- 07 Aug, 2018 3 commits
-
-
Jacob Keller authored
Many of the ethtool statistics use the same basic logic for copying strings into the supplied buffer. A set of stats are stored in a const array of i40e_stats structures, and we apply these all together. Simplify the stats code by introducing a helper function which can take a stats array and copy the strings into the buffer, updating the buffer pointer as we go. We use a macro to implement i40e_add_stat_strings so that ARRAY_SIZE can be used on the array passed in. This ensures that we always use the matching size in __i40e_add_stat_strings. More complex stats currently do not use i40e_stats arrays, usually due to custom formatted strings, or because the stats are not laid out in the expected way. These stats will be updated to use the helper function in separate future patches. Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
YueHaibing authored
There are no in-tree callers. Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Tested-by:
-
Sergey Nemov authored
Function call to i40e_prep_for_reset() is duplicated in i40e_shutdown routine and gets called before i40e_enable_mc_magic_wake() which blocks it from being executed correctly on system reboot or shutdown because adminq is already disabled by first i40e_prep_for_reset() call. Two register write calls are also duplicated. Signed-off-by:
Sergey Nemov <sergey.nemov@intel.com> Tested-by:
-
- 06 Aug, 2018 37 commits
-
-
David S. Miller authored
Merge branch 'ieee802154-for-davem-2018-08-06' of git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan-next Stefan Schmidt says: ==================== pull-request: ieee802154-next 2018-08-06 An update from ieee802154 for *net-next* Romuald added a socket option to get the LQI value of the received datagram. Alexander added a new hardware simulation driver modelled after hwsim of the wireless people. It allows runtime configuration for new nodes and edges over a netlink interface (a config utlity is making its way into wpan-tools). We also have three fixes in here. One from Colin which is more of a cleanup and two from Alex fixing tailroom and single frame space problems. I would normally put the last two into my fixes tree, but given we are already in -rc8 I simply put them here and added a cc: stable to them. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Dan Carpenter authored
We accidentally removed the parentheses here, but they are required because '!' has higher precedence than '&'. Fixes: fa0f5273 ("ip: use rb trees for IP frag queue.") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Yangbo Lu authored
This is a fix-up patch for below build issue with multi_v7_defconfig. drivers/ptp/ptp_qoriq.o: In function `qoriq_ptp_probe': ptp_qoriq.c:(.text+0xd0c): undefined reference to `__aeabi_uldivmod' Fixes: 91305f28 ("ptp_qoriq: support automatic configuration for ptp timer") Signed-off-by:
Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by:
-
Yafang Shao authored
The sock_flag() check is alreay inside sock_enable_timestamp(), so it is unnecessary checking it in the caller. void sock_enable_timestamp(struct sock *sk, int flag) { if (!sock_flag(sk, flag)) { ... } } Signed-off-by:Yafang Shao <laoar.shao@gmail.com> Signed-off-by:
-
Jason Wang authored
We use to have message like: struct vhost_msg { int type; union { struct vhost_iotlb_msg iotlb; __u8 padding[64]; }; }; Unfortunately, there will be a hole of 32bit in 64bit machine because of the alignment. This leads a different formats between 32bit API and 64bit API. What's more it will break 32bit program running on 64bit machine. So fixing this by introducing a new message type with an explicit 32bit reserved field after type like: struct vhost_msg_v2 { __u32 type; __u32 reserved; union { struct vhost_iotlb_msg iotlb; __u8 padding[64]; }; }; We will have a consistent ABI after switching to use this. To enable this capability, introduce a new ioctl (VHOST_SET_BAKCEND_FEATURE) for userspace to enable this feature (VHOST_BACKEND_F_IOTLB_V2). Fixes: 6b1e6cc7 ("vhost: new device IOTLB API") Signed-off-by:Jason Wang <jasowang@redhat.com> Signed-off-by:
-
zhong jiang authored
The err is not modified after initalization, So remove it and make it to be void function. Signed-off-by:
zhong jiang <zhongjiang@huawei.com> Signed-off-by:
-
Al Viro authored
__inet6_lookup_established() expect th->dport passed in host-endian, not net-endian. The reason is microoptimization in __inet6_lookup(), but if you use the lower-level helpers, you have to play by their rules... Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Alexander Aring authored
Since mac802154_hwsim the fakelb driver will get deprecated. This patch will notifier all users of fakelb to switch to the new mac802154_hwsim driver. Signed-off-by:
Alexander Aring <aring@mojatatu.com> Signed-off-by:
Stefan Schmidt <stefan@datenfreihafen.org>
-
Alexander Aring authored
This patch adds a new virtual driver mac802154_hwsim which is based on the fakelb driver. The fakelb driver will get deprecated and hopefully removed someday. The main reason for doing this step is to rename the driver to mac802154_hwsim to have a similar naming scheme as mac80211_hwsim, which is more popular in the 802.11 wireless word and the idea is the same behind this driver. The new features of this driver are to have knowledge about connected edges, which can be changed during runtime. This offers a testing environment for routing protocols e.g. RPL. The default behaviour is still as fakelb: two radios connected to each other. New added radios during runtime will not be connected to other wpan_hwsim instances. The netlink api is not namespace aware on purpose, only the registered wpan_phy's can be moved to namespaces. The physical layer according to wiresless "air" communication can be handled across namespaces. Furthermore the edges can be weighted with the LQI value according IEEE 802.15.4 which offers additional handling to mark bad or good connection indicators to other connected virtual phys. Signed-off-by:
-
Colin Ian King authored
Pointers fq and net are being assigned but are never used hence they are redundant and can be removed. Cleans up clang warnings: warning: variable 'fq' set but not used [-Wunused-but-set-variable] warning: variable 'net' set but not used [-Wunused-but-set-variable] Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Alexander Aring authored
This patch is necessary if case of AF_PACKET or other socket interface which I am aware of it and didn't allocated the necessary room. Reported-by:
David Palma <david.palma@ntnu.no> Reported-by:
Rabi Narayan Sahoo <rabinarayans0828@gmail.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Alexander Aring authored
This patch fixes patch add handling to take care tail and headroom for single 6lowpan frames. We need to be sure we have a skb with the right head and tailroom for single frames. This patch do it by using skb_copy_expand() if head and tailroom is not enough allocated by upper layer. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=195059Reported-by:
-
Stefan Schmidt authored
-
Vlad Buslov authored
Match patterns for some skbedit tests contain duplicate whitespace that is not present in actual tc output. This causes tests to fail because they can't match required action, even when it was successfully created. Signed-off-by:
Vlad Buslov <vladbu@mellanox.com> Acked-by:
Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
-
Vlad Buslov authored
Match patterns for some connmark tests contain duplicate whitespace that is not present in actual tc output. This causes tests to fail because they can't match required action, even when it was successfully created. Fixes: 1dad0f9f ("tc-testing: add connmark action tests") Signed-off-by:
-
Vlad Buslov authored
Test 6fb4 creates one mirred and one pipe action, but only flushes mirred on teardown. Leaking pipe action causes failures in other tests. Add additional teardown command to also flush gact actions. Signed-off-by:
-
Vlad Buslov authored
Fix expected ip address to actually match configured ip address. Fix test to expect single matched filter. Signed-off-by:
-
David S. Miller authored
Merge tag 'wireless-drivers-next-for-davem-2018-08-05' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 4.19 This time a bigger pull request as we have two new Mediatek drivers MT76x2u (CONFIG_MT76x2U) and MT76x0U (CONFIG_MT76x0U). Also iwlwifi got support for the new IEEE 802.11ax standard, the successor for 802.11ac. And naturally smaller new features and bugfixes all over. Major changes: wcn36xx * fix WEP in client mode wil6210 * add support for Talyn-MB (Talyn ver 2.0) device * add support for enhanced DMA firmware feature iwlwifi * implement 802.11ax D2.0 * support for the new 22560 device family * new PCI IDs for 22000 and 22560 qtnfmac * implement cfg80211 power management callback * enable multiple SSIDs scan support * qtnfmac: implement basic WoWLAN support mt7601u * fall back to software encryption for hw unsupported ciphers * enable 802.11 Management Frame Protection (MFP) mt76 * support setting RTS threshold * add USB support * add support for MT76x2u devices * add support for MT76x0U devices mwifiex * allow user space to set all other IEs except WMM IE rsi * add firmware support for AP+BT dual mode ==================== Signed-off-by:
-
David S. Miller authored
Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2018-08-05 Here's the main bluetooth-next pull request for the 4.19 kernel. - Added support for Bluetooth Advertising Extensions - Added vendor driver support to hci_h5 HCI driver - Added serdev support to hci_h5 driver - Added support for Qualcomm wcn3990 controller - Added support for RTL8723BS and RTL8723DS controllers - btusb: Added new ID for Realtek 8723DE - Several other smaller fixes & cleanups Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by:
-
David S. Miller authored
Ido Schimmel says: ==================== mlxsw: Enable MC-aware mode for mlxsw ports Petr says: Due to an issue in Spectrum chips, when unicast traffic shares the same queue as BUM traffic, and there is a congestion, the BUM traffic is admitted to the queue anyway, thus pushing out all UC traffic. In order to give unicast traffic precedence over BUM traffic, configure multicast-aware mode on all ports. Under multicast-aware regime, when assigning traffic class to a packet, the switch doesn't merely take the value prescribed by the QTCT register. For BUM traffic, it instead assigns that value plus 8. That limits the number of available TCs, but since mlxsw currently only uses the lower eight anyway, it is no real loss. The two TCs (UC and MC one) are then mapped to the same subgroup and strictly prioritized so that UC traffic is preferred in case of congestion. In patch #1, introduce a new register, QTCTM, which enables the multicast-aware mode. In patch #2, fix a typo in related code. In patch #3, set up TCs and QTCTM to enable multicast-aware mode. ==================== Signed-off-by: -
Petr Machata authored
In order to give unicast traffic precedence over BUM traffic, configure multicast-aware mode on all ports. Under multicast-aware regime, when assigning traffic class to a packet, the switch doesn't merely take the value prescribed by the QTCT register. For BUM traffic, it instead assigns that value plus 8. ETS elements for TCs 8..15 thus need to be configured as well. Extend mlxsw_sp_port_ets_init() so that it maps each of them to the same subgroup as their corresponding TC from the range 0..7, such that TCs X and X+8 map to the same subgroup. The existing code configures TCs with strict priority. So far this was immaterial, because each TC had its own subgroup. Now that two TCs share a subgroup it becomes important. TCs are prioritized in order of 7, 6, ..., 0, 15, 14, ..., 8: the higher TCs used for BUM traffic end up being deprioritized. Since that's what's needed, keep that configuration as it is, and configure the new TCs likewise. Finally in mlxsw_sp_port_create(), invoke configuration of QTCTM to enable MC-aware mode on each port. Signed-off-by:
Petr Machata <petrm@mellanox.com> Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
-
Petr Machata authored
Signed-off-by:
-
Petr Machata authored
This register configures if the Switch Priority to Traffic Class mapping is based on Multicast packet indication. If so, then multicast packets will get a Traffic Class that is plus (cap_max_tclass_data/2) the value configured by QTCT. Signed-off-by:
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 1402059 ("Missing break in switch") Addresses-Coverity-ID: 1402060 ("Missing break in switch") Addresses-Coverity-ID: 1402061 ("Missing break in switch") Signed-off-by:Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
-
Dan Carpenter authored
We forgot to set the error code on this path, so we return NULL instead of an error pointer. In the current code kzalloc() won't fail for small allocations so this doesn't really affect runtime. Fixes: b95ec7eb ("net: sched: cls_flower: implement chain templates") Signed-off-by:
-
Li RongQing authored
dev_set_mtu_ext is able to fail with a valid mtu value, at that condition, extack._msg is not set and random since it is in stack, then kernel will crash when print it. Fixes: 7a4c53be ("net: report invalid mtu value via netlink extack") Signed-off-by:
Zhang Yu <zhangyu31@baidu.com> Signed-off-by:
Li RongQing <lirongqing@baidu.com> Signed-off-by:
-
Florian Westphal authored
don't bother with pathological cases, they only waste cycles. IPv6 requires a minimum MTU of 1280 so we should never see fragments smaller than this (except last frag). v3: don't use awkward "-offset + len" v2: drop IPv4 part, which added same check w. IPV4_MIN_MTU (68). There were concerns that there could be even smaller frags generated by intermediate nodes, e.g. on radio networks. Cc: Peter Oskolkov <posk@google.com> Cc: Eric Dumazet <edumazet@google.com> Signed-off-by:Florian Westphal <fw@strlen.de> Signed-off-by:
-
David S. Miller authored
Peter Oskolkov says: ==================== ip: Use rb trees for IP frag queue. This patchset * changes IPv4 defrag behavior to match that of IPv6: overlapping fragments now cause the whole IP datagram to be discarded (suggested by David Miller): there are no legitimate use cases for overlapping fragments; * changes IPv4 defrag queue from a list to a rb tree (suggested by Eric Dumazet): this change removes a potential attach vector. Upcoming patches will contain similar changes for IPv6 frag queue, as well as a comprehensive IP defrag self-test (temporarily delayed). ==================== Signed-off-by: -
Peter Oskolkov authored
Similar to TCP OOO RX queue, it makes sense to use rb trees to store IP fragments, so that OOO fragments are inserted faster. Tested: - a follow-up patch contains a rather comprehensive ip defrag self-test (functional) - ran neper `udp_stream -c -H <host> -F 100 -l 300 -T 20`: netstat --statistics Ip: 282078937 total packets received 0 forwarded 0 incoming packets discarded 946760 incoming packets delivered 18743456 requests sent out 101 fragments dropped after timeout 282077129 reassemblies required 944952 packets reassembled ok 262734239 packet reassembles failed (The numbers/stats above are somewhat better re: reassemblies vs a kernel without this patchset. More comprehensive performance testing TBD). Reported-by:Jann Horn <jannh@google.com> Reported-by:
Juha-Matti Tilli <juha-matti.tilli@iki.fi> Suggested-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
Peter Oskolkov <posk@google.com> Signed-off-by:
-
Peter Oskolkov authored
Tested: see the next patch is the series. Suggested-by:
-
Peter Oskolkov authored
This behavior is required in IPv6, and there is little need to tolerate overlapping fragments in IPv4. This change simplifies the code and eliminates potential DDoS attack vectors. Tested: ran ip_defrag selftest (not yet available uptream). Suggested-by:
Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:
-
Vakul Garg authored
Function zerocopy_from_iter() unmarks the 'end' in input sgtable while adding new entries in it. The last entry in sgtable remained unmarked. This results in KASAN error report on using apis like sg_nents(). Before returning, the function needs to mark the 'end' in the last entry it adds. Signed-off-by:
Vakul Garg <vakul.garg@nxp.com> Acked-by:
Dave Watson <davejwatson@fb.com> Signed-off-by:
-
Georg Kohmann authored
When a ICMPV6_PKT_TOOBIG is received from a link local address the pmtu will be updated on a route with an arbitrary interface index. Subsequent packets sent back to the same link local address may therefore end up not considering the updated pmtu. Current behavior breaks TAHI v6LC4.1.4 Reduce PMTU On-link. Referring to RFC 1981: Section 3: "Note that Path MTU Discovery must be performed even in cases where a node "thinks" a destination is attached to the same link as itself. In a situation such as when a neighboring router acts as proxy [ND] for some destination, the destination can to appear to be directly connected but is in fact more than one hop away." Using the interface index from the incoming ICMPV6_PKT_TOOBIG when updating the pmtu. Signed-off-by:
Georg Kohmann <geokohma@cisco.com> Signed-off-by:
-
Yangbo Lu authored
This patch is to support automatic configuration for ptp timer. If required ptp dts properties are not provided, driver could try to calculate a set of default configurations to initialize the ptp timer. This makes the driver work for many boards which don't have the required ptp dts properties in current kernel. Also the users could set dts properties by themselves according to their requirement. Signed-off-by:
-
Yangbo Lu authored
This patch is to add clocks property for fman ptp timer node. Signed-off-by:
-
Yangbo Lu authored
This patch is to add clocks property for fman ptp timer node. Signed-off-by:
-
David S. Miller authored
Michael Chan says: ==================== bnxt_en: Updates for net-next. This series includes the usual firmware spec update. The driver has added external phy loopback test and phy setup retry logic that is needed during hotplug. In the SRIOV space, the driver has added a new VF resource allocation mode that requires the VF driver to reserve resources during IFUP. IF state changes are now propagated to firmware so that firmware can release some resources during IFDOWN. ethtool method to get firmware core dump and hwmon temperature reading have been added. DSCP to user priority support has been added to the driver's DCBNL interface, and the CoS queue logic has been refined to make sure that the special RDMA Congestion Notification hardware CoS queue will not be used for networking traffic. ==================== Signed-off-by:
-
