Range is 0-7, not 0-9, otherwise parser silently excludes it from the
strtol() rather than throwing an error.
Reported-by: Marc Boschma <marc@boschma.cx>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Since the remaining bits are not filled in struct bpf_tunnel_key
resp. struct bpf_xfrm_state and originate from uninitialized stack
space, we should make sure to clear them before handing control
back to the program.

Also add a padding element to struct bpf_xfrm_state for future use
similar as we have in struct bpf_tunnel_key and clear it as well.

  struct bpf_xfrm_state {
      __u32                      reqid;            /*     0     4 */
      __u32                      spi;              /*     4     4 */
      __u16                      family;           /*     8     2 */

      /* XXX 2 bytes hole, try to pack */

      union {
          __u32              remote_ipv4;          /*           4 */
          __u32              remote_ipv6[4];       /*          16 */
      };                                           /*    12    16 */

      /* size: 28, cachelines: 1, members: 4 */
      /* sum members: 26, holes: 1, sum holes: 2 */
      /* last cacheline: 28 bytes */
  };
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Add a new bpf_skb_cgroup_id() helper that allows to retrieve the
cgroup id from the skb's socket. This is useful in particular to
enable bpf_get_cgroup_classid()-like behavior for cgroup v1 in
cgroup v2 by allowing ID based matching on egress. This can in
particular be used in combination with applying policy e.g. from
map lookups, and also complements the older bpf_skb_under_cgroup()
interface. In user space the cgroup id for a given path can be
retrieved through the f_handle as demonstrated in [0] recently.

  [0] https://lkml.org/lkml/2018/5/22/1190Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

While some of the BPF map lookup helpers provide a ->map_gen_lookup()
callback for inlining the map lookup altogether it is not available
for every map, so the remaining ones have to call bpf_map_lookup_elem()
helper which does a dispatch to map->ops->map_lookup_elem(). In
times of retpolines, this will control and trap speculative execution
rather than letting it do its work for the indirect call and will
therefore cause a slowdown. Likewise, bpf_map_update_elem() and
bpf_map_delete_elem() do not have an inlined version and need to call
into their map->ops->map_update_elem() resp. map->ops->map_delete_elem()
handlers.

Before:

  # bpftool prog dump xlated id 1
    0: (bf) r2 = r10
    1: (07) r2 += -8
    2: (7a) *(u64 *)(r2 +0) = 0
    3: (18) r1 = map[id:1]
    5: (85) call __htab_map_lookup_elem#232656
    6: (15) if r0 == 0x0 goto pc+4
    7: (71) r1 = *(u8 *)(r0 +35)
    8: (55) if r1 != 0x0 goto pc+1
    9: (72) *(u8 *)(r0 +35) = 1
   10: (07) r0 += 56
   11: (15) if r0 == 0x0 goto pc+4
   12: (bf) r2 = r0
   13: (18) r1 = map[id:1]
   15: (85) call bpf_map_delete_elem#215008  <-- indirect call via
   16: (95) exit                                 helper

After:

  # bpftool prog dump xlated id 1
    0: (bf) r2 = r10
    1: (07) r2 += -8
    2: (7a) *(u64 *)(r2 +0) = 0
    3: (18) r1 = map[id:1]
    5: (85) call __htab_map_lookup_elem#233328
    6: (15) if r0 == 0x0 goto pc+4
    7: (71) r1 = *(u8 *)(r0 +35)
    8: (55) if r1 != 0x0 goto pc+1
    9: (72) *(u8 *)(r0 +35) = 1
   10: (07) r0 += 56
   11: (15) if r0 == 0x0 goto pc+4
   12: (bf) r2 = r0
   13: (18) r1 = map[id:1]
   15: (85) call htab_lru_map_delete_elem#238240  <-- direct call
   16: (95) exit

In all three lookup/update/delete cases however we can use the actual
address of the map callback directly if we find that there's only a
single path with a map pointer leading to the helper call, meaning
when the map pointer has not been poisoned from verifier side.
Example code can be seen above for the delete case.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Its trivial and straight forward to expose it for scripts that can
then use it along with bpftool in order to inspect an individual
application's used maps and progs. Right now we dump some basic
information in the fdinfo file but with the help of the map/prog
id full introspection becomes possible now.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Stating 'proprietary program' in the error is just silly since it
can also be a different open source license than that which is just
not compatible.

Reference: https://twitter.com/majek04/status/998531268039102465Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

We have one triggering on eBPF but lets also add a cBPF example to
make sure we keep tracking them. Also add anther cBPF test running
max number of MSH ops.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Add several test cases where the same or different map pointers
originate from different paths in the program and execute a map
lookup or tail call at a common location.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Martin KaFai Lau says:

====================
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

The t->type in BTF_KIND_FWD is not used.  It must be 0.
This patch ensures that and also adds a test case in test_btf.c
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

This patch ensures array's t->size is 0.

The array size is decided by its individual elem's size and the
number of elements.  Hence, t->size is not used and
it must be 0.

A test case is added to test_btf.c
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Prashant Bhole says:

====================
test_sockmap was originally written only to exercise kernel code
paths, so there was no strict checking of errors. When the code was
modified to run as selftests, due to lack of error handling it was not
able to detect test failures.

In order to improve, this series fixes error handling, test run time
and data verification.

Also slightly improved test output by printing parameter values (cork,
apply, start, end) so that parameters for all tests are displayed.

Changes in v4:
  - patch1: Ignore RX timoute error only for corked tests
  - patch3: Setting different timeout for corked tests and reduce
      run time by reducing number of iterations in some tests

Changes in v3:
  - Skipped error checking for corked tests
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Print values of test options like apply, cork, start, end so that
individual failed tests can be identified for manual run
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

When data verification is enabled, some tests fail because verification is done
incorrectly. Following changes fix it.

- Identify the size of data block to be verified
- Reset verification counter when data block size is reached
- Fixed the value printed in case of verfication failure

Fixes: 16962b24 ("bpf: sockmap, add selftests")
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Currently 10us delay is too low for many tests to succeed. It needs to
be increased. Also, many corked tests are expected to hit rx timeout
irrespective of timeout value.

- This patch sets 1000usec timeout value for corked tests because less
than that causes broken-pipe error in tx thread. Also sets 1 second
timeout for all other tests because less than that results in RX
timeout
- tests with apply=1 and higher number of iterations were taking lot
of time. This patch reduces test run time by reducing iterations.

real    0m12.968s
user    0m0.219s
sys     0m14.337s

Fixes: a18fda1a ("bpf: reduce runtime of test_sockmap tests")
Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

In case of selftest mode, temporary cgroup environment is created but
cgroup is not joined. It causes test failures. Fixed by joining the
cgroup

Fixes: 16962b24 ("bpf: sockmap, add selftests")
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Test failures are not identified because exit code of RX/TX threads
is not checked. Also threads are not returning correct exit code.

- Return exit code from threads depending on test execution status
- In main thread, check the exit code of RX/TX threads
- Skip error checking for corked tests as they are expected to timeout

Fixes: 16962b24 ("bpf: sockmap, add selftests")
Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Update bpf_fib_lookup to return -EAFNOSUPPORT for unsupported address
families. Allows userspace to probe for support as more are added
(e.g., AF_MPLS).
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

The assignment dev = dev is redundant and should be removed.

Detected by CoverityScan, CID#1469486 ("Evaluation order violation")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Add support for recently added BPF_CGROUP_UDP4_SENDMSG and
BPF_CGROUP_UDP6_SENDMSG attach types to bpftool, update documentation
and bash completion.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Sean Young says:

====================
The kernel IR decoders (drivers/media/rc/ir-*-decoder.c) support the most
widely used IR protocols, but there are many protocols which are not
supported[1]. For example, the lirc-remotes[2] repo has over 2700 remotes,
many of which are not supported by rc-core. There is a "long tail" of
unsupported IR protocols, for which lircd is need to decode the IR .

IR encoding is done in such a way that some simple circuit can decode it;
therefore, bpf is ideal.

In order to support all these protocols, here we have bpf based IR decoding.
The idea is that user-space can define a decoder in bpf, attach it to
the rc device through the lirc chardev.

Separate work is underway to extend ir-keytable to have an extensive library
of bpf-based decoders, and a much expanded library of rc keymaps.

Another future application would be to compile IRP[3] to a IR BPF program, and
so support virtually every remote without having to write a decoder for each.
It might also be possible to support non-button devices such as analog
directional pads or air conditioning remote controls and decode the target
temperature in bpf, and pass that to an input device.

[1] http://www.hifi-remote.com/wiki/index.php?title=DecodeIR
[2] https://sourceforge.net/p/lirc-remotes/code/ci/master/tree/remotes/
[3] http://www.hifi-remote.com/wiki/index.php?title=IRP_Notation

Changes since v4:
 - Renamed rc_dev_bpf_{attach,detach,query} to lirc_bpf_{attach,detach,query}
 - Fixed error path in lirc_bpf_query
 - Rebased on bpf-next

Changes since v3:
 - Implemented review comments from Quentin Monnet and Y Song (thanks!)
 - More helpful and better formatted bpf helper documentation
 - Changed back to bpf_prog_array rather than open-coded implementation
 - scancodes can be 64 bit
 - bpf gets passed values in microseconds, not nanoseconds.
   microseconds is more than than enough (IR receivers support carriers upto
   70kHz, at which point a single period is already 14 microseconds). Also,
   this makes it much more consistent with lirc mode2.
 - Since it looks much more like lirc mode2, rename the program type to
   BPF_PROG_TYPE_LIRC_MODE2.
 - Rebased on bpf-next

Changes since v2:
 - Fixed locking issues
 - Improved self-test to cover more cases
 - Rebased on bpf-next again

Changes since v1:
 - Code review comments from Y Song <ys114321@gmail.com> and
   Randy Dunlap <rdunlap@infradead.org>
 - Re-wrote sample bpf to be selftest
 - Renamed RAWIR_DECODER -> RAWIR_EVENT (Kconfig, context, bpf prog type)
 - Rebase on bpf-next
 - Introduced bpf_rawir_event context structure with simpler access checking
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

This is simple test over rc-loopback.
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Add support for BPF_PROG_LIRC_MODE2. This type of BPF program can call
rc_keydown() to reported decoded IR scancodes, or rc_repeat() to report
that the last key should be repeated.

The bpf program can be attached to using the bpf(BPF_PROG_ATTACH) syscall;
the target_fd must be the /dev/lircN device.
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

This makes is it possible for bpf prog detach to return -ENOENT.
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Verify flags argument contains only known flags. Allows programs to probe
for support as more are added.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

MPLS support will not be submitted this dev cycle, but in working on it
I do see a few changes are needed to the API. For now, drop mpls from the
API. Since the fields in question are unions, the mpls fields can be added
back later without affecting the uapi.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

The local variable is only used while CONFIG_IPV6 enabled

net/core/filter.c: In function ‘sk_msg_convert_ctx_access’:
net/core/filter.c:6489:6: warning: unused variable ‘off’ [-Wunused-variable]
  int off;
      ^
This puts it into #ifdef.

Fixes: 303def35 ("bpf: allow sk_msg programs to read sock fields")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

These are minor edits for the eBPF helpers documentation in
include/uapi/linux/bpf.h.

The main fix consists in removing "BPF_FIB_LOOKUP_", because it ends
with a non-escaped underscore that gets interpreted by rst2man and
produces the following message in the resulting manual page:

    DOCUTILS SYSTEM MESSAGES
           System Message: ERROR/3 (/tmp/bpf-helpers.rst:, line 1514)
                  Unknown target name: "bpf_fib_lookup".

Other edits consist in:

- Improving formatting for flag values for "bpf_fib_lookup()" helper.
- Emphasising a parameter name in description of the return value for
  "bpf_get_stack()" helper.
- Removing unnecessary blank lines between "Description" and "Return"
  sections for the few helpers that would use it, for consistency.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Andrey Ignatov says:

====================
v3 -> v4:
* handle static key correctly for CONFIG_CGROUP_BPF=n.

v2 -> v3:
* place BPF logic under static key in udp_sendmsg, udpv6_sendmsg;
* rebase.

v1 -> v2:
* return ENOTSUPP if bpf_prog rewrote IPv6-only with IPv4-mapped IPv6;
* add test for IPv4-mapped IPv6 use-case;
* fix build for CONFIG_CGROUP_BPF=n;
* rebase.

This path set adds BPF hooks for sys_sendmsg similar to existing hooks for
sys_bind and sys_connect.

Hooks allow to override source IP (including the case when it's set via
cmsg(3)) and destination IP:port for unconnected UDP (slow path). TCP and
connected UDP (fast path) are not affected. This makes UDP support
complete: connected UDP is handled by sys_connect hooks, unconnected by
sys_sendmsg ones.

Similar to sys_connect hooks, sys_sendmsg ones can be used to make system
calls such as sendmsg(2) and sendto(2) return EPERM.

Please see patch 0002 for more details.
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Add selftest for BPF_CGROUP_UDP4_SENDMSG and BPF_CGROUP_UDP6_SENDMSG
attach types.

Try to sendmsg(2) to specific IP:port and test that:
* source IP is overridden as expected.
* remote IP:port pair is overridden as expected;

Both UDPv4 and UDPv6 are tested.

Output:
  # test_sock_addr.sh 2>/dev/null
  Wait for testing IPv4/IPv6 to become available ... OK
  ... pre-existing test-cases skipped ...
  Test case: sendmsg4: load prog with wrong expected attach type .. [PASS]
  Test case: sendmsg4: attach prog with wrong attach type .. [PASS]
  Test case: sendmsg4: rewrite IP & port (asm) .. [PASS]
  Test case: sendmsg4: rewrite IP & port (C) .. [PASS]
  Test case: sendmsg4: deny call .. [PASS]
  Test case: sendmsg6: load prog with wrong expected attach type .. [PASS]
  Test case: sendmsg6: attach prog with wrong attach type .. [PASS]
  Test case: sendmsg6: rewrite IP & port (asm) .. [PASS]
  Test case: sendmsg6: rewrite IP & port (C) .. [PASS]
  Test case: sendmsg6: IPv4-mapped IPv6 .. [PASS]
  Test case: sendmsg6: deny call .. [PASS]
  Summary: 27 PASSED, 0 FAILED
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

test_sock_addr was not easy to extend since it was focused on sys_bind
and sys_connect quite a bit.

Reorganized it so that it'll be easier to cover new test-cases for
`BPF_PROG_TYPE_CGROUP_SOCK_ADDR`:

- decouple test-cases so that only one BPF prog is tested at a time;

- check programmatically that local IP:port for sys_bind, source IP and
  destination IP:port for sys_connect are rewritten property by tested
  BPF programs.

The output of new version:
  # test_sock_addr.sh 2>/dev/null
  Wait for testing IPv4/IPv6 to become available ... OK
  Test case: bind4: load prog with wrong expected attach type .. [PASS]
  Test case: bind4: attach prog with wrong attach type .. [PASS]
  Test case: bind4: rewrite IP & TCP port in .. [PASS]
  Test case: bind4: rewrite IP & UDP port in .. [PASS]
  Test case: bind6: load prog with wrong expected attach type .. [PASS]
  Test case: bind6: attach prog with wrong attach type .. [PASS]
  Test case: bind6: rewrite IP & TCP port in .. [PASS]
  Test case: bind6: rewrite IP & UDP port in .. [PASS]
  Test case: connect4: load prog with wrong expected attach type .. [PASS]
  Test case: connect4: attach prog with wrong attach type .. [PASS]
  Test case: connect4: rewrite IP & TCP port .. [PASS]
  Test case: connect4: rewrite IP & UDP port .. [PASS]
  Test case: connect6: load prog with wrong expected attach type .. [PASS]
  Test case: connect6: attach prog with wrong attach type .. [PASS]
  Test case: connect6: rewrite IP & TCP port .. [PASS]
  Test case: connect6: rewrite IP & UDP port .. [PASS]
  Summary: 16 PASSED, 0 FAILED

(stderr contains errors from libbpf when testing load/attach with
invalid arguments)
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

libbpf can guess prog type and expected attach type based on section
name. Add hints for "cgroup/sendmsg4" and "cgroup/sendmsg6" section
names.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Sync new `BPF_CGROUP_UDP4_SENDMSG` and `BPF_CGROUP_UDP6_SENDMSG`
attach types to tools/.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

In addition to already existing BPF hooks for sys_bind and sys_connect,
the patch provides new hooks for sys_sendmsg.

It leverages existing BPF program type `BPF_PROG_TYPE_CGROUP_SOCK_ADDR`
that provides access to socket itlself (properties like family, type,
protocol) and user-passed `struct sockaddr *` so that BPF program can
override destination IP and port for system calls such as sendto(2) or
sendmsg(2) and/or assign source IP to the socket.

The hooks are implemented as two new attach types:
`BPF_CGROUP_UDP4_SENDMSG` and `BPF_CGROUP_UDP6_SENDMSG` for UDPv4 and
UDPv6 correspondingly.

UDPv4 and UDPv6 separate attach types for same reason as sys_bind and
sys_connect hooks, i.e. to prevent reading from / writing to e.g.
user_ip6 fields when user passes sockaddr_in since it'd be out-of-bound.

The difference with already existing hooks is sys_sendmsg are
implemented only for unconnected UDP.

For TCP it doesn't make sense to change user-provided `struct sockaddr *`
at sendto(2)/sendmsg(2) time since socket either was already connected
and has source/destination set or wasn't connected and call to
sendto(2)/sendmsg(2) would lead to ENOTCONN anyway.

Connected UDP is already handled by sys_connect hooks that can override
source/destination at connect time and use fast-path later, i.e. these
hooks don't affect UDP fast-path.

Rewriting source IP is implemented differently than that in sys_connect
hooks. When sys_sendmsg is used with unconnected UDP it doesn't work to
just bind socket to desired local IP address since source IP can be set
on per-packet basis by using ancillary data (cmsg(3)). So no matter if
socket is bound or not, source IP has to be rewritten on every call to
sys_sendmsg.

To do so two new fields are added to UAPI `struct bpf_sock_addr`;
* `msg_src_ip4` to set source IPv4 for UDPv4;
* `msg_src_ip6` to set source IPv6 for UDPv6.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Static key is used to enable/disable cgroup-bpf related code paths at
run time.

Though it's not defined when cgroup-bpf is disabled at compile time,
i.e. CONFIG_CGROUP_BPF=n, and if some code wants to use it, it has to do
this:

	#ifdef CONFIG_CGROUP_BPF
		if (cgroup_bpf_enabled) {
			/* ... some work ... */
		}
	#endif

This code can be simplified by setting cgroup_bpf_enabled to 0 for
CONFIG_CGROUP_BPF=n case:

	if (cgroup_bpf_enabled) {
		/* ... some work ... */
	}

And it aligns well with existing BPF_CGROUP_RUN_PROG_* macros that
defined for both states of CONFIG_CGROUP_BPF.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Previous patch "selftests/bpf: test for seg6local End.BPF action" lacks
some UAPI headers in tools/.

clang -I. -I./include/uapi -I../../../include/uapi -idirafter
/usr/local/include -idirafter
/data/users/yhs/work/llvm/build/install/lib/clang/7.0.0/include
-idirafter /usr/include -Wno-compare-distinct-pointer-types \
         -O2 -target bpf -emit-llvm -c test_lwt_seg6local.c -o - |      \
llc -march=bpf -mcpu=generic  -filetype=obj -o
[...]/net-next/tools/testing/selftests/bpf/test_lwt_seg6local.o
test_lwt_seg6local.c:4:10: fatal error: 'linux/seg6_local.h' file not found
         ^~~~~~~~~~~~~~~~~~~~
1 error generated.
make: Leaving directory
`/data/users/yhs/work/net-next/tools/testing/selftests/bpf'

v2: moving the headers to tools/include/uapi/.
Reported-by: Y Song <ys114321@gmail.com>
Signed-off-by: Mathieu Xhonneux <m.xhonneux@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

The stack_map_get_build_id_offset() function is too long for gcc to track
whether 'work' may or may not be initialized at the end of it, leading
to a false-positive warning:

kernel/bpf/stackmap.c: In function 'stack_map_get_build_id_offset':
kernel/bpf/stackmap.c:334:13: error: 'work' may be used uninitialized in this function [-Werror=maybe-uninitialized]

This removes the 'in_nmi_ctx' flag and uses the state of that variable
itself to see if it got initialized.

Fixes: bae77c5e ("bpf: enable stackmap with build_id in nmi context")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

gcc warns about a noreturn function possibly returning in
some configurations:

kernel/bpf/btf.c: In function 'env_type_is_resolve_sink':
kernel/bpf/btf.c:729:1: error: control reaches end of non-void function [-Werror=return-type]

Using BUG() instead of BUG_ON() avoids that warning and otherwise
does the exact same thing.

Fixes: eb3f595d ("bpf: btf: Validate type reference")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

install_headers target should contain all headers that are part of
libbpf. Add missing btf.h
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Lots of easy overlapping changes in the confict
resolutions here.
Signed-off-by: David S. Miller <davem@davemloft.net>