- 29 Jan, 2016 14 commits
-
-
Andrew Lunn authored
Some phy nodes list a compatible value indicating the PHY make/model. This is never used to match the device to the driver. However it does confuse the code to separate a PHY from a generic MDIO device like a switch. Generic MDIO devices must have a compatible value, PHYs can list clause 22 or 45, but nothing else. Issue a warning if we find a compatible value known on the whitelist, and say it is a PHY. Fixes: a9049e0c ("mdio: Add support for mdio drivers.") Reported-by:
Aaro Koskinen <aaro.koskinen@nokia.com> Reported-by:
Olof Johansson <olof@lixom.net> Tested-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Woojung Huh says: ==================== lan78xx: update and fixes lan78xx: change to use updated phy-ignore-interrupts lan78xx: Add to handle mux control per chip id lan78xx: throttle TX path at slower than SuperSpeed USB ==================== Signed-off-by: -
Woojung.Huh@microchip.com authored
Throttle TX path only at slower than SuperSpeed USB. SuperSpeed USB has enough bandwidth to maintain GigE. Signed-off-by:
Woojung Huh <woojung.huh@microchip.com> Signed-off-by:
-
Woojung.Huh@microchip.com authored
Depends on chip, some EEPROM pins are muxed with LED function. Disable & restore LED function to access EEPROM. Signed-off-by:
-
Woojung.Huh@microchip.com authored
Update lan78xx to use patch of commit 4f2aaf7d ("Merge branch 'fix-phy-ignore-interrupts'"). Signed-off-by:
-
Eric Dumazet authored
With some combinations of user provided flags in netlink command, it is possible to call tcp_get_info() with a buffer that is not 8-bytes aligned. It does matter on some arches, so we need to use put_unaligned() to store the u64 fields. Current iproute2 package does not trigger this particular issue. Fixes: 0df48c26 ("tcp: add tcpi_bytes_acked to tcp_info") Fixes: 977cb0ec ("tcp: add pacing_rate information into tcp_info") Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Ido Schimmel authored
When switchdev drivers process FDB notifications from the underlying device they resolve the netdev to which the entry points to and notify the bridge using the switchdev notifier. However, since the RTNL mutex is not held there is nothing preventing the netdev from disappearing in the middle, which will cause br_switchdev_event() to dereference a non-existing netdev. Make switchdev drivers hold the lock at the beginning of the notification processing session and release it once it ends, after notifying the bridge. Also, remove switchdev_mutex and fdb_lock, as they are no longer needed when RTNL mutex is held. Fixes: 03bf0c28 ("switchdev: introduce switchdev notifier") Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Malcolm Crossley authored
Trying to batch Tx response events results in poor performance because this delays freeing the transmitted skbs. Instead use the standard RING_FINAL_CHECK_FOR_RESPONSES() macro to be notified once the next Tx response is placed on the ring. Signed-off-by:
Malcolm Crossley <malcolm.crossley@citrix.com> Signed-off-by:
David Vrabel <david.vrabel@citrix.com> Signed-off-by:
-
Nicolas Schichan authored
The code in txq_put_data() would use txq->tx_curr_desc to index the tso_hdrs/tso_hdrs_dma buffers, for less than 8 bytes unaligned fragments, which is already moved to the next descriptor at the beginning of the function. If that fragment was the last of the the skb, the next skb would use that same space to place the ip headers, overwritting that small fragment data. Fixes: 91986fd3 (net: mv643xx_eth: Ensure proper data alignment in TSO TX path) Signed-off-by:
Nicolas Schichan <nschichan@freebox.fr> Reviewed-by:
Philipp Kirchhofer <philipp@familie-kirchhofer.de> Signed-off-by:
-
Andrew Lunn authored
of_phy_find_device() is used to find the phy device associated with a device node. It is expected the node is for a PHY device, but in fact it could of been probed as a generic MDIO device. Ensure the device is a PHY before returning it. Fixes: a9049e0c ("mdio: Add support for mdio drivers.") Reported-by:
-
David S. Miller authored
Merge tag 'mac80211-for-davem-2016-01-26' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== Here's a first set of fixes for the 4.5-rc cycle: * make regulatory messages much less verbose by default * various remain-on-channel fixes * scheduled scanning fixes with hardware restart * a PS-Poll handling fix; was broken just recently * bugfix to avoid buffering non-bufferable MMPDUs * world regulatory domain data fix * a fix for scanning causing other work to get stuck * hwsim: revert an older problematic patch that caused some userspace tools to have issues - not that big a deal as it's a debug only driver though ==================== Signed-off-by:
-
Richard Weinberger authored
Not every arch has io memory. So, unbreak the build by fixing the dependencies. Signed-off-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
-
Neal Cardwell authored
This commit fixes a corner case in tcp_mark_head_lost() which was causing the WARN_ON(len > skb->len) in tcp_fragment() to fire. tcp_mark_head_lost() was assuming that if a packet has tcp_skb_pcount(skb) of N, then it's safe to fragment off a prefix of M*mss bytes, for any M < N. But with the tricky way TCP pcounts are maintained, this is not always true. For example, suppose the sender sends 4 1-byte packets and have the last 3 packet sacked. It will merge the last 3 packets in the write queue into an skb with pcount = 3 and len = 3 bytes. If another recovery happens after a sack reneging event, tcp_mark_head_lost() may attempt to split the skb assuming it has more than 2*MSS bytes. This sounds very counterintuitive, but as the commit description for the related commit c0638c24 ("tcp: don't fragment SACKed skbs in tcp_mark_head_lost()") notes, this is because tcp_shifted_skb() coalesces adjacent regions of SACKed skbs, and when doing this it preserves the sum of their packet counts in order to reflect the real-world dynamics on the wire. The c0638c24 commit tried to avoid problems by not fragmenting SACKed skbs, since SACKed skbs are where the non-proportionality between pcount and skb->len/mss is known to be possible. However, that commit did not handle the case where during a reneging event one of these weird SACKed skbs becomes an un-SACKed skb, which tcp_mark_head_lost() can then try to fragment. The fix is to simply mark the entire skb lost when this happens. This makes the recovery slightly more aggressive in such corner cases before we detect reordering. But once we detect reordering this code path is by-passed because FACK is disabled. Signed-off-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
-
Joe Stringer authored
Later parts of the stack (including fragmentation) expect that there is never a socket attached to frag in a frag_list, however this invariant was not enforced on all defrag paths. This could lead to the BUG_ON(skb->sk) during ip_do_fragment(), as per the call stack at the end of this commit message. While the call could be added to openvswitch to fix this particular error, the head and tail of the frags list are already orphaned indirectly inside ip_defrag(), so it seems like the remaining fragments should all be orphaned in all circumstances. kernel BUG at net/ipv4/ip_output.c:586! [...] Call Trace: <IRQ> [<ffffffffa0205270>] ? do_output.isra.29+0x1b0/0x1b0 [openvswitch] [<ffffffffa02167a7>] ovs_fragment+0xcc/0x214 [openvswitch] [<ffffffff81667830>] ? dst_discard_out+0x20/0x20 [<ffffffff81667810>] ? dst_ifdown+0x80/0x80 [<ffffffffa0212072>] ? find_bucket.isra.2+0x62/0x70 [openvswitch] [<ffffffff810e0ba5>] ? mod_timer_pending+0x65/0x210 [<ffffffff810b732b>] ? __lock_acquire+0x3db/0x1b90 [<ffffffffa03205a2>] ? nf_conntrack_in+0x252/0x500 [nf_conntrack] [<ffffffff810b63c4>] ? __lock_is_held+0x54/0x70 [<ffffffffa02051a3>] do_output.isra.29+0xe3/0x1b0 [openvswitch] [<ffffffffa0206411>] do_execute_actions+0xe11/0x11f0 [openvswitch] [<ffffffff810b63c4>] ? __lock_is_held+0x54/0x70 [<ffffffffa0206822>] ovs_execute_actions+0x32/0xd0 [openvswitch] [<ffffffffa020b505>] ovs_dp_process_packet+0x85/0x140 [openvswitch] [<ffffffff810b63c4>] ? __lock_is_held+0x54/0x70 [<ffffffffa02068a2>] ovs_execute_actions+0xb2/0xd0 [openvswitch] [<ffffffffa020b505>] ovs_dp_process_packet+0x85/0x140 [openvswitch] [<ffffffffa0215019>] ? ovs_ct_get_labels+0x49/0x80 [openvswitch] [<ffffffffa0213a1d>] ovs_vport_receive+0x5d/0xa0 [openvswitch] [<ffffffff810b732b>] ? __lock_acquire+0x3db/0x1b90 [<ffffffff810b732b>] ? __lock_acquire+0x3db/0x1b90 [<ffffffff810b732b>] ? __lock_acquire+0x3db/0x1b90 [<ffffffffa0214895>] ? internal_dev_xmit+0x5/0x140 [openvswitch] [<ffffffffa02148fc>] internal_dev_xmit+0x6c/0x140 [openvswitch] [<ffffffffa0214895>] ? internal_dev_xmit+0x5/0x140 [openvswitch] [<ffffffff81660299>] dev_hard_start_xmit+0x2b9/0x5e0 [<ffffffff8165fc21>] ? netif_skb_features+0xd1/0x1f0 [<ffffffff81660f20>] __dev_queue_xmit+0x800/0x930 [<ffffffff81660770>] ? __dev_queue_xmit+0x50/0x930 [<ffffffff810b53f1>] ? mark_held_locks+0x71/0x90 [<ffffffff81669876>] ? neigh_resolve_output+0x106/0x220 [<ffffffff81661060>] dev_queue_xmit+0x10/0x20 [<ffffffff816698e8>] neigh_resolve_output+0x178/0x220 [<ffffffff816a8e6f>] ? ip_finish_output2+0x1ff/0x590 [<ffffffff816a8e6f>] ip_finish_output2+0x1ff/0x590 [<ffffffff816a8cee>] ? ip_finish_output2+0x7e/0x590 [<ffffffff816a9a31>] ip_do_fragment+0x831/0x8a0 [<ffffffff816a8c70>] ? ip_copy_metadata+0x1b0/0x1b0 [<ffffffff816a9ae3>] ip_fragment.constprop.49+0x43/0x80 [<ffffffff816a9c9c>] ip_finish_output+0x17c/0x340 [<ffffffff8169a6f4>] ? nf_hook_slow+0xe4/0x190 [<ffffffff816ab4c0>] ip_output+0x70/0x110 [<ffffffff816a9b20>] ? ip_fragment.constprop.49+0x80/0x80 [<ffffffff816aa9f9>] ip_local_out+0x39/0x70 [<ffffffff816abf89>] ip_send_skb+0x19/0x40 [<ffffffff816abfe3>] ip_push_pending_frames+0x33/0x40 [<ffffffff816df21a>] icmp_push_reply+0xea/0x120 [<ffffffff816df93d>] icmp_reply.constprop.23+0x1ed/0x230 [<ffffffff816df9ce>] icmp_echo.part.21+0x4e/0x50 [<ffffffff810b63c4>] ? __lock_is_held+0x54/0x70 [<ffffffff810d5f9e>] ? rcu_read_lock_held+0x5e/0x70 [<ffffffff816dfa06>] icmp_echo+0x36/0x70 [<ffffffff816e0d11>] icmp_rcv+0x271/0x450 [<ffffffff816a4ca7>] ip_local_deliver_finish+0x127/0x3a0 [<ffffffff816a4bc1>] ? ip_local_deliver_finish+0x41/0x3a0 [<ffffffff816a5160>] ip_local_deliver+0x60/0xd0 [<ffffffff816a4b80>] ? ip_rcv_finish+0x560/0x560 [<ffffffff816a46fd>] ip_rcv_finish+0xdd/0x560 [<ffffffff816a5453>] ip_rcv+0x283/0x3e0 [<ffffffff810b6302>] ? match_held_lock+0x192/0x200 [<ffffffff816a4620>] ? inet_del_offload+0x40/0x40 [<ffffffff8165d062>] __netif_receive_skb_core+0x392/0xae0 [<ffffffff8165e68e>] ? process_backlog+0x8e/0x230 [<ffffffff810b53f1>] ? mark_held_locks+0x71/0x90 [<ffffffff8165d7c8>] __netif_receive_skb+0x18/0x60 [<ffffffff8165e678>] process_backlog+0x78/0x230 [<ffffffff8165e6dd>] ? process_backlog+0xdd/0x230 [<ffffffff8165e355>] net_rx_action+0x155/0x400 [<ffffffff8106b48c>] __do_softirq+0xcc/0x420 [<ffffffff816a8e87>] ? ip_finish_output2+0x217/0x590 [<ffffffff8178e78c>] do_softirq_own_stack+0x1c/0x30 <EOI> [<ffffffff8106b88e>] do_softirq+0x4e/0x60 [<ffffffff8106b948>] __local_bh_enable_ip+0xa8/0xb0 [<ffffffff816a8eb0>] ip_finish_output2+0x240/0x590 [<ffffffff816a9a31>] ? ip_do_fragment+0x831/0x8a0 [<ffffffff816a9a31>] ip_do_fragment+0x831/0x8a0 [<ffffffff816a8c70>] ? ip_copy_metadata+0x1b0/0x1b0 [<ffffffff816a9ae3>] ip_fragment.constprop.49+0x43/0x80 [<ffffffff816a9c9c>] ip_finish_output+0x17c/0x340 [<ffffffff8169a6f4>] ? nf_hook_slow+0xe4/0x190 [<ffffffff816ab4c0>] ip_output+0x70/0x110 [<ffffffff816a9b20>] ? ip_fragment.constprop.49+0x80/0x80 [<ffffffff816aa9f9>] ip_local_out+0x39/0x70 [<ffffffff816abf89>] ip_send_skb+0x19/0x40 [<ffffffff816abfe3>] ip_push_pending_frames+0x33/0x40 [<ffffffff816d55d3>] raw_sendmsg+0x7d3/0xc30 [<ffffffff810b732b>] ? __lock_acquire+0x3db/0x1b90 [<ffffffff816e7557>] ? inet_sendmsg+0xc7/0x1d0 [<ffffffff810b63c4>] ? __lock_is_held+0x54/0x70 [<ffffffff816e759a>] inet_sendmsg+0x10a/0x1d0 [<ffffffff816e7495>] ? inet_sendmsg+0x5/0x1d0 [<ffffffff8163e398>] sock_sendmsg+0x38/0x50 [<ffffffff8163ec5f>] ___sys_sendmsg+0x25f/0x270 [<ffffffff811aadad>] ? handle_mm_fault+0x8dd/0x1320 [<ffffffff8178c147>] ? _raw_spin_unlock+0x27/0x40 [<ffffffff810529b2>] ? __do_page_fault+0x1e2/0x460 [<ffffffff81204886>] ? __fget_light+0x66/0x90 [<ffffffff8163f8e2>] __sys_sendmsg+0x42/0x80 [<ffffffff8163f932>] SyS_sendmsg+0x12/0x20 [<ffffffff8178cb17>] entry_SYSCALL_64_fastpath+0x12/0x6f Code: 00 00 44 89 e0 e9 7c fb ff ff 4c 89 ff e8 e7 e7 ff ff 41 8b 9d 80 00 00 00 2b 5d d4 89 d8 c1 f8 03 0f b7 c0 e9 33 ff ff f 66 66 66 2e 0f 1f 84 00 00 00 00 00 66 66 66 66 90 55 48 RIP [<ffffffff816a9a92>] ip_do_fragment+0x892/0x8a0 RSP <ffff88006d603170> Fixes: 7f8a436e ("openvswitch: Add conntrack action") Signed-off-by:
Joe Stringer <joe@ovn.org> Signed-off-by:
-
- 28 Jan, 2016 16 commits
-
-
David S. Miller authored
Xin Long says: ==================== fix the transport dead race check by using atomic_add_unless on refcnt sctp: fix the transport dead race check by using atomic_add_unless on refcnt sctp: hold transport before we access t->asoc in sctp proc sctp: remove the dead field of sctp_transport ==================== Signed-off-by: -
Xin Long authored
After we use refcnt to check if transport is alive, the dead can be removed from sctp_transport. The traversal of transport_addr_list in procfs dump is using list_for_each_entry_rcu, no need to check if it has been freed. sctp_generate_t3_rtx_event and sctp_generate_heartbeat_event is protected by sock lock, it's not necessary to check dead, either. also, the timers are cancelled when sctp_transport_free() is called, that it doesn't wait for refcnt to reach 0 to cancel them. Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
-
Xin Long authored
Previously, before rhashtable, /proc assoc listing was done by read-locking the entire hash entry and dumping all assocs at once, so we were sure that the assoc wasn't freed because it wouldn't be possible to remove it from the hash meanwhile. Now we use rhashtable to list transports, and dump entries one by one. That is, now we have to check if the assoc is still a good one, as the transport we got may be being freed. Signed-off-by:
-
Xin Long authored
Now when __sctp_lookup_association is running in BH, it will try to check if t->dead is set, but meanwhile other CPUs may be freeing this transport and this assoc and if it happens that __sctp_lookup_association checked t->dead a bit too early, it may think that the association is still good while it was already freed. So we fix this race by using atomic_add_unless in sctp_transport_hold. After we get one transport from hashtable, we will hold it only when this transport's refcnt is not 0, so that we can make sure t->asoc cannot be freed before we hold the asoc again. Note that sctp association is not freed using RCU so we can't use atomic_add_unless() with it as it may just be too late for that either. Fixes: 4f008781 ("sctp: apply rhashtable api to send/recv path") Reported-by:
Vlad Yasevich <vyasevich@gmail.com> Signed-off-by:
-
David S. Miller authored
Jiri Pirko says: ==================== mlxsw: driver fixes Couple of various mlxsw driver fixes. ==================== Signed-off-by: -
Ido Schimmel authored
The rx_lane, tx_lane and module fields in the PMLP register don't have an additional offset besides the base one (0x04), so set it to 0x00. Fixes: 4ec14b76 ("mlxsw: Add interface to access registers and process events") Signed-off-by:
-
Ido Schimmel authored
When dumping the FDB we can't compare the actual pointers of the ports structs, as it's possible the struct represents a vPort instead of the underlying physical port. Solve this by comparing the local port number instead, as it's shared between the physical ports and all the vPorts on top of him. Fixes: 54a73201 ("mlxsw: spectrum: Adjust switchdev ops for VLAN devices") Signed-off-by:
-
Ido Schimmel authored
LAG FDB records can only point to LAG devices or VLAN devices configured on top of them. Therefore, when dumping the FDB we shouldn't associate these records with the underlying physical ports. Fixes: 8a1ab5d7 ("mlxsw: spectrum: Implement FDB add/remove/dump for LAG") Signed-off-by:
-
Ido Schimmel authored
LAG FDB entries pointing to VLAN devices should be reported to the bridge with the matching VLAN device and not the underlying LAG device. Fixes: aac78a44 ("mlxsw: spectrum: Adjust FDB notifications for VLAN devices") Signed-off-by:
-
Ido Schimmel authored
When dumping the hardware FDB we should report entries pointing to VLAN devices with VLAN 0, as packets coming into the bridge are untagged. Likewise, pass FDB_{ADD,DEL} notifications with VLAN 0 for these devices. Fixes: 54a73201 ("mlxsw: spectrum: Adjust switchdev ops for VLAN devices") Signed-off-by: -
Ido Schimmel authored
When we disable learning on bridge port we should still update the software bridge's FDB when entry pointing to this bridge port is aged-out. We can otherwise have an inconsistency between software and hardware tables. Fixes: 8a1ab5d7 ("mlxsw: spectrum: Implement FDB add/remove/dump for LAG") Signed-off-by:
-
Ido Schimmel authored
When port is put into LISTENING state it shouldn't populate the FDB, so set the port's STP state in hardware to DISCARDING instead of LEARNING. It will therefore keep listening to BPDU packets, but discard other non-control packets and won't perform any learning. Fixes: 56ade8fe ("mlxsw: spectrum: Add initial support for Spectrum ASIC") Signed-off-by:
-
Ido Schimmel authored
When STP state is set to DISABLED the port is assumed to be inactive, but currently we forward packets ingressing through it. Instead, set the port's STP state in hardware to DISCARDING, which means it doesn't forward packets or perform any learning, but it does trap control packets. However, these packets will be dropped by bridge code, which results in the expected behavior. Fixes: 56ade8fe ("mlxsw: spectrum: Add initial support for Spectrum ASIC") Signed-off-by:
-
Ido Schimmel authored
As explained in previous commit, we should always take care of flushing the FDB in the driver and not rely on bridge code. We need to distinguish between two cases with regards to LAG: 1) Port is leaving LAG while LAG is bridged (or VLAN devices on top of it). In this case don't flush the FDB entries pointing to the LAG ID, as this will affect other ports still member in the LAG. Only flush the FDB when the last port in the LAG is leaving the bridge. 2) LAG device is leaving the bridge. In this case the CHANGEUPPER event is simply propagated to each member port, so make each port flush the FDB in its turn. Note that emptying a bridged LAG from ports creates an inconsistency between hardware and software. A user who later (< ageing_time) re-populates the LAG won't have any FDB entries pointing to the LAG ID in hardware, but they will be present in the software bridge's FDB. Currently there is no good solution to this problem, but this will be addressed by us in the future. In order to optimize the flushing process, flush by port or LAG ID if there are no VLAN interfaces on top of the port. Otherwise, flush using (Port / LAG ID, FID=VID} for each of the lower 4K FIDs. In the case of VLAN device simply flush using {Port / LAG ID, vFID} with the vFID to which the VLAN device is mapped to. Fixes: 56ade8fe ("mlxsw: spectrum: Add initial support for Spectrum ASIC") Signed-off-by: -
Ido Schimmel authored
When removing a net device from a bridge we should flush the FDB entries associated with this net device. Up until now, we relied upon bridge code to do that for us, but it is possible for user to prevent hardware from syncing with the software bridge (learning_sync=0), so we need to flush overselves. Add the Switch Filtering DB Flush (SFDF) register that is used to flush FDB entries according to different parameters (per-port, per-FID etc). Fixes: 56ade8fe ("mlxsw: spectrum: Add initial support for Spectrum ASIC") Signed-off-by:
-
Ido Schimmel authored
It is possible for a user to remove a port from a LAG device, while the LAG device or VLAN devices on top of it are bridged. In these cases, bridge's teardown sequence is never issued, so we need to take care of it ourselves. When LAG's unlinking event is received by port netdev: 1) Traverse its vPorts list and make those member in a bridge leave it. They will be deleted later by LAG code. 2) Make the port netdev itself leave its bridge if member in one. Fixes: 0d65fc13 ("mlxsw: spectrum: Implement LAG port join/leave") Signed-off-by:
-
- 26 Jan, 2016 3 commits
-
-
Johannes Berg authored
The code within wait_event_interruptible() is called with !TASK_RUNNING, so mustn't call any functions that can sleep, like mutex_lock(). Since we re-check the list_empty() in a loop after the wait, it's safe to simply use list_empty() without locking. This bug has existed forever, but was only discovered now because all userspace implementations, including the default 'rfkill' tool, use poll() or select() to get a readable fd before attempting to read. Cc: stable@vger.kernel.org Fixes: c64fb016 ("rfkill: create useful userspace interface") Reported-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com>
-
Sachin Kulkarni authored
During a sw scan ieee80211_iface_work ignores work items for all vifs. However after the scan complete work is requeued only for STA, ADHOC and MESH iftypes. This occasionally results in event processing getting delayed/not processed for iftype AP when it coexists with a STA. This can result in data halt and eventually disconnection on the AP interface. Cc: stable@vger.kernel.org Signed-off-by:
Sachin Kulkarni <Sachin.Kulkarni@imgtec.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queueDavid S. Miller authored
Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2016-01-25 This series contains updates to i40e only and so I won't continue receiving patches to fix the same issue (again). Arnd fixes the driver from causing the compiler whining about uninitialized variables, so initialize those variables. Eric fixes the build errors/warnings which were introduced by Anjali when she added geneve support to i40e. ==================== Signed-off-by:
-
- 25 Jan, 2016 7 commits
-
-
Arnd Bergmann authored
intel/i40e/i40e_txrx.c: In function 'i40e_xmit_frame_ring': intel/i40e/i40e_txrx.c:2367:20: error: 'oiph' may be used uninitialized in this function [-Werror=maybe-uninitialized] intel/i40e/i40e_txrx.c:2317:16: note: 'oiph' was declared here intel/i40e/i40e_txrx.c:2367:17: error: 'oudph' may be used uninitialized in this function [-Werror=maybe-uninitialized] intel/i40e/i40e_txrx.c:2316:17: note: 'oudph' was declared here Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Eric Dumazet authored
Fixes following build warnings : drivers/net/ethernet/intel/i40e/i40e_main.c:7057:13: warning: 'i40e_sync_udp_filters_subtask' defined but not used [-Wunused-function] drivers/net/ethernet/intel/i40e/i40e_main.c:8524:13: warning: 'i40e_add_vxlan_port' defined but not used [-Wunused-function] drivers/net/ethernet/intel/i40e/i40e_main.c:8569:13: warning: 'i40e_del_vxlan_port' defined but not used [-Wunused-function] drivers/net/ethernet/intel/i40e/i40e_main.c:8604:13: warning: 'i40e_add_geneve_port' defined but not used [-Wunused-function] drivers/net/ethernet/intel/i40e/i40e_main.c:8651:13: warning: 'i40e_del_geneve_port' defined but not used [-Wunused-function] Fixes: 6a899024 ("i40e: geneve tunnel offload support") Signed-off-by:
-
Haiyang Zhang authored
Since eliminating send_completion_tid from struct hv_netvsc_packet, we haven't add proper book keeping for the skb of the batched packet. This patch fixes this issue and allows the previous skb is properly freed. Otherwise, a panic may happen. Thanks to Simon Xiao <sixiao@microsoft.com> for bisecting and analysis. Signed-off-by:
Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by:
K. Y. Srinivasan <kys@microsoft.com> Signed-off-by:
-
Vitaly Kuznetsov authored
Recent changes to 'struct flow_keys' (e.g commit d34af823 ("net: Add VLAN ID to flow_keys")) introduced a performance regression in netvsc driver. Is problem is, however, not the above mentioned commit but the fact that netvsc_set_hash() function did some assumptions on the struct flow_keys data layout and this is wrong. Get rid of netvsc_set_hash() by switching to skb_get_hash(). This change will also imply switching to Jenkins hash from the currently used Toeplitz but it seems there is no good excuse for Toeplitz to stay. Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Acked-by:
-
Thadeu Lima de Souza Cascardo authored
When creating a SIT tunnel with ip tunnel, rtnl_link_ops is not set before ipip6_tunnel_create is called. When register_netdevice is called, there is no linkinfo attribute in the NEWLINK message because of that. Setting rtnl_link_ops before calling register_netdevice fixes that. Signed-off-by:
Thadeu Lima de Souza Cascardo <cascardo@redhat.com> Signed-off-by:
-
Johannes Berg authored
As Arnd Bergmann points out, using CONFIG_ARCH_MXC and/or SOC_IMX28 is wrong if some other ARM platform uses this device - the operation of the driver would depend on an unrelated ARM platform that might or might not be set for multi-platform kernels. Prior to my previous patch, any other platforms using it would have been broken already due to having the cbd_datlen/cbd_sc fields in the wrong order, but byte ordering correctly, so no such platforms can exist and work today. In any case, it seems likely that only Freescale SoCs use this part, and those are little-endian on ARM, so CONFIG_ARM is safe for them. Signed-off-by:
Johannes Berg <johannes@sipsolutions.net> Reviewed-by:
-
Sudip Mukherjee authored
We are getting many build warnings about: 'bar_start' may be used uninitialized and 'bar_len' may be used uninitialized They are not actually uninitialized as dfx_get_bars() will initialize them properly. But still lets have them initialized just to satisfy the compiler (gcc 4.8.2). Signed-off-by:
Sudip Mukherjee <sudip@vectorindia.org> Acked-by:
Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by:
-
