- 18 Dec, 2015 40 commits
-
-
H Hartley Sweeten authored
Remove the unnecessary comments and rename the 'rangelist_ai' member for aesthetics. Signed-off-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by:
Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
The pci1711/31 boards are the only ones that have a smaller FIFO (1K vs 4K) and single-ended analog inputs (no differential). Replace the 'has_large_fifo' and 'has_diff_ai' members of the boardinfo with 'is_pci1711' and use that to determine how to initialize the analog input subdev_flags as well as the private data 'max_samples'. Signed-off-by:
-
H Hartley Sweeten authored
This member of the boardinfo isn't really necessary. All the boards except the pci1713 have 16 digital inputs and 16 digital outputs. There is already a 'is_pci1713' member in the boardinfo so that can be used to determine the subdevices for the digital inputs and outputs need to be allocated and initialized. Signed-off-by:
-
H Hartley Sweeten authored
This member of the boardinfo isn't really necessary. All the boards have analog inputs, the pci1713 has 32 channels the rest have 16 channels. There is already a 'is_pci1713' member in the boardinfo so that can be used to determine the number of channels for the analog input subdevice. Signed-off-by:
-
H Hartley Sweeten authored
For aesthetics, define some macros to set the bits in the mux control register. Also, rename the 'mux_ext' member of the private data. Signed-off-by:
-
H Hartley Sweeten authored
The gain codes used to program the analog output range are currently stored in const char arrays. The values look a bit "magic" and it's not clear how they associate with the comedi_lrange without looking through user manuals. Refactor the ai range programming to clarify the driver and remove the magic numbers. Also, refine the bits in the range register that set the differential and unipolar modes. Signed-off-by:
-
H Hartley Sweeten authored
Currently this driver calls pci1710_reset() during the (*detach) of the driver. That function does the following: 1) program the control register to stop any operations 2) clears the analog input FIFO 3) clears any pending interrupts 4) sets all the analog output channels to unipolar 5V range and 0V output 5) sets all the digital outputs to 0V Before detaching the comedi core will (*cancel) any running async commands. This will handle 1-3 above. Depending on the application, it might not be safe to reset the analog and digital outputs when the driver is detached. Remove the board reset when detaching and just use comedi_pci_detach() directly for the driver (*detach). Signed-off-by:
-
H Hartley Sweeten authored
All the boards supported by this driver have a 8254 counter. Channels 1 and 2 are used to create the cascaded 32-bit analog input pacer. Counter 0 is available for the user on all the boards except the PCI-1713. Remove the 'has_counter' boardinfo and use the 'is_pci1713' boardinfo to determine if the user counter subdevice needs to be allocated and initialized. Signed-off-by:
-
H Hartley Sweeten authored
All the boards supported by this driver can use an interrupt. Remove the unnecessary boardinfo. Signed-off-by:
-
H Hartley Sweeten authored
The PCI-1760 is board unique. It uses an outgoing/incoming mailbox programming sequence to access the hardware. The other boards supported by this driver use simple register mapping. Including support for the PCI-1760 in this driver just makes it harder to understand. Separate out the PCI-1760 support into a new driver, adv_pci1760. Clean up the new driver. The original code had a bunch of CamelCase and other checkpatch.pl issues. The code used to access the outgoing/incoming mailboxes was also a bit awkward with the passing of the arrays for the outgoing and incoming mailbox bytes. Replace them with two new functions that send a command and return the feedback data from the command based on the programming flow chart in the datasheet for the PCI-1760. The new adv_pci1760 driver also fixes the incomplete timer subdevice. This subdevice is actually the 2 PWM outputs so the subdevice type has been changed to COMEDI_SUBD_PWM. The counter subdevice support was not complete in the original code. They are also a bit strange since they are up counters connected to each of the digital inputs. For now that subdevice has been disabled (COMEDI_SUBD_UNUSED). Signed-off-by:
-
Mario J. Rugiero authored
This silences a sparse warning about incompatible comparisons, while making the intent of the check a bit clearer. Signed-off-by:
Mario J. Rugiero <mrugiero@gmail.com> Signed-off-by:
-
Masanari Iida authored
This patch fix some spelling typo in wilc_msgqueue.h Signed-off-by:
Masanari Iida <standby24x7@gmail.com> Acked-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
-
Bogicevic Sasa authored
This fixes all "comparison to NULL could be written like ..." Signed-off-by:
Bogicevic Sasa <brutallesale@gmail.com> Signed-off-by:
-
Chandra S Gorentla authored
- 'if' which is always false is removed - variable associated with this 'if' is deleted Signed-off-by:
Chandra S Gorentla <csgorentla@gmail.com> Signed-off-by:
-
Glen Lee authored
kernel crashes when load and unload driver several times. I used git bisect to track down and found that removing NULL setting caused the panic. This reverts only related codes of the patch(a4ab1ade). Fixes: a4ab1ade ("staging: wilc1000: replace drvHandler and hWFIDrv with hif_drv") Signed-off-by:
Glen Lee <glen.lee@atmel.com> Signed-off-by:
-
Leo Kim authored
This patch fixes the warning reported by smatch. - Handle_SetMulticastFilter() warn: right shifting more than type allows That is unnecessary action of boolean type. just assign 0. Signed-off-by:
Leo Kim <leo.kim@atmel.com> Signed-off-by:
-
Leo Kim authored
The if statement should be else if since it is part of whole if condition. Signed-off-by:
-
Leo Kim authored
This patch removes unused a function Handle_AddBASession. And, removes the relation define. Signed-off-by:
-
Leo Kim authored
This patch fixes the checks reported by checkpatch.pl for Blank lines aren't necessary after an open brace '{' and Blank lines aren't necessary before a close brace '}'. Signed-off-by: -
Leo Kim authored
There are over-commenting in the wilc_wfi_cfgoperations.c file and most of them are not helpful to explain what the code does and generate 80 ending line over warnings. So, all of comments are removed in this patch and the comments will later be added if necessary with the preferred Linux style. Signed-off-by:
-
Glen Lee authored
This patch fixes rmmod failure. wilc->firmware needs to be set to NULL because it is used again to check firmware is released when module exit. Fixes: 8b8ad7bc ("staging: wilc1000: rename wilc_firmware in the struct wilc") Signed-off-by:
-
Glen Lee authored
Return proper linux error value -ETIMEDOUT instead of -1. Signed-off-by:
-
Glen Lee authored
wilc_sdio_func is not used anymore so just delete it. Signed-off-by:
-
Leo Kim authored
This patch renames pstrNetworkInfo to network_info that is first argument of get_rssi_avg function to avoid camelcase. Signed-off-by:
-
Leo Kim authored
This patch renames pJoinParams to join_params that is fourth argument of CfgScanResult function to avoid camelcase. Signed-off-by:
-
Leo Kim authored
This patch renames pUserVoid to user_void that is third argument of CfgScanResult function to avoid camelcase. Signed-off-by:
-
Leo Kim authored
This patch renames pstrNetworkInfo to network_info that is second argument of CfgScanResult function to avoid camelcase. And, remove the relation comment. Signed-off-by:
-
Leo Kim authored
This patch renames enuScanEvent to scan_event that is first argument of CfgScanResult function to avoid camelcase. And, remove the relation comment. Signed-off-by:
-
Leo Kim authored
This patch renames pUserVoid to user_void that is second argument of add_network_to_shadow function to avoid camelcase. Signed-off-by:
-
Leo Kim authored
This patch renames pUserVoid to user_void that is second argument of is_network_in_shadow function to avoid camelcase. Signed-off-by:
-
Leo Kim authored
This patch removes pUserVoid that is first argument of update_scan_time function because it is not used in this function. Remove argument in the function call also. Signed-off-by:
-
Leo Kim authored
This patch removes pUserVoid that is first argument of reset_shadow_found function because it is not used in this function. Remove argument in the function call also. Signed-off-by:
-
Leo Kim authored
This patch renames s32Freq variable to freq to avoid camelcase. Signed-off-by:
-
Leo Kim authored
This patch renames pstrNetworkInfo variable to network_info to avoid camelcase. Signed-off-by:
-
Leo Kim authored
This patch renames bDirectScan to direct_scan that is third argument of refresh_scan function to avoid camelcase. Signed-off-by:
-
Leo Kim authored
This patch renames pUserVoid to user_void that is first argument of refresh_scan function to avoid camelcase. Signed-off-by:
-
Leo Kim authored
This patch removes pUserVoid that is first argument of clear_shadow_scan function because it is not used in this function. Remove argument in the function call also. Signed-off-by:
-
Leo Kim authored
This patch renames wilc_connected_SSID variable to wilc_connected_ssid to avoid camelcase. Signed-off-by:
-
Leo Kim authored
This patch renames duringIP_TIME variable to during_ip_time to avoid camelcase. Signed-off-by:
-
Leo Kim authored
This patch renames bWilc_ie variable to wilc_ie to avoid camelcase. Signed-off-by:
-
