- 03 Jul, 2013 40 commits
-
-
Oleg Nesterov authored
Turn cn_printf(...) into cn_vprintf(va_list args), reintroduce cn_printf() as a trivial wrapper. This simplifies the next change and cn_vprintf() will have more callers. Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Colin Walters <walters@verbum.org> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Lennart Poettering <mzxreary@0pointer.de> Cc: Lucas De Marchi <lucas.de.marchi@gmail.com> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Oleg Nesterov authored
do_coredump() assumes that format_corename() can only fail if expand_corename() fails and frees cn->corename. This is not true, for example cn_print_exe_file() can fail and in this case nobody frees cn->corename. Change do_coredump() to always do kfree(cn->corename) after it calls format_corename() (NULL is fine), change expand_corename() to do nothing if kmalloc() fails. Signed-off-by:
-
Oleg Nesterov authored
call_usermodehelper_exec() does nothing but returns success if path[0] == 0. The only user which needs this strange feature is request_module(), it can check modprobe_path[0] itself like other users do if they want to detect the "disabled by admin" case. Kill it. Not only it looks strange, it can confuse other callers. And this allows us to revert 264b83c0 ("usermodehelper: check subprocess_info->path != NULL"), do_execve(NULL) is safe. Signed-off-by:
Rusty Russell <rusty@rustcorp.com.au> Cc: Lucas De Marchi <lucas.de.marchi@gmail.com> Signed-off-by:
-
Oleg Nesterov authored
sigprocmask() should die. None of the current callers actually need this strange interface. Change fs/eventpoll.c to use set_current_blocked(). This also means we should not worry about SIGKILL/SIGSTOP. Signed-off-by:
-
Andrey Vagin authored
crtools uses a parasite code for dumping processes. The parasite code is injected into a process with help PTRACE_SEIZE. Currently crtools blocks signals from a parasite code. If a process has pending signals, crtools wait while a process handles these signals. This method is not suitable for stopped tasks. A stopped task can have a few pending signals, when we will try to execute a parasite code, we will need to drop SIGSTOP, but all other signals must remain pending, because a state of processes must not be changed during checkpointing. This patch adds two ptrace commands to set/get signal-blocked mask. I think gdb can use this commands too. [akpm@linux-foundation.org: be consistent with brace layout] Signed-off-by:
Andrey Vagin <avagin@openvz.org> Reviewed-by:
-
Oleg Nesterov authored
Because it is not used. Signed-off-by:
-
Randy Dunlap authored
Add Fast User Mutexes (futexes) to kernel-locking docbook. Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Acked-by:
Rob Landley <rob@landley.net> Signed-off-by:
-
Dan Carpenter authored
A surprising number of newbies interpret this section to mean that only one return statement is allowed per function. Part of the problem is that the "one return statement per function" rule is an actual style guideline that people are used to from other projects. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Cc: Eduardo Valentin <eduardo.valentin@ti.com> Cc: Rob Landley <rob@landley.net> Signed-off-by:
-
Gu Zheng authored
Signed-off-by:
Gu Zheng <guz.fnst@cn.fujitsu.com> Acked-by:
OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by:
-
Vyacheslav Dubeyko authored
The cp_inodes_count and cp_blocks_count are represented as __le64 type in on-disk structure (struct nilfs_checkpoint). But analogous fields in in-core structure (struct nilfs_root) are represented by atomic_t type. This patch replaces atomic_t on atomic64_t type in representation of inodes_count and blocks_count fields in struct nilfs_root. Signed-off-by:
Vyacheslav Dubeyko <slava@dubeyko.com> Acked-by:
Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Acked-by:
Joern Engel <joern@logfs.org> Cc: Clemens Eisserer <linuxhippy@gmail.com> Signed-off-by:
-
Vyacheslav Dubeyko authored
Currently, NILFS2 returns 0 as free inodes count (f_ffree) and current used inodes count as total file nodes in file system (f_files): df -i Filesystem Inodes IUsed IFree IUse% Mounted on /dev/loop0 2 2 0 100% /mnt/nilfs2 This patch implements real calculation of free inodes count. First of all, it is calculated total file nodes in file system as (desc_blocks_count * groups_per_desc_block * entries_per_group). Then, it is calculated free inodes count as difference the total file nodes and used inodes count. As a result, we have such output for NILFS2: df -i Filesystem Inodes IUsed IFree IUse% Mounted on /dev/loop0 4194304 2114701 2079603 51% /mnt/nilfs2 Reported-by:
Clemens Eisserer <linuxhippy@gmail.com> Signed-off-by:
-
Xianglong Du authored
On CSR SiRFprimaII/atlasVI, there is a programmable 16-bit divider (RTC_DIV) that divides the input 32.768KHz clock to the frequency that users need (E.g. 1 Hz). The divided real-time clock will be used to drive a 32-bit counter (RTC_COUNTER) that provides users with the actual time. In each cycle of the divided real-time clock, there is a Hertz interrupt generated to the RISC. Users can also configure an alarm (RTC_ALARM). When RTC_COUNTER matches the alarm, there will be an alarm interrupt generated to the RISC. The system RTC can generate an alarm wake-up signal to notify the power controller to wake up from power saving mode. Signed-off-by:
Xianglong Du <Xianglong.Du@csr.com> Signed-off-by:
Barry Song <Baohua.Song@csr.com> Cc: Jingoo Han <jg1.han@samsung.com> Signed-off-by:
-
Fabio Porcedda authored
Use module_platform_driver_probe() macro which makes the code smaller and simpler. Signed-off-by:
Fabio Porcedda <fabio.porcedda@gmail.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Jingoo Han <jg1.han@samsung.com> Signed-off-by:
-
Hebbar Gururaja authored
rtc-omap driver modules is used both by OMAP1/2, Davinci SoC platforms. However, rtc wake support on OMAP1 is broken. Hence the device_init_wakeup() was removed from rtc-omap driver and moved to platform board files that supported it (DA850/OMAP-L138). [1] However, recently [2] it was suggested that driver should always do a device_init_wakeup(dev, true). Platforms that don't want/need wakeup support can disable it from userspace via: echo disabled > /sys/devices/.../power/wakeup Also, with the new DT boot-up, board file doesn't exist and hence there is no way to have device wakeup support rtc. The fix for above issues, is to hard code device_init_wakeup() inside driver and let platforms that don't need this, handle it through the sysfs power entry. [1] https://patchwork.kernel.org/patch/136731/ [2] http://www.mail-archive.com/davinci-linux-open-source@linux. davincidsp.com/msg26077.html Signed-off-by:Hebbar Gururaja <gururaja.hebbar@ti.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Acked-by:
Kevin Hilman <khilman@linaro.org> Signed-off-by:
-
Renaud Cerrato authored
Added support for NXP PCF2127 RTC (i2c). [akpm@linux-foundation.org: fix typo, fix warnings] Signed-off-by:
Renaud Cerrato <r.cerrato@til-technologies.fr> Cc: Jingoo Han <jg1.han@samsung.com> Signed-off-by:
-
Wei Ni authored
Enable dev as wakeup device before calling rtc_device_register(), so that it can create the "wakealarm" sysfs. Signed-off-by:
Wei Ni <wni@nvidia.com> Acked-by:
Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by:
-
Shuah Khan authored
Convert drivers/rtc/class to use dev_pm_ops for power management and remove Legacy PM ops hooks. With this change, rtc class registers suspend/resume callbacks via class->pm (dev_pm_ops) instead of Legacy class->suspend/resume. When __device_suspend() runs call-backs, it will find class->pm ops for the rtc class. Signed-off-by:
Shuah Khan <shuah.kh@samsung.com> Signed-off-by:
Jingoo Han <jg1.han@samsung.com> Cc: Shuah Khan <shuahkhan@gmail.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by:
-
Jingoo Han authored
The usage of strict_strtoul() is not preferred, because strict_strtoul() is obsolete. Thus, kstrtoul() should be used. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Chris Brand authored
If rtc->irq_task is non-NULL and task is NULL, they always rtc_irq_set_freq(), whenever err is set to -EBUSY it will then immediately be set to -EACCES, misleading the caller as to the underlying problem. Signed-off-by:
Chris Brand <chris.brand@broadcom.com> Acked-by:
Alessandro Zummo <a.zummo@towertech.it> Signed-off-by:
-
Peter Ujfalusi authored
Use module_platform_driver() to register the platform driver. Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by:
-
Peter Ujfalusi authored
Initialize the rtc_reg_map in platform_driver's probe function instead at module_init time. This way we can make sure that the twl-core has been already probed and initialized (twl_priv->twl_id is valid) since the platform device for the RTC driver will be created by the twl-core after it finished its init. Reported-by:
Christoph Fritz <chf.fritz@googlemail.com> Signed-off-by:
Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by:
-
Derek Basehore authored
The bios may clear the rtc control register when resuming the system. Since the cmos interrupt handler may now be run before the rtc_cmos is resumed, this can cause the interrupt handler to ignore an alarm since the alarm bit is not set in the rtc control register. To work around this, check if the rtc_cmos is suspended and use the stored value for the rtc control register. Signed-off-by:
Derek Basehore <dbasehore@chromium.org> Reviewed-by:
Sameer Nanda <snanda@chromium.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Jingoo Han <jg1.han@samsung.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: John Stultz <john.stultz@linaro.org> Signed-off-by:
-
Kevin Hilman authored
Currently, the RTC IRQ is never wakeup-enabled so is not capable of bringing the system out of suspend. On OMAP platforms, we have gotten by without this because the TWL RTC is on an I2C-connected chip which is capable of waking up the OMAP via the IO ring when the OMAP is in low-power states. However, if the OMAP suspends without hitting the low-power states (and the IO ring is not enabled), RTC wakeups will not work because the IRQ is not wakeup enabled. To fix, ensure the RTC IRQ is wakeup enabled whenever the RTC alarm is set. Signed-off-by:
-
Sachin Kamat authored
Use of PTR_RET() simplifies the code. Signed-off-by:
Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by:
-
Sachin Kamat authored
Use of PTR_RET() simplifies the code. Signed-off-by:
-
Sachin Kamat authored
Use of PTR_RET() simplifies the code. Signed-off-by:
-
Sachin Kamat authored
Use of PTR_RET() simplifies the code. Signed-off-by:
-
Sachin Kamat authored
Use of PTR_RET() simplifies the code. Signed-off-by:
-
Jingoo Han authored
Use the wrapper functions for getting and setting the driver data using platform_device instead of using dev_{get,set}_drvdata() with &pdev->dev, so we can directly pass a struct platform_device. Signed-off-by: -
Sergey Yanovich authored
This chip has a control register and can prevent altering saved clock. Without this patch we could have: (arm)root@pac14:~# date Tue May 21 03:08:27 MSK 2013 (arm)root@pac14:~# /etc/init.d/hwclock.sh show Tue May 21 11:13:58 2013 -0.067322 seconds (arm)root@pac14:~# /etc/init.d/hwclock.sh stop [info] Saving the system clock. [info] Hardware Clock updated to Tue May 21 03:09:01 MSK 2013. (arm)root@pac14:~# /etc/init.d/hwclock.sh show Tue May 21 11:14:15 2013 -0.624272 seconds The patch enables write access to rtc before the driver tries to write time and re-disables when time data is written. Signed-off-by:
Sergey Yanovich <ynvich@gmail.com> Acked-by:
Marc Zyngier <maz@misterjones.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Sachin Kamat <sachin.kamat@linaro.org> Cc: Jingoo Han <jg1.han@samsung.com> Signed-off-by:
-
Alexandre Torgue authored
Android expects the RTC to have second resolution. On ab8540 cut2 RTC block has a new register which allows setting seconds for wakeup alarms. Existing registers (minutes hi, mid and low) have seen their offsets changed. Here is the new mapping: * AlarmSec (A) 0x22 * AlarmMinLow (M) from 0x8 to 0x23 * AlarmMinMid (M) from 0x9 to 0x24 * AlarmMinHigh (M) from 0xA to 0x25 Signed-off-by:
Julien Delacou <julien.delacou@stericsson.com> Signed-off-by:
Alexandre Torgue <alexandre.torgue@st.com> Acked-by:
Lee Jones <lee.jones@linaro.org> Acked-by:
Linus Walleij <linus.walleij@linaro.org> Cc: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by:
-
Sachin Kamat authored
After the switch to devm_* functions and the removal of rtc_device_unregister(), the 'remove' function does not do anything. Delete it. Signed-off-by:
Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by:
-
Sachin Kamat authored
After the switch to devm_* functions and the removal of rtc_device_unregister(), the 'remove' function does not do anything. Delete it. Signed-off-by:
-
Sachin Kamat authored
After the switch to devm_* functions and the removal of rtc_device_unregister(), the 'remove' function does not do anything. Delete it. Signed-off-by:
-
Sachin Kamat authored
After the switch to devm_* functions and the removal of rtc_device_unregister(), the 'remove' function does not do anything. Delete it. Signed-off-by:
-
Sachin Kamat authored
After the switch to devm_* functions and the removal of rtc_device_unregister(), the 'remove' function does not do anything. Delete it. Signed-off-by:
-
Sachin Kamat authored
After the switch to devm_* functions and the removal of rtc_device_unregister(), the 'remove' function does not do anything. Delete it. Signed-off-by:
-
Sachin Kamat authored
After the switch to devm_* functions and the removal of rtc_device_unregister(), the 'remove' function does not do anything. Delete it. Signed-off-by:
Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by:
-
Sachin Kamat authored
After the switch to devm_* functions and the removal of rtc_device_unregister(), the 'remove' function does not do anything. Delete it. Signed-off-by:
-
Sachin Kamat authored
After the switch to devm_* functions and the removal of rtc_device_unregister(), the 'remove' function does not do anything. Delete it. Signed-off-by:
-
