Pull media updates from Mauro Carvalho Chehab:

 - new Mediatek drivers: mtk-mdp and mtk-vcodec

 - some additions at the media documentation

 - the CEC core and drivers were promoted from staging to mainstream

 - some cleanups at the DVB core

 - the LIRC serial driver got promoted from staging to mainstream

 - added a driver for Renesas R-Car FDP1 driver

 - add DVBv5 statistics support to mn88473 driver

 - several fixes related to printk continuation lines

 - add support for HSV encoding formats

 - lots of other cleanups, fixups and driver improvements.

* tag 'media/v4.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (496 commits)
  [media] v4l: tvp5150: Add missing break in set control handler
  [media] v4l: tvp5150: Don't inline the tvp5150_selmux() function
  [media] v4l: tvp5150: Compile tvp5150_link_setup out if !CONFIG_MEDIA_CONTROLLER
  [media] em28xx: don't store usb_device at struct em28xx
  [media] em28xx: use usb_interface for dev_foo() calls
  [media] em28xx: don't change the device's name
  [media] mn88472: fix chip id check on probe
  [media] mn88473: fix chip id check on probe
  [media] lirc: fix error paths in lirc_cdev_add()
  [media] s5p-mfc: Add support for MFC v8 available in Exynos 5433 SoCs
  [media] s5p-mfc: Rework clock handling
  [media] s5p-mfc: Don't keep clock prepared all the time
  [media] s5p-mfc: Kill all IS_ERR_OR_NULL in clocks management code
  [media] s5p-mfc: Remove dead conditional code
  [media] s5p-mfc: Ensure that clock is disabled before turning power off
  [media] s5p-mfc: Remove special clock rate management
  [media] s5p-mfc: Use printk_ratelimited for reporting ioctl errors
  [media] s5p-mfc: Set DMA_ATTR_ALLOC_SINGLE_PAGES
  [media] vivid: Set color_enc on HSV formats
  [media] v4l2-tpg: Init hv_enc field with a valid value
  ...

Pull edac updates from Mauro Carvalho Chehab:
 "This contains the conversion of the EDAC uAPI documentation to ReST
  and the addition of the EDAC kAPI documentation to the driver-api
  docs.

  It also splits the EDAC headers by their functions"

* tag 'edac/v4.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac:
  EDAC: Document HW_EVENT_ERR_DEFERRED type
  edac.rst: move concepts dictionary from edac.h
  edac: fix kenel-doc markups at edac.h
  edac: fix kernel-doc tags at the drivers/edac_*.h
  edac: adjust docs location at MAINTAINERS and 00-INDEX
  driver-api: create an edac.rst file with EDAC documentation
  edac: move documentation from edac_mc.c to edac_core.h
  edac: move documentation from edac_pci*.c to edac_pci.h
  edac: move documentation from edac_device to edac_core.h
  edac: rename edac_core.h to edac_mc.h
  edac: move EDAC device definitions to drivers/edac/edac_device.h
  edac: move EDAC PCI definitions to drivers/edac/edac_pci.h
  docs-rst: admin-guide: add documentation for EDAC
  edac.txt: Improve documentation, adding RAS introduction
  edac.txt: update information about newer Intel CPUs
  edac.txt: remove info that the Nehalem EDAC is experimental
  edac.txt: convert EDAC documentation to ReST
  edac.txt: add a section explaining the dimmX and rankX directories
  edac: edac_core.h: remove prototype for edac_pci_reset_delay_period()
  edac: edac_core.h: get rid of unused kobj_complete

Pull UML update from Richard Weinberger:
 "A performance enhancement for UML's block driver"

* 'for-linus-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
  um: UBD Improvements

Pull arch/nios2 updates from Ley Foon Tan:

 - add screen_info

 - Convert pfn_valid to static inline

 - Extend !__ASSEMBLY__ section in asm/page.h

* tag 'nios2-v4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2:
  nios2: add screen_info
  nios2: Convert pfn_valid to static inline
  nios2: Extend !__ASSEMBLY__ section in asm/page.h

Pull powerpc updates from Michael Ellerman:
 "Highlights include:

   - Support for the kexec_file_load() syscall, which is a prereq for
     secure and trusted boot.

   - Prevent kernel execution of userspace on P9 Radix (similar to
     SMEP/PXN).

   - Sort the exception tables at build time, to save time at boot, and
     store them as relative offsets to save space in the kernel image &
     memory.

   - Allow building the kernel with thin archives, which should allow us
     to build an allyesconfig once some other fixes land.

   - Build fixes to allow us to correctly rebuild when changing the
     kernel endian from big to little or vice versa.

   - Plumbing so that we can avoid doing a full mm TLB flush on P9
     Radix.

   - Initial stack protector support (-fstack-protector).

   - Support for dumping the radix (aka. Linux) and hash page tables via
     debugfs.

   - Fix an oops in cxl coredump generation when cxl_get_fd() is used.

   - Freescale updates from Scott: "Highlights include 8xx hugepage
     support, qbman fixes/cleanup, device tree updates, and some misc
     cleanup."

   - Many and varied fixes and minor enhancements as always.

  Thanks to:
    Alexey Kardashevskiy, Andrew Donnellan, Aneesh Kumar K.V, Anshuman
    Khandual, Anton Blanchard, Balbir Singh, Bartlomiej Zolnierkiewicz,
    Christophe Jaillet, Christophe Leroy, Denis Kirjanov, Elimar
    Riesebieter, Frederic Barrat, Gautham R. Shenoy, Geliang Tang, Geoff
    Levand, Jack Miller, Johan Hovold, Lars-Peter Clausen, Libin,
    Madhavan Srinivasan, Michael Neuling, Nathan Fontenot, Naveen N.
    Rao, Nicholas Piggin, Pan Xinhui, Peter Senna Tschudin, Rashmica
    Gupta, Rui Teng, Russell Currey, Scott Wood, Simon Guo, Suraj
    Jitindar Singh, Thiago Jung Bauermann, Tobias Klauser, Vaibhav Jain"

[ And thanks to Michael, who took time off from a new baby to get this
  pull request done.   - Linus ]

* tag 'powerpc-4.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (174 commits)
  powerpc/fsl/dts: add FMan node for t1042d4rdb
  powerpc/fsl/dts: add sg_2500_aqr105_phy4 alias on t1024rdb
  powerpc/fsl/dts: add QMan and BMan nodes on t1024
  powerpc/fsl/dts: add QMan and BMan nodes on t1023
  soc/fsl/qman: test: use DEFINE_SPINLOCK()
  powerpc/fsl-lbc: use DEFINE_SPINLOCK()
  powerpc/8xx: Implement support of hugepages
  powerpc: get hugetlbpage handling more generic
  powerpc: port 64 bits pgtable_cache to 32 bits
  powerpc/boot: Request no dynamic linker for boot wrapper
  soc/fsl/bman: Use resource_size instead of computation
  soc/fsl/qe: use builtin_platform_driver
  powerpc/fsl_pmc: use builtin_platform_driver
  powerpc/83xx/suspend: use builtin_platform_driver
  powerpc/ftrace: Fix the comments for ftrace_modify_code
  powerpc/perf: macros for power9 format encoding
  powerpc/perf: power9 raw event format encoding
  powerpc/perf: update attribute_group data structure
  powerpc/perf: factor out the event format field
  powerpc/mm/iommu, vfio/spapr: Put pages on VFIO container shutdown
  ...

Pull m ore s390 updates from Martin Schwidefsky:
 "Over 95% of the changes in this pull request are related to the zcrypt
  driver. There are five improvements for zcrypt: the ID for the CEX6
  cards is added, workload balancing and multi-domain support are
  introduced, the debug logs are overhauled and a set of tracepoints is
  added.

  Then there are several patches in regard to inline assemblies. One
  compile fix and several missing memory clobbers. As far as we can tell
  the omitted memory clobbers have not caused any breakage.

  A small change to the PCI arch code, the machine can tells us how big
  the function measurement blocks are. The PCI function measurement will
  be disabled for a device if the queried length is larger than the
  allocated size for these blocks.

  And two more patches to correct five printk messages.

  That is it for s390 in regard to the 4.10 merge window. Happy holidays"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (23 commits)
  s390/pci: query fmb length
  s390/zcrypt: add missing memory clobber to ap_qci inline assembly
  s390/extmem: add missing memory clobber to dcss_set_subcodes
  s390/nmi: fix inline assembly constraints
  s390/lib: add missing memory barriers to string inline assemblies
  s390/cpumf: fix qsi inline assembly
  s390/setup: reword printk messages
  s390/dasd: fix typos in DASD error messages
  s390: fix compile error with memmove_early() inline assembly
  s390/zcrypt: tracepoint definitions for zcrypt device driver.
  s390/zcrypt: Rework debug feature invocations.
  s390/zcrypt: Improved invalid domain response handling.
  s390/zcrypt: Fix ap_max_domain_id for older machine types
  s390/zcrypt: Correct function bits for CEX2x and CEX3x cards.
  s390/zcrypt: Fixed attrition of AP adapters and domains
  s390/zcrypt: Introduce new zcrypt device status API
  s390/zcrypt: add multi domain support
  s390/zcrypt: Introduce workload balancing
  s390/zcrypt: get rid of ap_poll_requests
  s390/zcrypt: header for the AP inline assmblies
  ...

Freescale updates from Scott:

"Highlights include 8xx hugepage support, qbman fixes/cleanup, device
tree updates, and some misc cleanup."

Pull NFS client updates from Trond Myklebust:
 "Highlights include:

  Stable bugfixes:
   - Fix a pnfs deadlock between read resends and layoutreturn
   - Don't invalidate the layout stateid while a layout return is
     outstanding
   - Don't schedule a layoutreturn if the layout stateid is marked as
     invalid
   - On a pNFS error, do not send LAYOUTGET until the LAYOUTRETURN is
     complete
   - SUNRPC: fix refcounting problems with auth_gss messages.

  Features:
   - Add client support for the NFSv4 umask attribute.
   - NFSv4: Correct support for flock() stateids.
   - Add a LAYOUTRETURN operation to CLOSE and DELEGRETURN when
     return-on-close is specified
   - Allow the pNFS/flexfiles layoutstat information to piggyback on
     LAYOUTRETURN
   - Optimise away redundant GETATTR calls when doing state recovery
     and/or when not required by cache revalidation rules or
     close-to-open cache consistency.
   - Attribute cache improvements
   - RPC/RDMA support for SG_GAP devices

  Bugfixes:
   - NFS: Fix performance regressions in readdir
   - pNFS/flexfiles: Fix a deadlock on LAYOUTGET
   - NFSv4: Add missing nfs_put_lock_context()
   - NFSv4.1: Fix regression in callback retry handling
   - Fix false positive NFSv4.0 trunking detection.
   - pNFS/flexfiles: Only send layoutstats updates for mirrors that were
     updated
   - Various layout stateid related bugfixes
   - RPC/RDMA bugfixes"

* tag 'nfs-for-4.10-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (82 commits)
  SUNRPC: fix refcounting problems with auth_gss messages.
  nfs: add support for the umask attribute
  pNFS/flexfiles: Ensure we have enough buffer for layoutreturn
  pNFS/flexfiles: Remove a redundant parameter in ff_layout_encode_ioerr()
  pNFS/flexfiles: Fix a deadlock on LAYOUTGET
  pNFS: Layoutreturn must free the layout after the layout-private data
  pNFS/flexfiles: Fix ff_layout_add_ds_error_locked()
  NFSv4: Add missing nfs_put_lock_context()
  pNFS: Release NFS_LAYOUT_RETURN when invalidating the layout stateid
  NFSv4.1: Don't schedule lease recovery in nfs4_schedule_session_recovery()
  NFSv4.1: Handle NFS4ERR_BADSESSION/NFS4ERR_DEADSESSION replies to OP_SEQUENCE
  NFS: Only look at the change attribute cache state in nfs_check_verifier
  NFS: Fix incorrect size revalidation when holding a delegation
  NFS: Fix incorrect mapping revalidation when holding a delegation
  pNFS/flexfiles: Support sending layoutstats in layoutreturn
  pNFS/flexfiles: Minor refactoring before adding iostats to layoutreturn
  NFS: Fix up read of mirror stats
  pNFS/flexfiles: Clean up layoutstats
  pNFS/flexfiles: Refactor encoding of the layoutreturn payload
  pNFS: Add a layoutreturn callback to performa layout-private setup
  ...

Pull virtio updates from Michael Tsirkin:
 "virtio, vhost: new device, fixes, speedups

  This includes the new virtio crypto device, and fixes all over the
  place. In particular enabling endian-ness checks for sparse builds
  found some bugs which this fixes. And it appears that everyone is in
  agreement that disabling endian-ness sparse checks shouldn't be
  necessary any longer.

  So this enables them for everyone, and drops the __CHECK_ENDIAN__ and
  __bitwise__ APIs.

  IRQ handling in virtio has been refactored somewhat, the larger switch
  to IRQ_SHARED will have to wait as it proved too aggressive"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (34 commits)
  Makefile: drop -D__CHECK_ENDIAN__ from cflags
  fs/logfs: drop __CHECK_ENDIAN__
  Documentation/sparse: drop __CHECK_ENDIAN__
  linux: drop __bitwise__ everywhere
  checkpatch: replace __bitwise__ with __bitwise
  Documentation/sparse: drop __bitwise__
  tools: enable endian checks for all sparse builds
  linux/types.h: enable endian checks for all sparse builds
  virtio_mmio: Set dev.release() to avoid warning
  vhost: remove unused feature bit
  virtio_ring: fix description of virtqueue_get_buf
  vhost/scsi: Remove unused but set variable
  tools/virtio: use {READ,WRITE}_ONCE() in uaccess.h
  vringh: kill off ACCESS_ONCE()
  tools/virtio: fix READ_ONCE()
  crypto: add virtio-crypto driver
  vhost: cache used event for better performance
  vsock: lookup and setup guest_cid inside vhost_vsock_lock
  virtio_pci: split vp_try_to_find_vqs into INTx and MSI-X variants
  virtio_pci: merge vp_free_vectors into vp_del_vqs
  ...

Pull ARM updates from Russell King:

 - an update for clkdev registration error detection to simplify users

 - add cpu capacity parsing from DT

 - support for larger cachelines found on UniPhier caches

 - documentation for udelay constants

 - properly tag assembly function declarations

 - remove unnecessary indirection of asm/mach-types.h

 - switch to syscall table based generation to simplify future additions
   of system calls, along with correpsonding commit for pkey syscalls

 - remove redundant sa1101 header file

 - RONX protect modules when they're in the vmalloc region

* 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: mm: allow set_memory_*() to be used on the vmalloc region
  ARM: mm: fix set_memory_*() bounds checks
  ARM: 8631/1: clkdev: Detect errors in clk_hw_register_clkdev() for mass registration
  ARM: 8629/1: vfp: properly tag assembly function declarations in C code
  ARM: 8622/3: add sysfs cpu_capacity attribute
  ARM: 8621/3: parse cpu capacity-dmips-mhz from DT
  ARM: 8623/1: mm: add ARM_L1_CACHE_SHIFT_7 for UniPhier outer cache
  ARM: Update mach-types
  ARM: sa1100: remove SA-1101 header file
  ARM: 8619/1: udelay: document the various constants
  ARM: wire up new pkey syscalls
  ARM: convert to generated system call tables
  ARM: remove indirection of asm/mach-types.h

Pull ARM SoC driver updates from Arnd Bergmann:
 "Driver updates for ARM SoCs, including a couple of newly added
  drivers:

   - A new driver for the power management controller on TI Keystone

   - Support for the prerelease "SCPI" firmware protocol that ended up
     being shipped by Amlogic in their GXBB SoC.

   - A soc_device can now be matched using a glob from inside the
     kernel, when another driver wants to know the specific chip it is
     running on and cannot find out from DT, firmware or hardware.

   - Renesas SoCs now support identification through the soc_device
     interface, both in user space and kernel.

   - Renesas r8a7743 and r8a7745 gain support for their system
     controller

   - A new checking module for the ARM "PSCI" (not to be confused with
     "SCPI" mentioned above) firmware interface.

   - A new driver for the Tegra GMI memory interface

   - Support for the Tegra firmware interfaces with their power
     management controllers

  As usual, the updates for the reset controller framework are merged
  here, as they tend to touch multiple SoCs as well, including a new
  driver for the Oxford (now Broadcom) OX820 chip and the Tegra bpmp
  interface.

  The existing drivers for Atmel, Qualcomm, NVIDIA, TI Davinci, and
  Rockchips SoCs see some further updates"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (76 commits)
  misc: sram: remove useless #ifdef
  drivers: psci: Allow PSCI node to be disabled
  drivers: psci: PSCI checker module
  soc: renesas: Identify SoC and register with the SoC bus
  firmware: qcom: scm: Return PTR_ERR when devm_clk_get fails
  firmware: qcom: scm: Remove core, iface and bus clocks dependency
  dt-bindings: firmware: scm: Add MSM8996 DT bindings
  memory: da8xx-ddrctl: drop the call to of_flat_dt_get_machine_name()
  bus: da8xx-mstpri: drop the call to of_flat_dt_get_machine_name()
  ARM: shmobile: Document DT bindings for Product Register
  soc: renesas: rcar-sysc: add R8A7745 support
  reset: Add Tegra BPMP reset driver
  dt-bindings: firmware: Allow child nodes inside the Tegra BPMP
  dt-bindings: Add power domains to Tegra BPMP firmware
  firmware: tegra: Add BPMP support
  firmware: tegra: Add IVC library
  dt-bindings: firmware: Add bindings for Tegra BPMP
  mailbox: tegra-hsp: Use after free in tegra_hsp_remove_doorbells()
  mailbox: Add Tegra HSP driver
  firmware: arm_scpi: add support for pre-v1.0 SCPI compatible
  ...

Pull ARM 64-bit DT updates from Arnd Bergmann:
 "A couple of interesting new SoC platforms are now supported, these are
  the respective DTS sources:

   - Samsung Exynos5433 mobile phone platform, including an (almost)
     fully supported phone reference board.
   - Hisilicon Hip07 server platform and D05 board, the latest iteration
     of their product line, now with 64 Cortex-A72 cores across two
     sockets.
   - Allwinner A64 SoC, the first 64-bit chip from their "sunxi" product
     line, used in Android tablets and ultra-cheap development boards
   - NXP LS1046A Communication processor, improving on the earlier
     LS1043A with faster CPU cores
   - Qualcomm MSM8992 (Snapdragon 808) and MSM8994 (Snapdragon 810)
     mobile phone SoCs
   - Early support for the Nvidia Tegra Tegra186 SoC
   - Amlogic S905D is a minor variant of their existing Android consumer
     product line
   - Rockchip PX5 automotive platform, a close relative of their popular
     rk3368 Android tablet chips

  Aside from the respective evaluation platforms for the above chips,
  there are only a few consumer devices and boards added this time:

   - Huawei Nexus 6P (Angler) mobile phone
   - LG Nexus 5x (Bullhead) mobile phone
   - Nexbox A1 and A95X Android TV boxes
   - Pine64 development board based on Allwinner A64
   - Globalscale Marvell ESPRESSOBin community board based on Armada 3700
   - Renesas "R-Car Starter Kit Pro" (M3ULCB) low-cost automotive board

  For the existing platforms, we get bug fixes and new peripheral
  support for Juno, Renesas, Uniphier, Amlogic, Samsung, Broadcom,
  Rockchip, Berlin, and ZTE"

* tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (168 commits)
  arm64: dts: fix build errors from missing dependencies
  ARM64: dts: meson-gxbb: add SCPI pre-1.0 compatible
  ARM64: dts: meson-gxl: Add support for Nexbox A95X
  ARM64: dts: meson-gxm: Add support for the Nexbox A1
  ARM: dts: artpec: add pcie support
  arm64: dts: berlin4ct-dmp: add missing unit name to /memory node
  arm64: dts: berlin4ct-stb: add missing unit name to /memory node
  arm64: dts: berlin4ct: add missing unit name to /soc node
  arm64: dts: qcom: msm8916: Add ddr support to sdhc1
  arm64: dts: exynos: Enable HS400 mode for eMMC for TM2
  ARM: dts: Add xo to sdhc clock node on qcom platforms
  ARM64: dts: Add support for Meson GXM
  dt-bindings: add rockchip RK1108 Evaluation board
  arm64: dts: NS2: Add PCI PHYs
  arm64: dts: NS2: enable sdio1
  arm64: dts: exynos: Add the mshc_2 node for supporting T-Flash
  arm64: tegra: Add NVIDIA P2771 board support
  arm64: tegra: Enable PSCI on P3310
  arm64: tegra: Add NVIDIA P3310 processor module support
  arm64: tegra: Add GPIO controllers on Tegra186
  ...

Pull ARM DT updates from Arnd Bergmann:
 "Lots of changes as usual, so I'm trying to be brief here. Most of the
  new hardware support has the respective driver changes merged through
  other trees or has had it available for a while, so this is where
  things come together.

  We get a DT descriptions for a couple of new SoCs, all of them
  variants of other chips we already support, and usually coming with a
  new evaluation board:

   - Oxford semiconductor (now Broadcom) OX820 SoC for NAS devices
   - Qualcomm MDM9615 LTE baseband
   - NXP imx6ull, the latest and smallest i.MX6 application processor variant
   - Renesas RZ/G (r8a7743 and r8a7745) application processors
   - Rockchip PX3, a variant of the rk3188 chip used in Android tablets
   - Rockchip rk1108 single-core application processor
   - ST stm32f746 Cortex-M7 based microcontroller
   - TI DRA71x automotive processors

  These are commercially available consumer platforms we now support:

   - Motorola Droid 4 (xt894) mobile phone
   - Rikomagic MK808 Android TV stick based on Rockchips rx3066
   - Cloud Engines PogoPlug v3 based on OX820
   - Various Broadcom based wireless devices:
      - Netgear R8500 router
      - Tenda AC9 router
      - TP-LINK Archer C9 V1
      - Luxul XAP-1510 Access point
   - Turris Omnia open hardware router based on Armada 385

  And a couple of new boards targeted at developers, makers or
  industrial integration:

   - Macnica Sodia development platform for Altera socfpga (Cyclone V)
   - MicroZed board based on Xilinx Zynq FPGA platforms
   - TOPEET itop/elite based on exynos4412
   - WP8548 MangOH Open Hardware platform for IOT, based on Qualcomm MDM9615
   - NextThing CHIP Pro gadget
   - NanoPi M1 development board
   - AM571x-IDK industrial board based on TI AM5718
   - i.MX6SX UDOO Neo
   - Boundary Devices Nitrogen6_SOM2 (i.MX6)
   - Engicam i.CoreM6
   - Grinn i.MX6UL liteSOM/liteBoard
   - Toradex Colibri iMX6 module

  Other changes:

   - added peripherals on renesas, davinci, stm32f429, uniphier, sti,
     mediatek, integrator, at91, imx, vybrid, ls1021a, omap, qualcomm,
     mvebu, allwinner, broadcom, exynos, zynq

   - Continued fixes for W=1 dtc warnings

   - The old STiH415/416 SoC support gets removed, these never made it
     into products and have served their purpose in the kernel as a
     template for teh newer chips from ST

   - The exynos4415 dtsi file is removed as nothing uses it.

   - Intel PXA25x can now be booted using devicetree"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (422 commits)
  arm: dts: zynq: Add MicroZed board support
  ARM: dts: da850: enable high speed for mmc
  ARM: dts: da850: Add node for pullup/pulldown pinconf
  ARM: dts: da850: enable memctrl and mstpri nodes per board
  ARM: dts: da850-lcdk: Add ethernet0 alias to DT
  ARM: dts: artpec: add pcie support
  ARM: dts: add support for Turris Omnia
  devicetree: Add vendor prefix for CZ.NIC
  ARM: dts: berlin2q-marvell-dmp: fix typo in chosen node
  ARM: dts: berlin2q-marvell-dmp: fix regulators' name
  ARM: dts: Add xo to sdhc clock node on qcom platforms
  ARM: dts: r8a7794: Add device node for PRR
  ARM: dts: r8a7793: Add device node for PRR
  ARM: dts: r8a7792: Add device node for PRR
  ARM: dts: r8a7791: Add device node for PRR
  ARM: dts: r8a7790: Add device node for PRR
  ARM: dts: r8a7779: Add device node for PRR
  ARM: dts: r8a73a4: Add device node for PRR
  ARM: dts: sk-rzg1e: add Ether support
  ARM: dts: sk-rzg1e: initial device tree
  ...

Pull ARM SoC 64-bit updates from Arnd Bergmann:
 "Changes to platform code for 64-bit ARM platforms. We are not adding
  any new platforms that require code or Kconfig changes this time, so
  it's basically just defconfig changes to enable support for more
  drivers used on the existing platforms.

  This is mainly interesting for the Raspberry Pi 3, which should now
  work much better with the default build"

* tag 'armsoc-arm64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  arm64: defconfig: drop GPIO_SYSFS on multiplatforms
  arm64: defconfig: Do not lower CONFIG_LOG_BUF_SHIFT
  arm64: defconfig: allow rk3399-based boards to boot from mmc and usb
  arm64: defconfig: enable RK808 components
  arm64: defconfig: enable I2C and DW MMC controller on rockchip platform
  arm64: defconfig: Enable Tegra186 SoC
  ARM64: configs: Activate Internal PHY for Meson GXL
  arm64: qcom: enable GPIOLIB in Kconfig
  arm64: configs: enable configs for msm899(2/4) basic support
  ARM64: bcm2835: add thermal driver to default config
  ARM64: configs: Add Platform MHU in defconfig
  MAINTAINERS: Update Broadcom Vulcan maintainer email
  arm64: defconfig: enable EEPROM_AT25 config option
  arm64: Enable HIBERNATION in defconfig
  arm64: defconfig: Enable DRM DU and V4L2 FCP + VSP modules
  ARM64: defconfig: Enable MMC related configs
  arm64: Add BCM2835 (Raspberry Pi 3) support to the defconfig

Pull ARM SoC defconfig updates from Arnd Bergmann:
 "Defconfig additions, removals, etc. Most of these are small changes
  adding the options for newly upstreamed drivers, or drivers needed for
  new board support.

  Bartlomiej Zolnierkiewicz has done a series of patches reducing the
  use of CONFIG_IDE from 19 to 3 in favor of CONFIG_ATA.

  Overall more patches than usual, but nothing big"

* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (54 commits)
  ARM: davinci_all_defconfig: Enable da8xx usb otg
  ARM: defconfig: drop GPIO_SYSFS on multiplatforms
  ARM: multi_v7_defconfig: enable STMicroelectronics HVA driver
  ARM: configs: Add new config fragment to change RAM start point
  ARM: davinci_all_defconfig: Enable OHCI as module
  ARM: defconfig: turn on the DT cpufreq for Integrator
  ARM: omap2plus_defconfig: Run make savedefconfig to save some space
  ARM: davinci_all_defconfig: add missing options for systemd
  ARM: davinci_all_defconfig: enable the mstpri and ddrctl drivers
  ARM: bcm2835: add thermal driver to default config
  ARM: omap2plus_defconfig: Enable LP873X support
  ARM: omap2plus_defconfig: Enable REGULATOR_GPIO
  ARM: omap2plus_defconfig: Enable TOUCHSCREEN_TSC2004
  ARM: socfpga_defconfig: enable FS configs to support Angstrom filesystem
  ARM: config: Enable GPIO Key driver in stm32_defconfig
  ARM: tegra: Enable GMI driver in default configuration
  ARM: tegra: Enable SGTL5000 audio
  ARM: tegra: Update default configuration for v4.9-rc1
  ARM: socfpga: updates for socfpga_defconfig
  ARM: davinci_all_defconfig: enable LED default-on trigger
  ...

Pull ARM SoC platform updates from Arnd Bergmann:
 "These are updates for platform specific code on 32-bit ARM machines,
  essentially anything that can not (yet) be expressed using DT files.

  Noteworthy changes include:

   - Added support for the TI DRA71x family of SoCs in mach-omap2, this
     is an new variant of the the DRA72x/DRA74x automotive infotainment
     chips we already supported for a while.

   - Added support for the ST STM32F746 SoC, the first Cortex-M7 based
     microcontroller we support, related to the smaller STM32F4 family.

   - Renesas adds support for r8a7743 and r8a7745 in mach-shmobile, see
     http://elinux.org/RZ-G

   - SMP is now supported on the OX820 platform

   - A lot of code in mach-omap2 gets removed as a follow-up to removing
     support for board files in the previous release

   - Davinci has some new work to improve USB support

   - For i.MX, the performance monitor now supports profiling the memory
     controller using 'perf'"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (95 commits)
  ARM: davinci: da830-evm: use gpio descriptor for mmc pins
  ARM: davinci: da850-evm: use gpio descriptor for mmc pins
  ARM: davinci: hawk: use gpio descriptor for mmc pins
  ARM: ARTPEC-6: add select MFD_SYSCON to MACH_ARTPEC6
  ARM: davinci: da8xx: Fix ohci device name
  ARM: oxnas: Add OX820 config and makefile entry
  ARM: oxnas: Add OX820 SMP support
  ARM: davinci: PM: fix build when da850 not compiled in
  ARM: orion5x: remove legacy support of ls-chl
  ARM: integrator: drop EBI access use syscon
  ARM: BCM5301X: Add back handler ignoring external imprecise aborts
  ARM: davinci: PM: support da8xx DT platforms
  ARM: davinci: PM: cleanup: remove references to pdata
  ARM: davinci: PM: rework init, remove platform device
  ARM: Kconfig: Introduce MACH_STM32F746 flag
  ARM: mach-stm32: Add a new SOC - STM32F746
  ARM: shmobile: document SK-RZG1E board
  ARM: shmobile: r8a7745: basic SoC support
  ARM: imx: mach-imx6ul: add imx6ull support
  ARM: zynq: Reserve correct amount of non-DMA RAM
  ...

Pull ARM SoC non-urgent fixes from Arnd Bergmann:
 "As usual, we queue up a few fixes that don't seem urgent enough to go
  in through -rc, or that just came a little too late given their size.

  The zx fixes make the platform finally boot on real hardware, the
  davinci and imx31 get the DT support working better for some of the
  machines that are still normally used with classic board files. One
  tegra fix is important for new bootloader versions, but the bug has
  been around for a while without anyone noticing.

  The other changes are mostly cosmetic"

* tag 'armsoc-fixes-nc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (22 commits)
  arm64: tegra: Add missing Smaug revision
  arm64: tegra: Add VDD_GPU regulator to Jetson TX1
  arm64: dts: zte: clean up gic-v3 redistributor properties
  arm64: dts: zx: Fix gic GICR property
  bus: vexpress-config: fix device reference leak
  soc: ti: qmss: fix the case when !SMP
  ARM: lpc32xx: drop duplicate header device.h
  ARM: ixp4xx: drop duplicate header gpio.h
  ARM: socfpga: fix spelling mistake in error message
  ARM: dts: imx6q-cm-fx6: fix fec pinctrl
  ARM: dts: imx7d-pinfunc: fix UART pinmux defines
  ARM: dts: imx6qp: correct LDB clock inputs
  ARM: OMAP2+: pm-debug: Use seq_putc() in two functions
  ARM: OMAP2+: Remove the omapdss_early_init_of() function
  mfd: tps65217: Fix mismatched interrupt number
  ARM: zx: Fix error handling
  ARM: spear: Fix error handling
  ARM: davinci: da850: Fix pwm name matching
  ARM: clk: imx31: properly init clocks for machines with DT
  clk: imx31: fix rewritten input argument of mx31_clocks_init()
  ...

Merge tag 'linux-kselftest-4.10-rc1-update' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kselftest updates from Shuah Khan:
 "This update consists of:

   - new tests to exercise the Sync Kernel Infrastructure. These tests
     are part of a battery of Android libsync tests and are re-written
     to test the new sync user-space interfaces from Emilio López, and
     Gustavo Padovan.

   - test to run hw-independent mock tests for i915.ko from Chris Wilson

   - a new gpio test case from Bamvor Jian Zhang

   - missing gitignore additions"

* tag 'linux-kselftest-4.10-rc1-update' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftest/gpio: add gpio test case
  selftest: sync: improve assert() failure message
  kselftests: Exercise hw-independent mock tests for i915.ko
  selftests: add missing gitignore files/dirs
  selftests: add missing set-tz to timers .gitignore
  selftest: sync: stress test for merges
  selftest: sync: stress consumer/producer test
  selftest: sync: stress test for parallelism
  selftest: sync: wait tests for sw_sync framework
  selftest: sync: merge tests for sw_sync framework
  selftest: sync: fence tests for sw_sync framework
  selftest: sync: basic tests for sw_sync framework

Pull ARC updates from Vineet Gupta:
 "These are mostly timer/clocksource driver updates which were
  Reviewed/Acked by Daniel but had to be merged via ARC tree due to
  dependencies.

  I will follow up with another pull request with actual ARC changes
  early next week !

  Summary:

   - Moving ARC timer driver into drivers/clocksource

   - EZChip timer driver updates [Noam]

   - ARC AXS103 and HAPS platform updates [Alexey]"

* tag 'arc-4.10-rc1-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARC: axs10x: really enable ARC PGU
  ARC: rename Zebu platform support to HAPS
  clocksource: nps: avoid maybe-uninitialized warning
  clocksource: Add clockevent support to NPS400 driver
  clocksource: update "fn" at CLOCKSOURCE_OF_DECLARE() of nps400 timer
  soc: Support for NPS HW scheduling
  clocksource: import ARC timer driver
  ARC: breakout timer include code into separate header ...
  ARC: move mcip.h into include/soc and adjust the includes
  ARC: breakout aux handling into a separate header
  ARC: time: move time_init() out of the driver
  ARC: timer: gfrc, rtc: build under same option (64-bit timers)
  ARC: timer: gfrc, rtc: Read BCR to detect whether hardware exists ...
  ARC: timer: gfrc, rtc: deuglify big endian code

That's the default now, no need for makefiles to set it.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Kalle Valo <kvalo@codeaurora.org>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>

No need for it anymore: __bitwise checks are now
on by default for everyone.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

It's no longer used.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

__bitwise__ used to mean "yes, please enable sparse checks
unconditionally", but now that we dropped __CHECK_ENDIAN__
__bitwise is exactly the same.
There aren't many users, replace it by __bitwise everywhere.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Stefan Schmidt <stefan@osg.samsung.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Akced-by: Lee Duncan <lduncan@suse.com>

__bitwise__ is an implementation detail now.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

We dropped __CHECK_ENDIAN__ so __bitwise__ is now an implementation
detail. People should use __bitwise everywhere.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

We dropped need for __CHECK_ENDIAN__ for linux,
this mirrors this for tools.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

By now, linux is mostly endian-clean. Enabling endian-ness
checks for everyone produces about 200 new sparse warnings for me -
less than 10% over the 2000 sparse warnings already there.

Not a big deal, OTOH enabling this helps people notice
they are introducing new bugs.

So let's just drop __CHECK_ENDIAN__. Follow-up patches
can drop distinction between __bitwise and __bitwise__.

Cc: Linus Torvalds <torvalds@linux-foundation.org>
Suggested-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

Fix a warning thrown from virtio_mmio_remove():
Device 'virtio0' does not have a release() function

The fix is according to virtio_pci_probe() of
drivers/virtio/virtio_pci_common.c
Signed-off-by: Yuan Liu <liuyuan@google.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

The device (not the driver) populates the used ring and includes the len
of how much data was written.
Signed-off-by: Felipe Franciosi <felipe@nutanix.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

Remove the unused but set variable se_tpg in vhost_scsi_nexus_cb() to
fix the following GCC warning when building with 'W=1':

  drivers/vhost/scsi.c:1752:26: warning: variable ‘se_tpg’ set but not used
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

As a step towards killing off ACCESS_ONCE, use {READ,WRITE}_ONCE() for the
virtio tools uaccess primitives, pulling these in from <linux/compiler.h>.

With this done, we can kill off the now-unused ACCESS_ONCE() definition.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: linux-kernel@vger.kernel.org
Cc: virtualization@lists.linux-foundation.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>

Despite living under drivers/ vringh.c is also used as part of the userspace
virtio tools. Before we can kill off the ACCESS_ONCE()definition in the tools,
we must convert vringh.c to use {READ,WRITE}_ONCE().

This patch does so, along with the required include of <linux/compiler.h> for
the relevant definitions. The userspace tools provide their own definitions in
their own <linux/compiler.h>.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: kvm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: virtualization@lists.linux-foundation.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>

The virtio tools implementation of READ_ONCE() has a single parameter called
'var', but erroneously refers to 'val' for its cast, and thus won't work unless
there's a variable of the correct type that happens to be called 'var'.

Fix this with s/var/val/, making READ_ONCE() work as expected regardless.

Fixes: a7c49033 ("tools/virtio: use virt_xxx barriers")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: linux-kernel@vger.kernel.org
Cc: virtualization@lists.linux-foundation.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>

This patch introduces virtio-crypto driver for Linux Kernel.

The virtio crypto device is a virtual cryptography device
as well as a kind of virtual hardware accelerator for
virtual machines. The encryption anddecryption requests
are placed in the data queue and are ultimately handled by
thebackend crypto accelerators. The second queue is the
control queue used to create or destroy sessions for
symmetric algorithms and will control some advanced features
in the future. The virtio crypto device provides the following
cryptoservices: CIPHER, MAC, HASH, and AEAD.

For more information about virtio-crypto device, please see:
  http://qemu-project.org/Features/VirtioCrypto

CC: Michael S. Tsirkin <mst@redhat.com>
CC: Cornelia Huck <cornelia.huck@de.ibm.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Herbert Xu <herbert@gondor.apana.org.au>
CC: Halil Pasic <pasic@linux.vnet.ibm.com>
CC: David S. Miller <davem@davemloft.net>
CC: Zeng Xin <xin.zeng@intel.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

When event index was enabled, we need to fetch used event from
userspace memory each time. This userspace fetch (with memory
barrier) could be saved sometime when 1) caching used event and 2)
if used event is ahead of new and old to new updating does not cross
it, we're sure there's no need to notify guest.

This will be useful for heavy tx load e.g guest pktgen test with Linux
driver shows ~3.5% improvement.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

Multi vsocks may setup the same cid at the same time.
Signed-off-by: Gao feng <omarapazanadi@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>

There is basically no shared logic between the INTx and MSI-X case in
vp_try_to_find_vqs, so split the function into two and clean them up
a little bit.

Also remove the fairly pointless vp_request_intx wrapper while we're at it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

vp_request_msix_vectors is only called by vp_try_to_find_vqs, which already
calls vp_free_vectors through vp_del_vqs in the failure case.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>