seg6_do_srh_encap and seg6_do_srh_inline can possibly do an
out-of-bounds access when adding the SRH to the packet. This no longer
happen when expanding the skb not only by the size of the SRH (+
outer IPv6 header), but also by skb->mac_len.

[   53.793056] BUG: KASAN: use-after-free in seg6_do_srh_encap+0x284/0x620
[   53.794564] Write of size 14 at addr ffff88011975ecfa by task ping/674

[   53.796665] CPU: 0 PID: 674 Comm: ping Not tainted 4.17.0-rc3-ARCH+ #90
[   53.796670] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS 1.11.0-20171110_100015-anatol 04/01/2014
[   53.796673] Call Trace:
[   53.796679]  <IRQ>
[   53.796689]  dump_stack+0x71/0xab
[   53.796700]  print_address_description+0x6a/0x270
[   53.796707]  kasan_report+0x258/0x380
[   53.796715]  ? seg6_do_srh_encap+0x284/0x620
[   53.796722]  memmove+0x34/0x50
[   53.796730]  seg6_do_srh_encap+0x284/0x620
[   53.796741]  ? seg6_do_srh+0x29b/0x360
[   53.796747]  seg6_do_srh+0x29b/0x360
[   53.796756]  seg6_input+0x2e/0x2e0
[   53.796765]  lwtunnel_input+0x93/0xd0
[   53.796774]  ipv6_rcv+0x690/0x920
[   53.796783]  ? ip6_input+0x170/0x170
[   53.796791]  ? eth_gro_receive+0x2d0/0x2d0
[   53.796800]  ? ip6_input+0x170/0x170
[   53.796809]  __netif_receive_skb_core+0xcc0/0x13f0
[   53.796820]  ? netdev_info+0x110/0x110
[   53.796827]  ? napi_complete_done+0xb6/0x170
[   53.796834]  ? e1000_clean+0x6da/0xf70
[   53.796845]  ? process_backlog+0x129/0x2a0
[   53.796853]  process_backlog+0x129/0x2a0
[   53.796862]  net_rx_action+0x211/0x5c0
[   53.796870]  ? napi_complete_done+0x170/0x170
[   53.796887]  ? run_rebalance_domains+0x11f/0x150
[   53.796891]  __do_softirq+0x10e/0x39e
[   53.796894]  do_softirq_own_stack+0x2a/0x40
[   53.796895]  </IRQ>
[   53.796898]  do_softirq.part.16+0x54/0x60
[   53.796900]  __local_bh_enable_ip+0x5b/0x60
[   53.796903]  ip6_finish_output2+0x416/0x9f0
[   53.796906]  ? ip6_dst_lookup_flow+0x110/0x110
[   53.796909]  ? ip6_sk_dst_lookup_flow+0x390/0x390
[   53.796911]  ? __rcu_read_unlock+0x66/0x80
[   53.796913]  ? ip6_mtu+0x44/0xf0
[   53.796916]  ? ip6_output+0xfc/0x220
[   53.796918]  ip6_output+0xfc/0x220
[   53.796921]  ? ip6_finish_output+0x2b0/0x2b0
[   53.796923]  ? memcpy+0x34/0x50
[   53.796926]  ip6_send_skb+0x43/0xc0
[   53.796929]  rawv6_sendmsg+0x1216/0x1530
[   53.796932]  ? __orc_find+0x6b/0xc0
[   53.796934]  ? rawv6_rcv_skb+0x160/0x160
[   53.796937]  ? __rcu_read_unlock+0x66/0x80
[   53.796939]  ? __rcu_read_unlock+0x66/0x80
[   53.796942]  ? is_bpf_text_address+0x1e/0x30
[   53.796944]  ? kernel_text_address+0xec/0x100
[   53.796946]  ? __kernel_text_address+0xe/0x30
[   53.796948]  ? unwind_get_return_address+0x2f/0x50
[   53.796950]  ? __save_stack_trace+0x92/0x100
[   53.796954]  ? save_stack+0x89/0xb0
[   53.796956]  ? kasan_kmalloc+0xa0/0xd0
[   53.796958]  ? kmem_cache_alloc+0xd2/0x1f0
[   53.796961]  ? prepare_creds+0x23/0x160
[   53.796963]  ? __x64_sys_capset+0x252/0x3e0
[   53.796966]  ? do_syscall_64+0x69/0x160
[   53.796968]  ? entry_SYSCALL_64_after_hwframe+0x44/0xa9
[   53.796971]  ? __alloc_pages_nodemask+0x170/0x380
[   53.796973]  ? __alloc_pages_slowpath+0x12c0/0x12c0
[   53.796977]  ? tty_vhangup+0x20/0x20
[   53.796979]  ? policy_nodemask+0x1a/0x90
[   53.796982]  ? __mod_node_page_state+0x8d/0xa0
[   53.796986]  ? __check_object_size+0xe7/0x240
[   53.796989]  ? __sys_sendto+0x229/0x290
[   53.796991]  ? rawv6_rcv_skb+0x160/0x160
[   53.796993]  __sys_sendto+0x229/0x290
[   53.796996]  ? __ia32_sys_getpeername+0x50/0x50
[   53.796999]  ? commit_creds+0x2de/0x520
[   53.797002]  ? security_capset+0x57/0x70
[   53.797004]  ? __x64_sys_capset+0x29f/0x3e0
[   53.797007]  ? __x64_sys_rt_sigsuspend+0xe0/0xe0
[   53.797011]  ? __do_page_fault+0x664/0x770
[   53.797014]  __x64_sys_sendto+0x74/0x90
[   53.797017]  do_syscall_64+0x69/0x160
[   53.797019]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[   53.797022] RIP: 0033:0x7f43b7a6714a
[   53.797023] RSP: 002b:00007ffd891bd368 EFLAGS: 00000246 ORIG_RAX:
000000000000002c
[   53.797026] RAX: ffffffffffffffda RBX: 00000000006129c0 RCX: 00007f43b7a6714a
[   53.797028] RDX: 0000000000000040 RSI: 00000000006129c0 RDI: 0000000000000004
[   53.797029] RBP: 00007ffd891be640 R08: 0000000000610940 R09: 000000000000001c
[   53.797030] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000040
[   53.797032] R13: 000000000060e6a0 R14: 0000000000008004 R15: 000000000040b661

[   53.797171] Allocated by task 642:
[   53.797460]  kasan_kmalloc+0xa0/0xd0
[   53.797463]  kmem_cache_alloc+0xd2/0x1f0
[   53.797465]  getname_flags+0x40/0x210
[   53.797467]  user_path_at_empty+0x1d/0x40
[   53.797469]  do_faccessat+0x12a/0x320
[   53.797471]  do_syscall_64+0x69/0x160
[   53.797473]  entry_SYSCALL_64_after_hwframe+0x44/0xa9

[   53.797607] Freed by task 642:
[   53.797869]  __kasan_slab_free+0x130/0x180
[   53.797871]  kmem_cache_free+0xa8/0x230
[   53.797872]  filename_lookup+0x15b/0x230
[   53.797874]  do_faccessat+0x12a/0x320
[   53.797876]  do_syscall_64+0x69/0x160
[   53.797878]  entry_SYSCALL_64_after_hwframe+0x44/0xa9

[   53.798014] The buggy address belongs to the object at ffff88011975e600
                which belongs to the cache names_cache of size 4096
[   53.799043] The buggy address is located 1786 bytes inside of
                4096-byte region [ffff88011975e600, ffff88011975f600)
[   53.800013] The buggy address belongs to the page:
[   53.800414] page:ffffea000465d600 count:1 mapcount:0
mapping:0000000000000000 index:0x0 compound_mapcount: 0
[   53.801259] flags: 0x17fff0000008100(slab|head)
[   53.801640] raw: 017fff0000008100 0000000000000000 0000000000000000
0000000100070007
[   53.803147] raw: dead000000000100 dead000000000200 ffff88011b185a40
0000000000000000
[   53.803787] page dumped because: kasan: bad access detected

[   53.804384] Memory state around the buggy address:
[   53.804788]  ffff88011975eb80: fb fb fb fb fb fb fb fb fb fb fb fb
fb fb fb fb
[   53.805384]  ffff88011975ec00: fb fb fb fb fb fb fb fb fb fb fb fb
fb fb fb fb
[   53.805979] >ffff88011975ec80: fb fb fb fb fb fb fb fb fb fb fb fb
fb fb fb fb
[   53.806577]                                                                 ^
[   53.807165]  ffff88011975ed00: fb fb fb fb fb fb fb fb fb fb fb fb
fb fb fb fb
[   53.807762]  ffff88011975ed80: fb fb fb fb fb fb fb fb fb fb fb fb
fb fb fb fb
[   53.808356] ==================================================================
[   53.808949] Disabling lock debugging due to kernel taint

Fixes: 6c8702c6 ("ipv6: sr: add support for SRH encapsulation and injection with lwtunnels")
Signed-off-by: David Lebrun <dlebrun@google.com>
Signed-off-by: Mathieu Xhonneux <m.xhonneux@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pablo Neira Ayuso says:

====================
Netfilter/IPVS fixes for net

The following patchset contains Netfilter/IPVS fixes for your net tree:

1) Null pointer dereference when dumping conntrack helper configuration,
   from Taehee Yoo.

2) Missing sanitization in ebtables extension name through compat,
   from Paolo Abeni.

3) Broken fetch of tracing value, from Taehee Yoo.

4) Incorrect arithmetics in packet ratelimiting.

5) Buffer overflow in IPVS sync daemon, from Julian Anastasov.

6) Wrong argument to nla_strlcpy() in nfnetlink_{acct,cthelper},
   from Eric Dumazet.

7) Fix splat in nft_update_chain_stats().

8) Null pointer dereference from object netlink dump path, from
   Taehee Yoo.

9) Missing static_branch_inc() when enabling counters in existing
   chain, from Taehee Yoo.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

When a chain is updated, a counter can be attached. if so,
the nft_counters_enabled should be increased.

test commands:

   %nft add table ip filter
   %nft add chain ip filter input { type filter hook input priority 4\; }
   %iptables-compat -Z input
   %nft delete chain ip filter input

we can see below messages.

[  286.443720] jump label: negative count!
[  286.448278] WARNING: CPU: 0 PID: 1459 at kernel/jump_label.c:197 __static_key_slow_dec_cpuslocked+0x6f/0xf0
[  286.449144] Modules linked in: nf_tables nfnetlink ip_tables x_tables
[  286.449144] CPU: 0 PID: 1459 Comm: nft Tainted: G        W         4.17.0-rc2+ #12
[  286.449144] RIP: 0010:__static_key_slow_dec_cpuslocked+0x6f/0xf0
[  286.449144] RSP: 0018:ffff88010e5176f0 EFLAGS: 00010286
[  286.449144] RAX: 000000000000001b RBX: ffffffffc0179500 RCX: ffffffffb8a82522
[  286.449144] RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffff88011b7e5eac
[  286.449144] RBP: 0000000000000000 R08: ffffed00236fce5c R09: ffffed00236fce5b
[  286.449144] R10: ffffffffc0179503 R11: ffffed00236fce5c R12: 0000000000000000
[  286.449144] R13: ffff88011a28e448 R14: ffff88011a28e470 R15: dffffc0000000000
[  286.449144] FS:  00007f0384328700(0000) GS:ffff88011b600000(0000) knlGS:0000000000000000
[  286.449144] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  286.449144] CR2: 00007f038394bf10 CR3: 0000000104a86000 CR4: 00000000001006f0
[  286.449144] Call Trace:
[  286.449144]  static_key_slow_dec+0x6a/0x70
[  286.449144]  nf_tables_chain_destroy+0x19d/0x210 [nf_tables]
[  286.449144]  nf_tables_commit+0x1891/0x1c50 [nf_tables]
[  286.449144]  nfnetlink_rcv+0x1148/0x13d0 [nfnetlink]
[ ... ]
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

The table field in nft_obj_filter is not an array. In order to check
tablename, we should check if the pointer is set.

Test commands:

   %nft add table ip filter
   %nft add counter ip filter ct1
   %nft reset counters

Splat looks like:

[  306.510504] kasan: CONFIG_KASAN_INLINE enabled
[  306.516184] kasan: GPF could be caused by NULL-ptr deref or user memory access
[  306.524775] general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI
[  306.528284] Modules linked in: nft_objref nft_counter nf_tables nfnetlink ip_tables x_tables
[  306.528284] CPU: 0 PID: 1488 Comm: nft Not tainted 4.17.0-rc4+ #17
[  306.528284] Hardware name: To be filled by O.E.M. To be filled by O.E.M./Aptio CRB, BIOS 5.6.5 07/08/2015
[  306.528284] RIP: 0010:nf_tables_dump_obj+0x52c/0xa70 [nf_tables]
[  306.528284] RSP: 0018:ffff8800b6cb7520 EFLAGS: 00010246
[  306.528284] RAX: 0000000000000000 RBX: ffff8800b6c49820 RCX: 0000000000000000
[  306.528284] RDX: 0000000000000000 RSI: dffffc0000000000 RDI: ffffed0016d96e9a
[  306.528284] RBP: ffff8800b6cb75c0 R08: ffffed00236fce7c R09: ffffed00236fce7b
[  306.528284] R10: ffffffff9f6241e8 R11: ffffed00236fce7c R12: ffff880111365108
[  306.528284] R13: 0000000000000000 R14: ffff8800b6c49860 R15: ffff8800b6c49860
[  306.528284] FS:  00007f838b007700(0000) GS:ffff88011b600000(0000) knlGS:0000000000000000
[  306.528284] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  306.528284] CR2: 00007ffeafabcf78 CR3: 00000000b6cbe000 CR4: 00000000001006f0
[  306.528284] Call Trace:
[  306.528284]  netlink_dump+0x470/0xa20
[  306.528284]  __netlink_dump_start+0x5ae/0x690
[  306.528284]  ? nf_tables_getobj+0x1b3/0x740 [nf_tables]
[  306.528284]  nf_tables_getobj+0x2f5/0x740 [nf_tables]
[  306.528284]  ? nft_obj_notify+0x100/0x100 [nf_tables]
[  306.528284]  ? nf_tables_getobj+0x740/0x740 [nf_tables]
[  306.528284]  ? nf_tables_dump_flowtable_done+0x70/0x70 [nf_tables]
[  306.528284]  ? nft_obj_notify+0x100/0x100 [nf_tables]
[  306.528284]  nfnetlink_rcv_msg+0x8ff/0x932 [nfnetlink]
[  306.528284]  ? nfnetlink_rcv_msg+0x216/0x932 [nfnetlink]
[  306.528284]  netlink_rcv_skb+0x1c9/0x2f0
[  306.528284]  ? nfnetlink_bind+0x1d0/0x1d0 [nfnetlink]
[  306.528284]  ? debug_check_no_locks_freed+0x270/0x270
[  306.528284]  ? netlink_ack+0x7a0/0x7a0
[  306.528284]  ? ns_capable_common+0x6e/0x110
[ ... ]

Fixes: e46abbcc ("netfilter: nf_tables: Allow table names of up to 255 chars")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

This patch fixes the following splat.

[118709.054937] BUG: using smp_processor_id() in preemptible [00000000] code: test/1571
[118709.054970] caller is nft_update_chain_stats.isra.4+0x53/0x97 [nf_tables]
[118709.054980] CPU: 2 PID: 1571 Comm: test Not tainted 4.17.0-rc6+ #335
[...]
[118709.054992] Call Trace:
[118709.055011]  dump_stack+0x5f/0x86
[118709.055026]  check_preemption_disabled+0xd4/0xe4
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Merge misc fixes from Andrew Morton:
 "16 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  kasan: fix memory hotplug during boot
  kasan: free allocated shadow memory on MEM_CANCEL_ONLINE
  checkpatch: fix macro argument precedence test
  init/main.c: include <linux/mem_encrypt.h>
  kernel/sys.c: fix potential Spectre v1 issue
  mm/memory_hotplug: fix leftover use of struct page during hotplug
  proc: fix smaps and meminfo alignment
  mm: do not warn on offline nodes unless the specific node is explicitly requested
  mm, memory_hotplug: make has_unmovable_pages more robust
  mm/kasan: don't vfree() nonexistent vm_area
  MAINTAINERS: change hugetlbfs maintainer and update files
  ipc/shm: fix shmat() nil address after round-down when remapping
  Revert "ipc/shm: Fix shmat mmap nil-page protection"
  idr: fix invalid ptr dereference on item delete
  ocfs2: revert "ocfs2/o2hb: check len for bio_add_page() to avoid getting incorrect bio"
  mm: fix nr_rotate_swap leak in swapon() error case

Pull networking fixes from David Miller:
 "Let's begin the holiday weekend with some networking fixes:

   1) Whoops need to restrict cfg80211 wiphy names even more to 64
      bytes. From Eric Biggers.

   2) Fix flags being ignored when using kernel_connect() with SCTP,
      from Xin Long.

   3) Use after free in DCCP, from Alexey Kodanev.

   4) Need to check rhltable_init() return value in ipmr code, from Eric
      Dumazet.

   5) XDP handling fixes in virtio_net from Jason Wang.

   6) Missing RTA_TABLE in rtm_ipv4_policy[], from Roopa Prabhu.

   7) Need to use IRQ disabling spinlocks in mlx4_qp_lookup(), from Jack
      Morgenstein.

   8) Prevent out-of-bounds speculation using indexes in BPF, from
      Daniel Borkmann.

   9) Fix regression added by AF_PACKET link layer cure, from Willem de
      Bruijn.

  10) Correct ENIC dma mask, from Govindarajulu Varadarajan.

  11) Missing config options for PMTU tests, from Stefano Brivio"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (48 commits)
  ibmvnic: Fix partial success login retries
  selftests/net: Add missing config options for PMTU tests
  mlx4_core: allocate ICM memory in page size chunks
  enic: set DMA mask to 47 bit
  ppp: remove the PPPIOCDETACH ioctl
  ipv4: remove warning in ip_recv_error
  net : sched: cls_api: deal with egdev path only if needed
  vhost: synchronize IOTLB message with dev cleanup
  packet: fix reserve calculation
  net/mlx5: IPSec, Fix a race between concurrent sandbox QP commands
  net/mlx5e: When RXFCS is set, add FCS data into checksum calculation
  bpf: properly enforce index mask to prevent out-of-bounds speculation
  net/mlx4: Fix irq-unsafe spinlock usage
  net: phy: broadcom: Fix bcm_write_exp()
  net: phy: broadcom: Fix auxiliary control register reads
  net: ipv4: add missing RTA_TABLE to rtm_ipv4_policy
  net/mlx4: fix spelling mistake: "Inrerface" -> "Interface" and rephrase message
  ibmvnic: Only do H_EOI for mobility events
  tuntap: correctly set SOCKWQ_ASYNC_NOSPACE
  virtio-net: fix leaking page for gso packet during mergeable XDP
  ...

Using module_init() is wrong.  E.g.  ACPI adds and onlines memory before
our memory notifier gets registered.

This makes sure that ACPI memory detected during boot up will not result
in a kernel crash.

Easily reproducible with QEMU, just specify a DIMM when starting up.

Link: http://lkml.kernel.org/r/20180522100756.18478-3-david@redhat.com
Fixes: 786a8959 ("kasan: disable memory hotplug")
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

We have to free memory again when we cancel onlining, otherwise a later
onlining attempt will fail.

Link: http://lkml.kernel.org/r/20180522100756.18478-2-david@redhat.com
Fixes: fa69b598 ("mm/kasan: add support for memory hotplug")
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch's macro argument precedence test is broken so fix it.

Link: http://lkml.kernel.org/r/5dd900e9197febc1995604bb33c23c136d8b33ce.camel@perches.comSigned-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

In commit c7753208 ("x86, swiotlb: Add memory encryption support") a
call to function `mem_encrypt_init' was added.  Include prototype
defined in header <linux/mem_encrypt.h> to prevent a warning reported
during compilation with W=1:

  init/main.c:494:20: warning: no previous prototype for `mem_encrypt_init' [-Wmissing-prototypes]

Link: http://lkml.kernel.org/r/20180522195533.31415-1-malat@debian.orgSigned-off-by: Mathieu Malaterre <malat@debian.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Kees Cook <keescook@chromium.org>
Cc: Laura Abbott <lauraa@codeaurora.org>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Gargi Sharma <gs051095@gmail.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

`resource' can be controlled by user-space, hence leading to a potential
exploitation of the Spectre variant 1 vulnerability.

This issue was detected with the help of Smatch:

  kernel/sys.c:1474 __do_compat_sys_old_getrlimit() warn: potential spectre issue 'get_current()->signal->rlim' (local cap)
  kernel/sys.c:1455 __do_sys_old_getrlimit() warn: potential spectre issue 'get_current()->signal->rlim' (local cap)

Fix this by sanitizing *resource* before using it to index
current->signal->rlim

Notice that given that speculation windows are large, the policy is to
kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].

[1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2

Link: http://lkml.kernel.org/r/20180515030038.GA11822@embeddedor.comSigned-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The case of a new numa node got missed in avoiding using the node info
from page_struct during hotplug.  In this path we have a call to
register_mem_sect_under_node (which allows us to specify it is hotplug
so don't change the node), via link_mem_sections which unfortunately
does not.

Fix is to pass check_nid through link_mem_sections as well and disable
it in the new numa node path.

Note the bug only 'sometimes' manifests depending on what happens to be
in the struct page structures - there are lots of them and it only needs
to match one of them.

The result of the bug is that (with a new memory only node) we never
successfully call register_mem_sect_under_node so don't get the memory
associated with the node in sysfs and meminfo for the node doesn't
report it.

It came up whilst testing some arm64 hotplug patches, but appears to be
universal.  Whilst I'm triggering it by removing then reinserting memory
to a node with no other elements (thus making the node disappear then
appear again), it appears it would happen on hotplugging memory where
there was none before and it doesn't seem to be related the arm64
patches.

These patches call __add_pages (where most of the issue was fixed by
Pavel's patch).  If there is a node at the time of the __add_pages call
then all is well as it calls register_mem_sect_under_node from there
with check_nid set to false.  Without a node that function returns
having not done the sysfs related stuff as there is no node to use.
This is expected but it is the resulting path that fails...

Exact path to the problem is as follows:

 mm/memory_hotplug.c: add_memory_resource()

   The node is not online so we enter the 'if (new_node)' twice, on the
   second such block there is a call to link_mem_sections which calls
   into

  drivers/node.c: link_mem_sections() which calls

  drivers/node.c: register_mem_sect_under_node() which calls
     get_nid_for_pfn and keeps trying until the output of that matches
     the expected node (passed all the way down from
     add_memory_resource)

It is effectively the same fix as the one referred to in the fixes tag
just in the code path for a new node where the comments point out we
have to rerun the link creation because it will have failed in
register_new_memory (as there was no node at the time).  (actually that
comment is wrong now as we don't have register_new_memory any more it
got renamed to hotplug_memory_register in Pavel's patch).

Link: http://lkml.kernel.org/r/20180504085311.1240-1-Jonathan.Cameron@huawei.com
Fixes: fc44f7f9 ("mm/memory_hotplug: don't read nid from struct page during hotplug")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Pavel Tatashin <pasha.tatashin@oracle.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The 4.17-rc /proc/meminfo and /proc/<pid>/smaps look ugly: single-digit
numbers (commonly 0) are misaligned.

Remove seq_put_decimal_ull_width()'s leftover optimization for single
digits: it's wrong now that num_to_str() takes care of the width.

Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1805241554210.1326@eggly.anvils
Fixes: d1be35cb ("proc: add seq_put_decimal_ull_width to speed up /proc/pid/smaps")
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Andrei Vagin <avagin@openvz.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Oscar has noticed that we splat

   WARNING: CPU: 0 PID: 64 at ./include/linux/gfp.h:467 vmemmap_alloc_block+0x4e/0xc9
   [...]
   CPU: 0 PID: 64 Comm: kworker/u4:1 Tainted: G        W   E     4.17.0-rc5-next-20180517-1-default+ #66
   Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014
   Workqueue: kacpi_hotplug acpi_hotplug_work_fn
   Call Trace:
    vmemmap_populate+0xf2/0x2ae
    sparse_mem_map_populate+0x28/0x35
    sparse_add_one_section+0x4c/0x187
    __add_pages+0xe7/0x1a0
    add_pages+0x16/0x70
    add_memory_resource+0xa3/0x1d0
    add_memory+0xe4/0x110
    acpi_memory_device_add+0x134/0x2e0
    acpi_bus_attach+0xd9/0x190
    acpi_bus_scan+0x37/0x70
    acpi_device_hotplug+0x389/0x4e0
    acpi_hotplug_work_fn+0x1a/0x30
    process_one_work+0x146/0x340
    worker_thread+0x47/0x3e0
    kthread+0xf5/0x130
    ret_from_fork+0x35/0x40

when adding memory to a node that is currently offline.

The VM_WARN_ON is just too loud without a good reason.  In this
particular case we are doing

	alloc_pages_node(node, GFP_KERNEL|__GFP_RETRY_MAYFAIL|__GFP_NOWARN, order)

so we do not insist on allocating from the given node (it is more a
hint) so we can fall back to any other populated node and moreover we
explicitly ask to not warn for the allocation failure.

Soften the warning only to cases when somebody asks for the given node
explicitly by __GFP_THISNODE.

Link: http://lkml.kernel.org/r/20180523125555.30039-3-mhocko@kernel.orgSigned-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: Oscar Salvador <osalvador@techadventures.net>
Tested-by: Oscar Salvador <osalvador@techadventures.net>
Reviewed-by: Pavel Tatashin <pasha.tatashin@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Reza Arbab <arbab@linux.vnet.ibm.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Oscar has reported:
: Due to an unfortunate setting with movablecore, memblocks containing bootmem
: memory (pages marked by get_page_bootmem()) ended up marked in zone_movable.
: So while trying to remove that memory, the system failed in do_migrate_range
: and __offline_pages never returned.
:
: This can be reproduced by running
: qemu-system-x86_64 -m 6G,slots=8,maxmem=8G -numa node,mem=4096M -numa node,mem=2048M
: and movablecore=4G kernel command line
:
: linux kernel: BIOS-provided physical RAM map:
: linux kernel: BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
: linux kernel: BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
: linux kernel: BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
: linux kernel: BIOS-e820: [mem 0x0000000000100000-0x00000000bffdffff] usable
: linux kernel: BIOS-e820: [mem 0x00000000bffe0000-0x00000000bfffffff] reserved
: linux kernel: BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
: linux kernel: BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
: linux kernel: BIOS-e820: [mem 0x0000000100000000-0x00000001bfffffff] usable
: linux kernel: NX (Execute Disable) protection: active
: linux kernel: SMBIOS 2.8 present.
: linux kernel: DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org
: linux kernel: Hypervisor detected: KVM
: linux kernel: e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
: linux kernel: e820: remove [mem 0x000a0000-0x000fffff] usable
: linux kernel: last_pfn = 0x1c0000 max_arch_pfn = 0x400000000
:
: linux kernel: SRAT: PXM 0 -> APIC 0x00 -> Node 0
: linux kernel: SRAT: PXM 1 -> APIC 0x01 -> Node 1
: linux kernel: ACPI: SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
: linux kernel: ACPI: SRAT: Node 0 PXM 0 [mem 0x00100000-0xbfffffff]
: linux kernel: ACPI: SRAT: Node 0 PXM 0 [mem 0x100000000-0x13fffffff]
: linux kernel: ACPI: SRAT: Node 1 PXM 1 [mem 0x140000000-0x1bfffffff]
: linux kernel: ACPI: SRAT: Node 0 PXM 0 [mem 0x1c0000000-0x43fffffff] hotplug
: linux kernel: NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xbfffffff] -> [mem 0x0
: linux kernel: NUMA: Node 0 [mem 0x00000000-0xbfffffff] + [mem 0x100000000-0x13fffffff] -> [mem 0
: linux kernel: NODE_DATA(0) allocated [mem 0x13ffd6000-0x13fffffff]
: linux kernel: NODE_DATA(1) allocated [mem 0x1bffd3000-0x1bfffcfff]
:
: zoneinfo shows that the zone movable is placed into both numa nodes:
: Node 0, zone  Movable
:   pages free     160140
:         min      1823
:         low      2278
:         high     2733
:         spanned  262144
:         present  262144
:         managed  245670
: Node 1, zone  Movable
:   pages free     448427
:         min      3827
:         low      4783
:         high     5739
:         spanned  524288
:         present  524288
:         managed  515766

Note how only Node 0 has a hutplugable memory region which would rule it
out from the early memblock allocations (most likely memmap).  Node1
will surely contain memmaps on the same node and those would prevent
offlining to succeed.  So this is arguably a configuration issue.
Although one could argue that we should be more clever and rule early
allocations from the zone movable.  This would be correct but probably
not worth the effort considering what a hack movablecore is.

Anyway, We could do better for those cases though.  We rely on
start_isolate_page_range resp.  has_unmovable_pages to do their job.
The first one isolates the whole range to be offlined so that we do not
allocate from it anymore and the later makes sure we are not stumbling
over non-migrateable pages.

has_unmovable_pages is overly optimistic, however.  It doesn't check all
the pages if we are withing zone_movable because we rely that those
pages will be always migrateable.  As it turns out we are still not
perfect there.  While bootmem pages in zonemovable sound like a clear
bug which should be fixed let's remove the optimization for now and warn
if we encounter unmovable pages in zone_movable in the meantime.  That
should help for now at least.

Btw.  this wasn't a real problem until commit 72b39cfc ("mm,
memory_hotplug: do not fail offlining too early") because we used to
have a small number of retries and then failed.  This turned out to be
too fragile though.

Link: http://lkml.kernel.org/r/20180523125555.30039-2-mhocko@kernel.orgSigned-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: Oscar Salvador <osalvador@techadventures.net>
Tested-by: Oscar Salvador <osalvador@techadventures.net>
Reviewed-by: Pavel Tatashin <pasha.tatashin@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Reza Arbab <arbab@linux.vnet.ibm.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

KASAN uses different routines to map shadow for hot added memory and
memory obtained in boot process.  Attempt to offline memory onlined by
normal boot process leads to this:

    Trying to vfree() nonexistent vm area (000000005d3b34b9)
    WARNING: CPU: 2 PID: 13215 at mm/vmalloc.c:1525 __vunmap+0x147/0x190

    Call Trace:
     kasan_mem_notifier+0xad/0xb9
     notifier_call_chain+0x166/0x260
     __blocking_notifier_call_chain+0xdb/0x140
     __offline_pages+0x96a/0xb10
     memory_subsys_offline+0x76/0xc0
     device_offline+0xb8/0x120
     store_mem_state+0xfa/0x120
     kernfs_fop_write+0x1d5/0x320
     __vfs_write+0xd4/0x530
     vfs_write+0x105/0x340
     SyS_write+0xb0/0x140

Obviously we can't call vfree() to free memory that wasn't allocated via
vmalloc().  Use find_vm_area() to see if we can call vfree().

Unfortunately it's a bit tricky to properly unmap and free shadow
allocated during boot, so we'll have to keep it.  If memory will come
online again that shadow will be reused.

Matthew asked: how can you call vfree() on something that isn't a
vmalloc address?

  vfree() is able to free any address returned by
  __vmalloc_node_range().  And __vmalloc_node_range() gives you any
  address you ask.  It doesn't have to be an address in [VMALLOC_START,
  VMALLOC_END] range.

  That's also how the module_alloc()/module_memfree() works on
  architectures that have designated area for modules.

[aryabinin@virtuozzo.com: improve comments]
  Link: http://lkml.kernel.org/r/dabee6ab-3a7a-51cd-3b86-5468718e0390@virtuozzo.com
[akpm@linux-foundation.org: fix typos, reflow comment]
Link: http://lkml.kernel.org/r/20180201163349.8700-1-aryabinin@virtuozzo.com
Fixes: fa69b598 ("mm/kasan: add support for memory hotplug")
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Reported-by: Paul Menzel <pmenzel+linux-kasan-dev@molgen.mpg.de>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The current hugetlbfs maintainer has not been active for more than a few
years.  I have been been active in this area for more than two years and
plan to remain active in the foreseeable future.

Also, update the hugetlbfs entry to include linux-mm mail list and
additional hugetlbfs related files.  hugetlb.c and hugetlb.h are not
100% hugetlbfs, but a majority of their content is hugetlbfs related.

Link: http://lkml.kernel.org/r/20180518225236.19079-1-mike.kravetz@oracle.comSigned-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Nadia Yvette Chambers <nyc@holomorphy.com>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

shmat()'s SHM_REMAP option forbids passing a nil address for; this is in
fact the very first thing we check for.  Andrea reported that for
SHM_RND|SHM_REMAP cases we can end up bypassing the initial addr check,
but we need to check again if the address was rounded down to nil.  As
of this patch, such cases will return -EINVAL.

Link: http://lkml.kernel.org/r/20180503204934.kk63josdu6u53fbd@linux-n805Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Reported-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Joe Lawrence <joe.lawrence@redhat.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Patch series "ipc/shm: shmat() fixes around nil-page".

These patches fix two issues reported[1] a while back by Joe and Andrea
around how shmat(2) behaves with nil-page.

The first reverts a commit that it was incorrectly thought that mapping
nil-page (address=0) was a no no with MAP_FIXED.  This is not the case,
with the exception of SHM_REMAP; which is address in the second patch.

I chose two patches because it is easier to backport and it explicitly
reverts bogus behaviour.  Both patches ought to be in -stable and ltp
testcases need updated (the added testcase around the cve can be
modified to just test for SHM_RND|SHM_REMAP).

[1] lkml.kernel.org/r/20180430172152.nfa564pvgpk3ut7p@linux-n805

This patch (of 2):

Commit 95e91b83 ("ipc/shm: Fix shmat mmap nil-page protection")
worked on the idea that we should not be mapping as root addr=0 and
MAP_FIXED.  However, it was reported that this scenario is in fact
valid, thus making the patch both bogus and breaks userspace as well.

For example X11's libint10.so relies on shmat(1, SHM_RND) for lowmem
initialization[1].

[1] https://cgit.freedesktop.org/xorg/xserver/tree/hw/xfree86/os-support/linux/int10/linux.c#n347
Link: http://lkml.kernel.org/r/20180503203243.15045-2-dave@stgolabs.net
Fixes: 95e91b83 ("ipc/shm: Fix shmat mmap nil-page protection")
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Reported-by: Joe Lawrence <joe.lawrence@redhat.com>
Reported-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

If the radix tree underlying the IDR happens to be full and we attempt
to remove an id which is larger than any id in the IDR, we will call
__radix_tree_delete() with an uninitialised 'slot' pointer, at which
point anything could happen.  This was easiest to hit with a single
entry at id 0 and attempting to remove a non-0 id, but it could have
happened with 64 entries and attempting to remove an id >= 64.

Roman said:

  The syzcaller test boils down to opening /dev/kvm, creating an
  eventfd, and calling a couple of KVM ioctls. None of this requires
  superuser. And the result is dereferencing an uninitialized pointer
  which is likely a crash. The specific path caught by syzbot is via
  KVM_HYPERV_EVENTD ioctl which is new in 4.17. But I guess there are
  other user-triggerable paths, so cc:stable is probably justified.

Matthew added:

  We have around 250 calls to idr_remove() in the kernel today. Many of
  them pass an ID which is embedded in the object they're removing, so
  they're safe. Picking a few likely candidates:

  drivers/firewire/core-cdev.c looks unsafe; the ID comes from an ioctl.
  drivers/gpu/drm/amd/amdgpu/amdgpu_ctx.c is similar
  drivers/atm/nicstar.c could be taken down by a handcrafted packet

Link: http://lkml.kernel.org/r/20180518175025.GD6361@bombadil.infradead.org
Fixes: 0a835c4f ("Reimplement IDR and IDA using the radix tree")
Reported-by: <syzbot+35666cba7f0a337e2e79@syzkaller.appspotmail.com>
Debugged-by: Roman Kagan <rkagan@virtuozzo.com>
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This reverts commit ba16ddfb ("ocfs2/o2hb: check len for
bio_add_page() to avoid getting incorrect bio").

In my testing, this patch introduces a problem that mkfs can't have
slots more than 16 with 4k block size.

And the original logic is safe actually with the situation it mentions
so revert this commit.

Attach test log:
  (mkfs.ocfs2,27479,2):o2hb_setup_one_bio:463 page 0, vec_len = 4096, vec_start = 0
  (mkfs.ocfs2,27479,2):o2hb_setup_one_bio:463 page 1, vec_len = 4096, vec_start = 0
  (mkfs.ocfs2,27479,2):o2hb_setup_one_bio:463 page 2, vec_len = 4096, vec_start = 0
  (mkfs.ocfs2,27479,2):o2hb_setup_one_bio:463 page 3, vec_len = 4096, vec_start = 0
  (mkfs.ocfs2,27479,2):o2hb_setup_one_bio:463 page 4, vec_len = 4096, vec_start = 0
  (mkfs.ocfs2,27479,2):o2hb_setup_one_bio:463 page 5, vec_len = 4096, vec_start = 0
  (mkfs.ocfs2,27479,2):o2hb_setup_one_bio:463 page 6, vec_len = 4096, vec_start = 0
  (mkfs.ocfs2,27479,2):o2hb_setup_one_bio:463 page 7, vec_len = 4096, vec_start = 0
  (mkfs.ocfs2,27479,2):o2hb_setup_one_bio:463 page 8, vec_len = 4096, vec_start = 0
  (mkfs.ocfs2,27479,2):o2hb_setup_one_bio:463 page 9, vec_len = 4096, vec_start = 0
  (mkfs.ocfs2,27479,2):o2hb_setup_one_bio:463 page 10, vec_len = 4096, vec_start = 0
  (mkfs.ocfs2,27479,2):o2hb_setup_one_bio:463 page 11, vec_len = 4096, vec_start = 0
  (mkfs.ocfs2,27479,2):o2hb_setup_one_bio:463 page 12, vec_len = 4096, vec_start = 0
  (mkfs.ocfs2,27479,2):o2hb_setup_one_bio:463 page 13, vec_len = 4096, vec_start = 0
  (mkfs.ocfs2,27479,2):o2hb_setup_one_bio:463 page 14, vec_len = 4096, vec_start = 0
  (mkfs.ocfs2,27479,2):o2hb_setup_one_bio:463 page 15, vec_len = 4096, vec_start = 0
  (mkfs.ocfs2,27479,2):o2hb_setup_one_bio:463 page 16, vec_len = 4096, vec_start = 0
  (mkfs.ocfs2,27479,2):o2hb_setup_one_bio:471 ERROR: Adding page[16] to bio failed, page ffffea0002d7ed40, len 0, vec_len 4096, vec_start 0,bi_sector 8192
  (mkfs.ocfs2,27479,2):o2hb_read_slots:500 ERROR: status = -5
  (mkfs.ocfs2,27479,2):o2hb_populate_slot_data:1911 ERROR: status = -5
  (mkfs.ocfs2,27479,2):o2hb_region_dev_write:2012 ERROR: status = -5

Link: http://lkml.kernel.org/r/SIXPR06MB0461721F398A5A92FC68C39ED5920@SIXPR06MB0461.apcprd06.prod.outlook.comSigned-off-by: Changwei Ge <ge.changwei@h3c.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Yiwen Jiang <jiangyiwen@huawei.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

If swapon() fails after incrementing nr_rotate_swap, we don't decrement
it and thus effectively leak it.  Make sure we decrement it if we
incremented it.

Link: http://lkml.kernel.org/r/b6fe6b879f17fa68eee6cbd876f459f6e5e33495.1526491581.git.osandov@fb.com
Fixes: 81a0298b ("mm, swap: don't use VMA based swap readahead if HDD is used as swap")
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Rik van Riel <riel@surriel.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

In its current state, the driver will handle backing device
login in a loop for a certain number of retries while the
device returns a partial success, indicating that the driver
may need to try again using a smaller number of resources.

The variable it checks to continue retrying may change
over the course of operations, resulting in reallocation
of resources but exits without sending the login attempt.
Guard against this by introducing a boolean variable that
will retain the state indicating that the driver needs to
reattempt login with backing device firmware.
Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Daniel Borkmann says:

====================
pull-request: bpf 2018-05-24

The following pull-request contains BPF updates for your *net* tree.

The main changes are:

1) Fix a bug in the original fix to prevent out of bounds speculation when
   multiple tail call maps from different branches or calls end up at the
   same tail call helper invocation, from Daniel.

2) Two selftest fixes, one in reuseport_bpf_numa where test is skipped in
   case of missing numa support and another one to update kernel config to
   properly support xdp_meta.sh test, from Anders.

 ...

Would be great if you have a chance to merge net into net-next after that.

The verifier fix would be needed later as a dependency in bpf-next for
upcomig work there. When you do the merge there's a trivial conflict on
BPF side with 849fa506 ("bpf/verifier: refine retval R0 state for
bpf_get_stack helper"): Resolution is to keep both functions, the
do_refine_retval_range() and record_func_map().
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

PMTU tests in pmtu.sh need support for VTI, VTI6 and dummy
interfaces: add them to config file.
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Fixes: d1f1b9cb ("selftests: net: Introduce first PMTU test")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Simon Wunderlich says:

====================
Here are some batman-adv bugfixes:

 - prevent hardif_put call with NULL parameter, by Colin Ian King

 - Avoid race in Translation Table allocator, by Sven Eckelmann

 - Fix Translation Table sync flags for intermediate Responses,
   by Linus Luessing

 - prevent sending inconsistent Translation Table TVLVs,
   by Marek Lindner
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull more arm64 fixes from Will Deacon:

 - fix application of read-only permissions to kernel section mappings

 - sanitise reported ESR values for signals delivered on a kernel
   address

 - ensure tishift GCC helpers are exported to modules

 - fix inline asm constraints for some LSE atomics

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: Make sure permission updates happen for pmd/pud
  arm64: fault: Don't leak data in ESR context for user fault on kernel VA
  arm64: export tishift functions to modules
  arm64: lse: Add early clobbers to some input/output asm operands

Pull powerpc fix from Michael Ellerman:
 "Just one fix, to make sure the PCR (Processor Compatibility Register)
  is reset on boot.

  Otherwise if we're running in compat mode in a guest (eg. pretending a
  Power9 is a Power8) and the host kernel oopses and kdumps then the
  kdump kernel's userspace will be running in Power8 mode, and will
  SIGILL if it uses Power9-only instructions.

  Thanks to Michael Neuling"

* tag 'powerpc-4.17-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/64s: Clear PCR on boot

Pull MMC fixes from Ulf Hansson:
 "MMC core:
   - Propagate correct error code for RPMB requests

  MMC host:
   - sdhci-iproc: Drop hard coded cap for 1.8v
   - sdhci-iproc: Fix 32bit writes for transfer mode
   - sdhci-iproc: Enable SDHCI_QUIRK2_HOST_OFF_CARD_ON for cygnus"

* tag 'mmc-v4.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: sdhci-iproc: add SDHCI_QUIRK2_HOST_OFF_CARD_ON for cygnus
  mmc: sdhci-iproc: fix 32bit writes for TRANSFER_MODE register
  mmc: sdhci-iproc: remove hard coded mmc cap 1.8v
  mmc: block: propagate correct returned value in mmc_rpmb_ioctl

Pull drm fixes from Dave Airlie:
 "Only two sets of drivers fixes: one rcar-du lvds regression fix, and a
  group of fixes for vmwgfx"

* tag 'drm-fixes-for-v4.17-rc7' of git://people.freedesktop.org/~airlied/linux:
  drm/vmwgfx: Schedule an fb dirty update after resume
  drm/vmwgfx: Fix host logging / guestinfo reading error paths
  drm/vmwgfx: Fix 32-bit VMW_PORT_HB_[IN|OUT] macros
  drm: rcar-du: lvds: Fix crash in .atomic_check when disabling connector

Pull sound fixes from Takashi Iwai:
 "Two fixes:

   - a timer pause event notification was garbled upon the recent
     hardening work; corrected now

   - HD-audio runtime PM regression fix due to the incorrect return
     type"

* tag 'sound-4.17-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda - Fix runtime PM
  ALSA: timer: Fix pause event notification

When a system is under memory presure (high usage with fragments),
the original 256KB ICM chunk allocations will likely trigger kernel
memory management to enter slow path doing memory compact/migration
ops in order to complete high order memory allocations.

When that happens, user processes calling uverb APIs may get stuck
for more than 120s easily even though there are a lot of free pages
in smaller chunks available in the system.

Syslog:
...
Dec 10 09:04:51 slcc03db02 kernel: [397078.572732] INFO: task
oracle_205573_e:205573 blocked for more than 120 seconds.
...

With 4KB ICM chunk size on x86_64 arch, the above issue is fixed.

However in order to support smaller ICM chunk size, we need to fix
another issue in large size kcalloc allocations.

E.g.
Setting log_num_mtt=30 requires 1G mtt entries. With the 4KB ICM chunk
size, each ICM chunk can only hold 512 mtt entries (8 bytes for each mtt
entry). So we need a 16MB allocation for a table->icm pointer array to
hold 2M pointers which can easily cause kcalloc to fail.

The solution is to use kvzalloc to replace kcalloc which will fall back
to vmalloc automatically if kmalloc fails.
Signed-off-by: Qing Huang <qing.huang@oracle.com>
Acked-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In commit 624dbf55 ("driver/net: enic: Try DMA 64 first, then
failover to DMA") DMA mask was changed from 40 bits to 64 bits.
Hardware actually supports only 47 bits.

Fixes: 624dbf55 ("driver/net: enic: Try DMA 64 first, then failover to DMA")
Signed-off-by: Govindarajulu Varadarajan <gvaradar@cisco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The PPPIOCDETACH ioctl effectively tries to "close" the given ppp file
before f_count has reached 0, which is fundamentally a bad idea.  It
does check 'f_count < 2', which excludes concurrent operations on the
file since they would only be possible with a shared fd table, in which
case each fdget() would take a file reference.  However, it fails to
account for the fact that even with 'f_count == 1' the file can still be
linked into epoll instances.  As reported by syzbot, this can trivially
be used to cause a use-after-free.

Yet, the only known user of PPPIOCDETACH is pppd versions older than
ppp-2.4.2, which was released almost 15 years ago (November 2003).
Also, PPPIOCDETACH apparently stopped working reliably at around the
same time, when the f_count check was added to the kernel, e.g. see
https://lkml.org/lkml/2002/12/31/83.  Also, the current 'f_count < 2'
check makes PPPIOCDETACH only work in single-threaded applications; it
always fails if called from a multithreaded application.

All pppd versions released in the last 15 years just close() the file
descriptor instead.

Therefore, instead of hacking around this bug by exporting epoll
internals to modules, and probably missing other related bugs, just
remove the PPPIOCDETACH ioctl and see if anyone actually notices.  Leave
a stub in place that prints a one-time warning and returns EINVAL.

Reported-by: syzbot+16363c99d4134717c05b@syzkaller.appspotmail.com
Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Paul Mackerras <paulus@ozlabs.org>
Reviewed-by: Guillaume Nault <g.nault@alphalink.fr>
Tested-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

A precondition check in ip_recv_error triggered on an otherwise benign
race. Remove the warning.

The warning triggers when passing an ipv6 socket to this ipv4 error
handling function. RaceFuzzer was able to trigger it due to a race
in setsockopt IPV6_ADDRFORM.

  ---
  CPU0
    do_ipv6_setsockopt
      sk->sk_socket->ops = &inet_dgram_ops;

  ---
  CPU1
    sk->sk_prot->recvmsg
      udp_recvmsg
        ip_recv_error
          WARN_ON_ONCE(sk->sk_family == AF_INET6);

  ---
  CPU0
    do_ipv6_setsockopt
      sk->sk_family = PF_INET;

This socket option converts a v6 socket that is connected to a v4 peer
to an v4 socket. It updates the socket on the fly, changing fields in
sk as well as other structs. This is inherently non-atomic. It races
with the lockless udp_recvmsg path.

No other code makes an assumption that these fields are updated
atomically. It is benign here, too, as ip_recv_error cares only about
the protocol of the skbs enqueued on the error queue, for which
sk_family is not a precise predictor (thanks to another isue with
IPV6_ADDRFORM).

Link: http://lkml.kernel.org/r/20180518120826.GA19515@dragonet.kaist.ac.kr
Fixes: 7ce875e5 ("ipv4: warn once on passing AF_INET6 socket to ip_recv_error")
Reported-by: DaeRyong Jeong <threeearcat@gmail.com>
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When dealing with ingress rule on a netdev, if we did fine through the
conventional path, there's no need to continue into the egdev route,
and we can stop right there.

Not doing so may cause a 2nd rule to be added by the cls api layer
with the ingress being the egdev.

For example, under sriov switchdev scheme, a user rule of VFR A --> VFR B
will end up with two HW rules (1) VF A --> VF B and (2) uplink --> VF B

Fixes: 208c0f4b ('net: sched: use tc_setup_cb_call to call per-block callbacks')
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

DaeRyong Jeong reports a race between vhost_dev_cleanup() and
vhost_process_iotlb_msg():

Thread interleaving:
CPU0 (vhost_process_iotlb_msg)			CPU1 (vhost_dev_cleanup)
(In the case of both VHOST_IOTLB_UPDATE and
VHOST_IOTLB_INVALIDATE)

=====						=====
						vhost_umem_clean(dev->iotlb);
if (!dev->iotlb) {
	        ret = -EFAULT;
		        break;
}
						dev->iotlb = NULL;

The reason is we don't synchronize between them, fixing by protecting
vhost_process_iotlb_msg() with dev mutex.
Reported-by: DaeRyong Jeong <threeearcat@gmail.com>
Fixes: 6b1e6cc7 ("vhost: new device IOTLB API")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Saeed Mahameed says:

====================
Mellanox, mlx5 fixes 2018-05-24

This series includes two mlx5 fixes.

1) add FCS data to checksum complete when required, from Eran Ben
Elisha.

2) Fix A race in IPSec sandbox QP commands, from Yossi Kuperman.

Please pull and let me know if there's any problem.

for -stable v4.15
("net/mlx5e: When RXFCS is set, add FCS data into checksum calculation")
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit b84bbaf7 ("packet: in packet_snd start writing at link
layer allocation") ensures that packet_snd always starts writing
the link layer header in reserved headroom allocated for this
purpose.

This is needed because packets may be shorter than hard_header_len,
in which case the space up to hard_header_len may be zeroed. But
that necessary padding is not accounted for in skb->len.

The fix, however, is buggy. It calls skb_push, which grows skb->len
when moving skb->data back. But in this case packet length should not
change.

Instead, call skb_reserve, which moves both skb->data and skb->tail
back, without changing length.

Fixes: b84bbaf7 ("packet: in packet_snd start writing at link layer allocation")
Reported-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>