- 12 Aug, 2010 6 commits
-
-
Florian Zumbiehl authored
parisc __ioremap(): fix off-by-one error in page alignment of allocation size for sizes where size%PAGE_SIZE==1. Signed-off-by:
Florian Zumbiehl <florz@florz.de> Cc: Kyle McMartin <kyle@mcmartin.ca> Acked-by:
Helge Deller <deller@gmx.de> Tested-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Roel Kluin authored
Don't dereference vma if it's NULL. Signed-off-by:
Roel Kluin <roel.kluin@gmail.com> Cc: Chen Liqin <liqin.chen@sunplusct.com> Cc: Lennox Wu <lennox.wu@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Randy Dunlap authored
Fix kconfig dependency warning for PC8736x_GPIO by restricting it to X86_32. warning: (SCx200_GPIO && SCx200 || PC8736x_GPIO && X86) selects NSC_GPIO which has unmet direct dependencies (X86_32) NSC_GPIO is X86_32 only. The other driver (SCx200_GPIO) that selects NSC_GPIO is X86_32 only (indirectly, since SCx200 depends on X86_32), so limit this driver also. Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Cc: Jordan Crouse <jordan.crouse@amd.com> Cc: Jim Cromie <jim.cromie@gmail.com> Signed-off-by:
-
Randy Dunlap authored
Fix a fatal kernel-doc error due to a #define coming between a function's kernel-doc notation and the function signature. (kernel-doc cannot handle this) Signed-off-by:
-
Thomas Gleixner authored
The ACPI_PREEMPTION_POINT() logic was introduced in commit 8bd108d1 (ACPICA: add preemption point after each opcode parse). The follow up commits abe1dfab, 138d1569, c084ca70 tried to fix the preemption logic back and forth, but nobody noticed that the usage of in_atomic_preempt_off() in that context is wrong. The check which guards the call of cond_resched() is: if (!in_atomic_preempt_off() && !irqs_disabled()) in_atomic_preempt_off() is not intended for general use as the comment above the macro definition clearly says: * Check whether we were atomic before we did preempt_disable(): * (used by the scheduler, *after* releasing the kernel lock) On a CONFIG_PREEMPT=n kernel the usage of in_atomic_preempt_off() works by accident, but with CONFIG_PREEMPT=y it's just broken. The whole purpose of the ACPI_PREEMPTION_POINT() is to reduce the latency on a CONFIG_PREEMPT=n kernel, so make ACPI_PREEMPTION_POINT() depend on CONFIG_PREEMPT=n and remove the in_atomic_preempt_off() check. Addresses https://bugzilla.kernel.org/show_bug.cgi?id=16210 [akpm@linux-foundation.org: fix build] Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Len Brown <lenb@kernel.org> Cc: Francois Valenduc <francois.valenduc@tvcablenet.be> Cc: Lin Ming <ming.m.lin@intel.com> Cc: <stable@kernel.org> Signed-off-by:
-
Stefani Seibold authored
The current kfifo scatterlist implementation will not work with chained scatterlists. It assumes that struct scatterlist arrays are allocated contiguously, which is not the case when chained scatterlists (struct sg_table) are in use. Signed-off-by:
Stefani Seibold <stefani@seibold.net> Signed-off-by:
-
- 11 Aug, 2010 34 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: isofs: Fix lseek() to position beyond 4 GB vfs: remove unused MNT_STRICTATIME vfs: show unreachable paths in getcwd and proc vfs: only add " (deleted)" where necessary vfs: add prepend_path() helper vfs: __d_path: dont prepend the name of the root dentry ia64: perfmon: add d_dname method vfs: add helpers to get root and pwd cachefiles: use path_get instead of lone dget fs/sysv/super.c: add support for non-PDP11 v7 filesystems V7: Adjust sanity checks for some volumes Add v7 alias v9fs: fixup for inode_setattr being removed Manual merge to take Al's version of the fs/sysv/super.c file: it merged cleanly, but Al had removed an unnecessary header include, so his side was better.
-
git://git.kernel.org/pub/scm/linux/kernel/git/pkl/squashfs-linusLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/pkl/squashfs-linus: Squashfs: fix checkpatch.pl warnings Squashfs: fix filename typo Squashfs: update Kconfig and documentation for LZO Squashfs: fix block size use in LZO decompressor Squashfs: Add LZO compression support squashfs: fix filename in header comment Squashfs: Make XATTR config name consistent with other file systems squashfs: fix compiler inline warning
-
git://git.open-osd.org/linux-open-osdLinus Torvalds authored
* 'for-linus' of git://git.open-osd.org/linux-open-osd: exofs: Fix groups code when num_devices is not divisible by group_width exofs: Remove useless optimization exofs: exofs_file_fsync and exofs_file_flush correctness exofs: Remove superfluous dependency on buffer_head and writeback
-
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-clientLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (39 commits) ceph: generalize mon requests, add pool op support ceph: only queue async writeback on cap revocation if there is dirty data ceph: do not ignore osd_idle_ttl mount option ceph: constify dentry_operations ceph: whitespace cleanup ceph: add flock/fcntl lock support ceph: define on-wire types, constants for file locking support ceph: add CEPH_FEATURE_FLOCK to the supported feature bits ceph: support v2 reconnect encoding ceph: support v2 client_caps encoding ceph: move AES iv definition to shared header ceph: fix decoding of pool snap info ceph: make ->sync_fs not wait if wait==0 ceph: warn on missing snap realm ceph: print useful error message when crush rule not found ceph: use %pU to print uuid (fsid) ceph: sync header defs with server code ceph: clean up header guards ceph: strip misleading/obsolete version, feature info ceph: specify supported features in super.h ...
-
git://codeaurora.org/quic/kernel/dwalker/linux-msmLinus Torvalds authored
* 'msm-video' of git://codeaurora.org/quic/kernel/dwalker/linux-msm: video: msm: Fix section mismatch in mddi.c. drivers: video: msm: drop some unused variables
-
git://git.kernel.org/pub/scm/linux/kernel/git/chris/linux-2.6Linus Torvalds authored
* 'ixp4xx' of git://git.kernel.org/pub/scm/linux/kernel/git/chris/linux-2.6: IXP4xx: Fix LL debugging on little-endian CPU. IXP4xx: Fix sparse warnings in I/O primitives. IXP4xx: Make mdio_bus struct static in the Ethernet driver. IXP4xx: Fix ixp4xx_crypto little-endian operation. IXP4xx: Prevent HSS transmitter lockup by disabling FRaMe signals. ixp4xx/vulcan: add PCI support ixp4xx: base support for Arcom Vulcan
-
Linus Torvalds authored
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (226 commits) ARM: 6323/1: cam60: don't use __init for cam60_spi_{flash_platform_data,partitions} ARM: 6324/1: cam60: move cam60_spi_devices to .init.data ARM: 6322/1: imx/pca100: Fix name of spi platform data ARM: 6321/1: fix syntax error in main Kconfig file ARM: 6297/1: move U300 timer to dynamic clock lookup ARM: 6296/1: clock U300 intcon and timer properly ARM: 6295/1: fix U300 apb_pclk split ARM: 6306/1: fix inverted MMC card detect in U300 ARM: 6299/1: errata: TLBIASIDIS and TLBIMVAIS operations can broadcast a faulty ASID ARM: 6294/1: etm: do a dummy read from OSSRR during initialization ARM: 6292/1: coresight: add ETM management registers ARM: 6288/1: ftrace: document mcount formats ARM: 6287/1: ftrace: clean up mcount assembly indentation ARM: 6286/1: fix Thumb-2 decompressor broken by "Auto calculate ZRELADDR" ARM: 6281/1: video/imxfb.c: allow usage without BACKLIGHT_CLASS_DEVICE ARM: 6280/1: imx: Fix build failure when including <mach/gpio.h> without <linux/spinlock.h> ARM: S5PV210: Fix on missing s3c-sdhci card detection method for hsmmc3 ARM: S5P: Fix on missing S5P_DEV_FIMC in plat-s5p/Kconfig ARM: S5PV210: Override FIMC driver name on Aquila board ARM: S5PC100: enable FIMC on SMDKC100 ... Fix up conflicts in arch/arm/mach-{s5pc100,s5pv210}/cpu.c due to different subsystem 'setname' calls, and trivial port types in include/linux/serial_core.h -
Prarit Bhargava authored
Fix checkstack error: lib/decompress_bunzip2.c: In function `get_next_block': lib/decompress_bunzip2.c:511: warning: the frame size of 1932 bytes is larger than 1024 bytes byteCount, symToByte, and mtfSymbol cannot be declared static or allocated dynamically so place them in the bunzip_data struct. Signed-off-by:
Prarit Bhargava <prarit@redhat.com> Cc: Phillip Lougher <phillip@lougher.demon.co.uk> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by:
-
Stefani Seibold authored
Add four examples to the kernel sample directory. It shows how to handle: - a byte stream fifo - a integer type fifo - a dynamic record sized fifo - the fifo DMA functions [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
-
Stefani Seibold authored
Simply replace the whole kfifo.c and kfifo.h files with the new generic version and fix the kerneldoc API template file. Signed-off-by:
-
Stefani Seibold authored
Add the new version of the kfifo API files kfifo.c and kfifo.h. Signed-off-by:
-
Stefani Seibold authored
There are different types of a fifo which can not handled in C without a lot of overhead. So i decided to write the API as a set of macros, which is the only way to do a kind of template meta programming without C++. This macros handles the different types of fifos in a transparent way. There are a lot of benefits: - Compile time handling of the different fifo types - Better performance (a save put or get of an integer does only generate 9 assembly instructions on a x86) - Type save - Cleaner interface, the additional kfifo_..._rec() functions are gone - Easier to use - Less error prone - Different types of fifos: it is now possible to define a int fifo or any other type. See below for an example. - Smaller footprint for none byte type fifos - No need of creating a second hidden variable, like in the old DEFINE_KFIFO The API was not changed. There are now real in place fifos where the data space is a part of the structure. The fifo needs now 20 byte plus the fifo space. Dynamic assigned or allocated create a little bit more code. Most of the macros code will be optimized away and simple generate a function call. Only the really small one generates inline code. Additionally you can now create fifos for any data type, not only the "unsigned char" byte streamed fifos. There is also a new kfifo_put and kfifo_get function, to handle a single element in a fifo. This macros generates inline code, which is lit bit larger but faster. I know that this kind of macros are very sophisticated and not easy to maintain. But i have all tested and it works as expected. I analyzed the output of the compiler and for the x86 the code is as good as hand written assembler code. For the byte stream fifo the generate code is exact the same as with the current kfifo implementation. For all other types of fifos the code is smaller before, because the interface is easier to use. The main goal was to provide an API which is very intuitive, save and easy to use. So linux will get now a powerful fifo API which provides all what a developer needs. This will save in the future a lot of kernel space, since there is no need to write an own implementation. Most of the device driver developers need a fifo, and also deep kernel development will gain benefit from this API. Here are the results of the text section usage: Example 1: kfifo_put/_get kfifo_in/out current kfifo dynamic allocated 0x000002a8 0x00000291 0x00000299 in place 0x00000291 0x0000026e 0x00000273 kfifo.c new old text section size 0x00000be5 0x000008b2 As you can see, kfifo_put/kfifo_get creates a little bit more code than kfifo_in/kfifo_out, but it is much faster (the code is inline). The code is complete hand crafted and optimized. The text section size is as small as possible. You get all the fifo handling in only 3 kb. This includes type safe fix size records, dynamic records and DMA handling. This should be the final version. All requested features are implemented. Note: Most features of this API doesn't have any users. All functions which are not used in the next 9 months will be removed. So, please adapt your drivers and other sources as soon as possible to the new API and post it. This are the features which are currently not used in the kernel: kfifo_to_user() kfifo_from_user() kfifo_dma_....() macros kfifo_esize() kfifo_recsize() kfifo_put() kfifo_get() The fixed size record elements, exclude "unsigned char" fifo's and the variable size records fifo's This patch: User of the kernel fifo should never bypass the API and directly access the fifo structure. Otherwise it will be very hard to maintain the API. Signed-off-by: -
Robert P. J. Day authored
For consistency with other kfifo routines, return bool, not int. Signed-off-by:
Robert P. J. Day <rpjday@crashcourse.ca> Cc: Stefani Seibold <stefani@seibold.net> Signed-off-by:
-
Lubomir Rintel authored
This adds byte order autodetection (of PDP-11 and LE filesystems). No attempt is made to detect big-endian filesystems -- were there any? Tested with PDP-11 v7 filesystems and PC-IX maintenance floppy. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
Lubomir Rintel <lkundrak@v3.sk> Cc: Christoph Hellwig <hch@lst.de> Cc: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by:
-
Lubomir Rintel authored
Newly mkfs-ed filesystems from Seventh Edition have last modification time set to zero, but are otherwise perfectly valid. Also, tighten up other sanity checks to filter out most filesystems with [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
-
Lubomir Rintel authored
So that the module gets autoloaded when a v7 filesystem is mounted. Signed-off-by:
-
Dan Carpenter authored
copy_to/from_user() returns the number of bytes remaining to be copied. It never returns a negative value. The correct return code is -EFAULT and not -EIO. All the callers check for non-zero returns so that's Ok, but the return code is passed to the user so we should fix this. Signed-off-by:
Dan Carpenter <error27@gmail.com> Cc: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Simon Kagstrom <simon.kagstrom@netinsight.net> Acked-by:
WANG Cong <xiyou.wangcong@gmail.com> Signed-off-by:
-
Fr?d?ric Bri?re authored
Commit 51dcdfec ("parport: Use the PCI IRQ if offered") added IRQ support for PCI parallel port devices handled by parport_pc, but turned it off for parport_serial, despite a printk() message to the contrary. Signed-off-by:
Fr?d?ric Bri?re <fbriere@fbriere.net> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by:
-
Anton Blanchard authored
We are missing the oops end marker for the exception based WARN implementation in lib/bug.c. This is useful for logfile analysis tools. Signed-off-by:
Anton Blanchard <anton@samba.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Arjan van de Ven <arjan@infradead.org> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Signed-off-by:
-
Anton Blanchard authored
There are a few issues with the exception based WARN implementation in lib/bug.c: - Inconsistent printk flags. The "cut here" line is printed at KERN_EMERG, so the console and all logged in users see the single line: ------------[ cut here ]------------ for each WARN. Fix this so we print everything at KERN_WARNING to match the kernel/panic.c version. - The lib/bug.c WARN would print "Badness at". Change it to match the kernel/panic.c version which prints "WARNING: at". - Print the list of modules, similar to kernel/panic.c of modules, similar to kernel/panic.c [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
-
TAMUKI Shoichi authored
To keep panic_timeout accuracy when running under a hypervisor, the current implementation only spins on long time (1 second) calls to mdelay. That brings a good effect, but the problem is the keyboard LEDs don't blink at all on that situation. This patch changes to call to panic_blink_enter() between every mdelay and keeps blinking in spite of long spin timer mode. The time to call to mdelay is now 100ms. Even this change will keep panic_timeout accuracy enough when running under a hypervisor. Signed-off-by:
TAMUKI Shoichi <tamuki@linet.gr.jp> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Russell King <linux@arm.linux.org.uk> Acked-by:
Dmitry Torokhov <dtor@mail.ru> Cc: Anton Blanchard <anton@samba.org> Signed-off-by:
-
Dan Carpenter authored
We can clean up the work queue on this error path. This function is called from afs_init(). Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
FUJITA Tomonori authored
DMA_xxBIT_MASK macros were marked as deprecated in June 2009. One more year is long enough, I think. Signed-off-by:
FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by:
-
FUJITA Tomonori authored
It was replaced with the DMA unamp state API (which can be used for any bus). Signed-off-by:
-
FUJITA Tomonori authored
Signed-off-by:
-
FUJITA Tomonori authored
Architectures implement dma_is_consistent() in different ways (some misinterpret the definition of API in DMA-API.txt). So it hasn't been so useful for drivers. We have only one user of the API in tree. Unlikely out-of-tree drivers use the API. Even if we fix dma_is_consistent() in some architectures, it doesn't look useful at all. It was invented long ago for some old systems that can't allocate coherent memory at all. It's better to export only APIs that are definitely necessary for drivers. Let's remove this API. Signed-off-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by:
-
FUJITA Tomonori authored
This driver is the only user of dma_is_consistent(). We plan to remove this API. The driver uses the API in the following way: BUG_ON(!dma_is_consistent(hostdata->dev, pScript) && L1_CACHE_BYTES < dma_get_cache_alignment()); The above code tries to see if L1_CACHE_BYTES is greater than dma_get_cache_alignment() on sysmtes that can not allocate coherent memory (some old systems can't). James Bottomley exmplained that this is necesary because the driver packs the set of mailboxes into a single coherent area and separates the different usages by a L1 cache stride. So it's fatal if the dma He also pointed out that we can kill this checking because we don't hit this BUG_ON on all architectures that actually use the driver. (akpm: stolen from the scsi tree because dma-mapping-remove-dma_is_consistent-api.patch needs it) Signed-off-by:
James Bottomley <James.Bottomley@suse.de> Signed-off-by:
-
FUJITA Tomonori authored
Architectures that handle DMA-non-coherent memory need to set ARCH_DMA_MINALIGN to make sure that kmalloc'ed buffer is DMA-safe: the buffer doesn't share a cache with the others. Signed-off-by:
-
FUJITA Tomonori authored
dma_get_cache_alignment returns the minimum DMA alignment. Architectures defines it as ARCH_DMA_MINALIGN (formally ARCH_KMALLOC_MINALIGN). So we can unify dma_get_cache_alignment implementations. Note that some architectures implement dma_get_cache_alignment wrongly. dma_get_cache_alignment() should return the minimum DMA alignment. So fully-coherent architectures should return 1. This patch also fixes this issue. Signed-off-by:
-
FUJITA Tomonori authored
Now each architecture has the own dma_get_cache_alignment implementation. dma_get_cache_alignment returns the minimum DMA alignment. Architectures define it as ARCH_KMALLOC_MINALIGN (it's used to make sure that malloc'ed buffer is DMA-safe; the buffer doesn't share a cache with the others). So we can unify dma_get_cache_alignment implementations. This patch: dma_get_cache_alignment() needs to know if an architecture defines ARCH_KMALLOC_MINALIGN or not (needs to know if architecture has DMA alignment restriction). However, slab.h define ARCH_KMALLOC_MINALIGN if architectures doesn't define it. Let's rename ARCH_KMALLOC_MINALIGN to ARCH_DMA_MINALIGN. ARCH_KMALLOC_MINALIGN is used only in the internals of slab/slob/slub (except for crypto). Signed-off-by:
-
Anton Vorontsov authored
Simply add proper IDs into the device table. Signed-off-by:
Anton Vorontsov <avorontsov@mvista.com> Cc: Scott Wood <scottwood@freescale.com> Cc: Peter Tyser <ptyser@xes-inc.com> Cc: Dave Jiang <djiang@mvista.com> Cc: Doug Thompson <dougthompson@xmission.com> Signed-off-by:
-
Kulikov Vasiliy authored
-EIO is not the only error code that pci_enable_device() may return, also the set of errors can be enhanced in future. We should compare return code with zero, not with concrete error value. Signed-off-by:
Kulikov Vasiliy <segooon@gmail.com> Acked-by:
Mauro Carvalho Chehab <mchehab@redhat.com> Cc: Jeff Roberson <jroberson@jroberson.net> Cc: Doug Thompson <dougthompson@xmission.com> Signed-off-by:
-
Kulikov Vasiliy authored
-EIO is not the only error code that pci_enable_device() may return, also the set of errors can be enhanced in future. We should compare return code with zero, not with concrete error value. Signed-off-by:
-
Christoph Egger authored
In 5753c082 ("powerpc/85xx: Kconfig cleanup") menuconfig MPC85xx was replaced by FSL_SOC_BOOKE but some references insider the code were not adjusted accordingly. This patch adresses these missing pieces. Signed-off-by:
Christoph Egger <siccegge@cs.fau.de> Cc: Doug Thompson <dougthompson@xmission.com> Cc: Peter Tyser <ptyser@xes-inc.com> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Scott Wood <scottwood@freescale.com> Signed-off-by:
-
