Documentation/networking/e100.rst:57: WARNING: Literal block expected; none found.
    Documentation/networking/e100.rst:68: WARNING: Literal block expected; none found.
    Documentation/networking/e100.rst:75: WARNING: Literal block expected; none found.
    Documentation/networking/e100.rst:84: WARNING: Literal block expected; none found.
    Documentation/networking/e100.rst:93: WARNING: Inline emphasis start-string without end-string.

While here, fix some highlights.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

The ipsec->tx_tbl[] has IXGBE_IPSEC_MAX_SA_COUNT elements so the > needs
to be changed to >= so we don't read one element beyond the end of the
array.

Fixes: 59259470 ("ixgbe: process the Tx ipsec offload")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Shannon Nelson <shannon.nelson@oracle.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

This change makes it so that we are much more explicit about the ordering
of updates to the receive address register (RAR) table. Prior to this patch
I believe we may have been updating the table while entries were still
active, or possibly allowing for reordering of things since we weren't
explicitly flushing writes to either the lower or upper portion of the
register prior to accessing the other half.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Reviewed-by: Shannon Nelson <shannon.nelson@oracle.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Trivial fix to spelling mistake in qed_probe message.
Signed-off-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

It was been observed that with a particular order of initialisation,
the netdev can be up, but the SFP module still has its TX_DISABLE
signal asserted.  This occurs when the network device brought up before
the SFP kernel module has been inserted by userspace.

This occurs because sfp-bus layer does not hear about the change in
network device state, and so assumes that it is still down.  Set
netdev->sfp when the upstream is registered to work around this problem.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

We fail to correctly clean up after a bus registration failure, which
can lead to an incorrect assumption about the registration state of
the upstream or sfp cage.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

rhashtable_free_and_destroy() cancels re-hash deferred work
then walks and destroys elements. at this moment, some elements can be
still in future_tbl. that elements are not destroyed.

test case:
nft_rhash_destroy() calls rhashtable_free_and_destroy() to destroy
all elements of sets before destroying sets and chains.
But rhashtable_free_and_destroy() doesn't destroy elements of future_tbl.
so that splat occurred.

test script:
   %cat test.nft
   table ip aa {
	   map map1 {
		   type ipv4_addr : verdict;
		   elements = {
			   0 : jump a0,
			   1 : jump a0,
			   2 : jump a0,
			   3 : jump a0,
			   4 : jump a0,
			   5 : jump a0,
			   6 : jump a0,
			   7 : jump a0,
			   8 : jump a0,
			   9 : jump a0,
		}
	   }
	   chain a0 {
	   }
   }
   flush ruleset
   table ip aa {
	   map map1 {
		   type ipv4_addr : verdict;
		   elements = {
			   0 : jump a0,
			   1 : jump a0,
			   2 : jump a0,
			   3 : jump a0,
			   4 : jump a0,
			   5 : jump a0,
			   6 : jump a0,
			   7 : jump a0,
			   8 : jump a0,
			   9 : jump a0,
		   }
	   }
	   chain a0 {
	   }
   }
   flush ruleset

   %while :; do nft -f test.nft; done

Splat looks like:
[  200.795603] kernel BUG at net/netfilter/nf_tables_api.c:1363!
[  200.806944] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI
[  200.812253] CPU: 1 PID: 1582 Comm: nft Not tainted 4.17.0+ #24
[  200.820297] Hardware name: To be filled by O.E.M. To be filled by O.E.M./Aptio CRB, BIOS 5.6.5 07/08/2015
[  200.830309] RIP: 0010:nf_tables_chain_destroy.isra.34+0x62/0x240 [nf_tables]
[  200.838317] Code: 43 50 85 c0 74 26 48 8b 45 00 48 8b 4d 08 ba 54 05 00 00 48 c7 c6 60 6d 29 c0 48 c7 c7 c0 65 29 c0 4c 8b 40 08 e8 58 e5 fd f8 <0f> 0b 48 89 da 48 b8 00 00 00 00 00 fc ff
[  200.860366] RSP: 0000:ffff880118dbf4d0 EFLAGS: 00010282
[  200.866354] RAX: 0000000000000061 RBX: ffff88010cdeaf08 RCX: 0000000000000000
[  200.874355] RDX: 0000000000000061 RSI: 0000000000000008 RDI: ffffed00231b7e90
[  200.882361] RBP: ffff880118dbf4e8 R08: ffffed002373bcfb R09: ffffed002373bcfa
[  200.890354] R10: 0000000000000000 R11: ffffed002373bcfb R12: dead000000000200
[  200.898356] R13: dead000000000100 R14: ffffffffbb62af38 R15: dffffc0000000000
[  200.906354] FS:  00007fefc31fd700(0000) GS:ffff88011b800000(0000) knlGS:0000000000000000
[  200.915533] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  200.922355] CR2: 0000557f1c8e9128 CR3: 0000000106880000 CR4: 00000000001006e0
[  200.930353] Call Trace:
[  200.932351]  ? nf_tables_commit+0x26f6/0x2c60 [nf_tables]
[  200.939525]  ? nf_tables_setelem_notify.constprop.49+0x1a0/0x1a0 [nf_tables]
[  200.947525]  ? nf_tables_delchain+0x6e0/0x6e0 [nf_tables]
[  200.952383]  ? nft_add_set_elem+0x1700/0x1700 [nf_tables]
[  200.959532]  ? nla_parse+0xab/0x230
[  200.963529]  ? nfnetlink_rcv_batch+0xd06/0x10d0 [nfnetlink]
[  200.968384]  ? nfnetlink_net_init+0x130/0x130 [nfnetlink]
[  200.975525]  ? debug_show_all_locks+0x290/0x290
[  200.980363]  ? debug_show_all_locks+0x290/0x290
[  200.986356]  ? sched_clock_cpu+0x132/0x170
[  200.990352]  ? find_held_lock+0x39/0x1b0
[  200.994355]  ? sched_clock_local+0x10d/0x130
[  200.999531]  ? memset+0x1f/0x40

V2:
 - free all tables requested by Herbert Xu
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

Michael Chan says:

====================
bnxt_en: Bug fixes.

These are bug fixes in error code paths, TC Flower VLAN TCI flow
checking bug fix, proper filtering of Broadcast packets if IFF_BROADCAST
is not set, and a bug fix in bnxt_get_max_rings() to return 0 ring
parameters when the return value is -ENOMEM.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix bug in the error code path when bnxt_request_irq() returns failure.
bnxt_disable_napi() should not be called in this error path because
NAPI has not been enabled yet.

Fixes: c0c050c5 ("bnxt_en: New Broadcom ethernet driver.")
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Calling bnxt_set_max_func_irqs() to modify the max IRQ count requested or
freed by the RDMA driver is flawed.  The max IRQ count is checked when
re-initializing the IRQ vectors and this can happen multiple times
during ifup or ethtool -L.  If the max IRQ is reduced and the RDMA
driver is operational, we may not initailize IRQs correctly.  This
problem shows up on VFs with very small number of MSIX.

There is no other logic that relies on the IRQ count excluding the ones
used by RDMA.  So we fix it by just removing the call to subtract or
add the IRQs used by RDMA.

Fixes: a588e458 ("bnxt_en: Add interface to support RDMA driver.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, the driver assumes IFF_BROADCAST is always set and always sets
the broadcast filter.  Modify the code to set or clear the broadcast
filter according to the IFF_BROADCAST flag.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The current code returns -ENOMEM and does not bother to set the output
parameters to 0 when no rings are available.  Some callers, such as
bnxt_get_channels() will display garbage ring numbers when that happens.
Fix it by always setting the output parameters.

Fixes: 6e6c5a57 ("bnxt_en: Modify bnxt_get_max_rings() to support shared or non shared rings.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If there aren't enough RX rings available, the driver will attempt to
use a single RX ring without the aggregation ring.  If that also
fails, the BNXT_FLAG_AGG_RINGS flag is cleared but the other ring
parameters are not set consistently to reflect that.  If more RX
rings become available at the next open, the RX rings will be in
an inconsistent state and may crash when freeing the RX rings.

Fix it by restoring the BNXT_FLAG_AGG_RINGS if not enough RX rings are
available to run without aggregation rings.

Fixes: bdbd1eb5 ("bnxt_en: Handle no aggregation ring gracefully.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

It is possible that OVS may set don’t care for DEI/CFI bit in
vlan_tci mask. Hence, checking for vlan_tci exact match will endup
in a vlan flow rejection.

This patch fixes the problem by checking for vlan_pcp and vid
separately, instead of checking for the entire vlan_tci.

Fixes: e85a9be9 (bnxt_en: do not allow wildcard matches for L2 flows)
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for your net tree:

1) Missing module autoloadfor icmp and icmpv6 x_tables matches,
   from Florian Westphal.

2) Possible non-linear access to TCP header from tproxy, from
   Mate Eckl.

3) Do not allow rbtree to be used for single elements, this patch
   moves all set backend into one single module since such thing
   can only happen if hashtable module is explicitly blacklisted,
   which should not ever be done.

4) Reject error and standard targets from nft_compat for sanity
   reasons, they are never used from there.

5) Don't crash on double hashsize module parameter, from Andrey
   Ryabinin.

6) Drop dst on skb before placing it in the fragmentation
   reassembly queue, from Florian Westphal.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Eric Dumazet reports:
 Here is a reproducer of an annoying bug detected by syzkaller on our production kernel
 [..]
 ./b78305423 enable_conntrack
 Then :
 sleep 60
 dmesg | tail -10
 [  171.599093] unregister_netdevice: waiting for lo to become free. Usage count = 2
 [  181.631024] unregister_netdevice: waiting for lo to become free. Usage count = 2
 [  191.687076] unregister_netdevice: waiting for lo to become free. Usage count = 2
 [  201.703037] unregister_netdevice: waiting for lo to become free. Usage count = 2
 [  211.711072] unregister_netdevice: waiting for lo to become free. Usage count = 2
 [  221.959070] unregister_netdevice: waiting for lo to become free. Usage count = 2

Reproducer sends ipv6 fragment that hits nfct defrag via LOCAL_OUT hook.
skb gets queued until frag timer expiry -- 1 minute.

Normally nf_conntrack_reasm gets called during prerouting, so skb has
no dst yet which might explain why this wasn't spotted earlier.
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Reported-by: John Sperbeck <jsperbeck@google.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Tested-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Loading the nf_conntrack module with doubled hashsize parameter, i.e.
	  modprobe nf_conntrack hashsize=12345 hashsize=12345
causes NULL-ptr deref.

If 'hashsize' specified twice, the nf_conntrack_set_hashsize() function
will be called also twice.
The first nf_conntrack_set_hashsize() call will set the
'nf_conntrack_htable_size' variable:

	nf_conntrack_set_hashsize()
		...
		/* On boot, we can set this without any fancy locking. */
		if (!nf_conntrack_htable_size)
			return param_set_uint(val, kp);

But on the second invocation, the nf_conntrack_htable_size is already set,
so the nf_conntrack_set_hashsize() will take a different path and call
the nf_conntrack_hash_resize() function. Which will crash on the attempt
to dereference 'nf_conntrack_hash' pointer:

	BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
	RIP: 0010:nf_conntrack_hash_resize+0x255/0x490 [nf_conntrack]
	Call Trace:
	 nf_conntrack_set_hashsize+0xcd/0x100 [nf_conntrack]
	 parse_args+0x1f9/0x5a0
	 load_module+0x1281/0x1a50
	 __se_sys_finit_module+0xbe/0xf0
	 do_syscall_64+0x7c/0x390
	 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Fix this, by checking !nf_conntrack_hash instead of
!nf_conntrack_htable_size. nf_conntrack_hash will be initialized only
after the module loaded, so the second invocation of the
nf_conntrack_set_hashsize() won't crash, it will just reinitialize
nf_conntrack_htable_size again.
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

iptables-nft never requests these, but make this explicitly illegal.
If it were quested, kernel could oops as ->eval is NULL, furthermore,
the builtin targets have no owning module so its possible to rmmod
eb/ip/ip6_tables module even if they would be loaded.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

tcp_zerocopy_receive() relies on tcp_inq() to limit number of bytes
requested by user.

syzbot found that after tcp_disconnect(), tcp_inq() was returning
a stale value (number of bytes in queue before the disconnect).

Note that after this patch, ioctl(fd, SIOCINQ, &val) is also fixed
and returns 0, so this might be a candidate for all known linux kernels.

While we are at this, we probably also should clear urg_data to
avoid other syzkaller reports after it discovers how to deal with
urgent data.

syzkaller repro :

socket(PF_INET, SOCK_STREAM, IPPROTO_IP) = 3
bind(3, {sa_family=AF_INET, sin_port=htons(20000), sin_addr=inet_addr("224.0.0.1")}, 16) = 0
connect(3, {sa_family=AF_INET, sin_port=htons(20000), sin_addr=inet_addr("127.0.0.1")}, 16) = 0
send(3, ..., 4096, 0) = 4096
connect(3, {sa_family=AF_UNSPEC, sa_data="\0\0\0\0\0\0\0\0\0\0\0\0\0\0"}, 128) = 0
getsockopt(3, SOL_TCP, TCP_ZEROCOPY_RECEIVE, ..., [16]) = 0 // CRASH

Fixes: 05255b82 ("tcp: add TCP_ZEROCOPY_RECEIVE support for zerocopy receive")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Alexei Starovoitov says:

====================
pull-request: bpf 2018-07-07

The following pull-request contains BPF updates for your *net* tree.

Plenty of fixes for different components:

1) A set of critical fixes for sockmap and sockhash, from John Fastabend.

2) fixes for several race conditions in af_xdp, from Magnus Karlsson.

3) hash map refcnt fix, from Mauricio Vasquez.

4) samples/bpf fixes, from Taeung Song.

5) ifup+mtu check for xdp_redirect, from Toshiaki Makita.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Setting the low threshold to 0 has no effect on frags allocation,
we need to clear high_thresh instead.

The code was pre-existent to commit 648700f7 ("inet: frags:
use rhashtables for reassembly units"), but before the above,
such assignment had a different role: prevent concurrent eviction
from the worker and the netns cleanup helper.

Fixes: 648700f7 ("inet: frags: use rhashtables for reassembly units")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When tcp_diag_destroy closes a TCP_NEW_SYN_RECV socket, it first
frees it by calling inet_csk_reqsk_queue_drop_and_and_put in
tcp_abort, and then frees it again by calling sock_gen_put.

Since tcp_abort only has one caller, and all the other codepaths
in tcp_abort don't free the socket, just remove the free in that
function.

Cc: David Ahern <dsa@cumulusnetworks.com>
Tested: passes Android sock_diag_test.py, which exercises this codepath
Fixes: d7226c7a ("net: diag: Fix refcnt leak in error path destroying socket")
Signed-off-by: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsa@cumulusnetworks.com>
Tested-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Xin reported that icmp replies may not use the address on the device the
echo request is received if the destination address is broadcast. Instead
a route lookup is done without considering VRF context. Fix by setting
oif in flow struct to the master device if it is enslaved. That directs
the lookup to the VRF table. If the device is not enslaved, oif is still
0 so no affect.

Fixes: cd2fbe1b ("net: Use VRF device index for lookups on RX")
Reported-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Otherwise we end up with attempting to send packets from down devices
or to send oversized packets, which may cause unexpected driver/device
behaviour. Generic XDP has already done this check, so reuse the logic
in native XDP.

Fixes: 814abfab ("xdp: add bpf_redirect helper function")
Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

John Fastabend says:

====================
First three patches resolve issues found while testing sockhash and
reviewing code. Syzbot also found them about the same time as I was
working on fixes. The main issue is in the sockhash path we reduced
the scope of sk_callback lock but this meant we could get update and
close running in parallel so fix that here.

Then testing sk_msg and sk_skb programs together found that skb->dev
is not always assigned and some of the helpers were depending on this
to lookup max mtu. Fix this by using SKB_MAX_ALLOC when no MTU is
available.

Finally, Martin spotted that the sockmap code was still using the
qdisc skb cb structure. But I was sure we had fixed this long ago.
Looks like we missed it in a merge conflict resolution and then by
chance data_end offset was the same in both structures so everything
sort of continued to work even though it could break at any moment
if the structs ever change. So redo the conversion and this time
also convert the helpers.

v2: fix '0 files changed' issue in patches
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

In commit

  'bpf: bpf_compute_data uses incorrect cb structure' (8108a775)

we added the routine bpf_compute_data_end_sk_skb() to compute the
correct data_end values, but this has since been lost. In kernel
v4.14 this was correct and the above patch was applied in it
entirety. Then when v4.14 was merged into v4.15-rc1 net-next tree
we lost the piece that renamed bpf_compute_data_pointers to the
new function bpf_compute_data_end_sk_skb. This was done here,

e1ea2f98 ("Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net")

When it conflicted with the following rename patch,

6aaae2b6 ("bpf: rename bpf_compute_data_end into bpf_compute_data_pointers")

Finally, after a refactor I thought even the function
bpf_compute_data_end_sk_skb() was no longer needed and it was
erroneously removed.

However, we never reverted the sk_skb_convert_ctx_access() usage of
tcp_skb_cb which had been committed and survived the merge conflict.
Here we fix this by adding back the helper and *_data_end_sk_skb()
usage. Using the bpf_skc_data_end mapping is not correct because it
expects a qdisc_skb_cb object but at the sock layer this is not the
case. Even though it happens to work here because we don't overwrite
any data in-use at the socket layer and the cb structure is cleared
later this has potential to create some subtle issues. But, even
more concretely the filter.c access check uses tcp_skb_cb.

And by some act of chance though,

struct bpf_skb_data_end {
        struct qdisc_skb_cb        qdisc_cb;             /*     0    28 */

        /* XXX 4 bytes hole, try to pack */

        void *                     data_meta;            /*    32     8 */
        void *                     data_end;             /*    40     8 */

        /* size: 48, cachelines: 1, members: 3 */
        /* sum members: 44, holes: 1, sum holes: 4 */
        /* last cacheline: 48 bytes */
};

and then tcp_skb_cb,

struct tcp_skb_cb {
	[...]
                struct {
                        __u32      flags;                /*    24     4 */
                        struct sock * sk_redir;          /*    32     8 */
                        void *     data_end;             /*    40     8 */
                } bpf;                                   /*          24 */
        };

So when we use offset_of() to track down the byte offset we get 40 in
either case and everything continues to work. Fix this mess and use
correct structures its unclear how long this might actually work for
until someone moves the structs around.
Reported-by: Martin KaFai Lau <kafai@fb.com>
Fixes: e1ea2f98 ("Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net")
Fixes: 6aaae2b6 ("bpf: rename bpf_compute_data_end into bpf_compute_data_pointers")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Currently, when a sock is closed and the bpf_tcp_close() callback is
used we remove memory but do not free the skb. Call consume_skb() if
the skb is attached to the buffer.

Reported-by: syzbot+d464d2c20c717ef5a6a8@syzkaller.appspotmail.com
Fixes: 1aa12bdf ("bpf: sockmap, add sock close() hook to remove socks")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

After latest lock updates there is no longer anything preventing a
close and recvmsg call running in parallel. Additionally, we can
race update with close if we close a socket and simultaneously update
if via the BPF userspace API (note the cgroup ops are already run
with sock_lock held).

To resolve this take sock_lock in close and update paths.

Reported-by: syzbot+b680e42077a0d7c9a0c4@syzkaller.appspotmail.com
Fixes: e9db4ef6 ("bpf: sockhash fix omitted bucket lock in sock_close")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Multiple BPF helpers in use by sk_skb programs calculate the max
skb length using the __bpf_skb_max_len function. However, this
calculates the max length using the skb->dev pointer which can be
NULL when an sk_skb program is paired with an sk_msg program.

To force this a sk_msg program needs to redirect into the ingress
path of a sock with an attach sk_skb program. Then the the sk_skb
program would need to call one of the helpers that adjust the skb
size.

To fix the null ptr dereference use SKB_MAX_ALLOC size if no dev
is available.

Fixes: 8934ce2f ("bpf: sockmap redirect ingress support")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

John Fastabend says:

====================
I missed fixing the error path in the sockhash code to align with
supporting socks in multiple maps. Simply checking if the psock is
present does not mean we can decrement the reference count because
it could be part of another map. Fix this by cleaning up the error
path so this situation does not happen.
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

This removes locking from readers of RCU hash table. Its not
necessary.

Fixes: 81110384 ("bpf: sockmap, add hash map support")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

The current code, in the error path of sock_hash_ctx_update_elem,
checks if the sock has a psock in the user data and if so decrements
the reference count of the psock. However, if the error happens early
in the error path we may have never incremented the psock reference
count and if the psock exists because the sock is in another map then
we may inadvertently decrement the reference count.

Fix this by making the error path only call smap_release_sock if the
error happens after the increment.

Reported-by: syzbot+d464d2c20c717ef5a6a8@syzkaller.appspotmail.com
Fixes: 81110384 ("bpf: sockmap, add hash map support")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Davide Caratti says:

====================
net/sched: fix NULL dereference in 'goto chain' control action

in a couple of TC actions (i.e. csum and tunnel_key), the control action
is stored together with the action-specific configuration data.
This avoids a race condition (see [1]), but it causes a crash when 'goto
chain' is used with the above actions. Since this race condition is
tolerated on the other TC actions (it's present even on actions where the
spinlock is still used), storing the control action in the common area
should be acceptable for tunnel_key and csum as well.

[1] https://www.spinics.net/lists/netdev/msg472047.html
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

the control action in the common member of struct tcf_tunnel_key must be a
valid value, as it can contain the chain index when 'goto chain' is used.
Ensure that the control action can be read as x->tcfa_action, when x is a
pointer to struct tc_action and x->ops->type is TCA_ACT_TUNNEL_KEY, to
prevent the following command:

 # tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \
 > $tcflags dst_mac $h2mac action tunnel_key unset goto chain 1

from causing a NULL dereference when a matching packet is received:

 BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
 PGD 80000001097ac067 P4D 80000001097ac067 PUD 103b0a067 PMD 0
 Oops: 0000 [#1] SMP PTI
 CPU: 0 PID: 3491 Comm: mausezahn Tainted: G            E     4.18.0-rc2.auguri+ #421
 Hardware name: Hewlett-Packard HP Z220 CMT Workstation/1790, BIOS K51 v01.58 02/07/2013
 RIP: 0010:tcf_action_exec+0xb8/0x100
 Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3
 RSP: 0018:ffff95145ea03c40 EFLAGS: 00010246
 RAX: 0000000020000001 RBX: ffff9514499e5800 RCX: 0000000000000001
 RDX: 0000000000000000 RSI: 0000000000000002 RDI: 0000000000000000
 RBP: ffff95145ea03e60 R08: 0000000000000000 R09: ffff95145ea03c9c
 R10: ffff95145ea03c78 R11: 0000000000000008 R12: ffff951456a69800
 R13: ffff951456a69808 R14: 0000000000000001 R15: ffff95144965ee40
 FS:  00007fd67ee11740(0000) GS:ffff95145ea00000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000000000000 CR3: 00000001038a2006 CR4: 00000000001606f0
 Call Trace:
  <IRQ>
  fl_classify+0x1ad/0x1c0 [cls_flower]
  ? __update_load_avg_se.isra.47+0x1ca/0x1d0
  ? __update_load_avg_se.isra.47+0x1ca/0x1d0
  ? update_load_avg+0x665/0x690
  ? update_load_avg+0x665/0x690
  ? kmem_cache_alloc+0x38/0x1c0
  tcf_classify+0x89/0x140
  __netif_receive_skb_core+0x5ea/0xb70
  ? enqueue_entity+0xd0/0x270
  ? process_backlog+0x97/0x150
  process_backlog+0x97/0x150
  net_rx_action+0x14b/0x3e0
  __do_softirq+0xde/0x2b4
  do_softirq_own_stack+0x2a/0x40
  </IRQ>
  do_softirq.part.18+0x49/0x50
  __local_bh_enable_ip+0x49/0x50
  __dev_queue_xmit+0x4ab/0x8a0
  ? wait_woken+0x80/0x80
  ? packet_sendmsg+0x38f/0x810
  ? __dev_queue_xmit+0x8a0/0x8a0
  packet_sendmsg+0x38f/0x810
  sock_sendmsg+0x36/0x40
  __sys_sendto+0x10e/0x140
  ? do_vfs_ioctl+0xa4/0x630
  ? syscall_trace_enter+0x1df/0x2e0
  ? __audit_syscall_exit+0x22a/0x290
  __x64_sys_sendto+0x24/0x30
  do_syscall_64+0x5b/0x180
  entry_SYSCALL_64_after_hwframe+0x44/0xa9
 RIP: 0033:0x7fd67e18dc93
 Code: 48 8b 0d 18 83 20 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d 59 c7 20 00 00 75 13 49 89 ca b8 2c 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 34 c3 48 83 ec 08 e8 2b f7 ff ff 48 89 04 24
 RSP: 002b:00007ffe0189b748 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
 RAX: ffffffffffffffda RBX: 00000000020ca010 RCX: 00007fd67e18dc93
 RDX: 0000000000000062 RSI: 00000000020ca322 RDI: 0000000000000003
 RBP: 00007ffe0189b780 R08: 00007ffe0189b760 R09: 0000000000000014
 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000062
 R13: 00000000020ca322 R14: 00007ffe0189b760 R15: 0000000000000003
 Modules linked in: act_tunnel_key act_gact cls_flower sch_ingress vrf veth act_csum(E) xt_CHECKSUM iptable_mangle ipt_MASQUERADE iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ipt_REJECT nf_reject_ipv4 tun bridge stp llc ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter intel_rapl snd_hda_codec_hdmi x86_pkg_temp_thermal intel_powerclamp snd_hda_codec_realtek coretemp snd_hda_codec_generic kvm_intel kvm irqbypass snd_hda_intel crct10dif_pclmul crc32_pclmul hp_wmi ghash_clmulni_intel pcbc snd_hda_codec aesni_intel sparse_keymap rfkill snd_hda_core snd_hwdep snd_seq crypto_simd iTCO_wdt gpio_ich iTCO_vendor_support wmi_bmof cryptd mei_wdt glue_helper snd_seq_device snd_pcm pcspkr snd_timer snd i2c_i801 lpc_ich sg soundcore wmi mei_me
  mei ie31200_edac nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs libcrc32c sd_mod sr_mod cdrom i915 video i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ahci crc32c_intel libahci serio_raw sfc libata mtd drm ixgbe mdio i2c_core e1000e dca
 CR2: 0000000000000000
 ---[ end trace 1ab8b5b5d4639dfc ]---
 RIP: 0010:tcf_action_exec+0xb8/0x100
 Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3
 RSP: 0018:ffff95145ea03c40 EFLAGS: 00010246
 RAX: 0000000020000001 RBX: ffff9514499e5800 RCX: 0000000000000001
 RDX: 0000000000000000 RSI: 0000000000000002 RDI: 0000000000000000
 RBP: ffff95145ea03e60 R08: 0000000000000000 R09: ffff95145ea03c9c
 R10: ffff95145ea03c78 R11: 0000000000000008 R12: ffff951456a69800
 R13: ffff951456a69808 R14: 0000000000000001 R15: ffff95144965ee40
 FS:  00007fd67ee11740(0000) GS:ffff95145ea00000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000000000000 CR3: 00000001038a2006 CR4: 00000000001606f0
 Kernel panic - not syncing: Fatal exception in interrupt
 Kernel Offset: 0x11400000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff)
 ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]---

Fixes: d0f6dd8a ("net/sched: Introduce act_tunnel_key")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

the control action in the common member of struct tcf_csum must be a valid
value, as it can contain the chain index when 'goto chain' is used. Ensure
that the control action can be read as x->tcfa_action, when x is a pointer
to struct tc_action and x->ops->type is TCA_ACT_CSUM, to prevent the
following command:

  # tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \
  > $tcflags dst_mac $h2mac action csum ip or tcp or udp or sctp goto chain 1

from triggering a NULL pointer dereference when a matching packet is
received.

 BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
 PGD 800000010416b067 P4D 800000010416b067 PUD 1041be067 PMD 0
 Oops: 0000 [#1] SMP PTI
 CPU: 0 PID: 3072 Comm: mausezahn Tainted: G            E     4.18.0-rc2.auguri+ #421
 Hardware name: Hewlett-Packard HP Z220 CMT Workstation/1790, BIOS K51 v01.58 02/07/2013
 RIP: 0010:tcf_action_exec+0xb8/0x100
 Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3
 RSP: 0018:ffffa020dea03c40 EFLAGS: 00010246
 RAX: 0000000020000001 RBX: ffffa020d7ccef00 RCX: 0000000000000054
 RDX: 0000000000000000 RSI: ffffa020ca5ae000 RDI: ffffa020d7ccef00
 RBP: ffffa020dea03e60 R08: 0000000000000000 R09: ffffa020dea03c9c
 R10: ffffa020dea03c78 R11: 0000000000000008 R12: ffffa020d3fe4f00
 R13: ffffa020d3fe4f08 R14: 0000000000000001 R15: ffffa020d53ca300
 FS:  00007f5a46942740(0000) GS:ffffa020dea00000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000000000000 CR3: 0000000104218002 CR4: 00000000001606f0
 Call Trace:
  <IRQ>
  fl_classify+0x1ad/0x1c0 [cls_flower]
  ? arp_rcv+0x121/0x1b0
  ? __x2apic_send_IPI_dest+0x40/0x40
  ? smp_reschedule_interrupt+0x1c/0xd0
  ? reschedule_interrupt+0xf/0x20
  ? reschedule_interrupt+0xa/0x20
  ? device_is_rmrr_locked+0xe/0x50
  ? iommu_should_identity_map+0x49/0xd0
  ? __intel_map_single+0x30/0x140
  ? e1000e_update_rdt_wa.isra.52+0x22/0xb0 [e1000e]
  ? e1000_alloc_rx_buffers+0x233/0x250 [e1000e]
  ? kmem_cache_alloc+0x38/0x1c0
  tcf_classify+0x89/0x140
  __netif_receive_skb_core+0x5ea/0xb70
  ? enqueue_task_fair+0xb6/0x7d0
  ? process_backlog+0x97/0x150
  process_backlog+0x97/0x150
  net_rx_action+0x14b/0x3e0
  __do_softirq+0xde/0x2b4
  do_softirq_own_stack+0x2a/0x40
  </IRQ>
  do_softirq.part.18+0x49/0x50
  __local_bh_enable_ip+0x49/0x50
  __dev_queue_xmit+0x4ab/0x8a0
  ? wait_woken+0x80/0x80
  ? packet_sendmsg+0x38f/0x810
  ? __dev_queue_xmit+0x8a0/0x8a0
  packet_sendmsg+0x38f/0x810
  sock_sendmsg+0x36/0x40
  __sys_sendto+0x10e/0x140
  ? do_vfs_ioctl+0xa4/0x630
  ? syscall_trace_enter+0x1df/0x2e0
  ? __audit_syscall_exit+0x22a/0x290
  __x64_sys_sendto+0x24/0x30
  do_syscall_64+0x5b/0x180
  entry_SYSCALL_64_after_hwframe+0x44/0xa9
 RIP: 0033:0x7f5a45cbec93
 Code: 48 8b 0d 18 83 20 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d 59 c7 20 00 00 75 13 49 89 ca b8 2c 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 34 c3 48 83 ec 08 e8 2b f7 ff ff 48 89 04 24
 RSP: 002b:00007ffd0ee6d748 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
 RAX: ffffffffffffffda RBX: 0000000001161010 RCX: 00007f5a45cbec93
 RDX: 0000000000000062 RSI: 0000000001161322 RDI: 0000000000000003
 RBP: 00007ffd0ee6d780 R08: 00007ffd0ee6d760 R09: 0000000000000014
 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000062
 R13: 0000000001161322 R14: 00007ffd0ee6d760 R15: 0000000000000003
 Modules linked in: act_csum act_gact cls_flower sch_ingress vrf veth act_tunnel_key(E) xt_CHECKSUM iptable_mangle ipt_MASQUERADE iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ipt_REJECT nf_reject_ipv4 tun bridge stp llc ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel snd_hda_codec_hdmi snd_hda_codec_realtek kvm snd_hda_codec_generic hp_wmi iTCO_wdt sparse_keymap rfkill mei_wdt iTCO_vendor_support wmi_bmof gpio_ich irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc aesni_intel snd_hda_intel crypto_simd cryptd snd_hda_codec glue_helper snd_hda_core snd_hwdep snd_seq snd_seq_device snd_pcm pcspkr i2c_i801 snd_timer snd sg lpc_ich soundcore wmi mei_me
  mei ie31200_edac nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs libcrc32c sr_mod cdrom sd_mod ahci libahci crc32c_intel i915 ixgbe serio_raw libata video dca i2c_algo_bit sfc drm_kms_helper syscopyarea mtd sysfillrect mdio sysimgblt fb_sys_fops drm e1000e i2c_core
 CR2: 0000000000000000
 ---[ end trace 3c9e9d1a77df4026 ]---
 RIP: 0010:tcf_action_exec+0xb8/0x100
 Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3
 RSP: 0018:ffffa020dea03c40 EFLAGS: 00010246
 RAX: 0000000020000001 RBX: ffffa020d7ccef00 RCX: 0000000000000054
 RDX: 0000000000000000 RSI: ffffa020ca5ae000 RDI: ffffa020d7ccef00
 RBP: ffffa020dea03e60 R08: 0000000000000000 R09: ffffa020dea03c9c
 R10: ffffa020dea03c78 R11: 0000000000000008 R12: ffffa020d3fe4f00
 R13: ffffa020d3fe4f08 R14: 0000000000000001 R15: ffffa020d53ca300
 FS:  00007f5a46942740(0000) GS:ffffa020dea00000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000000000000 CR3: 0000000104218002 CR4: 00000000001606f0
 Kernel panic - not syncing: Fatal exception in interrupt
 Kernel Offset: 0x26400000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff)
 ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]---

Fixes: 9c5f69bb ("net/sched: act_csum: don't use spinlock in the fast path")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

GEM version in ZynqMP and most versions greater than r1p07 supports
TX and RX BD prefetch. The number of BDs that can be prefetched is a
HW configurable parameter. For ZynqMP, this parameter is 4.

When GEM DMA is accessing the last BD in the ring, even before the
BD is processed and the WRAP bit is noticed, it will have prefetched
BDs outside the BD ring. These will not be processed but it is
necessary to have accessible memory after the last BD. Especially
in cases where SMMU is used, memory locations immediately after the
last BD may not have translation tables triggering HRESP errors. Hence
always allocate extra BDs to accommodate for prefetch.
The value of tx/rx bd prefetch for any given SoC version is:
2 ^ (corresponding field in design config 10 register).
(value of this field >= 1)

Added a capability flag so that older IP versions that do not have
DCFG10 or this prefetch capability are not affected.
Signed-off-by: Harini Katakam <harini.katakam@xilinx.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

rx ring is allocated for all queues in macb_alloc_consistent.
Free the same for all queues instead of just Q0.
Signed-off-by: Harini Katakam <harini.katakam@xilinx.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

smc_release() calls a sock_put() for smc fallback sockets to cover
the passive closing sock_hold() in __smc_connect() and
smc_tcp_listen_work(). This does not make sense for sockets in state
SMC_LISTEN and SMC_INIT.
An SMC socket stays in state SMC_INIT if connect fails. The sock_put
in smc_connect_abort() does not cover all failures. Move it into
smc_connect_decline_fallback().

Fixes: ee9dfbef ("net/smc: handle sockopts forcing fallback")
Reported-by: syzbot+3a0748c8f2f210c0ef9b@syzkaller.appspotmail.com
Reported-by: syzbot+9e60d2428a42049a592a@syzkaller.appspotmail.com
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

These two functions return the regular -EINVAL failure in the normal
code path, but return a nonstandard '-1' error otherwise, which gets
interpreted as -EPERM.

Let's change it to -EINVAL for the dummy functions as well.

Fixes: 4d4fd361 ("net: bridge: Publish bridge accessor functions")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

t4_get_flash_params() fails in a fatal fashion if the FLASH part isn't
one of the recognized parts. But this leads to desperate efforts to update
drivers when various FLASH parts which we are using suddenly become
unavailable and we need to substitute new FLASH parts.  This has lead to
more than one Customer Field Emergency when a Customer has an old driver
and suddenly can't use newly shipped adapters.

This commit fixes this by simply assuming that the FLASH part is 4MB in
size if it can't be identified. Note that all Chelsio adapters will have
flash parts which are at least 4MB in size.
Signed-off-by: Casey Leedom <leedom@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>