* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [NETFILTER]: Add xt_statistic.h to the header list for usermode programs
  [BNX2]: Fix suspend/resume problem.
  [TG3]: Fix suspend/resume problem.

* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6:
  [SPARC32]: Fix build.

* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: (32 commits)
  [SCSI] aacraid: prevent panic on adapter resource failure
  [SCSI] aha152x: use data accessors and !use_sg cleanup
  [SCSI] aha152x: Fix check_condition code-path
  [SCSI] aha152x: Clean Reset path
  [SCSI] aha152x: preliminary fixes and some comments
  [SCSI] aha152x: use bounce buffer
  [SCSI] aha152x: fix debug mode symbol conflict
  [SCSI] sd: disentangle barriers in SCSI
  [SCSI] lpfc : scsi command accessor fix for 8.2.2
  [SCSI] qlogicpti: Some cosmetic changes
  [SCSI] lpfc 8.2.2 : Change version number to 8.2.2
  [SCSI] lpfc 8.2.2 : Style cleanups
  [SCSI] lpfc 8.2.2 : Miscellaneous Bug Fixes
  [SCSI] lpfc 8.2.2 : Miscellaneous management and logging mods
  [SCSI] lpfc 8.2.2 : Rework the lpfc_printf_log() macro
  [SCSI] lpfc 8.2.2 : Attribute and Parameter splits for vport and physical port
  [SCSI] lpfc 8.2.2 : Fix locking around HBA's port_list
  [SCSI] lpfc 8.2.2 : Error messages and debugfs updates
  [SCSI] initialize shost_data to zero
  [SCSI] mptsas: add SMP passthrough support via bsg
  ...

This 965G and above chipsets moved the batch buffer non-secure bits to
another place. This means that previous drm's allowed in-secure batchbuffers
to be submitted to the hardware from non-privileged users who are logged
into X and and have access to direct rendering.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Add xt_statistic.h to the list of headers to install.

Apparently needed to build newer versions of iptables.
Signed-off-by: Chuck Ebbert <cebbert@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Correct incorrect removal of asm-generic/fcntl.h from asm-sparc/fcntl.h by 
commit 6ba60d21.
Signed-off-by: Mark Fortescue <mark@mtfhpc.demon.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

If the driver fails to allocate the contiguous (DMAable) memory for
system reasons, we fail to load the instance, but then we try to free
the <nul> allocation in the cleanup code and we get a panic in
pci_free_consistent(). This is reported against an older kernel, hope
this is relevant for latest/greatest.
Signed-off-by: Mark Salyzyn <aacraid@adaptec.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

And finally this is the regular !use_sg cleanup
and use of data accessors.
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

check_condition code-path was similar but more
complicated to Reset. It went like this:

  1. extra space was allocated at aha152x_scdata for mirroring
    scsi_cmnd members.
  2. At aha152x_internal_queue() every not check_condition
    (REQUEST_SENSE) command was copied to above members in
    case of error.
  3. At busfree_run() in the DONE_CS phase if a Status of
    SAM_STAT_CHECK_CONDITION was detected. The command was
    re-queued Internally using aha152x_internal_queue(,,check_condition,)
    The old command members are over written with the
    REQUEST_SENSE info.
  4. At busfree_run() in the DONE_CS phase again. If it is a
    check_condition command, info was restored from mirror
    made at first call to aha152x_internal_queue() (see 2)
    and the command is completed.

What I did is:

  1. Allocate less space in aha152x_scdata only for the 16-byte
    original command. (which is actually not needed by scsi-ml
    anymore at this stage. But this is to much knowledge of scsi-ml)
  2. If Status == SAM_STAT_CHECK_CONDITION, then like before
     re-queue a REQUEST_SENSE command. But only now save original
     command members. (Less of them)
  3. In aha152x_internal_queue(), just like for Reset, use the
    check_condition hint to set differently the working members.
    execute the command.
  4. At busfree_run() in the DONE_CS phase again. restore needed
     members.

While at it. This patch fixes a BUG. Old code when sending
a REQUEST_SENSE for a failed command. Would than return with
cmd->resid == 0 which was the status of the REQUEST_SENSE.
The failing command resid was lost. And when would resid
be interesting if not on a failing command?
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

What Reset code was doing:  Save command's important/dangerous
Info on stack. NULL those members from scsi_cmnd.
Issue a Reset. wait for it to finish than restore members
and return.

What I do is save or NULL nothing. But use the "resetting"
hint in aha152x_internal_queue() to NULL out working members
and leave struct scsi_cmnd alone.

The indent here looks funny but it will change/drop in last
patch and it is clear this way what changed.
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

  hunk by hunk:
  - CHECK_CONDITION is what happens to cmnd->status >> 1
    or after status_byte() macro. But here it is used
    directly on status which means 0x1 which is an undefined
    bit in the standard. And is a status that will never
    return from a target.

  - in busfree_run at the DONE_SC phase we have 3 distinct
    operation:
	1-if(DONE_SC->SCp.phase & check_condition)
          The REQUEST_SENSE command return.
          - Restore original command
	  - Than continue to operation 3.
	2-if(DONE_SC->SCp.Status==SAM_STAT_CHECK_CONDITION)
          A regular command returned with a status.
	  - Internally re-Q a REQUEST_SENSE.
	  - Do not do operation 3.
	3-
	  - Complete the command and return it to scsi-ml
     So the 0x2 in both these operations (1,2) means the scsi
     check-condition status, hence SAM_STAT_CHECK_CONDITION

  - Here the code asks about !(DONE_SC->SCp.Status & not_issued)
    but "not_issued" is an enum belonging to the "phase" member
    and not to the Status returned from target. The reason this
    works is because not_issued==1 and Also CHECK_CONDITION==1
    (remember from hunk 1). So actually the code was asking
    !(DONE_SC->SCp.Status & CHECK_CONDITION). Which means
    "Has the status been read from target yet?"
    Staus is read at status_run(). "not_issued" is
    cleared in seldo_run() which is usually earlier than
    status_run().

  So this patch does nothing as far as assembly is concerned
  but it does let the reader understand what is going on.
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Cause highmem buffers to be bounced to low memory until this
driver supports highmem addresses.  Otherwise it just oopses
on NULL buffer addresses.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

The symbol <debug_locks> conflicts with the rather global one in
include/linux/locks.h.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Our current implementation has a generic set of barrier functions that
go through the SCSI driver model.  Realistically, this is unnecessary,
because the only device that can use barriers (sd) can set the flush
functions up at probe or revalidate time.  This patch pulls the barrier
functions out of the mid layer and scsi driver model and relocates them
directly in sd.
Acked-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

The device would not resume properly if it was shutdown before the system
was suspended.  In such scenario where the netif_running state is 0,
bnx2_suspend() would not save the PCI state and so the memory enable bit
and bus master enable bit would be lost.

We fix this by always saving and restoring the PCI state in
bnx2_suspend() and bnx2_resume() regardless of netif_running() state.

Update version to 1.6.4.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Joachim Deguara <joachim.deguara@amd.com> reported that tg3 devices
would not resume properly if the device was shutdown before the system
was suspended.  In such scenario where the netif_running state is 0,
tg3_suspend() would not save the PCI state and so the memory enable bit
and bus master enable bit would be lost.

We fix this by always saving and restoring the PCI state in
tg3_suspend() and tg3_resume() regardless of netif_running() state.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
  [POWERPC] Fixes for the SLB shadow buffer code
  [POWERPC] Fix a compile warning in powermac/feature.c
  [POWERPC] Fix a compile warning in pci_32.c
  [POWERPC] Fix parse_drconf_memory() for 64-bit start addresses
  [POWERPC] Fix num_cpus calculation in smp_call_function_map()
  [POWERPC] ps3: Fix section mismatch in ps3/setup.c
  [POWERPC] spufs: Fix affinity after introduction of node_allowed() calls
  [POWERPC] Fix special PTE code for secondary hash bucket
  [POWERPC] Expand RPN field to 34 bits when using 64k pages

 * wrong argument passed to pci_unmap_single() on failure
   exit paths
 * leak in the same area
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* git://git.infradead.org/~dwmw2/mtd-2.6.23:
  [MTD] Makefile fix for mtdsuper

* git://git.infradead.org/battery-2.6:
  Don't compile the PMU power driver on 64-bit PowerPC

* master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6.23:
  sh: fix defconfigs for sh7751r boards
  sh: fix cf support on r2d boards
  sh: update r2d defconfig
  sh: update snapgear defconfig.
  sh: Fix SH-X3 FPU exception handling.
  sh: Fix pgd mismatch from cached TTB in unhandled fault.
  sh: Don't include fault-nommu on SH-2/SH-2A.
  sh: Fix irqflags tracing for SH-3/4 nommu.
  sh: Fix lockdep debugging oops on SH-3/4.

There is a couple of subtle checks which were needed to handle ptracing from
the same thread group. This was deprecated a long ago, imho this code just
complicates the understanding.

And, the "->parent->signal->flags & SIGNAL_GROUP_EXIT" check in exit_notify()
is not right. SIGNAL_GROUP_EXIT can mean exec(), not exit_group(). This means
ptracer can lose a ptraced zombie on exec(). Minor problem, but still the bug.
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Acked-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

the early setup function serial8250_console_early_setup() can be called
from non __init code (eg. hotpluggable serial ports like serial_cs) so
remove the __init from the call chain to avoid crashes.
Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch>
Cc: Yinghai Lu <yinghai.lu@sun.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6:
  [SPARC]: Fix O_CLOEXEC values.
  [SPARC32]: Fix modular build of floppy driver.
  [SOUND] CS4231 SBus: Two fixes.
  [CG6]: fix memory size detection
  [SPARC64]: Add missing dma_sync_single_range_for_*().

* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [TCP]: DSACK signals data receival, be conservative
  [TCP]: Also handle snd_una changes in tcp_cwnd_down
  [TIPC]: Fix two minor sparse warnings.
  [TIPC]: Make function tipc_nameseq_subscribe static.
  [PF_KEY]: Fix ipsec not working in 2.6.23-rc1-git10
  [TCP]: Invoke tcp_sendmsg() directly, do not use inet_sendmsg().
  [IPV4] route.c: mostly kmalloc + memset conversion to k[cz]alloc
  [IPV4] raw.c: kmalloc + memset conversion to kzalloc
  [NETFILTER] nf_conntrack_l3proto_ipv4_compat.c: kmalloc + memset conversion to kzalloc
  [NETFILTER] nf_conntrack_expect.c: kmalloc + memset conversion to kzalloc
  [NET]: Removal of duplicated include net/wanrouter/wanmain.c
  SCTP: remove useless code in function sctp_init_cause
  SCTP: drop SACK if ctsn is not less than the next tsn of assoc
  SCTP: IPv4 mapped addr not returned in SCTPv6 accept()
  SCTP: IPv4 mapped addr not returned in SCTPv6 accept()
  sctp: fix shadow symbol in net/sctp/tsnmap.c
  sctp: try to fix readlock
  sctp: remove shadowed symbols
  sctp: move global declaration to header file.
  sctp: make locally used function static

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
  firewire: fw-core: make two variables static
  firewire: fw-ohci: dma_free_coherent needs IRQs enabled
  firewire: fw-sbp2: set correct maximum payload (fixes CardBus adapters)
  ieee1394: sbp2: more correct Kconfig dependencies
  ieee1394: revert "sbp2: enforce 32bit DMA mapping"

The one choosen by asm-generic/fcntl.h is not appropriate
for this platform.

Noticed by Ulrich Drepper.
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: David S. Miller <davem@davemloft.net>

Remove unnecessary sbus_dma_reset function and change sbus_dma_enable
to avoid occasional system crashes when stopping recording.
Signed-off-by: Georg Chini <georg.chini@triaton-webhosting.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch fixes memory size detection on the CG6 card.
The 1MB TGX card has dblbuf property set to 0.
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>

Reported by Andrew Morton.
Signed-off-by: David S. Miller <davem@davemloft.net>

It was pointed out by Boaz Harrosh <bharrosh@panasas.com> that our
8.2.2 lpfc patches revert a change to using SCSI command accessor
functions.

This patch, to be applied on top of the 8.2.2. patches, updates the
driver for the accessor functions.
Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

We want drivers/mtd/{mtdcore, mtdsuper, mtdpart}.c to be built and linked
into the same mtd.ko module. Fix the Makefile to ensure this, and remove
duplicate MODULE_ declarations in mtdpart.c, as mtdcore.c already has them.
Signed-off-by: Satyam Sharma <satyam@infradead.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>

On a machine with hardware 64kB pages and a kernel configured for a
64kB base page size, we need to change the vmalloc segment from 64kB
pages to 4kB pages if some driver creates a non-cacheable mapping in
the vmalloc area.  However, we never updated with SLB shadow buffer.
This fixes it.  Thanks to paulus for finding this.

Also added some write barriers to ensure the shadow buffer contents
are always consistent.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

...by using the pci_get API instead of the deprecated old stuff.
Signed-off-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

__must_check, so do so.
Signed-off-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Some new machines use the "ibm,dynamic-reconfiguration-memory" property
to provide memory layout information, rather than via memory nodes.

There is a bug in the code to parse this property for start addresses
over 4GB; we store the start address in an unsigned int, which means
we throw away the high bits and add apparently duplicate regions.
This results in a BUG() in free_bootmem_core().  This fixes it by
using an unsigned long instead.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

In smp_call_function_map(), num_cpus is set to the number of online
CPUs minus one.  However, if the CPU mask does not include all CPUs
(except the one we're running on), the routine will hang in the first
while() loop until the 8 second timeout occurs.

The num_cpus should be set to the number of CPUs specified in the mask
passed into the routine, after we've made any modifications to the
mask.  With this change, we can also get rid of the call to
cpus_empty() and avoid adding another pass through the bitmask.
Signed-off-by: Kevin Corry <kevcorry@us.ibm.com>
Signed-off-by: Carl Love <carll@us.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

WARNING: vmlinux.o(.text+0x605d4): Section mismatch: reference to
.init.text:.__alloc_bootmem (between '.prealloc' and '.ps3_power_save')
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>