- 12 Mar, 2017 40 commits
-
-
Adrien Descamps authored
Fix some sparse warning by using correct endian types in structs and local variables. This patch only fix sparse warnings and do not change the logic. Signed-off-by:
Adrien Descamps <adrien.descamps@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Manoj Sawai authored
Fixes following checkpatch warning: "WARNING: %Lx is non-standard C, use %llx" Signed-off-by:
Manoj Sawai <mas@iitkgp.ac.in> Signed-off-by:
-
Derek Robson authored
Fixed style of block comments across whole driver Found using checkpatch Signed-off-by:
Derek Robson <robsonde@gmail.com> Signed-off-by:
-
Aishwarya Pant authored
Anonymous field declarations are error prone. This patch replaces anonymous declarations with explicit field declarations for typedef SERVICE_CREATION_T in vchiq_mmal_init(..) Signed-off-by:
Aishwarya Pant <aishpant@gmail.com> Signed-off-by:
-
Aishwarya Pant authored
Anonymous field declarations are error prone. This patch replaces anonymous declarations with explicit field declarations for typedef SERVICE_CREATION_T in vc_vchi_audio_init(..) Signed-off-by:
-
Shiva Kerdel authored
Fix prefer kernel type 'u32' over 'uint32_t' checks. Signed-off-by:
Shiva Kerdel <shiva@exdev.nl> Signed-off-by:
-
Shiva Kerdel authored
Fix prefer kernel type 'u16' over 'uint16_t' checks. Signed-off-by:
-
Shiva Kerdel authored
Fix prefer kernel type 'u8' over 'uint8_t' checks. Signed-off-by:
-
Ian Abbott authored
Change the MODULE_DESCRIPTION string from the generic "Comedi low-level driver" to the more specific "Comedi driver for JR3/PCI force sensor board". Signed-off-by:
Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
-
Ian Abbott authored
`jr3_pci_alloc_spriv()` initializes `spriv->range[8]` to use a maximum value of 65536, but that will be overwritten with 65535 at a later time by `jr3_pci_poll_subdevice()` once the "set full scales" command is complete. The initial setting looks like a mistake. This range is only associated with a couple of dummy channels (channels 56 and 57) to read back the model number and serial number, so no user code should be attempting to convert those numbers to physical units. Just change the initial value to 65535 to match the final value. Signed-off-by:
-
Ian Abbott authored
The various supported boards have different numbers of subdevices from 1 to 4. Each subdevice needs a block of registers in PCI BAR 0. Check the region is large enough for the required number of subdevices. Return an error from `jr3_pci_auto_attach()` if it is too small. Signed-off-by:
-
Ian Abbott authored
The driver currently checks the size of `struct jr3_sensor` is correct when a device is attached, returning an error if it is wrong. Replace that with a compile-time check. We don't care too much about the size of `struct jr3_sensor` as it is embedded in the larger `struct jr3_block` and is followed by a lot of padding. We should care more that the size of `struct jr3_block` is correct, as it describes the overall register layout of a block, and there is an array of such blocks (one per subdevice). Check its size at compile-time using the `BUILD_BUG_ON()` macro. Signed-off-by:
-
Ian Abbott authored
`jr3_pci_open()` outputs several debug log messages containing serial numbers of the sensors (one per subdevice) along with a pointer to the subdevice private data structure. The latter is of no use, so reformat the debug log to omit it. `jr3_pci_alloc_spriv()` outputs a debug log message containing more useless information about the remapped base address of the board registers, the sensor registers, and the difference between them. Get rid of it. Signed-off-by:
-
Ian Abbott authored
`struct jr3_t` contains a single array member `block` of member type `struct jr3_block`. Rather than using pointers to `struct jr3_t`, just use pointers to `struct jr3_block` instead and treat it as an array. Replace the local variables `struct jr3_t __iomem *iobase` with `struct jr3_block __iomem *block`. Remove the definition of `struct jr3_t` as it is no longer needed. Signed-off-by:
-
Ian Abbott authored
`struct jr3_t` contains a single array member `block` of a tag-less `struct` type. Rename the tag-less `struct` type to `struct jr3_block` and move its definition outside of `struct jr3_t`. This will allow us to use pointers of this type. Signed-off-by:
-
Ian Abbott authored
The term "channel" is overloaded in this driver. Rename the `channel` member of `struct jr3_t` to `block` to reduce confusion. `block` is an array of an anonymous `struct` type, with each element covering the registers for one subdevice. Signed-off-by:
-
Ian Abbott authored
Rename the `channel[x].data` member of `struct jr3_t` to `channel[x].sensor` to match its type `struct jr3_sensor`. Also rename local variable `ch0data` in `jr3_pci_show_copyright()` to `sensor0` for consistency. It points to the `struct jr3_sensor` embedded in the registers for "channel" 0. Signed-off-by:
-
Ian Abbott authored
The driver overloads the term "channel" a lot. To help reduce confusion, rename the `channel` member of `struct jr3_pci_subdev_private` to `sensor` as it points to a `struct jr3_sensor`. Also rename the various function parameters and local variables called `channel` that point to a `struct jr3_sensor` to `sensor`. Signed-off-by:
-
Ian Abbott authored
The driver overloads the term "channel" a lot. To help reduce confusion, rename `struct jr3_channel` to `struct jr3_sensor`. Signed-off-by:
-
Colin Ian King authored
There is no need to check if ret is non-zero, remove this redundant check and just return the error status from the call to mt9m114_write_reg_array. Detected by CoverityScan, CID#1416577 ("Identical code for different branches") Signed-off-by:Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Colin Ian King authored
The previous statement checks if client is null, so the null check when assigning dev is redundant and can be removed. Detected by CoverityScan, CID#1416555 ("Logically Dead Code") Signed-off-by: -
simran singhal authored
Some functions like kmalloc/kzalloc return NULL on failure. When NULL represents failure, !x is commonly used. This was done using Coccinelle: @@ expression *e; identifier l1; @@ e = \(kmalloc\|kzalloc\|kcalloc\|devm_kzalloc\)(...); ... - e == NULL + !e Signed-off-by:
simran singhal <singhalsimran0@gmail.com> Signed-off-by:
-
simran singhal authored
Some functions like kmalloc/kzalloc return NULL on failure. When NULL represents failure, !x is commonly used. This was done using Coccinelle: @@ expression *e; identifier l1; @@ e = \(kmalloc\|kzalloc\|kcalloc\|devm_kzalloc\)(...); ... - e == NULL + !e Signed-off-by:
-
simran singhal authored
Some functions like kmalloc/kzalloc return NULL on failure. When NULL represents failure, !x is commonly used. This was done using Coccinelle: @@ expression *e; identifier l1; @@ e = \(kmalloc\|kzalloc\|kcalloc\|devm_kzalloc\)(...); ... - e == NULL + !e Signed-off-by:
-
Greg Kroah-Hartman authored
Remove the odd './' usage in the Makefile to make the build output a bit more sane looking and match the normal kernel build style. Cc: Alan Cox <alan@linux.intel.com> Signed-off-by: -
Alan Cox authored
These are not relevant to an upstream kernel driver. Signed-off-by:
Alan Cox <alan@linux.intel.com> Signed-off-by:
-
Alan Cox authored
This is not used on either Baytrail or Cherrytrail so can simply be deleted Signed-off-by:
-
Alan Cox authored
The FWNAME define is never used so can be removed. The option to skip firmware loading isn't really Cherrytrail specific so remove this and complete the merging of the two driver versions for this file. Signed-off-by:
-
Alan Cox authored
We can do this because the only thing it is used for is identifying the platform for power management purposes. The driver only supports Baytrail and Cherrytrail and both of those always need the IPU to be power managed directly not via PCI D3 states. Signed-off-by:
-
Alan Cox authored
We are not going to be building for anything but Linux so the code bracketed by C_RUN is not used and not needed. Signed-off-by:
-
Alan Cox authored
We are only going to be building for Linux with gcc, so we can lose bits of material related to other build targets. Signed-off-by:
-
Alan Cox authored
KLOCWORK is never defined so we can remove the workarounds for this in the code. Signed-off-by:
-
Alan Cox authored
This is another define which is never used and references a header that doesn't exist, so consider it dead. Our memcpy is pretty smart anyway. Signed-off-by:
-
Gargi Sharma authored
This patch removes multiple assignments by factorizing them. This was done with Coccinelle for the if branch. For the else part the change was done manually. Braces were also added to the else part to remove the checkpatch warning, "braces should be on all arms of if-else statements". @ identifier i1,i2; constant c; @@ - i1=i2=c; + i1=c; + i2=c; Signed-off-by:
Gargi Sharma <gs051095@gmail.com> Signed-off-by:
-
simran singhal authored
Remove typdef phy_ofdm_rx_status_rxsc_sgien_exintfflag and replace its uses in the code. Signed-off-by:
Julia Lawall <julia.lawall@lip6.fr> Signed-off-by:
-
Gargi Sharma authored
Replace comparsions between three expressions using two min macros with min3 macro. Done using Coccinelle Script: @@ expression e1; expression e2; expression e3; @@ ( - min(min(e1, e2), e3) + min3(e1, e2, e3) | - min(e1, min(e2, e3)) + min3(e1, e2, e3) ) Signed-off-by:
-
Tobin C. Harding authored
TODO file contains task to verify and correct function return sites. Need to check for and implement correct usage of goto's when there is work to be done before returning. Remove task from TODO list after already having completed audit of directory drivers/staging/dgnc. Signed-off-by:
Tobin C. Harding <me@tobin.cc> Signed-off-by:
-
Tobin C. Harding authored
TODO file requests fix up of error handling. Audit dgnc_mgmt.c and fix all return paths to be uniform and inline with kernel coding style. Signed-off-by:
-
Tobin C. Harding authored
TODO file requests fix up of error handling. Audit dgnc_mgmt.c and fix all return paths to be uniform and inline with kernel coding style. Signed-off-by:
-
Tobin C. Harding authored
TODO file requests fix up of error handling. Audit dgnc_driver.c and fix all return paths to be uniform and inline with kernel coding style. Signed-off-by:
-
