "Scargall, Steve" <steve.scargall@intel.com>
Suggested-by: Michal Hocko <mhocko@kernel.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Nathan Fontenot <ndfont@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Badari Pulavarty <pbadari@us.ibm.com>
Cc: Robert Jennings <rcj@linux.vnet.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Karel Zak <kzak@redhat.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200128093542.6908-1-david@redhat.comSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

claim_swapfile() currently keeps the inode locked when it is successful,
or the file is already swapfile (with -EBUSY).  And, on the other error
cases, it does not lock the inode.

This inconsistency of the lock state and return value is quite confusing
and actually causing a bad unlock balance as below in the "bad_swap"
section of __do_sys_swapon().

This commit fixes this issue by moving the inode_lock() and IS_SWAPFILE
check out of claim_swapfile().  The inode is unlocked in
"bad_swap_unlock_inode" section, so that the inode is ensured to be
unlocked at "bad_swap".  Thus, error handling codes after the locking now
jumps to "bad_swap_unlock_inode" instead of "bad_swap".

    =====================================
    WARNING: bad unlock balance detected!
    5.5.0-rc7+ #176 Not tainted
    -------------------------------------
    swapon/4294 is trying to release lock (&sb->s_type->i_mutex_key) at: __do_sys_swapon+0x94b/0x3550
    but there are no more locks to release!

    other info that might help us debug this:
    no locks held by swapon/4294.

    stack backtrace:
    CPU: 5 PID: 4294 Comm: swapon Not tainted 5.5.0-rc7-BTRFS-ZNS+ #176
    Hardware name: ASUS All Series/H87-PRO, BIOS 2102 07/29/2014
    Call Trace:
     dump_stack+0xa1/0xea
     print_unlock_imbalance_bug.cold+0x114/0x123
     lock_release+0x562/0xed0
     up_write+0x2d/0x490
     __do_sys_swapon+0x94b/0x3550
     __x64_sys_swapon+0x54/0x80
     do_syscall_64+0xa4/0x4b0
     entry_SYSCALL_64_after_hwframe+0x49/0xbe
    RIP: 0033:0x7f15da0a0dc7

Fixes: 1638045c ("mm: set S_SWAPFILE on blockdev swap devices")
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Qais Youef <qais.yousef@arm.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200206090132.154869-1-naohiro.aota@wdc.comSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull networking fixes from David Miller:

 1) Fix memory leak in vti6, from Torsten Hilbrich.

 2) Fix double free in xfrm_policy_timer, from YueHaibing.

 3) NL80211_ATTR_CHANNEL_WIDTH attribute is put with wrong type, from
    Johannes Berg.

 4) Wrong allocation failure check in qlcnic driver, from Xu Wang.

 5) Get ks8851-ml IO operations right, for real this time, from Marek
    Vasut.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (22 commits)
  r8169: fix PHY driver check on platforms w/o module softdeps
  net: ks8851-ml: Fix IO operations, again
  mlxsw: spectrum_mr: Fix list iteration in error path
  qlcnic: Fix bad kzalloc null test
  mac80211: set IEEE80211_TX_CTRL_PORT_CTRL_PROTO for nl80211 TX
  mac80211: mark station unauthorized before key removal
  mac80211: Check port authorization in the ieee80211_tx_dequeue() case
  cfg80211: Do not warn on same channel at the end of CSA
  mac80211: drop data frames without key on encrypted links
  ieee80211: fix HE SPR size calculation
  nl80211: fix NL80211_ATTR_CHANNEL_WIDTH attribute type
  xfrm: policy: Fix doulbe free in xfrm_policy_timer
  bpf: Explicitly memset some bpf info structures declared on the stack
  bpf: Explicitly memset the bpf_attr structure
  bpf: Sanitize the bpf_struct_ops tcp-cc name
  vti6: Fix memory leak of skb if input policy check fails
  esp: remove the skb from the chain when it's enqueued in cryptd_wq
  ipv6: xfrm6_tunnel.c: Use built-in RCU list checking
  xfrm: add the missing verify_sec_ctx_len check in xfrm_add_acquire
  xfrm: fix uctx len check in verify_sec_ctx_len
  ...

Pull i2c fixes from Wolfram Sang:
 "Three more driver bugfixes, and two doc improvements fixing build
  warnings while we are here"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: pca-platform: Use platform_irq_get_optional
  i2c: st: fix missing struct parameter description
  i2c: nvidia-gpu: Handle timeout correctly in gpu_i2c_check_status()
  i2c: fix a doc warning
  i2c: hix5hd2: add missed clk_disable_unprepare in remove

Pull SCSI fixes from James Bottomley:
 "Two small fixes: one in drivers (qla2xxx), and one in the core (sd) to
  try to cope with USB enclosures that silently change reported
  parameters"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: sd: Fix optimal I/O size for devices that change reported values
  scsi: qla2xxx: Fix I/Os being passed down when FC device is being deleted

The interrupt is not required so use platform_irq_get_optional() to
avoid error messages like

  i2c-pca-platform 22080000.i2c: IRQ index 0 not found
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

Fix a missing struct parameter description to allow
warning free W=1 compilation.
Signed-off-by: Alain Volmat <avolmat@me.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

Daniel Borkmann says:

====================
pull-request: bpf 2020-03-27

The following pull-request contains BPF updates for your *net* tree.

We've added 3 non-merge commits during the last 4 day(s) which contain
a total of 4 files changed, 25 insertions(+), 20 deletions(-).

The main changes are:

1) Explicitly memset the bpf_attr structure on bpf() syscall to avoid
   having to rely on compiler to do so. Issues have been noticed on
   some compilers with padding and other oddities where the request was
   then unexpectedly rejected, from Greg Kroah-Hartman.

2) Sanitize the bpf_struct_ops TCP congestion control name in order to
   avoid problematic characters such as whitespaces, from Martin KaFai Lau.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

On Android/x86 the module loading infrastructure can't deal with
softdeps. Therefore the check for presence of the Realtek PHY driver
module fails. mdiobus_register() will try to load the PHY driver
module, therefore move the check to after this call and explicitly
check that a dedicated PHY driver is bound to the PHY device.

Fixes: f3259377 ("r8169: check that Realtek PHY driver module is loaded")
Reported-by: Chih-Wei Huang <cwhuang@android-x86.org>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Steffen Klassert says:

====================
pull request (net): ipsec 2020-03-27

1) Handle NETDEV_UNREGISTER for xfrm device to handle asynchronous
   unregister events cleanly. From Raed Salem.

2) Fix vti6 tunnel inter address family TX through bpf_redirect().
   From Nicolas Dichtel.

3) Fix lenght check in verify_sec_ctx_len() to avoid a
   slab-out-of-bounds. From Xin Long.

4) Add a missing verify_sec_ctx_len check in xfrm_add_acquire
   to avoid a possible out-of-bounds to access. From Xin Long.

5) Use built-in RCU list checking of hlist_for_each_entry_rcu
   to silence false lockdep warning in __xfrm6_tunnel_spi_lookup
   when CONFIG_PROVE_RCU_LIST is enabled. From Madhuparna Bhowmik.

6) Fix a panic on esp offload when crypto is done asynchronously.
   From Xin Long.

7) Fix a skb memory leak in an error path of vti6_rcv.
   From Torsten Hilbrich.

8) Fix a race that can lead to a doulbe free in xfrm_policy_timer.
   From Xin Long.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull parsic fix from Helge Deller:
 "Fix a recursive loop when running 'make ARCH=parisc defconfig'"

* 'parisc-5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Fix defconfig selection

Pull ARM DT and driver fixes from Arnd Bergmann:
 "For the devicetree files, there are a total of 20 patches, almost
  entirely for 32-bit machines:

   - The Allwinner/sun9i r40 SoC dtsi file contains a number of issues,
     both for correctness and for style that are addressed in separate
     patches. This causes most of the changed lines of the DT updates
     this time.

   - More Allwinner updates fixing the identification of the security
     system on sun8i/A33, a recent regression of the A83t ethernet, and
     a few board specific issues on the TBS-A711 macine.

   - Several bug fixes for OMAP dts files, most notably fixing the
     timings for the NAND flash on the Nokia N900 that regressed a while
     ago after the move to configuring them from DT. Some other OMAPs
     now set the correct dma limits on the L3 bus, and a regression fix
     addresses lost Ethernet on dm814x

   - One incorrect setting in the newly added Raspberry Pi Zero W that
     may cause issues with the SD card controller.

   - A missing property on the bcm2835 firmware node caused incorrect
     DMA settings.

   - An old bug on the oxnas platform causing spurious interrupts is
     finally addressed.

   - A regression on the Exynos Midas board broke the OLED panel power
     supply.

   - The i.MX6 phycore SoM specified the wrong voltage for the SoC, this
     is now set to the values from the datasheet.

   - Some 64-bit machines use a deprecated string to identify the PSCI
     firmware.

  There are also several small code fixes addressing mostly serious
  issues:

   - Fix the sunxi rsb bus access to no longer return incorrect data
     when mixing 8 and 16 bit I/O.

   - Fix a suspend/resume regression on the OMAP2+ lcdc from a missing
     quirk in the ti-sysc driver

   - Fix a NULL pointer access from a race in the fsl dpio driver

   - Fix a v5.5 regression in the exynos-chipid driver that caused an
     invalid error code probing the device on non-exynos platforms

   - Fix an out-of-bounds access in the AMD TEE driver"

* tag 'arm-soc-fixes-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (24 commits)
  soc: samsung: chipid: Fix return value on non-Exynos platforms
  arm64: dts: Fix leftover entry-methods for PSCI
  ARM: dts: exynos: Fix regulator node aliasing on Midas-based boards
  ARM: dts: oxnas: Fix clear-mask property
  ARM: dts: bcm283x: Fix vc4's firmware bus DMA limitations
  ARM: dts: omap5: Add bus_dma_limit for L3 bus
  ARM: dts: omap4-droid4: Fix lost touchscreen interrupts
  ARM: dts: dra7: Add bus_dma_limit for L3 bus
  ARM: bcm2835-rpi-zero-w: Add missing pinctrl name
  ARM: dts: sun8i: a33: add the new SS compatible
  dt-bindings: crypto: add new compatible for A33 SS
  ARM: dts: sun8i: r40: Move SPI device nodes based on address order
  ARM: dts: sun8i: r40: Fix register base address for SPI2 and SPI3
  ARM: dts: sun8i: r40: Move AHCI device node based on address order
  ARM: dts: imx6: phycore-som: fix arm and soc minimum voltage
  soc: fsl: dpio: register dpio irq handlers after dpio create
  tee: amdtee: out of bounds read in find_session()
  ARM: dts: N900: fix onenand timings
  bus: ti-sysc: Fix quirk flags for lcdc on am335x
  ARM: dts: Fix dm814x Ethernet by changing to use rgmii-id mode
  ...

Pull RISC-V fixes from Palmer Dabbelt:
 "Sorry for the last minute patches, but a few things fell through the
  cracks recently. I was on the fence about sending a late pull request
  just for the M-mode fixes, as we don't really have any users, but the
  last patch fixes the build for Fedora which I consider pretty
  important.

  Given that the M-mode fixes should be very low risk, I figured it's
  worth sending them along as well.

  Thhis passes my standard 'boot in QEMU' test"

* tag 'riscv-for-linus-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  RISC-V: Move all address space definition macros to one place
  RISC-V: Only select essential drivers for SOC_VIRT config
  riscv: fix the IPI missing issue in nommu mode
  riscv: uaccess should be used in nommu mode

Pull Devicetree fix from Rob Herring:
 "A single fix for building dtc with GCC 10"

* tag 'devicetree-fixes-for-5.6-4' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  scripts/dtc: Remove redundant YYLOC global declaration

Pull arm64 fix from Will Deacon:
 "Fix defconfig build when using Clang's integrated assembler"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: alternative: fix build with clang integrated assembler

Pull clk fixes from Stephen Boyd:
 "A handful of clk driver fixes.

  Mostly they're around the i.MX drivers fixing the parents of a few
  clks and making KASAN happy with how the message passing code works.

  Besides that we have a TI driver fix for the RTC parent and a fix for
  the basic gate type registration functions introduced this release
  where they didn't actually pass the arguments in the right places to
  the multiplexer function down below"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: imx: Align imx sc clock parent msg structs to 4
  clk: imx: Align imx sc clock msg structs to 4
  clk: Pass correct arguments to __clk_hw_register_gate()
  clk: ti: am43xx: Fix clock parent for RTC clock
  clk: imx8mp: Correct the enet_qos parent clock
  clk: imx8mp: Correct IMX8MP_CLK_HDMI_AXI clock parent

Pull drm fixes from Dave Airlie:
 "Pretty quiet: some minor sg mapping fixes for 3 drivers, and a single
  oops fix for the scheduler. I'm hoping nobody tries to send me a fixes
  pull today but I'll keep an eye out of the weekend.

  radeon/amdgpu/dma-buf:
   - sg list fixes

  scheduler:
   - oops fix"

* tag 'drm-fixes-2020-03-27' of git://anongit.freedesktop.org/drm/drm:
  drm/scheduler: fix rare NULL ptr race
  drm/radeon: fix scatter-gather mapping with user pages
  drm/amdgpu: fix scatter-gather mapping with user pages
  drm/prime: use dma length macro when mapping sg

Fix the recursive loop when running "make ARCH=parisc defconfig".

Fixes: 84669923 ("parisc: Regenerate parisc defconfigs")
Noticed-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Helge Deller <deller@gmx.de>

gcc 10 will default to -fno-common, which causes this error at link
time:

  (.text+0x0): multiple definition of `yylloc'; dtc-lexer.lex.o (symbol from plugin):(.text+0x0): first defined here

This is because both dtc-lexer as well as dtc-parser define the same
global symbol yyloc. Before with -fcommon those were merged into one
defintion. The proper solution would be to to mark this as "extern",
however that leads to:

  dtc-lexer.l:26:16: error: redundant redeclaration of 'yylloc' [-Werror=redundant-decls]
   26 | extern YYLTYPE yylloc;
      |                ^~~~~~
In file included from dtc-lexer.l:24:
dtc-parser.tab.h:127:16: note: previous declaration of 'yylloc' was here
  127 | extern YYLTYPE yylloc;
      |                ^~~~~~
cc1: all warnings being treated as errors

which means the declaration is completely redundant and can just be
dropped.
Signed-off-by: Dirk Mueller <dmueller@suse.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
[robh: cherry-pick from upstream]
Cc: stable@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>

The sched clock read functions return the HV clock (100ns granularity)
without converting it to nanoseconds.

Add the missing conversion.

Fixes: bd00cd52 ("clocksource/drivers/hyperv: Add Hyper-V specific sched clock function")
Signed-off-by: Yubo Xie <yuboxie@microsoft.com>
Signed-off-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20200327021159.31429-1-Tianyu.Lan@microsoft.com

Pull input fixes from Dmitry Torokhov:

 - a fix to generate proper timestamps on key autorepeat events that
   were broken recently

 - a fix for Synaptics driver to only activate reduced reporting mode
   when explicitly requested

 - a new keycode for "selective screenshot" function

 - other assorted fixes

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: fix stale timestamp on key autorepeat events
  Input: move the new KEY_SELECTIVE_SCREENSHOT keycode
  Input: avoid BIT() macro usage in the serio.h UAPI header
  Input: synaptics-rmi4 - set reduced reporting mode only when requested
  Input: synaptics - enable RMI on HP Envy 13-ad105ng
  Input: allocate keycode for "Selective Screenshot" key
  Input: tm2-touchkey - add support for Coreriver TC360 variant
  dt-bindings: input: add Coreriver TC360 binding
  dt-bindings: vendor-prefixes: Add Coreriver vendor prefix
  Input: raydium_i2c_ts - fix error codes in raydium_i2c_boot_trigger()

This patch reverts 58292104 ("net: ks8851-ml: Fix 16-bit IO operation")
and edacb098 ("net: ks8851-ml: Fix 16-bit data access"), because it
turns out these were only necessary due to buggy hardware. This patch adds
a check for such a buggy hardware to prevent any such mistakes again.

While working further on the KS8851 driver, it came to light that the
KS8851-16MLL is capable of switching bus endianness by a hardware strap,
EESK pin. If this strap is incorrect, the IO accesses require such endian
swapping as is being reverted by this patch. Such swapping also impacts
the performance significantly.

Hence, in addition to removing it, detect that the hardware is broken,
report to user, and fail to bind with such hardware.

Fixes: 58292104 ("net: ks8851-ml: Fix 16-bit IO operation")
Fixes: edacb098 ("net: ks8851-ml: Fix 16-bit data access")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: David S. Miller <davem@davemloft.net>
Cc: Lukas Wunner <lukas@wunner.de>
Cc: Petr Stetiar <ynezz@true.cz>
Cc: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'amd-drm-fixes-5.6-2020-03-26' of git://people.freedesktop.org/~agd5f/linux into drm-fixes

amd-drm-fixes-5.6-2020-03-26:

Scheduler:
- Fix a race condition that could result in a segfault
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200326144538.3937-1-alexander.deucher@amd.com

drm-misc-fixes for v5.6:
- SG fixes for prime, radeon and amdgpu.
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ef10e822-76dd-125d-ec1f-9a78c5f76bc3@linux.intel.com

We get the following compilation error if CONFIG_SPARSEMEM_VMEMMAP is set.

---------------------------------------------------------------
./arch/riscv/include/asm/pgtable-64.h: In function ‘pud_page’:
./include/asm-generic/memory_model.h:54:29: error: ‘vmemmap’ undeclared
(first use in this function); did you mean ‘mem_map’?
 #define __pfn_to_page(pfn) (vmemmap + (pfn))
                             ^~~~~~~
./include/asm-generic/memory_model.h:82:21: note: in expansion of
macro ‘__pfn_to_page’

 #define pfn_to_page __pfn_to_page
                     ^~~~~~~~~~~~~
./arch/riscv/include/asm/pgtable-64.h:70:9: note: in expansion of macro
‘pfn_to_page’
  return pfn_to_page(pud_val(pud) >> _PAGE_PFN_SHIFT);
---------------------------------------------------------------

Fix the compliation errors by moving all the address space definition
macros before including pgtable-64.h.

Fixes: 8ad8b727 (riscv: Add KASAN support)
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>