- 13 Oct, 2017 5 commits
-
-
Shashank Sharma authored
We read the dp dual mode Adapter identifier to detect the LSPCON device. It's been observed from the CI testing that in few cases, this read can get delayed or fail. For such scenarios, LSPCON vendors suggest to retry the read operation. This patch adds retry in the probe function, while reading LSPCON identifier. V3: added this patch in the series Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102294 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102295 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102359 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103186 Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Imre Deak <imre.deak@intel.com> Signed-off-by:
Shashank Sharma <shashank.sharma@intel.com> Reviewed-by:
Imre Deak <imre.deak@intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1507630064-17908-4-git-send-email-shashank.sharma@intel.com
-
Shashank Sharma authored
Our current logic to read LSPCON's current mode, stops retries and breaks wait-loop, if it gets LSPCON_MODE_INVALID as return from the core function. This doesn't allow us to try reading the mode again. This patch removes this condition and allows retries reading the currnt mode until timeout. This also fixes/prevents some of the noise in form of debug messages while running IGT CI test cases. V2: rebase, added r-b V2: changed some debug message levels from debug->error and error->debug in lspcon_get_current_mode function. V3: Rebase Cc: Imre Deak <imre.deak@intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102294 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102295 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102359 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103186Reviewed-by:Mahesh Kumar <Mahesh1.kumar@intel.com> Signed-off-by:
-
Shashank Sharma authored
From the CI builds, its been observed that during a driver reload/insert, dp dual mode read function sometimes fails to read from LSPCON device over i2c-over-aux channel. This patch: - adds some delay and few retries, allowing a scope for these devices to settle down and respond. - changes one error log's level from ERROR->DEBUG as we want to call it an error only after all the retries are exhausted. V2: Addressed review comments from Jani (for loop for retry) V3: Addressed review comments from Imre (break on partial read too) V3: Addressed review comments from Ville/Imre (Add the retries exclusively for LSPCON, not for all dp_dual_mode devices) V4: Added r-b from Imre, sending it to dri-devel (Jani) Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102294 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102295 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102359 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103186 Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Reviewed-by:Dave Airlie <airlied@gmail.com> Signed-off-by:
-
James Ausmus authored
Per BSpec, 400us is "BDW+ Do not use this setting." - not just PORT_A. Set BDW to 600us unconditionally. v2: -Split in to two patches (Rodrigo) Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
James Ausmus <james.ausmus@intel.com> Reviewed-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
-
James Ausmus authored
Rename DP_AUX_CH_CTL_TIME_OUT_1600us to DP_AUX_CH_CTL_TIME_OUT_MAX, as the meaning of the (3 << 26) value varies per platform, but it's always the maximum timeout for that platform. Pre-CNL it means 1600us, and for CNL it means 3200us. v2: -Split in to two patches (Rodrigo) Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
-
- 12 Oct, 2017 7 commits
-
-
Chris Wilson authored
A bug recently encountered involved the issue where are we were submitting requests to different ppGTT, each would pin a segment of the GGTT for its logical context and ring. However, this is invisible to eviction as we do not tie the context/ring VMA to a request and so do not automatically wait upon it them (instead they are marked as pinned, preventing eviction entirely). Instead the eviction code must flush those contexts by switching to the kernel context. This selftest tries to fill the GGTT with contexts to exercise a path where the switch-to-kernel-context failed to make forward progress and we fail with ENOSPC. v2: Make the hole in the filled GGTT explicit. v3: Swap out the arbitrary timeout for a private notification from i915_gem_evict_something() Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171012125726.14736-3-chris@chris-wilson.co.ukReviewed-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com>
-
Chris Wilson authored
For some selftests, we want to issue requests but delay them going to hardware. Furthermore, we don't want those requests to block indefinitely (or else we may hang the driver and block testing) so we want to employ a timeout. So naturally we want a fence that is automatically signaled by a timer. v2: Add kselftests. v3: Limit the API available to selftests; there isn't an overwhelming reason to export it universally. Signed-off-by:
-
Chris Wilson authored
In the full-ppgtt world, we can fill the GGTT full of context objects. These context objects are currently implicitly tracked by the requests that pin them i.e. they are only unpinned when the request is completed and retired, but we do not have the link from the vma to the request (anymore). In order to unpin those contexts, we have to issue another request and wait upon the switch to the kernel context. The bug during eviction was that we assumed that a full GGTT meant we would have requests on the GGTT timeline, and so we missed situations where those requests where merely in flight (and when even they have not yet been submitted to hw yet). The fix employed here is to change the already-is-idle test to no look at the execution timeline, but count the outstanding requests and then check that we have switched to the kernel context. Erring on the side of overkill here just means that we stall a little longer than may be strictly required, but we only expect to hit this path in extreme corner cases where returning an erroneous error is worse than the delay. v2: Logical inversion when swapping over branches. Fixes: 80b204bc ("drm/i915: Enable multiple timelines") Signed-off-by:
-
Ville Syrjälä authored
Add the minimal amount of PSR tracking into the crtc state. This allows precomputing the possibility of using PSR correctly, and it means we can safely call the psr enable/disable functions for any DP endcoder. As a nice bonus we get rid of some more crtc->config usage, which we want to kill off eventually. v2: Fix 'goto unlock' fail in intel_psr_enable() (Jani) Check intel_dp_is_edp() in is_edp_psr() (Jani) Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by:Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171012130201.21318-1-ville.syrjala@linux.intel.comReviewed-by:
-
Jani Nikula authored
Signed-off-by: -
Joonas Lahtinen authored
Remove dead code around has_aliasing_ppgtt condition. Suggested-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
-
Chris Wilson authored
Purely to silence lockdep, as we know that no bo can exist at this time and so the inversion is impossible. Nevertheless, lockdep currently warns on unload: [ 137.522565] WARNING: possible circular locking dependency detected [ 137.522568] 4.14.0-rc4-CI-CI_DRM_3209+ #1 Tainted: G U [ 137.522570] ------------------------------------------------------ [ 137.522572] drv_module_relo/1532 is trying to acquire lock: [ 137.522574] ("i915-userptr-acquire"){+.+.}, at: [<ffffffff8109a831>] flush_workqueue+0x91/0x540 [ 137.522581] but task is already holding lock: [ 137.522583] (&dev->struct_mutex){+.+.}, at: [<ffffffffa014fb3f>] i915_gem_fini+0x3f/0xc0 [i915] [ 137.522605] which lock already depends on the new lock. [ 137.522608] the existing dependency chain (in reverse order) is: [ 137.522611] -> #3 (&dev->struct_mutex){+.+.}: [ 137.522615] __lock_acquire+0x1420/0x15e0 [ 137.522618] lock_acquire+0xb0/0x200 [ 137.522621] __mutex_lock+0x86/0x9b0 [ 137.522623] mutex_lock_interruptible_nested+0x1b/0x20 [ 137.522640] i915_mutex_lock_interruptible+0x51/0x130 [i915] [ 137.522657] i915_gem_fault+0x20b/0x720 [i915] [ 137.522660] __do_fault+0x1e/0x80 [ 137.522662] __handle_mm_fault+0xa08/0xed0 [ 137.522664] handle_mm_fault+0x156/0x300 [ 137.522666] __do_page_fault+0x2c5/0x570 [ 137.522668] do_page_fault+0x28/0x250 [ 137.522671] page_fault+0x22/0x30 [ 137.522672] -> #2 (&mm->mmap_sem){++++}: [ 137.522677] __lock_acquire+0x1420/0x15e0 [ 137.522679] lock_acquire+0xb0/0x200 [ 137.522682] down_read+0x3e/0x70 [ 137.522699] __i915_gem_userptr_get_pages_worker+0x141/0x240 [i915] [ 137.522701] process_one_work+0x233/0x660 [ 137.522704] worker_thread+0x4e/0x3b0 [ 137.522706] kthread+0x152/0x190 [ 137.522708] ret_from_fork+0x27/0x40 [ 137.522710] -> #1 ((&work->work)){+.+.}: [ 137.522714] __lock_acquire+0x1420/0x15e0 [ 137.522717] lock_acquire+0xb0/0x200 [ 137.522719] process_one_work+0x206/0x660 [ 137.522721] worker_thread+0x4e/0x3b0 [ 137.522723] kthread+0x152/0x190 [ 137.522725] ret_from_fork+0x27/0x40 [ 137.522727] -> #0 ("i915-userptr-acquire"){+.+.}: [ 137.522731] check_prev_add+0x430/0x840 [ 137.522733] __lock_acquire+0x1420/0x15e0 [ 137.522735] lock_acquire+0xb0/0x200 [ 137.522738] flush_workqueue+0xb4/0x540 [ 137.522740] drain_workqueue+0xd4/0x1b0 [ 137.522742] destroy_workqueue+0x1c/0x200 [ 137.522758] i915_gem_cleanup_userptr+0x15/0x20 [i915] [ 137.522770] i915_gem_fini+0x5f/0xc0 [i915] [ 137.522782] i915_driver_unload+0x122/0x180 [i915] [ 137.522794] i915_pci_remove+0x19/0x30 [i915] [ 137.522797] pci_device_remove+0x39/0xb0 [ 137.522800] device_release_driver_internal+0x15d/0x220 [ 137.522803] driver_detach+0x40/0x80 [ 137.522805] bus_remove_driver+0x58/0xd0 [ 137.522807] driver_unregister+0x2c/0x40 [ 137.522809] pci_unregister_driver+0x36/0xb0 [ 137.522828] i915_exit+0x1a/0x8b [i915] [ 137.522831] SyS_delete_module+0x18c/0x1e0 [ 137.522834] entry_SYSCALL_64_fastpath+0x1c/0xb1 [ 137.522835] other info that might help us debug this: [ 137.522838] Chain exists of: "i915-userptr-acquire" --> &mm->mmap_sem --> &dev->struct_mutex [ 137.522844] Possible unsafe locking scenario: [ 137.522846] CPU0 CPU1 [ 137.522848] ---- ---- [ 137.522850] lock(&dev->struct_mutex); [ 137.522852] lock(&mm->mmap_sem); [ 137.522854] lock(&dev->struct_mutex); [ 137.522857] lock("i915-userptr-acquire"); [ 137.522859] *** DEADLOCK *** [ 137.522862] 3 locks held by drv_module_relo/1532: [ 137.522864] #0: (&dev->mutex){....}, at: [<ffffffff8161d47b>] device_release_driver_internal+0x2b/0x220 [ 137.522869] #1: (&dev->mutex){....}, at: [<ffffffff8161d489>] device_release_driver_internal+0x39/0x220 [ 137.522873] #2: (&dev->struct_mutex){+.+.}, at: [<ffffffffa014fb3f>] i915_gem_fini+0x3f/0xc0 [i915] [ 137.522888] stack backtrace: [ 137.522891] CPU: 0 PID: 1532 Comm: drv_module_relo Tainted: G U 4.14.0-rc4-CI-CI_DRM_3209+ #1 [ 137.522894] Hardware name: /NUC7i5BNB, BIOS BNKBL357.86A.0048.2017.0704.1415 07/04/2017 [ 137.522897] Call Trace: [ 137.522900] dump_stack+0x68/0x9f [ 137.522902] print_circular_bug+0x235/0x3c0 [ 137.522905] ? lockdep_init_map_crosslock+0x20/0x20 [ 137.522908] check_prev_add+0x430/0x840 [ 137.522919] ? i915_gem_fini+0x5f/0xc0 [i915] [ 137.522922] ? __kernel_text_address+0x12/0x40 [ 137.522925] ? __save_stack_trace+0x66/0xd0 [ 137.522928] __lock_acquire+0x1420/0x15e0 [ 137.522930] ? __lock_acquire+0x1420/0x15e0 [ 137.522933] ? lockdep_init_map_crosslock+0x20/0x20 [ 137.522936] ? __this_cpu_preempt_check+0x13/0x20 [ 137.522938] lock_acquire+0xb0/0x200 [ 137.522940] ? flush_workqueue+0x91/0x540 [ 137.522943] flush_workqueue+0xb4/0x540 [ 137.522945] ? flush_workqueue+0x91/0x540 [ 137.522948] ? __mutex_unlock_slowpath+0x43/0x2c0 [ 137.522951] ? trace_hardirqs_on_caller+0xe3/0x1b0 [ 137.522954] drain_workqueue+0xd4/0x1b0 [ 137.522956] ? drain_workqueue+0xd4/0x1b0 [ 137.522958] destroy_workqueue+0x1c/0x200 [ 137.522975] i915_gem_cleanup_userptr+0x15/0x20 [i915] [ 137.522987] i915_gem_fini+0x5f/0xc0 [i915] [ 137.523000] i915_driver_unload+0x122/0x180 [i915] [ 137.523015] i915_pci_remove+0x19/0x30 [i915] [ 137.523018] pci_device_remove+0x39/0xb0 [ 137.523021] device_release_driver_internal+0x15d/0x220 [ 137.523023] driver_detach+0x40/0x80 [ 137.523026] bus_remove_driver+0x58/0xd0 [ 137.523028] driver_unregister+0x2c/0x40 [ 137.523030] pci_unregister_driver+0x36/0xb0 [ 137.523049] i915_exit+0x1a/0x8b [i915] [ 137.523052] SyS_delete_module+0x18c/0x1e0 [ 137.523055] entry_SYSCALL_64_fastpath+0x1c/0xb1 [ 137.523057] RIP: 0033:0x7f7bd0609287 [ 137.523059] RSP: 002b:00007ffef694bc18 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0 [ 137.523062] RAX: ffffffffffffffda RBX: ffffffff81493f33 RCX: 00007f7bd0609287 [ 137.523065] RDX: 0000000000000001 RSI: 0000000000000800 RDI: 0000564f999f9fc8 [ 137.523067] RBP: ffffc90005c4ff88 R08: 0000000000000000 R09: 0000000000000080 [ 137.523069] R10: 00007f7bd20ef8c0 R11: 0000000000000246 R12: 0000000000000000 [ 137.523072] R13: 00007ffef694be00 R14: 0000000000000000 R15: 0000000000000000 [ 137.523075] ? __this_cpu_preempt_check+0x13/0x20 Signed-off-by:Daniel Vetter <daniel.vetter@ffwll.ch>
-
- 11 Oct, 2017 17 commits
-
-
Jani Nikula authored
Get rid of redundant intel_dp_num_rates(). We can simply look at the rate and limit based on that. Cc: Manasi Navare <manasi.d.navare@intel.com> Reviewed-by: <manasi.d.navare@intel.com> Signed-off-by:
-
Jani Nikula authored
Turn intel_dp_source_supports_hbr2() into a simple helper to query the pre-filled source rates array, and move the conditions about which platforms support which rates to the single point of truth in intel_dp_set_source_rates(). This also reduces the code paths you have to think about in the source rates initialization in intel_dp_set_source_rates(), making it easier to grasp. Cc: Manasi Navare <manasi.d.navare@intel.com> Reviewed-by:
Manasi Navare <manasi.d.navare@intel.com> Signed-off-by:
-
Ville Syrjälä authored
With intel_encoder_current_mode() using the normal state readout code it actually works on PCH platforms as well. So let's nuke the PCH check from intel_lvds_init(). I suppose there aren't any machines that actually need this, but at least we get to eliminate a few lines of code, and one FIXME. Signed-off-by:
-
Ville Syrjälä authored
Reuse the normal state readout code to get the fixed mode for LVDS/DVO encoders. This removes some partially duplicated state readout code from LVDS/DVO encoders. The duplicated code wasn't actually even populating the negative h/vsync flags, leading to possible state checker complaints. The normal readout code populates that stuff fully. Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
Daniel Vetter authored
stop_machine is not really a locking primitive we should use, except when the hw folks tell us the hw is broken and that's the only way to work around it. This patch tries to address the locking abuse of stop_machine() from commit 20e4933c Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Tue Nov 22 14:41:21 2016 +0000 drm/i915: Stop the machine as we install the wedged submit_request handler Chris said parts of the reasons for going with stop_machine() was that it's no overhead for the fast-path. But these callbacks use irqsave spinlocks and do a bunch of MMIO, and rcu_read_lock is _real_ fast. To stay as close as possible to the stop_machine semantics we first update all the submit function pointers to the nop handler, then call synchronize_rcu() to make sure no new requests can be submitted. This should give us exactly the huge barrier we want. I pondered whether we should annotate engine->submit_request as __rcu and use rcu_assign_pointer and rcu_dereference on it. But the reason behind those is to make sure the compiler/cpu barriers are there for when you have an actual data structure you point at, to make sure all the writes are seen correctly on the read side. But we just have a function pointer, and .text isn't changed, so no need for these barriers and hence no need for annotations. Unfortunately there's a complication with the call to intel_engine_init_global_seqno: - Without stop_machine we must hold the corresponding spinlock. - Without stop_machine we must ensure that all requests are marked as having failed with dma_fence_set_error() before we call it. That means we need to split the nop request submission into two phases, both synchronized with rcu: 1. Only stop submitting the requests to hw and mark them as failed. 2. After all pending requests in the scheduler/ring are suitably marked up as failed and we can force complete them all, also force complete by calling intel_engine_init_global_seqno(). This should fix the followwing lockdep splat: ====================================================== WARNING: possible circular locking dependency detected 4.14.0-rc3-CI-CI_DRM_3179+ #1 Tainted: G U ------------------------------------------------------ kworker/3:4/562 is trying to acquire lock: (cpu_hotplug_lock.rw_sem){++++}, at: [<ffffffff8113d4bc>] stop_machine+0x1c/0x40 but task is already holding lock: (&dev->struct_mutex){+.+.}, at: [<ffffffffa0136588>] i915_reset_device+0x1e8/0x260 [i915] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #6 (&dev->struct_mutex){+.+.}: __lock_acquire+0x1420/0x15e0 lock_acquire+0xb0/0x200 __mutex_lock+0x86/0x9b0 mutex_lock_interruptible_nested+0x1b/0x20 i915_mutex_lock_interruptible+0x51/0x130 [i915] i915_gem_fault+0x209/0x650 [i915] __do_fault+0x1e/0x80 __handle_mm_fault+0xa08/0xed0 handle_mm_fault+0x156/0x300 __do_page_fault+0x2c5/0x570 do_page_fault+0x28/0x250 page_fault+0x22/0x30 -> #5 (&mm->mmap_sem){++++}: __lock_acquire+0x1420/0x15e0 lock_acquire+0xb0/0x200 __might_fault+0x68/0x90 _copy_to_user+0x23/0x70 filldir+0xa5/0x120 dcache_readdir+0xf9/0x170 iterate_dir+0x69/0x1a0 SyS_getdents+0xa5/0x140 entry_SYSCALL_64_fastpath+0x1c/0xb1 -> #4 (&sb->s_type->i_mutex_key#5){++++}: down_write+0x3b/0x70 handle_create+0xcb/0x1e0 devtmpfsd+0x139/0x180 kthread+0x152/0x190 ret_from_fork+0x27/0x40 -> #3 ((complete)&req.done){+.+.}: __lock_acquire+0x1420/0x15e0 lock_acquire+0xb0/0x200 wait_for_common+0x58/0x210 wait_for_completion+0x1d/0x20 devtmpfs_create_node+0x13d/0x160 device_add+0x5eb/0x620 device_create_groups_vargs+0xe0/0xf0 device_create+0x3a/0x40 msr_device_create+0x2b/0x40 cpuhp_invoke_callback+0xc9/0xbf0 cpuhp_thread_fun+0x17b/0x240 smpboot_thread_fn+0x18a/0x280 kthread+0x152/0x190 ret_from_fork+0x27/0x40 -> #2 (cpuhp_state-up){+.+.}: __lock_acquire+0x1420/0x15e0 lock_acquire+0xb0/0x200 cpuhp_issue_call+0x133/0x1c0 __cpuhp_setup_state_cpuslocked+0x139/0x2a0 __cpuhp_setup_state+0x46/0x60 page_writeback_init+0x43/0x67 pagecache_init+0x3d/0x42 start_kernel+0x3a8/0x3fc x86_64_start_reservations+0x2a/0x2c x86_64_start_kernel+0x6d/0x70 verify_cpu+0x0/0xfb -> #1 (cpuhp_state_mutex){+.+.}: __lock_acquire+0x1420/0x15e0 lock_acquire+0xb0/0x200 __mutex_lock+0x86/0x9b0 mutex_lock_nested+0x1b/0x20 __cpuhp_setup_state_cpuslocked+0x53/0x2a0 __cpuhp_setup_state+0x46/0x60 page_alloc_init+0x28/0x30 start_kernel+0x145/0x3fc x86_64_start_reservations+0x2a/0x2c x86_64_start_kernel+0x6d/0x70 verify_cpu+0x0/0xfb -> #0 (cpu_hotplug_lock.rw_sem){++++}: check_prev_add+0x430/0x840 __lock_acquire+0x1420/0x15e0 lock_acquire+0xb0/0x200 cpus_read_lock+0x3d/0xb0 stop_machine+0x1c/0x40 i915_gem_set_wedged+0x1a/0x20 [i915] i915_reset+0xb9/0x230 [i915] i915_reset_device+0x1f6/0x260 [i915] i915_handle_error+0x2d8/0x430 [i915] hangcheck_declare_hang+0xd3/0xf0 [i915] i915_hangcheck_elapsed+0x262/0x2d0 [i915] process_one_work+0x233/0x660 worker_thread+0x4e/0x3b0 kthread+0x152/0x190 ret_from_fork+0x27/0x40 other info that might help us debug this: Chain exists of: cpu_hotplug_lock.rw_sem --> &mm->mmap_sem --> &dev->struct_mutex Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&dev->struct_mutex); lock(&mm->mmap_sem); lock(&dev->struct_mutex); lock(cpu_hotplug_lock.rw_sem); *** DEADLOCK *** 3 locks held by kworker/3:4/562: #0: ("events_long"){+.+.}, at: [<ffffffff8109c64a>] process_one_work+0x1aa/0x660 #1: ((&(&i915->gpu_error.hangcheck_work)->work)){+.+.}, at: [<ffffffff8109c64a>] process_one_work+0x1aa/0x660 #2: (&dev->struct_mutex){+.+.}, at: [<ffffffffa0136588>] i915_reset_device+0x1e8/0x260 [i915] stack backtrace: CPU: 3 PID: 562 Comm: kworker/3:4 Tainted: G U 4.14.0-rc3-CI-CI_DRM_3179+ #1 Hardware name: /NUC7i5BNB, BIOS BNKBL357.86A.0048.2017.0704.1415 07/04/2017 Workqueue: events_long i915_hangcheck_elapsed [i915] Call Trace: dump_stack+0x68/0x9f print_circular_bug+0x235/0x3c0 ? lockdep_init_map_crosslock+0x20/0x20 check_prev_add+0x430/0x840 ? irq_work_queue+0x86/0xe0 ? wake_up_klogd+0x53/0x70 __lock_acquire+0x1420/0x15e0 ? __lock_acquire+0x1420/0x15e0 ? lockdep_init_map_crosslock+0x20/0x20 lock_acquire+0xb0/0x200 ? stop_machine+0x1c/0x40 ? i915_gem_object_truncate+0x50/0x50 [i915] cpus_read_lock+0x3d/0xb0 ? stop_machine+0x1c/0x40 stop_machine+0x1c/0x40 i915_gem_set_wedged+0x1a/0x20 [i915] i915_reset+0xb9/0x230 [i915] i915_reset_device+0x1f6/0x260 [i915] ? gen8_gt_irq_ack+0x170/0x170 [i915] ? work_on_cpu_safe+0x60/0x60 i915_handle_error+0x2d8/0x430 [i915] ? vsnprintf+0xd1/0x4b0 ? scnprintf+0x3a/0x70 hangcheck_declare_hang+0xd3/0xf0 [i915] ? intel_runtime_pm_put+0x56/0xa0 [i915] i915_hangcheck_elapsed+0x262/0x2d0 [i915] process_one_work+0x233/0x660 worker_thread+0x4e/0x3b0 kthread+0x152/0x190 ? process_one_work+0x660/0x660 ? kthread_create_on_node+0x40/0x40 ret_from_fork+0x27/0x40 Setting dangerous option reset - tainting kernel i915 0000:00:02.0: Resetting chip after gpu hang Setting dangerous option reset - tainting kernel i915 0000:00:02.0: Resetting chip after gpu hang v2: Have 1 global synchronize_rcu() barrier across all engines, and improve commit message. v3: We need to protect the seqno update with the timeline spinlock (in set_wedged) to avoid racing with other updates of the seqno, like we already do in nop_submit_request (Chris). v4: Use two-phase sequence to plug the race Chris spotted where we can complete requests before they're marked up with -EIO. v5: Review from Chris: - simplify nop_submit_request. - Add comment to rcu_read_lock section. - Align comments with the new style. v6: Remove unused variable to appease CI. Reviewed-by:
Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171011091019.1425-1-daniel.vetter@ffwll.ch
-
Sagar Arun Kamble authored
Defined new struct intel_rc6 to hold RC6 specific state and intel_ring_pstate to hold ring specific state. v2: s/intel_ring_pstate/intel_llc_pstate. Removed checks from autoenable_* functions. (Chris) Signed-off-by:
Sagar Arun Kamble <sagar.a.kamble@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Radoslaw Szwichtenberg <radoslaw.szwichtenberg@intel.com> Reviewed-by:
-
Sagar Arun Kamble authored
Prepared generic functions intel_enable_rc6, intel_disable_rc6, intel_enable_rps and intel_disable_rps functions to setup RC6/RPS based on platforms. v2: Make intel_enable/disable_rc6/rps static. (Chris) v3: Added lockdep_assert_held(dev_priv->pcu_lock) in new generic functions. (Chris) Removed WARN_ON(&dev_priv->pcu_lock) from lower level functions as generic function now has lockdep_assert. Rebase. Signed-off-by:
-
Sagar Arun Kamble authored
Prepared intel_update_ring_freq function to setup ring frequency for applicable platforms determined by macro HAS_LLC. v2: Replaced NEEDS_RING_FREQ_UPDATE with HAS_LLC macro. (Chris) Added check while calling from intel_enable_gt_powersave. v3: s/intel_update_ring_freq/intel_enable_llc_pstate and created new placeholder function intel_disable_llc_pstate. (Chris) Signed-off-by: -
Sagar Arun Kamble authored
This function gives the status of RC6, whether disabled or if enabled then which state. intel_enable_rc6 will be used for enabling RC6 in the next patch. v2: Rebase. v3: Rebase. Signed-off-by:
-
Sagar Arun Kamble authored
Prepared substructure rps for RPS related state. autoenable_work is used for RC6 too hence it is defined outside rps structure. As we do this lot many functions are refactored to use intel_rps *rps to access rps related members. Hence renamed intel_rps_client pointer variables to rps_client in various functions. v2: Rebase. v3: s/pm/gt_pm (Chris) Refactored access to rps structure by declaring struct intel_rps * in many functions. Signed-off-by:
-
Sagar Arun Kamble authored
In order to separate GT PM related functionality into new structure we are updating rps structure. hw_lock in it is used for display related PCU communication too hence move it to dev_priv. Signed-off-by:
-
Sagar Arun Kamble authored
We were using dev_priv->pm for runtime power management related state. This patch renames it to "runtime_pm" which looks more apt. v2: s/rpm/runtime_pm (Chris) Signed-off-by:
-
Sagar Arun Kamble authored
This patch separates enable/disable of RC6 and RPS for CHV. v2: Fixed comment. Signed-off-by:
Radoslaw Szwichtenberg <radoslaw.szwichtenberg@intel.com> Reviewed-by:
-
Sagar Arun Kamble authored
This patch separates enable/disable of RC6 and RPS for VLV. v2: Removed unnecessary comments about forcewakes while enabling RC6/RPS. Added changes to output turbo control status for VLV in i915_frequency_info. Signed-off-by:
-
Sagar Arun Kamble authored
This patch separates RC6 and RPS enabling for BDW. RC6/RPS Disabling are handled through gen6 functions. PM Programming guide recommends a sequence within forcewakes to configure RC6, RPS and ring frequencies in sequence. With this patch the order is still maintained. v2: Update sequence numbers in RC6 programming and comment about intent of reset_rps during gen8_enable_rps. (Radoslaw) v3: Rebase. Signed-off-by:
-
Sagar Arun Kamble authored
This patch removes all IS_BROADWELL checks and non-BDW changes from gen8_enable_rps as it is called only for BROADWELL. Suggested-by:
-
Sagar Arun Kamble authored
This patch separates enable/disable of RC6 and RPS for gen6+ platforms prior to VLV. v2: Fixed checkpatch issue. (Sagar) Signed-off-by:
-
- 10 Oct, 2017 11 commits
-
-
Matthew Auld authored
There's really no good reason to be using the kernel context for the huge-page livetests. Also with the introduction of commit bef27bdb ("drm/i915: Assert we do not try to expand VMA for hugepage inside GGTT") we start hitting the bug on in the selftests, since the kernel context will always return true for i915_vma_is_ggtt(), so now seems like the opportune time to instead create our own context. Fixes: 4049866f ("drm/i915/selftests: huge page tests") Fixes: bef27bdb ("drm/i915: Assert we do not try to expand VMA for hugepage inside GGTT") Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20171010133030.12112-1-matthew.auld@intel.comReviewed-by:
-
Chris Wilson authored
If we fail to allocate a 64k hugepage for scratch, we try again with a normal 4k page (with some loss of efficiency at runtime). As we handle this gracefully, we do not need a noisy allocation failure warning. Signed-off-by:
Matthew Auld <matthew.william.auld@gmail.com> Reviewed-by:
-
Mika Kahola authored
Cleanup and parametrize the handling of South Error Interrupts (SERR_INT). Reviewed-by:
Mika Kahola <mika.kahola@intel.com> Signed-off-by:
-
Mika Kahola authored
Favor for_each_pipe() macro when looping through pipes. v2: use 'enum pipe pipe' instead of 'i' Reviewed-by:
-
Mika Kahola authored
Fold IRQ pipe masks into one loop instead of hardcoding per pipe. Reviewed-by:
-
Mika Kahola authored
Remove dependency for I915_MAX_PIPES by replacing it with for_each_pipe() macro. v2: use 'enum pipe pipe' instead of 'i' Reviewed-by:
Ramalingam C <ramalingam.c@intel.com> Signed-off-by:
-
Mika Kahola authored
Let's remove the dependency on I915_MAX_PIPES. Instead, get the number of pipes from platform information. Reviewed-by:
-
Ville Syrjälä authored
Signed-off-by:
-
Ville Syrjälä authored
Pass the crtc state to i9xx_enable_pll() and use it rather than crtc->config. Signed-off-by:
-
Ville Syrjälä authored
Apply a bit of polish by parametrizing the CBR_DPLLBMD_PIPE defines. Signed-off-by:
-
Ville Syrjälä authored
One more place where we've failed to switch to enum pipe when talking about PCH transcoders. Signed-off-by:
-
