- 26 Jul, 2010 40 commits
-
-
Christoph Hellwig authored
Since Linux 2.6.33 the kernel has support for real O_SYNC, which made the osyncisosync option a no-op. Warn the users about this and remove the mount flag for it. Signed-off-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Dave Chinner <dchinner@redhat.com> Signed-off-by:
Dave Chinner <david@fromorbit.com>
-
Christoph Hellwig authored
Move xfs_filestream_peek_ag, xxfs_filestream_get_ag and xfs_filestream_put_ag from xfs_filestream.h to xfs_filestream.c where it's only callers are, and remove the inline marker while we're at it to let the compiler decide on the inlining. Also don't return a value from xfs_filestream_put_ag because we don't need it. Signed-off-by:
-
Christoph Hellwig authored
[hch: dropped a few hunks that need structural changes instead] Signed-off-by:
Andi Kleen <ak@linux.intel.com> Reviewed-by:
-
Tony Luck authored
When CONFIG_XFS_POSIX_ACL is not set "xfs_check_acl" is #defined to NULL - which breaks the code attempting to add a tracepoint on this function. Only define the tracepoint when the function exists. Signed-off-by:
Tony Luck <tony.luck@intel.com> Reviewed-by:
-
Kulikov Vasiliy authored
map_len is unsigned. Checking map_len <= 0 is buggy when it should be below zero. So, check exact expression instead of map_len. Signed-off-by:
Kulikov Vasiliy <segooon@gmail.com> Reviewed-by:
-
Dave Chinner authored
Avoid a lockdep warning by preventing page cache allocation from recursing back into the filesystem during memory reclaim. Signed-off-by:
Alex Elder <aelder@sgi.com> Signed-off-by:
-
Dave Chinner authored
Calling into memory reclaim with a locked inode buffer can deadlock if memory reclaim tries to lock the inode buffer during inode teardown. Convert the relevant memory allocations to use KM_NOFS to avoid this deadlock condition. Reported-by:
Peter Watkins <treestem@gmail.com> Signed-off-by:
-
Dave Chinner authored
xfs_trans_add_item() is called with ip->i_ilock held, which means it is unsafe for memory reclaim to recurse back into the filesystem (ilock is required in writeback). Hence the allocation needs to be KM_NOFS to avoid recursion. Lockdep report indicating memory allocation being called with the ip->i_ilock held is as follows: [ 1749.866796] ================================= [ 1749.867788] [ INFO: inconsistent lock state ] [ 1749.868327] 2.6.35-rc3-dgc+ #25 [ 1749.868741] --------------------------------- [ 1749.868741] inconsistent {IN-RECLAIM_FS-W} -> {RECLAIM_FS-ON-W} usage. [ 1749.868741] dd/2835 [HC0[0]:SC0[0]:HE1:SE1] takes: [ 1749.868741] (&(&ip->i_lock)->mr_lock){++++?.}, at: [<ffffffff813170fb>] xfs_ilock+0x10b/0x190 [ 1749.868741] {IN-RECLAIM_FS-W} state was registered at: [ 1749.868741] [<ffffffff810b3a97>] __lock_acquire+0x437/0x1450 [ 1749.868741] [<ffffffff810b4b56>] lock_acquire+0xa6/0x160 [ 1749.868741] [<ffffffff810a20b5>] down_write_nested+0x65/0xb0 [ 1749.868741] [<ffffffff813170fb>] xfs_ilock+0x10b/0x190 [ 1749.868741] [<ffffffff8134e819>] xfs_reclaim_inode+0x99/0x310 [ 1749.868741] [<ffffffff8134f56b>] xfs_inode_ag_walk+0x8b/0x150 [ 1749.868741] [<ffffffff8134f6bb>] xfs_inode_ag_iterator+0x8b/0xf0 [ 1749.868741] [<ffffffff8134f7a8>] xfs_reclaim_inode_shrink+0x88/0x90 [ 1749.868741] [<ffffffff81119d07>] shrink_slab+0x137/0x1a0 [ 1749.868741] [<ffffffff8111bbe1>] balance_pgdat+0x421/0x6a0 [ 1749.868741] [<ffffffff8111bf7d>] kswapd+0x11d/0x320 [ 1749.868741] [<ffffffff8109ce56>] kthread+0x96/0xa0 [ 1749.868741] [<ffffffff81035de4>] kernel_thread_helper+0x4/0x10 [ 1749.868741] irq event stamp: 4234335 [ 1749.868741] hardirqs last enabled at (4234335): [<ffffffff81147d25>] kmem_cache_free+0x115/0x220 [ 1749.868741] hardirqs last disabled at (4234334): [<ffffffff81147c4d>] kmem_cache_free+0x3d/0x220 [ 1749.868741] softirqs last enabled at (4233112): [<ffffffff81084dd2>] __do_softirq+0x142/0x260 [ 1749.868741] softirqs last disabled at (4233095): [<ffffffff81035edc>] call_softirq+0x1c/0x50 [ 1749.868741] [ 1749.868741] other info that might help us debug this: [ 1749.868741] 2 locks held by dd/2835: [ 1749.868741] #0: (&(&ip->i_iolock)->mr_lock#2){+.+.+.}, at: [<ffffffff81316edd>] xfs_ilock_nowait+0xed/0x200 [ 1749.868741] #1: (&(&ip->i_lock)->mr_lock){++++?.}, at: [<ffffffff813170fb>] xfs_ilock+0x10b/0x190 [ 1749.868741] [ 1749.868741] stack backtrace: [ 1749.868741] Pid: 2835, comm: dd Not tainted 2.6.35-rc3-dgc+ #25 [ 1749.868741] Call Trace: [ 1749.868741] [<ffffffff810b1faa>] print_usage_bug+0x18a/0x190 [ 1749.868741] [<ffffffff8104264f>] ? save_stack_trace+0x2f/0x50 [ 1749.868741] [<ffffffff810b2400>] ? check_usage_backwards+0x0/0xf0 [ 1749.868741] [<ffffffff810b2f11>] mark_lock+0x331/0x400 [ 1749.868741] [<ffffffff810b3047>] mark_held_locks+0x67/0x90 [ 1749.868741] [<ffffffff810b3111>] lockdep_trace_alloc+0xa1/0xe0 [ 1749.868741] [<ffffffff81147419>] kmem_cache_alloc+0x39/0x1e0 [ 1749.868741] [<ffffffff8133f954>] kmem_zone_alloc+0x94/0xe0 [ 1749.868741] [<ffffffff8133f9be>] kmem_zone_zalloc+0x1e/0x50 [ 1749.868741] [<ffffffff81335f02>] xfs_trans_add_item+0x72/0xb0 [ 1749.868741] [<ffffffff81339e41>] xfs_trans_ijoin+0xa1/0xd0 [ 1749.868741] [<ffffffff81319f82>] xfs_itruncate_finish+0x312/0x5d0 [ 1749.868741] [<ffffffff8133cb87>] xfs_free_eofblocks+0x227/0x280 [ 1749.868741] [<ffffffff8133cd18>] xfs_release+0x138/0x190 [ 1749.868741] [<ffffffff813464c5>] xfs_file_release+0x15/0x20 [ 1749.868741] [<ffffffff81150ebf>] fput+0x13f/0x260 [ 1749.868741] [<ffffffff8114d8c2>] filp_close+0x52/0x80 [ 1749.868741] [<ffffffff8114d9a9>] sys_close+0xb9/0x120 [ 1749.868741] [<ffffffff81034ff2>] system_call_fastpath+0x16/0x1b Signed-off-by: -
Dave Chinner authored
xfs_ireclaim has to get and put te pag structure because it is only called with the inode to reclaim. The one caller of this function already has a reference on the pag and a pointer to is, so move the radix tree delete to the caller and remove xfs_ireclaim completely. This avoids a xfs_perag_get/put on every inode being reclaimed. The overhead was noticed in a bug report at: https://bugzilla.kernel.org/show_bug.cgi?id=16348Signed-off-by:
-
Dave Chinner authored
xfs_buf_read() fails to detect dispatch errors before attempting to wait on sychronous IO. If there was an error, it will get stuck forever, waiting for an I/O that was never started. Make sure the error is detected correctly. Further, such a failure can leave locked pages in the page cache which will cause a later operation to hang on the page. Ensure that we correctly process pages in the buffers when we get a dispatch error. Signed-off-by:
-
Dave Chinner authored
I missed Dave Chinner's second revision of this change, and pushed his first version out to the repository instead. commit a476c59ebb279d738718edc0e3fb76aab3687114 Author: Dave Chinner <dchinner@redhat.com> This commit compensates for that by moving a block of code up a bit further, with a result that matches the the effect of Dave's second version. Dave's first version was: Reviewed-by:
Eric Sandeen <sandeen@redhat.com> Dave's second version was: Reviewed-by:
-
Christoph Hellwig authored
The open_exec file operation is only added by the external dmapi patch. Signed-off-by:
-
Christoph Hellwig authored
These days we always have buffers thanks to ->page_mkwrite. And we already have an assert a few lines above tripping in case that was not true due to a bug. Signed-off-by:
-
Christoph Hellwig authored
We only need disable I/O from direct or memcg reclaim. Signed-off-by:
-
Christoph Hellwig authored
We do need a barrier for the first buffer of a split log write. Otherwise we might incorrectly stamp the tail LSN into transactions in the first part of the split write, or not flush data I/O before updating the inode size. Signed-off-by:
-
Dave Chinner authored
Currently we don't remove the XFS mount from the shrinker list until late in the unmount path. By this time, we have already torn down the internals of the filesystem (e.g. the per-ag structures), and hence if the shrinker is executed between the teardown and the unregistering, the shrinker will get NULL per-ag structure pointers and panic trying to dereference them. Fix this by removing the xfs mount from the shrinker list before tearing down it's internal structures. Signed-off-by:
-
Christoph Hellwig authored
Replace the xfs_itrace_entry catchall with specific trace points. For most simple callers we now use the simple inode class, which used to be the iget class, but add more details tracing for namespace events, which now includes the name of the directory entries manipulated. Remove the xfs_inactive trace point, which is a duplicate of the clear_inode one, and the xfs_change_file_space trace point, which is immediately followed by the more specific alloc/free space trace points. Signed-off-by:
-
Christoph Hellwig authored
xfs_iput is just a small wrapper for xfs_iunlock + IRELE. Having this out of line wrapper means the trace events in those two can't track their caller properly. So just remove the wrapper and opencode the unlock + rele in the few callers. Signed-off-by:
-
Christoph Hellwig authored
We never get an i_mode of 0 or a locked VFS inode until we pass in the XFS_IGET_CREATE flag to xfs_iget, which makes xfs_iput_new equivalent to xfs_iput for the only caller. In addition to that xfs_nfs_get_inode does not even need to lock the inode given that the generation never changes for a life inode, so just pass a 0 lock_flags to xfs_iget and release the inode using IRELE in the error path. Signed-off-by:
-
Christoph Hellwig authored
The xfs_iget_alloc/found tracepoints are a bit misnamed and misplaced. Rename them to xfs_iget_hit/xfs_iget_miss and move them to the beggining of the xfs_iget_cache_hit/miss functions. Add a new xfs_iget_reclaim_fail tracepoint for the case where we fail to re-initialize a VFS inode, and add a second instance of the xfs_iget_skip tracepoint for the case of a failed igrab() call. Signed-off-by:
-
Christoph Hellwig authored
The tracing code can't print flags defined as enums. Most flags that we want to print are defines as macros already, but move the few remaining ones over to make the trace output more useful. Signed-off-by:
-
Christoph Hellwig authored
On the final put of a superblock the VFS already calls sync_filesystem for us to write out all data and wait for it. No need to start another asynchronous writeback inside ->put_super. Signed-off-by:
-
Christoph Hellwig authored
Remove the flags argument to __xfs_get_blocks as we can easily derive it from the direct argument, and remove the unused BMAPI_MMAP flag. Signed-off-by:
-
Christoph Hellwig authored
xfs_iomap passes a xfs_bmbt_irec pointer to xfs_iomap_write_direct and xfs_iomap_write_allocate to give them the results of our read-only xfs_bmapi query. Instead of allocating a new xfs_bmbt_irec on stack for the next call to xfs_bmapi re use the one we got passed as it's not used after this point. Signed-off-by:
-
Christoph Hellwig authored
We already rely on the fact that the sync code will cause a synchronous log force later on (currently via xfs_fs_sync_fs -> xfs_quiesce_data -> xfs_sync_data), so no need to do this here. This allows us to avoid a lot of synchronous log forces during sync, which pays of especially with delayed logging enabled. Some compilebench numbers that show this: xfs (delayed logging, 256k logbufs) =================================== intial create 25.94 MB/s 25.75 MB/s 25.64 MB/s create 8.54 MB/s 9.12 MB/s 9.15 MB/s patch 2.47 MB/s 2.47 MB/s 3.17 MB/s compile 29.65 MB/s 30.51 MB/s 27.33 MB/s clean 90.92 MB/s 98.83 MB/s 128.87 MB/s read tree 11.90 MB/s 11.84 MB/s 8.56 MB/s read compiled 28.75 MB/s 29.96 MB/s 24.25 MB/s delete tree 8.39 seconds 8.12 seconds 8.46 seconds delete compiled 8.35 seconds 8.44 seconds 5.11 seconds stat tree 6.03 seconds 5.59 seconds 5.19 seconds stat compiled tree 9.00 seconds 9.52 seconds 8.49 seconds xfs + write_inode log_force removal =================================== intial create 25.87 MB/s 25.76 MB/s 25.87 MB/s create 15.18 MB/s 14.80 MB/s 14.94 MB/s patch 3.13 MB/s 3.14 MB/s 3.11 MB/s compile 36.74 MB/s 37.17 MB/s 36.84 MB/s clean 226.02 MB/s 222.58 MB/s 217.94 MB/s read tree 15.14 MB/s 15.02 MB/s 15.14 MB/s read compiled tree 29.30 MB/s 29.31 MB/s 29.32 MB/s delete tree 6.22 seconds 6.14 seconds 6.15 seconds delete compiled tree 5.75 seconds 5.92 seconds 5.81 seconds stat tree 4.60 seconds 4.51 seconds 4.56 seconds stat compiled tree 4.07 seconds 3.87 seconds 3.96 seconds In addition to that also remove the delwri inode flush that is unessecary now that bulkstat is always coherent. Signed-off-by:
-
Christoph Hellwig authored
The writepage implementation in XFS still tries to deal with dirty but unmapped buffers which used to caused by writes through shared mmaps. Since the introduction of ->page_mkwrite these can't happen anymore, so remove the code dealing with them. Note that the all_bh variable which causes us to start I/O on all buffers on the pages was controlled by the count of unmapped buffers, which also included those not actually dirty. It's now unconditionally initialized to 0 but set to 1 for the case of small file size extensions. It probably can be removed entirely, but that's left for another patch. Signed-off-by:
-
Christoph Hellwig authored
Currently the xfs releasepage implementation has code to deal with converting delayed allocated and unwritten space. But we never get called for those as we always convert delayed and unwritten space when cleaning a page, or drop the state from the buffers in block_invalidatepage. We still keep a WARN_ON on those cases for now, but remove all the case dealing with it, which allows to fold xfs_page_state_convert into xfs_vm_writepage and remove the !startio case from the whole writeback path. Signed-off-by:
-
Eric Sandeen authored
xfstests 194 first truncats a file back and then extends it again by truncating it to a larger size. This causes discard_buffer to drop the mapped, but not the uptodate bit and thus creates something that xfs_page_state_convert takes for unmapped space created by mmap because it doesn't check for the dirty bit, which also gets cleared by discard_buffer and checked by other ->writepage implementations like block_write_full_page. Handle this kind of buffers early, and unlike Eric's first version of the patch simply ASSERT that the buffers is dirty, given that the mmap write case can't happen anymore since the introduction of ->page_mkwrite. The now dead code dealing with that will be deleted in a follow on patch. Signed-off-by:
Eric Sandeen <sandeen@sandeen.net> Signed-off-by:
-
Christoph Hellwig authored
This code was introduced four years ago in commit 3e57ecf6 without any review and has been unused since. Remove it just as the rest of the code introduced in that commit to reduce that stack usage and complexity in this central piece of code. Signed-off-by:
-
Christoph Hellwig authored
Signed-off-by:
-
Christoph Hellwig authored
Signed-off-by:
-
Christoph Hellwig authored
Signed-off-by:
-
Christoph Hellwig authored
Signed-off-by:
-
Christoph Hellwig authored
By making this member a void pointer we can get rid of a lot of pointless casts. Signed-off-by:
-
Christoph Hellwig authored
Currently we need to either call IHOLD or xfs_trans_ihold on an inode when joining it to a transaction via xfs_trans_ijoin. This patches instead makes xfs_trans_ijoin usable on it's own by doing an implicity xfs_trans_ihold, which also allows us to drop the third argument. For the case where we want to hold a reference on the inode a xfs_trans_ijoin_ref wrapper is added which does the IHOLD and marks the inode for needing an xfs_iput. In addition to the cleaner interface to the caller this also simplifies the implementation. Signed-off-by:
-
Christoph Hellwig authored
Get rid of the xfs_buf_pin/xfs_buf_unpin/xfs_buf_ispin helpers and opencode them in their only callers, just like we did for the inode pinning a while ago. Also remove duplicate trace points - the bufitem tracepoints cover all the information that is present in a buffer tracepoint. Signed-off-by:
-
Christoph Hellwig authored
Stop the function pointer casting madness and give all the li_cb instances correct prototype. Signed-off-by:
-
Christoph Hellwig authored
Stop the function pointer casting madness and give all the xfs_item_ops the correct prototypes. Signed-off-by:
-
Christoph Hellwig authored
The unpin_remove item operation instances always share most of the implementation with the respective unpin implementation. So instead of keeping two different entry points add a remove flag to the unpin operation and share the code more easily. Signed-off-by:
-
Christoph Hellwig authored
Currently we track log item descriptor belonging to a transaction using a complex opencoded chunk allocator. This code has been there since day one and seems to work around the lack of an efficient slab allocator. This patch replaces it with dynamically allocated log item descriptors from a dedicated slab pool, linked to the transaction by a linked list. This allows to greatly simplify the log item descriptor tracking to the point where it's just a couple hundred lines in xfs_trans.c instead of a separate file. The external API has also been simplified while we're at it - the xfs_trans_add_item and xfs_trans_del_item functions to add/ delete items from a transaction have been simplified to the bare minium, and the xfs_trans_find_item function is replaced with a direct dereference of the li_desc field. All debug code walking the list of log items in a transaction is down to a simple list_for_each_entry. Note that we could easily use a singly linked list here instead of the double linked list from list.h as the fastpath only does deletion from sequential traversal. But given that we don't have one available as a library function yet I use the list.h functions for simplicity. Signed-off-by:
-
