Skip to content

L
linux
Switch branch/tag
  1. 17 Jan, 2020 16 commits
  3. 16 Jan, 2020 1 commit
  5. 15 Jan, 2020 23 commits
    • Jacob Keller's avatar
      devlink: fix typos in qed documentation · 1ccf6c13
      Jacob Keller authored 
      Review of the recently added documentation file for the qed driver
noticed a couple of typos. Fix them now.
Noticed-by: default avatarMichal Kalderon <mkalderon@marvell.com>
Fixes: 0f261c3c ("devlink: add a driver-specific file for the qed driver")
Signed-off-by: default avatarJacob Keller <jacob.e.keller@intel.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      1ccf6c13
    • Ulrich Weber's avatar
      pptp: support sockets bound to an interface · 43d28c61
      Ulrich Weber authored 
      use sk_bound_dev_if for route lookup as already done
in most of the other ip_route_output_ports() calls.

Since most PPPoA providers use 10.0.0.138 as default gateway IP
this will allow connections to multiple PPTP providers with the
same IP address over different interfaces.
Signed-off-by: default avatarUlrich Weber <ulrich.weber@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      43d28c61
    • David S. Miller's avatar
      Merge tag 'batadv-next-for-davem-20200114' of git://git.open-mesh.org/linux-merge · 8fec380a
      David S. Miller authored 
      Simon Wunderlich says:

====================
This feature/cleanup patchset includes the following patches:

 - bump version strings, by Simon Wunderlich

 - fix typo and kerneldocs, by Sven Eckelmann

 - use WiFi txbitrate for B.A.T.M.A.N. V as fallback, by René Treffer

 - silence some endian sparse warnings by adding annotations,
   by Sven Eckelmann

 - Update copyright years to 2020, by Sven Eckelmann

 - Disable deprecated sysfs configuration by default, by Sven Eckelmann
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      8fec380a
    • David S. Miller's avatar
      Merge branch 'bridge-add-vlan-notifications-and-rtm-support' · 4e2fa6b9
      David S. Miller authored 
      Nikolay Aleksandrov says:

====================
net: bridge: add vlan notifications and rtm support

This patch-set is a prerequisite for adding per-vlan options support
because we need to be able to send vlan-only notifications and do larger
vlan netlink dumps. Per-vlan options are needed as we move the control
more to vlans and would like to add per-vlan state (needed for per-vlan
STP and EVPN), per-vlan multicast options and control, and I'm sure
there would be many more per-vlan options coming.
Now we create/delete/dump vlans with the device AF_SPEC attribute which is
fine since we support vlan ranges or use a compact bridge_vlan_info
structure, but that cannot really be extended to support per-vlan options
well. The biggest issue is dumping them - we tried using the af_spec with
a new vlan option attribute but that led to insufficient message size
quickly, also another minor problem with that is we have to dump all vlans
always when notifying which, with options present, can be huge if they have
different options set, so we decided to add new rtm message types
specifically for vlans and register handlers for them and a new bridge vlan
notification nl group for vlan-only notifications.
The new RTM NEW/DEL/GETVLAN types introduced match the current af spec
bridge functionality and in fact use the same helpers.
The new nl format is:
 [BRIDGE_VLANDB_ENTRY]
    [BRIDGE_VLANDB_ENTRY_INFO] - bridge_vlan_info (either 1 vlan or
                                                   range start)
    [BRIDGE_VLANDB_ENTRY_RANGE] - range end

This allows to encapsulate a range in a single attribute and also to
create vlans and immediately set options on all of them with a single
attribute. The GETVLAN dump can span multiple messages and dump all the
necessary information. The vlan-only notifications are sent on
NEW/DELVLAN events or when vlan options change (currently only flags),
we try hard to compress the vlans into ranges in the notifications as
well. When the per-vlan options are added we'll add helpers to check for
option equality between neighbor vlans and will keep compressing them
when possible.

Note patch 02 is not really required, it's just a nice addition to have
human-readable error messages from the different vlan checks.

iproute2 changes and selftests will be sent with the next set which adds
the first per-vlan option - per-vlan state similar to the port state.

v2: changed patch 03 and patch 04 to use nlmsg_parse() in order to
    strictly validate the msg and make sure there are no remaining bytes
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      4e2fa6b9
    • Nikolay Aleksandrov's avatar
      net: bridge: vlan: notify on vlan add/delete/change flags · f545923b
      Nikolay Aleksandrov authored 
      Now that we can notify, send a notification on add/del or change of flags.
Notifications are also compressed when possible to reduce their number
and relieve user-space of extra processing, due to that we have to
manually notify after each add/del in order to avoid double
notifications. We try hard to notify only about the vlans which actually
changed, thus a single command can result in multiple notifications
about disjoint ranges if there were vlans which didn't change inside.
Signed-off-by: default avatarNikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f545923b
    • Nikolay Aleksandrov's avatar
      net: bridge: vlan: add rtnetlink group and notify support · cf5bddb9
      Nikolay Aleksandrov authored 
      Add a new rtnetlink group for bridge vlan notifications - RTNLGRP_BRVLAN
and add support for sending vlan notifications (both single and ranges).
No functional changes intended, the notification support will be used by
later patches.
Signed-off-by: default avatarNikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      cf5bddb9
    • Nikolay Aleksandrov's avatar
      net: bridge: vlan: add rtm range support · 0ab55879
      Nikolay Aleksandrov authored 
      Add a new vlandb nl attribute - BRIDGE_VLANDB_ENTRY_RANGE which causes
RTM_NEWVLAN/DELVAN to act on a range. Dumps now automatically compress
similar vlans into ranges. This will be also used when per-vlan options
are introduced and vlans' options match, they will be put into a single
range which is encapsulated in one netlink attribute. We need to run
similar checks as br_process_vlan_info() does because these ranges will
be used for options setting and they'll be able to skip
br_process_vlan_info().
Signed-off-by: default avatarNikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      0ab55879
    • Nikolay Aleksandrov's avatar
      net: bridge: vlan: add del rtm message support · adb3ce9b
      Nikolay Aleksandrov authored 
      Adding RTM_DELVLAN support similar to RTM_NEWVLAN is simple, just need to
map DELVLAN to DELLINK and register the handler.
Signed-off-by: default avatarNikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      adb3ce9b
    • Nikolay Aleksandrov's avatar
      net: bridge: vlan: add new rtm message support · f26b2965
      Nikolay Aleksandrov authored 
      Add initial RTM_NEWVLAN support which can only create vlans, operating
similar to the current br_afspec(). We will use it later to also change
per-vlan options. Old-style (flag-based) vlan ranges are not allowed
when using RTM messages, we will introduce vlan ranges later via a new
nested attribute which would allow us to have all the information about a
range encapsulated into a single nl attribute.
Signed-off-by: default avatarNikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f26b2965
    • Nikolay Aleksandrov's avatar
      net: bridge: vlan: add rtm definitions and dump support · 8dcea187
      Nikolay Aleksandrov authored 
      This patch adds vlan rtm definitions:
 - NEWVLAN: to be used for creating vlans, setting options and
   notifications
 - DELVLAN: to be used for deleting vlans
 - GETVLAN: used for dumping vlan information

Dumping vlans which can span multiple messages is added now with basic
information (vid and flags). We use nlmsg_parse() to validate the header
length in order to be able to extend the message with filtering
attributes later.
Signed-off-by: default avatarNikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      8dcea187
    • Nikolay Aleksandrov's avatar
      net: bridge: netlink: add extack error messages when processing vlans · 8f4cc940
      Nikolay Aleksandrov authored 
      Add extack messages on vlan processing errors. We need to move the flags
missing check after the "last" check since we may have "last" set but
lack a range end flag in the next entry.
Signed-off-by: default avatarNikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      8f4cc940
    • Nikolay Aleksandrov's avatar
      net: bridge: vlan: add helpers to check for vlan id/range validity · 5a46facb
      Nikolay Aleksandrov authored 
      Add helpers to check if a vlan id or range are valid. The range helper
must be called when range start or end are detected.
Signed-off-by: default avatarNikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      5a46facb
    • David S. Miller's avatar
      Merge branch 'net-Add-route-offload-indication' · f6310b61
      David S. Miller authored 
      Ido Schimmel says:

====================
net: Add route offload indication

This patch set adds offload indication to IPv4 and IPv6 routes. So far
offload indication was only available for the nexthop via
'RTNH_F_OFFLOAD', which is problematic as a nexthop is usually shared
between multiple routes.

Based on feedback from Roopa and David on the RFC [1], the indication is
split to 'offload' and 'trap'. This is done because not all the routes
present in hardware actually offload traffic from the kernel. For
example, host routes merely trap packets to the kernel. The two flags
are dumped to user space via the 'rtm_flags' field in the ancillary
header of the rtnetlink message.

In addition, the patch set uses the new flags in order to test the FIB
offload API by adding a dummy FIB offload implementation to netdevsim.
The new tests are added to a shared library and can be therefore shared
between different drivers.

Patches #1-#3 add offload indication to IPv4 routes.
Patches #4 adds offload indication to IPv6 routes.
Patches #5-#6 add support for the offload indication in mlxsw.
Patch #7 adds dummy FIB offload implementation in netdevsim.
Patches #8-#10 add selftests.

v2 (feedback from David Ahern):
* Patch #2: Name last argument of fib_dump_info()
* Patch #2: Move 'struct fib_rt_info' to include/net/ip_fib.h so that it
  could later be passed to fib_alias_hw_flags_set()
* Patch #3: Make use of 'struct fib_rt_info' in fib_alias_hw_flags_set()
* Patch #6: Convert to new fib_alias_hw_flags_set() interface
* Patch #7: Convert to new fib_alias_hw_flags_set() interface

[1] https://patchwork.ozlabs.org/cover/1170530/
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f6310b61
    • Ido Schimmel's avatar
      selftests: mlxsw: Add test for FIB offload API · 212a37c2
      Ido Schimmel authored 
      The test reuses the common FIB offload tests in order to make sure that
mlxsw correctly implements FIB offload.
Signed-off-by: default avatarIdo Schimmel <idosch@mellanox.com>
Acked-by: default avatarJiri Pirko <jiri@mellanox.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      212a37c2
    • Ido Schimmel's avatar
      selftests: netdevsim: Add test for FIB offload API · ffdc5149
      Ido Schimmel authored 
      Test various aspects of the FIB offload API on top of the netdevsim
implementation. Both good and bad flows are tested.
Signed-off-by: default avatarIdo Schimmel <idosch@mellanox.com>
Acked-by: default avatarJiri Pirko <jiri@mellanox.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ffdc5149
    • Ido Schimmel's avatar
      selftests: forwarding: Add helpers and tests for FIB offload · c662455b
      Ido Schimmel authored 
      Implement a set of common helpers and tests for FIB offload that can be
used by multiple drivers to check their FIB offload implementations.
Signed-off-by: default avatarIdo Schimmel <idosch@mellanox.com>
Acked-by: default avatarJiri Pirko <jiri@mellanox.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      c662455b
    • Ido Schimmel's avatar
      netdevsim: fib: Add dummy implementation for FIB offload · 48bb9eb4
      Ido Schimmel authored 
      Implement dummy IPv4 and IPv6 FIB "offload" in the driver by storing
currently "programmed" routes in a hash table. Each route in the hash
table is marked with "trap" indication. The indication is cleared when
the route is replaced or when the netdevsim instance is deleted.

This will later allow us to test the route offload API on top of
netdevsim.

v2:
* Convert to new fib_alias_hw_flags_set() interface
Signed-off-by: default avatarIdo Schimmel <idosch@mellanox.com>
Reviewed-by: default avatarJiri Pirko <jiri@mellanox.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      48bb9eb4
    • Ido Schimmel's avatar
      mlxsw: spectrum_router: Set hardware flags for routes · ee5a0448
      Ido Schimmel authored 
      Previous patches added support for two hardware flags for IPv4 and IPv6
routes: 'RTM_F_OFFLOAD' and 'RTM_F_TRAP'. Both indicate the presence of
the route in hardware. The first indicates that traffic is actually
offloaded from the kernel, whereas the second indicates that packets
hitting such routes are trapped to the kernel for processing (e.g., host
routes).

Use these two flags in mlxsw. The flags are modified in two places.
Firstly, whenever a route is updated in the device's table. This
includes the addition, deletion or update of a route. For example, when
a host route is promoted to perform NVE decapsulation, its action in the
device is updated, the 'RTM_F_OFFLOAD' flag set and the 'RTM_F_TRAP'
flag cleared.

Secondly, when a route is replaced and overwritten by another route, its
flags are cleared.

v2:
* Convert to new fib_alias_hw_flags_set() interface
Signed-off-by: default avatarIdo Schimmel <idosch@mellanox.com>
Acked-by: default avatarJiri Pirko <jiri@mellanox.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ee5a0448
    • Ido Schimmel's avatar
      mlxsw: spectrum_router: Separate nexthop offload indication from route · 8c5a5b9b
      Ido Schimmel authored 
      The driver currently uses the 'RTNH_F_OFFLOAD' flag for both routes and
nexthops, which is cumbersome and unnecessary now that we have separate
flag for the route itself.

Separate the offload indication for nexthops from routes and call it
whenever the offload state within the nexthop group changes.

Note that IPv6 (unlike IPv4) does not share the same nexthop group
between different routes, whereas mlxsw does. Therefore, whenever the
offload indication within an IPv6 nexthop group changes, all the linked
routes need to be updated.
Signed-off-by: default avatarIdo Schimmel <idosch@mellanox.com>
Acked-by: default avatarJiri Pirko <jiri@mellanox.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      8c5a5b9b
    • Ido Schimmel's avatar
      ipv6: Add "offload" and "trap" indications to routes · bb3c4ab9
      Ido Schimmel authored 
      In a similar fashion to previous patch, add "offload" and "trap"
indication to IPv6 routes.

This is done by using two unused bits in 'struct fib6_info' to hold
these indications. Capable drivers are expected to set these when
processing the various in-kernel route notifications.
Signed-off-by: default avatarIdo Schimmel <idosch@mellanox.com>
Reviewed-by: default avatarJiri Pirko <jiri@mellanox.com>
Reviewed-by: default avatarDavid Ahern <dsahern@gmail.com>
Acked-by: default avatarRoopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      bb3c4ab9
    • Ido Schimmel's avatar
      ipv4: Add "offload" and "trap" indications to routes · 90b93f1b
      Ido Schimmel authored 
      When performing L3 offload, routes and nexthops are usually programmed
into two different tables in the underlying device. Therefore, the fact
that a nexthop resides in hardware does not necessarily mean that all
the associated routes also reside in hardware and vice-versa.

While the kernel can signal to user space the presence of a nexthop in
hardware (via 'RTNH_F_OFFLOAD'), it does not have a corresponding flag
for routes. In addition, the fact that a route resides in hardware does
not necessarily mean that the traffic is offloaded. For example,
unreachable routes (i.e., 'RTN_UNREACHABLE') are programmed to trap
packets to the CPU so that the kernel will be able to generate the
appropriate ICMP error packet.

This patch adds an "offload" and "trap" indications to IPv4 routes, so
that users will have better visibility into the offload process.

'struct fib_alias' is extended with two new fields that indicate if the
route resides in hardware or not and if it is offloading traffic from
the kernel or trapping packets to it. Note that the new fields are added
in the 6 bytes hole and therefore the struct still fits in a single
cache line [1].

Capable drivers are expected to invoke fib_alias_hw_flags_set() with the
route's key in order to set the flags.

The indications are dumped to user space via a new flags (i.e.,
'RTM_F_OFFLOAD' and 'RTM_F_TRAP') in the 'rtm_flags' field in the
ancillary header.

v2:
* Make use of 'struct fib_rt_info' in fib_alias_hw_flags_set()

[1]
struct fib_alias {
        struct hlist_node  fa_list;                      /*     0    16 */
        struct fib_info *          fa_info;              /*    16     8 */
        u8                         fa_tos;               /*    24     1 */
        u8                         fa_type;              /*    25     1 */
        u8                         fa_state;             /*    26     1 */
        u8                         fa_slen;              /*    27     1 */
        u32                        tb_id;                /*    28     4 */
        s16                        fa_default;           /*    32     2 */
        u8                         offload:1;            /*    34: 0  1 */
        u8                         trap:1;               /*    34: 1  1 */
        u8                         unused:6;             /*    34: 2  1 */

        /* XXX 5 bytes hole, try to pack */

        struct callback_head rcu __attribute__((__aligned__(8))); /*    40    16 */

        /* size: 56, cachelines: 1, members: 12 */
        /* sum members: 50, holes: 1, sum holes: 5 */
        /* sum bitfield members: 8 bits (1 bytes) */
        /* forced alignments: 1, forced holes: 1, sum forced holes: 5 */
        /* last cacheline: 56 bytes */
} __attribute__((__aligned__(8)));
Signed-off-by: default avatarIdo Schimmel <idosch@mellanox.com>
Reviewed-by: default avatarDavid Ahern <dsahern@gmail.com>
Reviewed-by: default avatarJiri Pirko <jiri@mellanox.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      90b93f1b
    • Ido Schimmel's avatar
      ipv4: Encapsulate function arguments in a struct · 1e301fd0
      Ido Schimmel authored 
      fib_dump_info() is used to prepare RTM_{NEW,DEL}ROUTE netlink messages
using the passed arguments. Currently, the function takes 11 arguments,
6 of which are attributes of the route being dumped (e.g., prefix, TOS).

The next patch will need the function to also dump to user space an
indication if the route is present in hardware or not. Instead of
passing yet another argument, change the function to take a struct
containing the different route attributes.

v2:
* Name last argument of fib_dump_info()
* Move 'struct fib_rt_info' to include/net/ip_fib.h so that it could
  later be passed to fib_alias_hw_flags_set()
Signed-off-by: default avatarIdo Schimmel <idosch@mellanox.com>
Reviewed-by: default avatarDavid Ahern <dsahern@gmail.com>
Reviewed-by: default avatarJiri Pirko <jiri@mellanox.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      1e301fd0
    • Ido Schimmel's avatar
      ipv4: Replace route in list before notifying · 6324d0fa
      Ido Schimmel authored 
      Subsequent patches will add an offload / trap indication to routes which
will signal if the route is present in hardware or not.

After programming the route to the hardware, drivers will have to ask
the IPv4 code to set the flags by passing the route's key.

In the case of route replace, the new route is notified before it is
actually inserted into the FIB alias list. This can prevent simple
drivers (e.g., netdevsim) that program the route to the hardware in the
same context it is notified in from being able to set the flag.

Solve this by first inserting the new route to the list and rollback the
operation in case the route was vetoed.
Signed-off-by: default avatarIdo Schimmel <idosch@mellanox.com>
Reviewed-by: default avatarJiri Pirko <jiri@mellanox.com>
Reviewed-by: default avatarDavid Ahern <dsahern@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      6324d0fa
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7