- 05 Nov, 2014 3 commits
-
-
Alexander Aring authored
This patch moves and rename the mac802154_del_iface function into iface.c and rename the function to ieee802154_if_remove which is a similar naming convention like mac80211. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Alexander Aring authored
The include/net/nl802154.h file contains a lot of prototypes which are not used inside of ieee802154 subsystem. This patch removes this file and make the only one used prototype "ieee802154_nl_start_confirm" as static declaration in ieee802154/nl-mac.c Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Alexander Aring authored
This patch reworks the wpan_phy index incrementation. It's now similar like wireless wiphy index incrementation. We move the wpan_phy index attribute inside of cfg802154_registered_device and use atomic operations instead locking mechanism via wpan_phy_mutex. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
- 04 Nov, 2014 3 commits
-
-
Dan Carpenter authored
The ieee802154_is_valid_extended_addr() always returns true because there is a typo. The || should be &&. Neither 0x0000000000000000ULL nor 0xffffffffffffffffULL are valid addresses. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Simon Vincent authored
If you use RAW sockets the transport header offset is not set by the ipv6 stack so when we get to the udp header compression it does not compress the right part of the packet. This patch adds a check for this scenario and sets the transport header offset. Signed-off-by: Simon Vincent <simon.vincent@xsilon.com> Acked-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Johan Hedberg authored
This patch fixes the following sparse warnings in rfcomm/core.c: net/bluetooth/rfcomm/core.c:391:16: warning: dubious: x | !y net/bluetooth/rfcomm/core.c:546:24: warning: dubious: x | !y Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
- 03 Nov, 2014 7 commits
-
-
Alexander Aring authored
This patch adds an ieee802154_ptr to the net_device structure. Furthermore the 802.15.4 subsystem will introduce a nl802154 framework which is similar like the nl80211 framework and a wpan_dev structure. The wpan_dev structure will hold additional net_device attributes like address options which are 802.15.4 specific. In the upcoming nl802154 implementation we will introduce a NL802154_FLAG_NEED_WPAN_DEV like NL80211_FLAG_NEED_WDEV. For this flag an ieee802154_ptr in net_device is needed. Additional we can access the wpan_dev attributes in upper layers like IEEE 802.15.4 6LoWPAN easily. Current solution is a complicated callback interface and getting these values over subif data structure in mac802154. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Szymon Janc authored
According to Management Interface API 'Start Discovery' command should generate a Command Complete event on failure. Currently kernel is sending Command Status on early errors. This results in userspace ignoring such event due to invalid size. bluetoothd[28499]: src/adapter.c:trigger_start_discovery() bluetoothd[28499]: src/adapter.c:cancel_passive_scanning() bluetoothd[28499]: src/adapter.c:start_discovery_timeout() bluetoothd[28499]: src/adapter.c:start_discovery_complete() status 0x0a bluetoothd[28499]: Wrong size of start discovery return parameters Reported-by: Jukka Taimisto <jtt@codenomicon.com> Signed-off-by: Szymon Janc <szymon.janc@tieto.com> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
-
Marcel Holtmann authored
Some drivers require knowledge of what connection handle is assigned to what connection link type (ACL or SCO/eSCO). Instead of having each driver implement connection tracking, provide a simple helper function for lookup of the link type. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
-
Marcel Holtmann authored
Some vendors require special handling of the rx data from the USB bulk endpoints. For that case provide an internal callback that can overwrite it with a custom receive function. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
-
Marcel Holtmann authored
The debufs entry for the BR/EDR whitelist is confusing since there is a controller debugfs entry with the name white_list and both are two different things. With the BR/EDR whitelist, the actual interface in use is the device list and thus just include all values from the internal BR/EDR whitelist in the device_list debugfs entry. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
-
Marcel Holtmann authored
The Bluetooth controllers from Broadcom use a strict scanning filter policy that filters based on Bluetooth device addresses and not on RSSI. So tell the core about this. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
-
Marcel Holtmann authored
Some vendors decide to use a strict duplicate filter policy that only filters on Bluetooth device addresses. This means that when the RSSI changes, these devices are not reported again. During discovery it is useful to actually get the RSSI updates. Since this is specific to each controller, add a new quirk setting that allows drivers to tell the core what kind of filtering policy the controller uses. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
-
- 02 Nov, 2014 27 commits
-
-
Alexander Aring authored
This patch fixes commit c7420c36 ("mac802154: move mac_params functions into mac_cmd"). The mac_params functions wasn't deleted by this commit. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Reported-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Alexander Aring authored
Running make C=2 occurs warning: symbol 'mac802154_config_ops' was not declared. Should it be static? This patch adds a missing include in cfg.c to solve this warning. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Reported-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Alexander Aring authored
Running make C=2 occurs in warnings: symbol 'wpan_phy_class' was not declared. Should it be static? symbol 'wpan_phy_sysfs_init' was not declared. Should it be static? symbol 'wpan_phy_sysfs_exit' wasnot declared. Should it be static? This patch adds a missing include "sysfs.h" to solve these warnings. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Reported-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Alexander Aring authored
Running make C=2 occurs these warnings: cast from restricted __be64 incorrect type in argument 1 (different base types) expected unsigned long long[unsigned] [usertype] val got restricted __be64 [usertype]<noident> cast from restricted __be64 cast to restricted __le64 This patch fix these warnings by forcing to __le64 type and using swabp64 instead swab64. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Reported-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Alexander Aring authored
This patch fix byteorder issues which occurs because we compare __le64 with an host byteorder value. Simple add a cpu_to_le64 to convert the host byteorder values to __le64. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Reported-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Alexander Aring authored
Running make C=2 occurs warning: constant 0xffffffffffffffff is so big it is unsigned long This patch fix this warning by adding a ULL to the constant definitions. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Reported-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Marcel Holtmann authored
Instead of having the driver generate the HCI Hardware Error event manually, just call hci_reset_dev() to trigger the upper stack reset. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
-
Marcel Holtmann authored
Some Bluetooth drivers require to reset the upper stack. To avoid having all drivers send HCI Hardware Error events, provide a generic function to wrap the reset functionality. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
-
Marcel Holtmann authored
The current kernel options do not make it clear which modules are for Bluetooth Classic (BR/EDR) and which are for Bluetooth Low Energy (LE). To make it really clear, introduce BT_BREDR and BT_LE options with proper dependencies into the different modules. Both new options default to y to not create a regression with previous kernel config files. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
-
Marcel Holtmann authored
When constructing the event payload for the HCI_Hardware_Error event message, use the HCI_EV_HARDWARE_ERROR define. In addition rename the variables from hard_err to hw_err to clearly indicate that this is about the hardware error and not a hard error. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
-
Marcel Holtmann authored
When the HCI_Hardware_Error event is send by the controller or injected by the driver, then at least print an error message. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
-
Marcel Holtmann authored
When the HCI_Reset command returns, the status needs to be checked. It is unlikely that HCI_Reset actually fails, but when it fails, it is a bad idea to reset all values since the controller will have not reset its values in that case. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
-
Alexander Aring authored
Currently the ieee802154 6lowpan interface operates on wpan interfaces only. Setting the wpan mac address over 6lowpan interface is complex and maybe we can't never do this. This patch removes the set of mac address handling in ieee802154 6lowpan interface for now. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Alexander Aring authored
This patch use the validation function to check if an extended address is valid or not while set the extended address. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Alexander Aring authored
This patch introduce an extended address validation helper to check if an extended address is valid or not. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Alexander Aring authored
All PHY attributes should be directly set to the transceiver after netlink. MAC attributes should be set by interface up. Currently the macparams netlink cmd contains mixed attributes of phy and mac settings. This patch moves all phy settings to the netlink receive function for setting macparams. This is the only way which doesn't change the userspace API and keep the deprecated netlink interface alive. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Alexander Aring authored
This patch moves the setting of hardware panid address filtering inside of interface up instead doing it it directly inside of netlink interface. The netlink call which can only be called when netif isn't running sets only the necessary panid value in sdata. After an interface up the address filter will be set with this value. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Alexander Aring authored
This patch moves the setting of hardware short address filtering inside of interface up instead doing it it directly inside of netlink interface. The netlink call which can only be called when netif isn't running sets only the necessary short_addr value in sdata. After an interface up the address filter will be set with this value. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Alexander Aring authored
This patch moves the setting of hardware extended address filtering inside of interface up instead doing it directly inside of netlink interface. Also we don't need to set the sdata extended attribute in netlink. This is already done by ndo_set_mac_address of net_device_ops. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Alexander Aring authored
This patch adds a helper for converting the dev_addr attribute in netdevice to __le64 type. The dev_addr attribute is a char pointer and contains the extended address in big endian byte order. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Alexander Aring authored
This patch changes the actual behaviour for setting address attributes. We should not change addresses while netif_running is true. Furthermore when netif_running is running the address attributes becomes read only and we can remove locking mechanism in receive and transmit hothpaths of 802.15.4 subsystem. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Alexander Aring authored
This patch removes the wpan_phy callbacks for add and del an interface on a phy. Instead we introduce deprecated cfg802154 callbacks for this. Furthermore we introduce a new netlink interface nl802154 which use different callbacks. The deprecated function is to have a backwards compatibility with the current netlink interface. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Alexander Aring authored
This patch introduce a function to get the cfg802154_registered_device from a wpan_phy. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Alexander Aring authored
This patch introduces mac802154_config_ops struct. Like wireless this struct should be the only one interface between ieee802154 to mac802154 or possible HardMAC drivers. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Alexander Aring authored
This patch introduce the cfg802154_registered_device struct. Like cfg80211_registered_device in wireless this should contain similar functionality for cfg802154. This patch should not change any behaviour. We just adds cfg802154_registered_device as container for wpan_phy struct. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Alexander Aring authored
This patch sets the reset state channels accoridng at86rf2xx datasheets. We don't need to set the default page here which is zero on all chips. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Alexander Aring authored
This patch removes the default channel setting. A channel is always set and there is no default channel setting according 802.15.4. Drivers should set the default channel and page in probing routine. This behaviour is currently a lack of all 802.15.4 drivers. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-