- 08 Feb, 2017 7 commits
-
-
Tomi Valkeinen authored
SSD1306 needs VBAT when it is wired in charge pump configuration. This patch adds support to the driver to enable VBAT regulator at init time. Cc: Rob Herring <robh+dt@kernel.org> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Benoît Cousson <bcousson@baylibre.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Jyri Sarha <jsarha@ti.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
-
Jyri Sarha authored
Make reset gpio devicetree property optional. Depending on the board designing there may not be a dedicated gpio for resetting the display. Without a proper reset there may be some junk in the display memory at probe time, so in such a case the display memory is cleared before turning it on. The devicetree binding document is also updated. Cc: Rob Herring <robh+dt@kernel.org> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Benoît Cousson <bcousson@baylibre.com> Signed-off-by: Jyri Sarha <jsarha@ti.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
-
Jyri Sarha authored
Remove reset-active-low from the devicetree binding document. The actual implementation has never been there in the driver code and there is no reason to add it because the gpiod API supports gpio flags, including GPIO_ACTIVE_LOW, directly trough its own devicetree binding. Cc: Rob Herring <robh+dt@kernel.org> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Benoît Cousson <bcousson@baylibre.com> Signed-off-by: Jyri Sarha <jsarha@ti.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
-
Jyri Sarha authored
Start to use gpiod API for reset gpio. Cc: Rob Herring <robh+dt@kernel.org> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Benoît Cousson <bcousson@baylibre.com> Signed-off-by: Jyri Sarha <jsarha@ti.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
-
Wei Yongjun authored
Fix to return error code -ENOMEM from the ioremap_nocache() error handling case instead of 0, as done elsewhere in this function. Cc: Kees Cook <keescook@chromium.org> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
-
Dmitry Torokhov authored
Instead of open-coding loops let's switch to a nice macro. Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Yongji Xie <xyjxie@linux.vnet.ibm.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
-
Jan Stourac authored
Use setup_timer and mod_timer functions instead of initializing timer with the function init_timer and data fields. Signed-off-by: Jan Stourac <xstourac@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
-
- 30 Jan, 2017 10 commits
-
-
Lars-Peter Clausen authored
Most OMAP FB LCD drivers don't have anything to do in their panel callbacks. This leads to a large set of empty boilerplate functions in the panel drivers. Make those callbacks optional by checking if they are set before calling them. This allows those boilerplate functions to be removed. Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
-
Lars-Peter Clausen authored
None of the lcd_panel structs defined by the OMAP LCD drivers are referenced outside of their compilation unit. Follow best practices and mark them as static. Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
-
Lars-Peter Clausen authored
Every single one of the OMAP fbdev LCD drivers implements no-op remove, suspend and resume callbacks for their platform_driver. This is not necessary as the driver core handles the case where the callbacks are not set just fine. So they are just unnecessary boilerplate that can be removed. Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
-
Geliang Tang authored
Drop open_file_generic(), use simple_open() instead of it. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
-
Arvind Yadav authored
Add missing error check for ioremap_nocache() failure (prevents NULL pointer dereference on error). Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Helge Deller <deller@gmx.de> Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> [b.zolnierkie: minor fixes] Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
-
Maciej W. Rozycki authored
Fix: WARNING: drivers/video/fbdev/pmagb-b-fb.o(.text+0x6dc): Section mismatch in reference from the function pmagbbfb_probe() to the function .init.text:pmagbbfb_erase_cursor() The function pmagbbfb_probe() references the function __init pmagbbfb_erase_cursor(). This is often because pmagbbfb_probe lacks a __init annotation or the annotation of pmagbbfb_erase_cursor is wrong. -- a fallout from a missed update from commit 5b1638d9 ("VIDEO: PMAGB-B: Fix section mismatch") and then commit 48c68c4f ("Drivers: video: remove __dev* attributes.") Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
-
Maciej W. Rozycki authored
Fix: WARNING: drivers/video/fbdev/pmag-ba-fb.o(.text+0x308): Section mismatch in reference from the function pmagbafb_probe() to the function .init.text:pmagbafb_erase_cursor() The function pmagbafb_probe() references the function __init pmagbafb_erase_cursor(). This is often because pmagbafb_probe lacks a __init annotation or the annotation of pmagbafb_erase_cursor is wrong. -- a fallout from a missed update from commit 9625b513 ("VIDEO: PMAG-BA: Fix section mismatch") and then commit 48c68c4f ("Drivers: video: remove __dev* attributes.") Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
-
Vladimir Zapolskiy authored
Having obtained panel device node in clcdfb_of_init_display() it allows to generalize and simplify two more helper functions clcdfb_of_get_backlight() and clcdfb_of_get_mode(). Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
-
Vladimir Zapolskiy authored
There is no necessity to pass an endpoint device node to custom panel initialization functions, because a child panel device node should be sufficient, note that the existing init_panel() callback declaration from linux/amba/clcd.h already prompts to use the panel device node here. Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
-
Vladimir Zapolskiy authored
To simplify the task of looking through the list of included headers sort them out alphabetically, some of the truly redundant headers are removed from the list. Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
-
- 11 Jan, 2017 8 commits
-
-
Julia Lawall authored
Use DEVICE_ATTR_RW for read-write attributes. This simplifies the source code, improves readbility, and reduces the chance of inconsistencies. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @rw@ declarer name DEVICE_ATTR; identifier x,x_show,x_store; @@ DEVICE_ATTR(x, \(0644\|S_IRUGO|S_IWUSR\), x_show, x_store); @script:ocaml@ x << rw.x; x_show << rw.x_show; x_store << rw.x_store; @@ if not (x^"_show" = x_show && x^"_store" = x_store) then Coccilib.include_match false @@ declarer name DEVICE_ATTR_RW; identifier rw.x,rw.x_show,rw.x_store; @@ - DEVICE_ATTR(x, \(0644\|S_IRUGO|S_IWUSR\), x_show, x_store); + DEVICE_ATTR_RW(x); // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
-
Hans de Goede authored
Currently when a simplefb needs both clocks and regulators and one of the regulators returns -EPROBE_DEFER when we try to get it, we end up disabling the clocks. This causes the screen to go blank; and in some cases my cause hardware state to be lost resulting in the framebuffer not working at all. This commit splits the get and enable steps and only enables clocks and regulators after successfully getting all of them, fixing the disabling of the clocks which were left enabled by the firmware setting up the simplefb. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
-
Takashi Iwai authored
fbcon can deal with vc_hi_font_mask (the upper 256 chars) and adjust the vc attrs dynamically when vc_hi_font_mask is changed at fbcon_init(). When the vc_hi_font_mask is set, it remaps the attrs in the existing console buffer with one bit shift up (for 9 bits), while it remaps with one bit shift down (for 8 bits) when the value is cleared. It works fine as long as the font gets updated after fbcon was initialized. However, we hit a bizarre problem when the console is switched to another fb driver (typically from vesafb or efifb to drmfb). At switching to the new fb driver, we temporarily rebind the console to the dummy console, then rebind to the new driver. During the switching, we leave the modified attrs as is. Thus, the new fbcon takes over the old buffer as if it were to contain 8 bits chars (although the attrs are still shifted for 9 bits), and effectively this results in the yellow color texts instead of the original white color, as found in the bugzilla entry below. An easy fix for this is to re-adjust the attrs before leaving the fbcon at con_deinit callback. Since the code to adjust the attrs is already present in the current fbcon code, in this patch, we simply factor out the relevant code, and call it from fbcon_deinit(). Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1000619Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
-
Martin Kaiser authored
The current code calculates the number of color map entries as 1 << info->var.bits_per_pixel. For 32bpp modes, 1 << 32 is 0 when written to an int variable. As a consequence, the subsequent copying of the default (non-empty) color map into our newly allocated color map fails and imxfb's probe function returns an error. On both imx1 and imx21 platforms, the color map is used only for modes with <= 8bpp. By allocating 256 entries for the color map, we're on the safe side. Signed-off-by: Martin Kaiser <martin@kaiser.cx> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
-
Bhumika Goyal authored
The object maxinefb_fix of type fb_fix_screeninfo is never referenced after initialization by maxinefb_init. In the init function, the object and one of its fields is only stored into another variable. So, the object and its fields are never referenced anywhere after initialization and therefore add __initdata to its declaration. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
-
Kees Cook authored
Prepare to mark sensitive kernel structures for randomization by making sure they're using designated initializers. These were identified during allyesconfig builds of x86, arm, and arm64, with most initializer fixes extracted from grsecurity. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
-
Kees Cook authored
Prepare to mark sensitive kernel structures for randomization by making sure they're using designated initializers. These were identified during allyesconfig builds of x86, arm, and arm64, with most initializer fixes extracted from grsecurity. Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
-
Martin Kaiser authored
The current definitions of DMACR_HM() and DMACR_TM() are correct only for imx1, they're wrong for imx21. The macros are meant for legacy board files only, they're not applicable for boards using device tree. At the moment, there are no boards using these macros. So it should be safe to drop them rather than making them work for both imx1 and imx21, which would require a change in the platform data struct. Signed-off-by: Martin Kaiser <martin@kaiser.cx> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
-
- 05 Jan, 2017 1 commit
-
-
git://github.com/bzolnier/linuxBartlomiej Zolnierkiewicz authored
fbdev fixes for v4.10-rc2: - bring fbdev subsystem back into Maintained mode - add missing devm_ioremap() error checking to cobalt_lcdfb driver
-
- 04 Jan, 2017 2 commits
-
-
Arvind Yadav authored
Here, If devm_ioremap will fail. It will return NULL. Kernel can run into a NULL-pointer dereference. This error check will avoid NULL pointer dereference. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Acked-by: Yoichi Yuasa <yuasa@linux-mips.org> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
-
Bartlomiej Zolnierkiewicz authored
I would like to help with fbdev maintenance. I can dedicate some time for reviewing and handling patches but won't have time for much more. The subsystem will remain in maintenance mode (no new drivers will be added to it). Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
-
- 01 Jan, 2017 2 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimmLinus Torvalds authored
Pull DAX updates from Dan Williams: "The completion of Jan's DAX work for 4.10. As I mentioned in the libnvdimm-for-4.10 pull request, these are some final fixes for the DAX dirty-cacheline-tracking invalidation work that was merged through the -mm, ext4, and xfs trees in -rc1. These patches were prepared prior to the merge window, but we waited for 4.10-rc1 to have a stable merge base after all the prerequisites were merged. Quoting Jan on the overall changes in these patches: "So I'd like all these 6 patches to go for rc2. The first three patches fix invalidation of exceptional DAX entries (a bug which is there for a long time) - without these patches data loss can occur on power failure even though user called fsync(2). The other three patches change locking of DAX faults so that ->iomap_begin() is called in a more relaxed locking context and we are safe to start a transaction there for ext4" These have received a build success notification from the kbuild robot, and pass the latest libnvdimm unit tests. There have not been any -next releases since -rc1, so they have not appeared there" * 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: ext4: Simplify DAX fault path dax: Call ->iomap_begin without entry lock during dax fault dax: Finish fault completely when loading holes dax: Avoid page invalidation races and unnecessary radix tree traversals mm: Invalidate DAX radix tree entries only if appropriate ext2: Return BH_New buffers for zeroed blocks
-
- 30 Dec, 2016 2 commits
-
-
git://git.lwn.net/linuxLinus Torvalds authored
Pull documentation fixes from Jonathan Corbet: "Two small fixes: - A merge error on my part broke the DocBook build. I've requisitioned one of tglx's frozen sharks for appropriate disciplinary action and resolved to be more careful about testing the DocBook stuff as long as it's still around. - Fix an error in unaligned-memory-access.txt" * tag 'docs-4.10-rc1-fix' of git://git.lwn.net/linux: Documentation/unaligned-memory-access.txt: fix incorrect comparison operator docs: Fix build failure
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
Pull crypto fix from Herbert Xu: "This fixes a boot failure on some platforms when crypto self test is enabled along with the new acomp interface" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: testmgr - Use heap buffer for acomp test input
-
- 29 Dec, 2016 2 commits
-
-
Olof Johansson authored
mm/filemap.c: In function 'clear_bit_unlock_is_negative_byte': mm/filemap.c:933:9: error: too few arguments to function 'test_bit' return test_bit(PG_waiters); ^~~~~~~~ Fixes: b91e1302 ('mm: optimize PageWaiters bit use for unlock_page()') Signed-off-by: Olof Johansson <olof@lixom.net> Brown-paper-bag-by: Linus Torvalds <dummy@duh.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
In commit 62906027 ("mm: add PageWaiters indicating tasks are waiting for a page bit") Nick Piggin made our page locking no longer unconditionally touch the hashed page waitqueue, which not only helps performance in general, but is particularly helpful on NUMA machines where the hashed wait queues can bounce around a lot. However, the "clear lock bit atomically and then test the waiters bit" sequence turns out to be much more expensive than it needs to be, because you get a nasty stall when trying to access the same word that just got updated atomically. On architectures where locking is done with LL/SC, this would be trivial to fix with a new primitive that clears one bit and tests another atomically, but that ends up not working on x86, where the only atomic operations that return the result end up being cmpxchg and xadd. The atomic bit operations return the old value of the same bit we changed, not the value of an unrelated bit. On x86, we could put the lock bit in the high bit of the byte, and use "xadd" with that bit (where the overflow ends up not touching other bits), and look at the other bits of the result. However, an even simpler model is to just use a regular atomic "and" to clear the lock bit, and then the sign bit in eflags will indicate the resulting state of the unrelated bit #7. So by moving the PageWaiters bit up to bit #7, we can atomically clear the lock bit and test the waiters bit on x86 too. And architectures with LL/SC (which is all the usual RISC suspects), the particular bit doesn't matter, so they are fine with this approach too. This avoids the extra access to the same atomic word, and thus avoids the costly stall at page unlock time. The only downside is that the interface ends up being a bit odd and specialized: clear a bit in a byte, and test the sign bit. Nick doesn't love the resulting name of the new primitive, but I'd rather make the name be descriptive and very clear about the limitation imposed by trying to work across all relevant architectures than make it be some generic thing that doesn't make the odd semantics explicit. So this introduces the new architecture primitive clear_bit_unlock_is_negative_byte(); and adds the trivial implementation for x86. We have a generic non-optimized fallback (that just does a "clear_bit()"+"test_bit(7)" combination) which can be overridden by any architecture that can do better. According to Nick, Power has the same hickup x86 has, for example, but some other architectures may not even care. All these optimizations mean that my page locking stress-test (which is just executing a lot of small short-lived shell scripts: "make test" in the git source tree) no longer makes our page locking look horribly bad. Before all these optimizations, just the unlock_page() costs were just over 3% of all CPU overhead on "make test". After this, it's down to 0.66%, so just a quarter of the cost it used to be. (The difference on NUMA is bigger, but there this micro-optimization is likely less noticeable, since the big issue on NUMA was not the accesses to 'struct page', but the waitqueue accesses that were already removed by Nick's earlier commit). Acked-by: Nick Piggin <npiggin@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Bob Peterson <rpeterso@redhat.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Andrew Lutomirski <luto@kernel.org> Cc: Andreas Gruenbacher <agruenba@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 28 Dec, 2016 2 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
Pull crypto fix from Herbert Xu: "This fixes a hash corruption bug in the marvell driver" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: marvell - Copy IVDIG before launching partial DMA ahash requests
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Various ipvlan fixes from Eric Dumazet and Mahesh Bandewar. The most important is to not assume the packet is RX just because the destination address matches that of the device. Such an assumption causes problems when an interface is put into loopback mode. 2) If we retry when creating a new tc entry (because we dropped the RTNL mutex in order to load a module, for example) we end up with -EAGAIN and then loop trying to replay the request. But we didn't reset some state when looping back to the top like this, and if another thread meanwhile inserted the same tc entry we were trying to, we re-link it creating an enless loop in the tc chain. Fix from Daniel Borkmann. 3) There are two different WRITE bits in the MDIO address register for the stmmac chip, depending upon the chip variant. Due to a bug we could set them both, fix from Hock Leong Kweh. 4) Fix mlx4 bug in XDP_TX handling, from Tariq Toukan. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: net: stmmac: fix incorrect bit set in gmac4 mdio addr register r8169: add support for RTL8168 series add-on card. net: xdp: remove unused bfp_warn_invalid_xdp_buffer() openvswitch: upcall: Fix vlan handling. ipv4: Namespaceify tcp_tw_reuse knob net: korina: Fix NAPI versus resources freeing net, sched: fix soft lockup in tc_classify net/mlx4_en: Fix user prio field in XDP forward tipc: don't send FIN message from connectionless socket ipvlan: fix multicast processing ipvlan: fix various issues in ipvlan_process_multicast()
-
- 27 Dec, 2016 4 commits
-
-
Cihangir Akturk authored
In the actual implementation ether_addr_equal function tests for equality to 0 when returning. It seems in commit 0d74c4 it is somehow overlooked to change this operator to reflect the actual function. Signed-off-by: Cihangir Akturk <cakturk@gmail.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
-
John Brooks authored
The 80211.tmpl DocBook file was removed in commit 819bf593 ("docs-rst: sphinxify 802.11 documentation"), but the 80211.xml target was re-added to the Makefile by commit 7ddedebb ("ALSA: doc: ReSTize writing-an-alsa-driver document"), leading to a failure when building the documentation: *** No rule to make target 'Documentation/DocBook/80211.xml', needed by 'Documentation/DocBook/80211.aux.xml'. cc: stable@vger.kernel.org Signed-off-by: John Brooks <john@fastquake.com> Mea-culpa-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
-
Jonathan Corbet authored
Linux 4.10-rc1
-
Kweh, Hock Leong authored
Fixing the gmac4 mdio write access to use MII_GMAC4_WRITE only instead of OR together with MII_WRITE. Signed-off-by: Kweh, Hock Leong <hock.leong.kweh@intel.com> Acked-By: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-