- 14 Apr, 2015 20 commits
-
-
Jeff Kirsher authored
Output of ethtool was reporting 2 rx_errors entries. This change removes one of the redundant entries. Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by:
Matthew Vick <matthew.vick@intel.com> Tested-by:
Krishneil Singh <krishneil.k.singh@intel.com>
-
Jeff Kirsher authored
The function collecting Tx statistics was actually using values from the RX ring. Thus, Tx and Rx statistics values reported by "ifconfig" will return identical values. This change corrects this error and the Tx statistics is now reading from the Tx ring. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller authored
The dwmac-socfpga.c conflict was a case of a bug fix overlapping changes in net-next to handle an error pointer differently. Signed-off-by:David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Hariprasad Shenai says: ==================== cxgb4: Misc. fixes for sge Increases value of MAX_IMM_TX_PKT_LEN to improve latency, fill freelist starving threshold based on adapter type, add comments for tx flits and sge length code and don't call t4_slow_intr_handler when we are not master PF. This patch series has been created against net-next tree and includes patches on cxgb4 driver We have included all the maintainers of respective drivers. Kindly review the change and let us know in case of any review comments. ==================== Signed-off-by: -
Hariprasad Shenai authored
Signed-off-by:
Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by:
-
Hariprasad Shenai authored
Add comment for tx filt and sge length calucaltion code, also remove a hardcoded value Signed-off-by:
-
Hariprasad Shenai authored
Signed-off-by:
-
Hariprasad Shenai authored
fl_starv_thres could be different from adapter to adapter, don't use hardcoded values Signed-off-by:
-
Hariprasad Shenai authored
This allows a significant latency drop for packets of sizes between 128 and 192 bytes Signed-off-by:
-
Felix Fietkau authored
The ring size is always known at compile time, so make the code a bit more efficient Signed-off-by:
Felix Fietkau <nbd@openwrt.org> Signed-off-by:
-
Felix Fietkau authored
The driver needs to inform the hardware about the first invalid (not yet filled) rx slot, by writing its DMA descriptor pointer offset to the BGMAC_DMA_RX_INDEX register. This register was set to a value exceeding the rx ring size, effectively allowing the hardware constant access to the full ring, regardless of which slots are initialized. To fix this issue, always mark the last filled rx slot as invalid. Signed-off-by:
-
Felix Fietkau authored
Instead of allocating buffers at device init time and initializing descriptors at device open, do both at the same time (during open). Free all buffers when closing the device. Signed-off-by:
Rafał Miłecki <zajec5@gmail.com> Signed-off-by:
-
Felix Fietkau authored
Limiting it to 511 looks like a failed attempt at leaving one descriptor empty to allow the hardware to stop processing a buffer that has not been prepared yet. However, this doesn't work because this affects the total ring size as well Signed-off-by:
-
Felix Fietkau authored
In very rare cases, the MAC can catch an internal buffer that is bigger than it's supposed to be. Instead of crashing the kernel, simply pass the buffer back to the hardware Signed-off-by:
-
Felix Fietkau authored
Allocate a new buffer before processing the completed one. If allocation fails, reuse the old buffer. Signed-off-by:
-
Felix Fietkau authored
A packet buffer offset of 30 bytes is inefficient, because the first 2 bytes end up in a different cacheline. Signed-off-by:
-
Felix Fietkau authored
Always poll rx and tx during NAPI poll instead of relying on the status of the first interrupt. This prevents bgmac_poll from leaving unfinished work around until the next IRQ. In my tests this makes bridging/routing throughput under heavy load more stable and ensures that no new IRQs arrive as long as bgmac_poll uses up the entire budget. Signed-off-by:
-
Felix Fietkau authored
Keep incrementing ring->start and ring->end instead of pointing it to the actual ring slot entry. This simplifies the calculation of the number of free slots. Signed-off-by:
-
Daniel Axtens authored
The toshiba drivers had celleb as an optional dependency. celleb has been dropped [1], so clean that out of Kconfig. [1] http://patchwork.ozlabs.org/patch/451730/ CC: netdev@vger.kernel.org CC: Valentin Rothberg <valentinrothberg@gmail.com> CC: mpe@ellerman.id.au CC: linuxppc-dev@lists.ozlabs.org Signed-off-by:
Daniel Axtens <dja@axtens.net> Signed-off-by:
-
Haiyang Zhang authored
If remaining space in a send buffer slot is too small for the whole message, we only copy the RNDIS header and PPI data into send buffer, so we can batch one more packet each time. It reduces the vmbus per-message overhead. Signed-off-by:
Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by:
K. Y. Srinivasan <kys@microsoft.com> Signed-off-by:
-
- 13 Apr, 2015 20 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsDavid S. Miller authored
Al Viro says: ==================== netdev-related stuff in vfs.git There are several commits sitting in vfs.git that probably ought to go in via net-next.git. First of all, there's merge with vfs.git#iocb - that's Christoph's aio rework, which has triggered conflicts with the ->sendmsg() and ->recvmsg() patches a while ago. It's not so much Christoph's stuff that ought to be in net-next, as (pretty simple) conflict resolution on merge. The next chunk is switch to {compat_,}import_iovec/import_single_range - new safer primitives for initializing iov_iter. The primitives themselves come from vfs/git#iov_iter (and they are used quite a lot in vfs part of queue), conversion of net/socket.c syscalls belongs in net-next, IMO. Next there's afs and rxrpc stuff from dhowells. And then there's sanitizing kernel_sendmsg et.al. + missing inlined helper for "how much data is left in msg->msg_iter" - this stuff is used in e.g. cifs stuff, but it belongs in net-next. That pile is pullable from git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs.git for-davem I'll post the individual patches in there in followups; could you take a look and tell if everything in there is OK with you? ==================== Signed-off-by: -
Eric Dumazet authored
Using a timer wheel for timewait sockets was nice ~15 years ago when memory was expensive and machines had a single processor. This does not scale, code is ugly and source of huge latencies (Typically 30 ms have been seen, cpus spinning on death_lock spinlock.) We can afford to use an extra 64 bytes per timewait sock and spread timewait load to all cpus to have better behavior. Tested: On following test, /proc/sys/net/ipv4/tcp_tw_recycle is set to 1 on the target (lpaa24) Before patch : lpaa23:~# ./super_netperf 200 -H lpaa24 -t TCP_CC -l 60 -- -p0,0 419594 lpaa23:~# ./super_netperf 200 -H lpaa24 -t TCP_CC -l 60 -- -p0,0 437171 While test is running, we can observe 25 or even 33 ms latencies. lpaa24:~# ping -c 1000 -i 0.02 -qn lpaa23 ... 1000 packets transmitted, 1000 received, 0% packet loss, time 20601ms rtt min/avg/max/mdev = 0.020/0.217/25.771/1.535 ms, pipe 2 lpaa24:~# ping -c 1000 -i 0.02 -qn lpaa23 ... 1000 packets transmitted, 1000 received, 0% packet loss, time 20702ms rtt min/avg/max/mdev = 0.019/0.183/33.761/1.441 ms, pipe 2 After patch : About 90% increase of throughput : lpaa23:~# ./super_netperf 200 -H lpaa24 -t TCP_CC -l 60 -- -p0,0 810442 lpaa23:~# ./super_netperf 200 -H lpaa24 -t TCP_CC -l 60 -- -p0,0 800992 And latencies are kept to minimal values during this load, even if network utilization is 90% higher : lpaa24:~# ping -c 1000 -i 0.02 -qn lpaa23 ... 1000 packets transmitted, 1000 received, 0% packet loss, time 19991ms rtt min/avg/max/mdev = 0.023/0.064/0.360/0.042 ms Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Richard Weinberger authored
The printed values are all of type unsigned integer, therefore use %u instead of %d. Otherwise an user can face negative values. Signed-off-by:
Richard Weinberger <richard@nod.at> Acked-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Richard Weinberger authored
The printed values are all of type unsigned integer, therefore use %u instead of %d. Otherwise an user can face negative values. Fixes: $ cat /proc/net/netfilter/nfnetlink_queue 0 29508 278 2 65531 0 2004213241 -2129885586 1 1 -27747 0 2 65531 0 0 0 1 2 -27748 0 2 65531 0 0 0 1 Signed-off-by: -
Richard Weinberger authored
The netlink portid is an unsigned integer, use this type also in netfilter. Signed-off-by:
-
Richard Weinberger authored
portid is an unsigned integer. Fix urelease_work to match all other portid user in the kernel. Signed-off-by:
-
Richard Weinberger authored
portid is an unsigned integer. Fix netlink_notify to match all other portid user in the kernel. Signed-off-by:
-
Kenneth Klette Jonassen authored
Since retransmitted segments are not used for RTT estimation, previously SACKed segments present in the rtx queue are used. This estimation can be several times larger than the actual RTT. When a cumulative ack covers both previously SACKed and retransmitted segments, CC may thus get a bogus RTT. Such segments previously had an RTT estimation in tcp_sacktag_one(), so it seems reasonable to not reuse them in tcp_clean_rtx_queue() at all. Afaik, this has had no effect on SRTT/RTO because of Karn's check. Signed-off-by:
Kenneth Klette Jonassen <kennetkl@ifi.uio.no> Acked-by:
Neal Cardwell <ncardwell@google.com> Tested-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
-
Daniel Borkmann authored
Even if we make use of classifier and actions from the egress path, we're going into handle_ing() executing additional code on a per-packet cost for ingress qdisc, just to realize that nothing is attached on ingress. Instead, this can just be blinded out as a no-op entirely with the use of a static key. On input fast-path, we already make use of static keys in various places, e.g. skb time stamping, in RPS, etc. It makes sense to not waste time when we're assured that no ingress qdisc is attached anywhere. Enabling/disabling of that code path is being done via two helpers, namely net_{inc,dec}_ingress_queue(), that are being invoked under RTNL mutex when a ingress qdisc is being either initialized or destructed. Signed-off-by:Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Alexei Starovoitov <ast@plumgrid.com> Signed-off-by:
-
David S. Miller authored
Thomas Graf says: ==================== Bring sizeof(net_device) down to < 2K bytes The size of struct net_device crossed the 2K boundary a while ago which is a waste in combination with many net namespaces. This series brings the size of struct net_device down to well below 2K in total size with a typical configuration. Some reserves a several holes leave room for further expansion. Before: /* size: 2176, cachelines: 34, members: 121 */ After: /* size: 1984, cachelines: 31, members: 120 */ ==================== Signed-off-by: -
Thomas Graf authored
Some trivial reorders while preserving the RX/TX cache lines split to fill a couple of holes. Signed-off-by:
Thomas Graf <tgraf@suug.ch> Acked-by:
-
Thomas Graf authored
e1000e is the only driver requiring pm_qos_req, instead of causing every device to waste up to 240 bytes. Allocate it for the specific driver. Signed-off-by:
-
Nicolas Dichtel authored
When a new rtnl or xfrm command is added, this part of the code is frequently missing. Let's help the developer with a build time test. Signed-off-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller authored
Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2015-04-11 This series contains updates to iflink, ixgbe and ixgbevf. The entire set of changes come from Vlad Zolotarov to ultimately add the ethtool ops to VF driver to allow querying the RSS indirection table and RSS random key. Currently we support only 82599 and x540 devices. On those devices, VFs share the RSS redirection table and hash key with a PF. Letting the VF query this information may introduce some security risks, therefore this feature will be disabled by default. The new netdev op allows a system administrator to change the default behaviour with "ip link set" command. The relevant iproute2 patch has already been sent and awaits for this series upstream. ==================== Signed-off-by: -
David S. Miller authored
Cong Wang says: ==================== fou: some fixes and updates Patch 1~3 fix some minor bugs in net/ipv4/fou.c, the only thing I am not sure is if it's too late to change the byte order of FOU_ATTR_PORT, if so we have to fix iproute2 instead of kernel. Patch 4~5 add some new features to make it complete. v2: make fou->port be16 too ==================== Acked-by:
Tom Herbert <tom@herbertland.com> Signed-off-by:
-
WANG Cong authored
Cc: Tom Herbert <tom@herbertland.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
WANG Cong authored
Also convert the spinlock to a mutex. Cc: Tom Herbert <tom@herbertland.com> Signed-off-by:
-
WANG Cong authored
udp_config.local_udp_port is be16. And iproute2 passes network order for FOU_ATTR_PORT. This doesn't fix any bug, just for consistency. Cc: Tom Herbert <tom@herbertland.com> Signed-off-by:
-
WANG Cong authored
Not a big deal, just for corretness. Cc: Tom Herbert <tom@herbertland.com> Signed-off-by:
-
WANG Cong authored
This fixes the following harmless warning: ./ip/ip fou del port 7777 [ 122.907516] udp_del_offload: didn't find offload for port 7777 Cc: Tom Herbert <tom@herbertland.com> Signed-off-by:
-
