- 14 Aug, 2019 5 commits
-
-
Will Deacon authored
Rather than subtracting from -1 and then adding 1, we can simply subtract from 0. Tested-by: Steve Capper <steve.capper@arm.com> Reviewed-by: Steve Capper <steve.capper@arm.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will@kernel.org>
-
Will Deacon authored
Build virt_to_page() on top of virt_to_pfn() so we can avoid the need for explicit shifting. Tested-by: Steve Capper <steve.capper@arm.com> Reviewed-by: Steve Capper <steve.capper@arm.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Will Deacon <will@kernel.org>
-
Will Deacon authored
The default implementations of page_to_virt() and virt_to_page() are fairly confusing to read and the former evaluates its 'page' parameter twice in the macro Rewrite them so that the computation is expressed as 'base + index' in both cases and the parameter is always evaluated exactly once. Tested-by: Steve Capper <steve.capper@arm.com> Reviewed-by: Steve Capper <steve.capper@arm.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will@kernel.org>
-
Will Deacon authored
When converting a linear virtual address to a physical address, pfn or struct page *, we must make sure that the tag bits are masked before the calculation otherwise we end up with corrupt pointers when running with CONFIG_KASAN_SW_TAGS=y: | Unable to handle kernel paging request at virtual address 0037fe0007580d08 | [0037fe0007580d08] address between user and kernel address ranges Mask out the tag in __virt_to_phys_nodebug() and virt_to_page(). Reported-by: Qian Cai <cai@lca.pw> Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Tested-by: Steve Capper <steve.capper@arm.com> Reviewed-by: Steve Capper <steve.capper@arm.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Fixes: 9cb1c5dd ("arm64: mm: Remove bit-masking optimisations for PAGE_OFFSET and VMEMMAP_START") Signed-off-by: Will Deacon <will@kernel.org>
-
Will Deacon authored
virt_addr_valid() is intended to test whether or not the passed address is a valid linear map address. Unfortunately, it relies on _virt_addr_is_linear() which is broken because it assumes the linear map is at the top of the address space, which it no longer is. Reimplement virt_addr_valid() using __is_lm_address() and remove _virt_addr_is_linear() entirely. At the same time, ensure we evaluate the macro parameter only once and move it within the __ASSEMBLY__ block. Reported-by: Qian Cai <cai@lca.pw> Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Tested-by: Steve Capper <steve.capper@arm.com> Reviewed-by: Steve Capper <steve.capper@arm.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Fixes: 14c127c9 ("arm64: mm: Flip kernel VA space") Signed-off-by: Will Deacon <will@kernel.org>
-
- 09 Aug, 2019 13 commits
-
-
Will Deacon authored
_virt_addr_valid() is defined as the same value in two places and rolls its own version of virt_to_pfn() in both cases. Consolidate these definitions by inlining a simplified version directly into virt_addr_valid(). Signed-off-by: Will Deacon <will@kernel.org>
-
Steve Capper authored
As the kernel no longer prints out the memory layout on boot, this patch adds this information back to the memory document. Also, as the 52-bit support introduces some subtle changes to the arm64 memory, the rationale behind these changes are also added to the memory document. Signed-off-by: Steve Capper <steve.capper@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will@kernel.org>
-
Steve Capper authored
Previous patches have enabled 52-bit kernel + user VAs and there is no longer any scenario where user VA != kernel VA size. This patch removes the, now redundant, vabits_user variable and replaces usage with vabits_actual where appropriate. Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Steve Capper <steve.capper@arm.com> Signed-off-by: Will Deacon <will@kernel.org>
-
Steve Capper authored
Most of the machinery is now in place to enable 52-bit kernel VAs that are detectable at boot time. This patch adds a Kconfig option for 52-bit user and kernel addresses and plumbs in the requisite CONFIG_ macros as well as sets TCR.T1SZ, physvirt_offset and vmemmap at early boot. To simplify things this patch also removes the 52-bit user/48-bit kernel kconfig option. Signed-off-by: Steve Capper <steve.capper@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will@kernel.org>
-
Steve Capper authored
In a later patch we will need to have a slightly larger VMEMMAP region to accommodate boot time selection between 48/52-bit kernel VAs. This patch modifies the formula for computing VMEMMAP_SIZE to depend explicitly on the PAGE_OFFSET and start of kernel addressable memory. (This allows for a slightly larger direct linear map in future). Signed-off-by: Steve Capper <steve.capper@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will@kernel.org>
-
Steve Capper authored
vmemmap is a preprocessor definition that depends on a variable, memstart_addr. In a later patch we will need to expand the size of the VMEMMAP region and optionally modify vmemmap depending upon whether or not hardware support is available for 52-bit virtual addresses. This patch changes vmemmap to be a variable. As the old definition depended on a variable load, this should not affect performance noticeably. Signed-off-by: Steve Capper <steve.capper@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will@kernel.org>
-
Steve Capper authored
When running with a 52-bit userspace VA and a 48-bit kernel VA we offset ttbr1_el1 to allow the kernel pagetables with a 52-bit PTRS_PER_PGD to be used for both userspace and kernel. Moving on to a 52-bit kernel VA we no longer require this offset to ttbr1_el1 should we be running on a system with HW support for 52-bit VAs. This patch introduces conditional logic to offset_ttbr1 to query SYS_ID_AA64MMFR2_EL1 whenever 52-bit VAs are selected. If there is HW support for 52-bit VAs then the ttbr1 offset is skipped. We choose to read a system register rather than vabits_actual because offset_ttbr1 can be called in places where the kernel data is not actually mapped. Calls to offset_ttbr1 appear to be made from rarely called code paths so this extra logic is not expected to adversely affect performance. Signed-off-by: Steve Capper <steve.capper@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will@kernel.org>
-
Steve Capper authored
In order to support 52-bit kernel addresses detectable at boot time, one needs to know the actual VA_BITS detected. A new variable vabits_actual is introduced in this commit and employed for the KVM hypervisor layout, KASAN, fault handling and phys-to/from-virt translation where there would normally be compile time constants. In order to maintain performance in phys_to_virt, another variable physvirt_offset is introduced. Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Steve Capper <steve.capper@arm.com> Signed-off-by: Will Deacon <will@kernel.org>
-
Steve Capper authored
In order to support 52-bit kernel addresses detectable at boot time, the kernel needs to know the most conservative VA_BITS possible should it need to fall back to this quantity due to lack of hardware support. A new compile time constant VA_BITS_MIN is introduced in this patch and it is employed in the KASAN end address, KASLR, and EFI stub. For Arm, if 52-bit VA support is unavailable the fallback is to 48-bits. In other words: VA_BITS_MIN = min (48, VA_BITS) Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Steve Capper <steve.capper@arm.com> Signed-off-by: Will Deacon <will@kernel.org>
-
Steve Capper authored
The kernel page table dumper assumes that the placement of VA regions is constant and determined at compile time. As we are about to introduce variable VA logic, we need to be able to determine certain regions at boot time. Specifically the VA_START and KASAN_SHADOW_START will depend on whether or not the system is booted with 52-bit kernel VAs. This patch adds logic to the kernel page table dumper s.t. these regions can be computed at boot time. Signed-off-by: Steve Capper <steve.capper@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will@kernel.org>
-
Steve Capper authored
KASAN_SHADOW_OFFSET is a constant that is supplied to gcc as a command line argument and affects the codegen of the inline address sanetiser. Essentially, for an example memory access: *ptr1 = val; The compiler will insert logic similar to the below: shadowValue = *(ptr1 >> KASAN_SHADOW_SCALE_SHIFT + KASAN_SHADOW_OFFSET) if (somethingWrong(shadowValue)) flagAnError(); This code sequence is inserted into many places, thus KASAN_SHADOW_OFFSET is essentially baked into many places in the kernel text. If we want to run a single kernel binary with multiple address spaces, then we need to do this with KASAN_SHADOW_OFFSET fixed. Thankfully, due to the way the KASAN_SHADOW_OFFSET is used to provide shadow addresses we know that the end of the shadow region is constant w.r.t. VA space size: KASAN_SHADOW_END = ~0 >> KASAN_SHADOW_SCALE_SHIFT + KASAN_SHADOW_OFFSET This means that if we increase the size of the VA space, the start of the KASAN region expands into lower addresses whilst the end of the KASAN region is fixed. Currently the arm64 code computes KASAN_SHADOW_OFFSET at build time via build scripts with the VA size used as a parameter. (There are build time checks in the C code too to ensure that expected values are being derived). It is sufficient, and indeed is a simplification, to remove the build scripts (and build time checks) entirely and instead provide KASAN_SHADOW_OFFSET values. This patch removes the logic to compute the KASAN_SHADOW_OFFSET in the arm64 Makefile, and instead we adopt the approach used by x86 to supply offset values in kConfig. To help debug/develop future VA space changes, the Makefile logic has been preserved in a script file in the arm64 Documentation folder. Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Steve Capper <steve.capper@arm.com> Signed-off-by: Will Deacon <will@kernel.org>
-
Steve Capper authored
In order to allow for a KASAN shadow that changes size at boot time, one must fix the KASAN_SHADOW_END for both 48 & 52-bit VAs and "grow" the start address. Also, it is highly desirable to maintain the same function addresses in the kernel .text between VA sizes. Both of these requirements necessitate us to flip the kernel address space halves s.t. the direct linear map occupies the lower addresses. This patch puts the direct linear map in the lower addresses of the kernel VA range and everything else in the higher ranges. We need to adjust: *) KASAN shadow region placement logic, *) KASAN_SHADOW_OFFSET computation logic, *) virt_to_phys, phys_to_virt checks, *) page table dumper. These are all small changes, that need to take place atomically, so they are bundled into this commit. As part of the re-arrangement, a guard region of 2MB (to preserve alignment for fixed map) is added after the vmemmap. Otherwise the vmemmap could intersect with IS_ERR pointers. Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Steve Capper <steve.capper@arm.com> Signed-off-by: Will Deacon <will@kernel.org>
-
Steve Capper authored
Currently there are assumptions about the alignment of VMEMMAP_START and PAGE_OFFSET that won't be valid after this series is applied. These assumptions are in the form of bitwise operators being used instead of addition and subtraction when calculating addresses. This patch replaces these bitwise operators with addition/subtraction. Signed-off-by: Steve Capper <steve.capper@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will@kernel.org>
-
- 05 Aug, 2019 1 commit
-
-
Linus Torvalds authored
-
- 04 Aug, 2019 10 commits
-
-
git://git.infradead.org/users/jjs/linux-tpmddLinus Torvalds authored
Pull tpm fixes from Jarkko Sakkinen: "Two bug fixes that did not make into my first pull request" * tag 'tpmdd-next-20190805' of git://git.infradead.org/users/jjs/linux-tpmdd: tpm: tpm_ibm_vtpm: Fix unallocated banks tpm: Fix null pointer dereference on chip register error path
-
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linuxLinus Torvalds authored
Pull MTD fixes from Miquel Raynal: "NAND: - Fix Micron driver as some chips enable internal ECC correction during their discovery while they advertize they do not have any. Hyperbus: - Restrict the build to only ARM64 SoCs (and compile testing) which is what should have been done since the beginning. - Fix Kconfig issue by selection something instead of implying it" * tag 'mtd/fixes-for-5.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: mtd: hyperbus: Add hardware dependency to AM654 driver mtd: hyperbus: Kconfig: Fix HBMC_AM654 dependencies mtd: rawnand: micron: handle on-die "ECC-off" devices correctly
-
Nayna Jain authored
The nr_allocated_banks and allocated banks are initialized as part of tpm_chip_register. Currently, this is done as part of auto startup function. However, some drivers, like the ibm vtpm driver, do not run auto startup during initialization. This results in uninitialized memory issue and causes a kernel panic during boot. This patch moves the pcr allocation outside the auto startup function into tpm_chip_register. This ensures that allocated banks are initialized in any case. Fixes: 879b5892 ("tpm: retrieve digest size of unknown algorithms with PCR read") Reported-by: Michal Suchanek <msuchanek@suse.de> Signed-off-by: Nayna Jain <nayna@linux.ibm.com> Reviewed-by: Mimi Zohar <zohar@linux.ibm.com> Tested-by: Sachin Sant <sachinp@linux.vnet.ibm.com> Tested-by: Michal Suchánek <msuchanek@suse.de> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
-
Milan Broz authored
If clk_enable is not defined and chip initialization is canceled code hits null dereference. Easily reproducible with vTPM init fail: swtpm chardev --tpmstate dir=nonexistent_dir --tpm2 --vtpm-proxy BUG: kernel NULL pointer dereference, address: 00000000 ... Call Trace: tpm_chip_start+0x9d/0xa0 [tpm] tpm_chip_register+0x10/0x1a0 [tpm] vtpm_proxy_work+0x11/0x30 [tpm_vtpm_proxy] process_one_work+0x214/0x5a0 worker_thread+0x134/0x3e0 ? process_one_work+0x5a0/0x5a0 kthread+0xd4/0x100 ? process_one_work+0x5a0/0x5a0 ? kthread_park+0x90/0x90 ret_from_fork+0x19/0x24 Fixes: 719b7d81 ("tpm: introduce tpm_chip_start() and tpm_chip_stop()") Cc: stable@vger.kernel.org # v5.1+ Signed-off-by: Milan Broz <gmazyland@gmail.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: "Some more powerpc fixes for 5.3: - Wire up the new clone3 syscall. - A fix for the PAPR SCM nvdimm driver, to fix a crash when firmware gives us a device that's attached to a non-online NUMA node. - A fix for a boot failure on 32-bit with KASAN enabled. - Three fixes for implicit fall through warnings, some of which are errors for us due to -Werror. Thanks to: Aneesh Kumar K.V, Christophe Leroy, Kees Cook, Santosh Sivaraj, Stephen Rothwell" * tag 'powerpc-5.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/kasan: fix early boot failure on PPC32 drivers/macintosh/smu.c: Mark expected switch fall-through powerpc/spe: Mark expected switch fall-throughs powerpc/nvdimm: Pick nearby online node if the device node is not online powerpc/kvm: Fall through switch case explicitly powerpc: Wire up clone3 syscall
-
Geert Uytterhoeven authored
At the end of the v5.3 upstream kernel development cycle, Simon will be stepping down from his role as Renesas SoC maintainer. Starting with the v5.4 development cycle, Geert is taking over this role. Add Geert as a co-maintainer, and add his git repository and branch. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
Merge tag 'kbuild-fixes-v5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - detect missing missing "WITH Linux-syscall-note" for uapi headers - fix needless rebuild when using Clang - fix false-positive cc-option in Kconfig when using Clang - avoid including corrupted .*.cmd files in the modpost stage - fix warning of 'make vmlinux' - fix {m,n,x,g}config to not generate the broken .config on the second save operation. - some trivial Makefile fixes * tag 'kbuild-fixes-v5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kconfig: Clear "written" flag to avoid data loss kbuild: Check for unknown options with cc-option usage in Kconfig and clang lib/raid6: fix unnecessary rebuild of vpermxor*.c kbuild: modpost: do not parse unnecessary rules for vmlinux modpost kbuild: modpost: remove unnecessary dependency for __modpost kbuild: modpost: handle KBUILD_EXTRA_SYMBOLS only for external modules kbuild: modpost: include .*.cmd files only when targets exist kbuild: initialize CLANG_FLAGS correctly in the top Makefile kbuild: detect missing "WITH Linux-syscall-note" for uapi headers
-
git://github.com/micah-morton/linuxLinus Torvalds authored
Pull SafeSetID maintainer update from Micah Morton: "Add entry in MAINTAINERS file for SafeSetID LSM" * tag 'safesetid-maintainers-correction-5.3-rc2' of git://github.com/micah-morton/linux: Add entry in MAINTAINERS file for SafeSetID LSM
-
M. Vefa Bicakci authored
Prior to this commit, starting nconfig, xconfig or gconfig, and saving the .config file more than once caused data loss, where a .config file that contained only comments would be written to disk starting from the second save operation. This bug manifests itself because the SYMBOL_WRITTEN flag is never cleared after the first call to conf_write, and subsequent calls to conf_write then skip all of the configuration symbols due to the SYMBOL_WRITTEN flag being set. This commit resolves this issue by clearing the SYMBOL_WRITTEN flag from all symbols before conf_write returns. Fixes: 8e2442a5 ("kconfig: fix missing choice values in auto.conf") Cc: linux-stable <stable@vger.kernel.org> # 4.19+ Signed-off-by: M. Vefa Bicakci <m.v.b@runbox.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
-
git://github.com/jcmvbkbc/linux-xtensaLinus Torvalds authored
Pull Xtensa fix from Max Filippov: "Fix build for xtensa cores with coprocessors that was broken by entry/return abstraction patch" * tag 'xtensa-20190803' of git://github.com/jcmvbkbc/linux-xtensa: xtensa: fix build for cores with coprocessors
-
- 03 Aug, 2019 11 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c fixes from Wolfram Sang: "A set of driver fixes for the I2C subsystem" * 'i2c/for-current-fixed' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: s3c2410: Mark expected switch fall-through i2c: at91: fix clk_offset for sama5d2 i2c: at91: disable TXRDY interrupt after sending data i2c: iproc: Fix i2c master read more than 63 bytes eeprom: at24: make spd world-readable again
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf tooling fixes from Thomas Gleixner: "A set of updates for perf tools and documentation: perf header: - Prevent a division by zero - Deal with an uninitialized warning proper libbpf: - Fix the missiong __WORDSIZE definition for musl & al UAPI headers: - Synchronize kernel headers Documentation: - Fix the memory units for perf.data size" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: libbpf: fix missing __WORDSIZE definition perf tools: Fix perf.data documentation units for memory size perf header: Fix use of unitialized value warning perf header: Fix divide by zero error if f_header.attr_size==0 tools headers UAPI: Sync if_link.h with the kernel tools headers UAPI: Sync sched.h with the kernel tools headers UAPI: Sync usbdevice_fs.h with the kernels to get new ioctl tools perf beauty: Fix usbdevfs_ioctl table generator to handle _IOC() tools headers UAPI: Update tools's copy of drm.h headers tools headers UAPI: Update tools's copy of mman.h headers tools headers UAPI: Update tools's copy of kvm.h headers tools include UAPI: Sync x86's syscalls_64.tbl and generic unistd.h to pick up clone3 and pidfd_open
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull vdso timer fixes from Thomas Gleixner: "A series of commits to deal with the regression caused by the generic VDSO implementation. The usage of clock_gettime64() for 32bit compat fallback syscalls caused seccomp filters to kill innocent processes because they only allow clock_gettime(). Handle the compat syscalls with clock_gettime() as before, which is not a functional problem for the VDSO as the legacy compat application interface is not y2038 safe anyway. It's just extra fallback code which needs to be implemented on every architecture. It's opt in for now so that it does not break the compile of already converted architectures in linux-next. Once these are fixed, the #ifdeffery goes away. So much for trying to be smart and reuse code..." * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: arm64: compat: vdso: Use legacy syscalls as fallback x86/vdso/32: Use 32bit syscall fallback lib/vdso/32: Provide legacy syscall fallbacks lib/vdso: Move fallback invocation to the callers lib/vdso/32: Remove inconsistent NULL pointer checks
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fixes from Thomas Gleixner: "A small bunch of fixes from the irqchip department: - Fix a couple of UAF on error paths (RZA1, GICv3 ITS) - Fix iMX GPCv2 trigger setting - Add missing of_node_put() on error path in MBIGEN - Add another bunch of /* fall-through */ to silence warnings" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/renesas-rza1: Fix an use-after-free in rza1_irqc_probe() irqchip/irq-imx-gpcv2: Forward irq type to parent irqchip/irq-mbigen: Add of_node_put() before return irqchip/gic-v3-its: Free unused vpt_page when alloc vpe table fail irqchip/gic-v3: Mark expected switch fall-through
-
git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds authored
Pull xfs fixes from Darrick Wong: - Avoid leaking kernel stack contents to userspace - Fix a potential null pointer dereference in the dabtree scrub code * tag 'xfs-5.3-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: Fix possible null-pointer dereferences in xchk_da_btree_block_check_sibling() xfs: fix stack contents leakage in the v1 inumber ioctls
-
Linus Torvalds authored
Merge misc fixes from Andrew Morton: "17 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: drivers/acpi/scan.c: document why we don't need the device_hotplug_lock memremap: move from kernel/ to mm/ lib/test_meminit.c: use GFP_ATOMIC in RCU critical section asm-generic: fix -Wtype-limits compiler warnings cgroup: kselftest: relax fs_spec checks mm/memory_hotplug.c: remove unneeded return for void function mm/migrate.c: initialize pud_entry in migrate_vma() coredump: split pipe command whitespace before expanding template page flags: prioritize kasan bits over last-cpuid ubsan: build ubsan.c more conservatively kasan: remove clang version check for KASAN_STACK mm: compaction: avoid 100% CPU usage during compaction when a task is killed mm: migrate: fix reference check race between __find_get_block() and migration mm: vmscan: check if mem cgroup is disabled or not before calling memcg slab shrinker ocfs2: remove set but not used variable 'last_hash' Revert "kmemleak: allow to coexist with fault injection" kernel/signal.c: fix a kernel-doc markup
-
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linuxLinus Torvalds authored
Pull RISC-V fixes from Paul Walmsley: "Three minor RISC-V-related changes for v5.3-rc3: - Add build ID to VDSO builds to avoid a double-free in perf when libelf isn't used - Align the RV64 defconfig to the output of "make savedefconfig" so subsequent defconfig patches don't get out of hand - Drop a superfluous DT property from the FU540 SoC DT data (since it must be already set in board data that includes it)" * tag 'riscv/for-v5.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: defconfig: align RV64 defconfig to the output of "make savedefconfig" riscv: dts: fu540-c000: drop "timebase-frequency" riscv: Fix perf record without libelf support
-
David Hildenbrand authored
Let's document why the lock is not needed in acpi_scan_init(), right now this is not really obvious. [akpm@linux-foundation.org: fix tpyo] Link: http://lkml.kernel.org/r/20190731135306.31524-1-david@redhat.comSigned-off-by: David Hildenbrand <david@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Oscar Salvador <osalvador@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Christoph Hellwig authored
memremap.c implements MM functionality for ZONE_DEVICE, so it really should be in the mm/ directory, not the kernel/ one. Link: http://lkml.kernel.org/r/20190722094143.18387-1-hch@lst.deSigned-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com> Acked-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Alexander Potapenko authored
kmalloc() shouldn't sleep while in RCU critical section, therefore use GFP_ATOMIC instead of GFP_KERNEL. The bug was spotted by the 0day kernel testing robot. Link: http://lkml.kernel.org/r/20190725121703.210874-1-glider@google.com Fixes: 7e659650cbda ("lib: introduce test_meminit module") Signed-off-by: Alexander Potapenko <glider@google.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Reported-by: kernel test robot <lkp@intel.com> Cc: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Qian Cai authored
Commit d66acc39 ("bitops: Optimise get_order()") introduced a compilation warning because "rx_frag_size" is an "ushort" while PAGE_SHIFT here is 16. The commit changed the get_order() to be a multi-line macro where compilers insist to check all statements in the macro even when __builtin_constant_p(rx_frag_size) will return false as "rx_frag_size" is a module parameter. In file included from ./arch/powerpc/include/asm/page_64.h:107, from ./arch/powerpc/include/asm/page.h:242, from ./arch/powerpc/include/asm/mmu.h:132, from ./arch/powerpc/include/asm/lppaca.h:47, from ./arch/powerpc/include/asm/paca.h:17, from ./arch/powerpc/include/asm/current.h:13, from ./include/linux/thread_info.h:21, from ./arch/powerpc/include/asm/processor.h:39, from ./include/linux/prefetch.h:15, from drivers/net/ethernet/emulex/benet/be_main.c:14: drivers/net/ethernet/emulex/benet/be_main.c: In function 'be_rx_cqs_create': ./include/asm-generic/getorder.h:54:9: warning: comparison is always true due to limited range of data type [-Wtype-limits] (((n) < (1UL << PAGE_SHIFT)) ? 0 : \ ^ drivers/net/ethernet/emulex/benet/be_main.c:3138:33: note: in expansion of macro 'get_order' adapter->big_page_size = (1 << get_order(rx_frag_size)) * PAGE_SIZE; ^~~~~~~~~ Fix it by moving all of this multi-line macro into a proper function, and killing __get_order() off. [akpm@linux-foundation.org: remove __get_order() altogether] [cai@lca.pw: v2] Link: http://lkml.kernel.org/r/1564000166-31428-1-git-send-email-cai@lca.pw Link: http://lkml.kernel.org/r/1563914986-26502-1-git-send-email-cai@lca.pw Fixes: d66acc39 ("bitops: Optimise get_order()") Signed-off-by: Qian Cai <cai@lca.pw> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Cc: David S. Miller <davem@davemloft.net> Cc: Arnd Bergmann <arnd@arndb.de> Cc: David Howells <dhowells@redhat.com> Cc: Jakub Jelinek <jakub@redhat.com> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Bill Wendling <morbo@google.com> Cc: James Y Knight <jyknight@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-