- 26 Oct, 2013 15 commits
-
-
Steffen Klassert authored
[ Upstream commit 5faa5df1 ] We initialize the routing metrics with the values cached on the inetpeer in rt_init_metrics(). So if we have the metrics cached on the inetpeer, we ignore the user configured fib_metrics. To fix this issue, we replace the old tree with a fresh initialized inet_peer_base. The old tree is removed later with a delayed work queue. Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Ben Hutchings <ben@decadent.org.uk>
-
Ying Xue authored
[ Upstream commit 4225a398 ] When the lockdep validator is enabled, it will report the below warning when we enable a TIPC bearer: [ INFO: possible irq lock inversion dependency detected ] --------------------------------------------------------- Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(ptype_lock); local_irq_disable(); lock(tipc_net_lock); lock(ptype_lock); <Interrupt> lock(tipc_net_lock); *** DEADLOCK *** the shortest dependencies between 2nd lock and 1st lock: -> (ptype_lock){+.+...} ops: 10 { [...] SOFTIRQ-ON-W at: [<c1089418>] __lock_acquire+0x528/0x13e0 [<c108a360>] lock_acquire+0x90/0x100 [<c1553c38>] _raw_spin_lock+0x38/0x50 [<c14651ca>] dev_add_pack+0x3a/0x60 [<c182da75>] arp_init+0x1a/0x48 [<c182dce5>] inet_init+0x181/0x27e [<c1001114>] do_one_initcall+0x34/0x170 [<c17f7329>] kernel_init+0x110/0x1b2 [<c155b6a2>] kernel_thread_helper+0x6/0x10 [...] ... key at: [<c17e4b10>] ptype_lock+0x10/0x20 ... acquired at: [<c108a360>] lock_acquire+0x90/0x100 [<c1553c38>] _raw_spin_lock+0x38/0x50 [<c14651ca>] dev_add_pack+0x3a/0x60 [<c8bc18d2>] enable_bearer+0xf2/0x140 [tipc] [<c8bb283a>] tipc_enable_bearer+0x1ba/0x450 [tipc] [<c8bb3a04>] tipc_cfg_do_cmd+0x5c4/0x830 [tipc] [<c8bbc032>] handle_cmd+0x42/0xd0 [tipc] [<c148e802>] genl_rcv_msg+0x232/0x280 [<c148d3f6>] netlink_rcv_skb+0x86/0xb0 [<c148e5bc>] genl_rcv+0x1c/0x30 [<c148d144>] netlink_unicast+0x174/0x1f0 [<c148ddab>] netlink_sendmsg+0x1eb/0x2d0 [<c1456bc1>] sock_aio_write+0x161/0x170 [<c1135a7c>] do_sync_write+0xac/0xf0 [<c11360f6>] vfs_write+0x156/0x170 [<c11361e2>] sys_write+0x42/0x70 [<c155b0df>] sysenter_do_call+0x12/0x38 [...] } -> (tipc_net_lock){+..-..} ops: 4 { [...] IN-SOFTIRQ-R at: [<c108953a>] __lock_acquire+0x64a/0x13e0 [<c108a360>] lock_acquire+0x90/0x100 [<c15541cd>] _raw_read_lock_bh+0x3d/0x50 [<c8bb874d>] tipc_recv_msg+0x1d/0x830 [tipc] [<c8bc195f>] recv_msg+0x3f/0x50 [tipc] [<c146a5fa>] __netif_receive_skb+0x22a/0x590 [<c146ab0b>] netif_receive_skb+0x2b/0xf0 [<c13c43d2>] pcnet32_poll+0x292/0x780 [<c146b00a>] net_rx_action+0xfa/0x1e0 [<c103a4be>] __do_softirq+0xae/0x1e0 [...] } >From the log, we can see three different call chains between CPU0 and CPU1: Time 0 on CPU0: kernel_init()->inet_init()->dev_add_pack() At time 0, the ptype_lock is held by CPU0 in dev_add_pack(); Time 1 on CPU1: tipc_enable_bearer()->enable_bearer()->dev_add_pack() At time 1, tipc_enable_bearer() first holds tipc_net_lock, and then wants to take ptype_lock to register TIPC protocol handler into the networking stack. But the ptype_lock has been taken by dev_add_pack() on CPU0, so at this time the dev_add_pack() running on CPU1 has to be busy looping. Time 2 on CPU0: netif_receive_skb()->recv_msg()->tipc_recv_msg() At time 2, an incoming TIPC packet arrives at CPU0, hence tipc_recv_msg() will be invoked. In tipc_recv_msg(), it first wants to hold tipc_net_lock. At the moment, below scenario happens: On CPU0, below is our sequence of taking locks: lock(ptype_lock)->lock(tipc_net_lock) On CPU1, our sequence of taking locks looks like: lock(tipc_net_lock)->lock(ptype_lock) Obviously deadlock may happen in this case. But please note the deadlock possibly doesn't occur at all when the first TIPC bearer is enabled. Before enable_bearer() -- running on CPU1 does not hold ptype_lock, so the TIPC receive handler (i.e. recv_msg()) is not registered successfully via dev_add_pack(), so the tipc_recv_msg() cannot be called by recv_msg() even if a TIPC message comes to CPU0. But when the second TIPC bearer is registered, the deadlock can perhaps really happen. To fix it, we will push the work of registering TIPC protocol handler into workqueue context. After the change, both paths taking ptype_lock are always in process contexts, thus, the deadlock should never occur. Signed-off-by:
Ying Xue <ying.xue@windriver.com> Signed-off-by:
Jon Maloy <jon.maloy@ericsson.com> Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by:
-
Jiri Bohac authored
[ Upstream commit 61e76b17 ] RFC 4443 has defined two additional codes for ICMPv6 type 1 (destination unreachable) messages: 5 - Source address failed ingress/egress policy 6 - Reject route to destination Now they are treated as protocol error and icmpv6_err_convert() converts them to EPROTO. RFC 4443 says: "Codes 5 and 6 are more informative subsets of code 1." Treat codes 5 and 6 as code 1 (EACCES) Btw, connect() returning -EPROTO confuses firefox, so that fallback to other/IPv4 addresses does not work: https://bugzilla.mozilla.org/show_bug.cgi?id=910773Signed-off-by:
Jiri Bohac <jbohac@suse.cz> Acked-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
-
Daniel Borkmann authored
[ Upstream commit 2d98c29b ] While looking into MLDv1/v2 code, I noticed that bridging code does not convert it's max delay into jiffies for MLDv2 messages as we do in core IPv6' multicast code. RFC3810, 5.1.3. Maximum Response Code says: The Maximum Response Code field specifies the maximum time allowed before sending a responding Report. The actual time allowed, called the Maximum Response Delay, is represented in units of milliseconds, and is derived from the Maximum Response Code as follows: [...] As we update timers that work with jiffies, we need to convert it. Signed-off-by:
Daniel Borkmann <dborkman@redhat.com> Cc: Linus Lüssing <linus.luessing@web.de> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
-
Thomas Graf authored
[ Upstream commit 25a6e6b8 ] Allocating skbs when sending out neighbour discovery messages currently uses sock_alloc_send_skb() based on a per net namespace socket and thus share a socket wmem buffer space. If a netdevice is temporarily unable to transmit due to carrier loss or for other reasons, the queued up ndisc messages will cosnume all of the wmem space and will thus prevent from any more skbs to be allocated even for netdevices that are able to transmit packets. The number of neighbour discovery messages sent is very limited, use of alloc_skb() bypasses the socket wmem buffer size enforcement while the manual call to skb_set_owner_w() maintains the socket reference needed for the IPv6 output path. This patch has orginally been posted by Eric Dumazet in a modified form. Signed-off-by:
Thomas Graf <tgraf@suug.ch> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Fabio Estevam <festevam@gmail.com> Tested-by:
Fabio Estevam <fabio.estevam@freescale.com> Tested-by:
Stephen Warren <swarren@nvidia.com> Acked-by:
-
Hannes Frederic Sowa authored
[ Upstream commit f46078cf ] It is not allowed for an ipv6 packet to contain multiple fragmentation headers. So discard packets which were already reassembled by fragmentation logic and send back a parameter problem icmp. The updates for RFC 6980 will come in later, I have to do a bit more research here. Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by:
-
Hannes Frederic Sowa authored
[ Upstream commit 4b08a8f1 ] Because of the max_addresses check attackers were able to disable privacy extensions on an interface by creating enough autoconfigured addresses: <http://seclists.org/oss-sec/2012/q4/292> But the check is not actually needed: max_addresses protects the kernel to install too many ipv6 addresses on an interface and guards addrconf_prefix_rcv to install further addresses as soon as this limit is reached. We only generate temporary addresses in direct response of a new address showing up. As soon as we filled up the maximum number of addresses of an interface, we stop installing more addresses and thus also stop generating more temp addresses. Even if the attacker tries to generate a lot of temporary addresses by announcing a prefix and removing it again (lifetime == 0) we won't install more temp addresses, because the temporary addresses do count to the maximum number of addresses, thus we would stop installing new autoconfigured addresses when the limit is reached. This patch fixes CVE-2013-0343 (but other layer-2 attacks are still possible). Thanks to Ding Tianhong to bring this topic up again. Cc: Ding Tianhong <dingtianhong@huawei.com> Cc: George Kargiotakis <kargig@void.gr> Cc: P J P <ppandit@redhat.com> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by:
Ding Tianhong <dingtianhong@huawei.com> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit 15718ea0 ] The recent fix d9bf5f13 "tun: compare with 0 instead of total_len" is not totally correct. Because "len" and "sizeof()" are size_t type, that means they are never less than zero. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Michael S. Tsirkin <mst@redhat.com> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
-
Neil Horman authored
[ Upstream commits cf3c4c03 and d06f5187 (the latter is a fixup from Dave Jones) ] Self explanitory dma_mapping_error addition to the 8139 driver, based on this: https://bugzilla.redhat.com/show_bug.cgi?id=947250 It showed several backtraces arising for dma_map_* usage without checking the return code on the mapping. Add the check and abort the rx/tx operation if its failed. Untested as I have no hardware and the reporter has wandered off, but seems pretty straightforward. Signed-off-by:
-
Hannes Frederic Sowa authored
[ Upstream commit 3e3be275 ] In case a subtree did not match we currently stop backtracking and return NULL (root table from fib_lookup). This could yield in invalid routing table lookups when using subtrees. Instead continue to backtrack until a valid subtree or node is found and return this match. Also remove unneeded NULL check. Reported-by:
Teco Boot <teco@inf-net.nl> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Cc: David Lamparter <equinox@diac24.net> Cc: <boutier@pps.univ-paris-diderot.fr> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit cd6b423a ] While investigating about strange increase of retransmit rates on hosts ~24 days after boot, Van found hystart was disabled if ca->epoch_start was 0, as following condition is true when tcp_time_stamp high order bit is set. (s32)(tcp_time_stamp - ca->epoch_start) < HZ Quoting Van : At initialization & after every loss ca->epoch_start is set to zero so I believe that the above line will turn off hystart as soon as the 2^31 bit is set in tcp_time_stamp & hystart will stay off for 24 days. I think we've observed that cubic's restart is too aggressive without hystart so this might account for the higher drop rate we observe. Diagnosed-by:
Van Jacobson <vanj@google.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Yuchung Cheng <ycheng@google.com> Acked-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 2ed0edf9 ] commit 17a6e9f1 ("tcp_cubic: fix clock dependency") added an overflow error in bictcp_update() in following code : /* change the unit from HZ to bictcp_HZ */ t = ((tcp_time_stamp + msecs_to_jiffies(ca->delay_min>>3) - ca->epoch_start) << BICTCP_HZ) / HZ; Because msecs_to_jiffies() being unsigned long, compiler does implicit type promotion. We really want to constrain (tcp_time_stamp - ca->epoch_start) to a signed 32bit value, or else 't' has unexpected high values. This bugs triggers an increase of retransmit rates ~24 days after boot [1], as the high order bit of tcp_time_stamp flips. [1] for hosts with HZ=1000 Big thanks to Van Jacobson for spotting this problem. Diagnosed-by:
-
Eric Dumazet authored
[ Upstream commit aab515d7 ] AddressSanitizer [1] dynamic checker pointed a potential out of bound access in leaf_walk_rcu() We could allocate one more slot in tnode_new() to leave the prefetch() in-place but it looks not worth the pain. Bug added in commit 82cfbb00 ("[IPV4] fib_trie: iterator recode") [1] : https://code.google.com/p/address-sanitizer/wiki/AddressSanitizerForKernelReported-by:
Andrey Konovalov <andreyknvl@google.com> Signed-off-by:
-
Roman Gushchin authored
[ Upstream commit 5f671d6b ] It's possible to assign an invalid value to the net.core.somaxconn sysctl variable, because there is no checks at all. The sk_max_ack_backlog field of the sock structure is defined as unsigned short. Therefore, the backlog argument in inet_listen() shouldn't exceed USHRT_MAX. The backlog argument in the listen() syscall is truncated to the somaxconn value. So, the somaxconn value shouldn't exceed 65535 (USHRT_MAX). Also, negative values of somaxconn are meaningless. before: $ sysctl -w net.core.somaxconn=256 net.core.somaxconn = 256 $ sysctl -w net.core.somaxconn=65536 net.core.somaxconn = 65536 $ sysctl -w net.core.somaxconn=-100 net.core.somaxconn = -100 after: $ sysctl -w net.core.somaxconn=256 net.core.somaxconn = 256 $ sysctl -w net.core.somaxconn=65536 error: "Invalid argument" setting key "net.core.somaxconn" $ sysctl -w net.core.somaxconn=-100 error: "Invalid argument" setting key "net.core.somaxconn" Based on a prior patch from Changli Gao. Signed-off-by:
Roman Gushchin <klamm@yandex-team.ru> Reported-by:
Changli Gao <xiaosuo@gmail.com> Suggested-by:
-
stephen hemminger authored
[ Upstream commit cbd37556 ] When userspace passes a large priority value the assignment of the unsigned value hopt->prio to signed int cl->prio causes cl->prio to become negative and the comparison is with TC_HTB_NUMPRIO is always false. The result is that HTB crashes by referencing outside the array when processing packets. With this patch the large value wraps around like other values outside the normal range. See: https://bugzilla.kernel.org/show_bug.cgi?id=60669Signed-off-by:
Stephen Hemminger <stephen@networkplumber.org> Acked-by:
-
- 10 Sep, 2013 25 commits
-
-
Ben Hutchings authored
-
David Vrabel authored
commit 3bc38cbc upstream. If there are UNUSABLE regions in the machine memory map, dom0 will attempt to map them 1:1 which is not permitted by Xen and the kernel will crash. There isn't anything interesting in the UNUSABLE region that the dom0 kernel needs access to so we can avoid making the 1:1 mapping and treat it as RAM. We only do this for dom0, as that is where tboot case shows up. A PV domU could have an UNUSABLE region in its pseudo-physical map and would need to be handled in another patch. This fixes a boot failure on hosts with tboot. tboot marks a region in the e820 map as unusable and the dom0 kernel would attempt to map this region and Xen does not permit unusable regions to be mapped by guests. (XEN) 0000000000000000 - 0000000000060000 (usable) (XEN) 0000000000060000 - 0000000000068000 (reserved) (XEN) 0000000000068000 - 000000000009e000 (usable) (XEN) 0000000000100000 - 0000000000800000 (usable) (XEN) 0000000000800000 - 0000000000972000 (unusable) tboot marked this region as unusable. (XEN) 0000000000972000 - 00000000cf200000 (usable) (XEN) 00000000cf200000 - 00000000cf38f000 (reserved) (XEN) 00000000cf38f000 - 00000000cf3ce000 (ACPI data) (XEN) 00000000cf3ce000 - 00000000d0000000 (reserved) (XEN) 00000000e0000000 - 00000000f0000000 (reserved) (XEN) 00000000fe000000 - 0000000100000000 (reserved) (XEN) 0000000100000000 - 0000000630000000 (usable) Signed-off-by:
David Vrabel <david.vrabel@citrix.com> [v1: Altered the patch and description with domU's with UNUSABLE regions] Signed-off-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by:
-
Dominik Dingel authored
commit 2b29a9fd upstream. Any uaccess between guest_enter and guest_exit could trigger a page fault, the page fault handler would handle it as a guest fault and translate a user address as guest address. Signed-off-by:
Dominik Dingel <dingel@linux.vnet.ibm.com> Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> [bwh: Backported to 3.2: adjust context and add the rc variable] Signed-off-by:
-
Nicholas Bellinger authored
commit ee60bddb upstream. This patch fixes spc_emulate_inquiry_std() to add trailing ASCII spaces for INQUIRY vendor + model fields following SPC-4 text: "ASCII data fields described as being left-aligned shall have any unused bytes at the end of the field (i.e., highest offset) and the unused bytes shall be filled with ASCII space characters (20h)." This addresses a problem with Falconstor NSS multipathing. Reported-by:
Tomas Molota <tomas.molota@lightstorm.sk> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org> [bwh: Backported to 3.2, based on Nicholas's versions for 3.0 and 3.4] Signed-off-by:
-
Takashi Iwai authored
commit fb615499 upstream. The recent commit to delay the release of kobject triggered NULL dereferences of opti9xx drivers. The cause is that all snd-opti92x-ad1848, snd-opti92x-cs4231 and snd-opti93x drivers register the PnP card driver with the very same name, and also snd-opti92x-ad1848 and -cs4231 drivers register the ISA driver with the same name, too. When these drivers are built in, quick "register-release-and-re-register" actions occur, and this results in Oops because of the same name is assigned to the kobject. The fix is simply to assign individual names. As a bonus, by using KBUILD_MODNAME, the patch reduces more lines than it adds. The fix is based on the suggestion by Russell King. Reported-and-tested-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
David S. Miller authored
commit 74c7b289 upstream. Otherwise if no references exist in the static kernel image, we won't export the symbol properly to modules. Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Sam Ravnborg authored
commit de36e66d upstream. Based on copy from microblaze add ucmpdi2 implementation. This fixes build of niu driver which failed with: drivers/built-in.o: In function `niu_get_nfc': niu.c:(.text+0x91494): undefined reference to `__ucmpdi2' This driver will never be used on a sparc32 system, but patch added to fix build breakage with all*config builds. Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
-
Michal Simek authored
commit 8cf662ed upstream. Old Microblaze toolchain supported "b" contstrains for all register but it always points to general purpose reg. New Microblaze toolchain is more strict in this and general purpose register should be used there "r". Signed-off-by:
Michal Simek <monstr@monstr.eu> Signed-off-by:
-
Geert Uytterhoeven authored
commit 9a75c6e5 upstream. Fix the m32r compile error: arch/m32r/boot/compressed/misc.c:31:14: error: static declaration of 'memset' follows non-static declaration make[5]: *** [arch/m32r/boot/compressed/misc.o] Error 1 make[4]: *** [arch/m32r/boot/compressed/vmlinux] Error 2 by removing the static keyword. Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Cc: Hirokazu Takata <takata@linux-m32r.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Geert Uytterhoeven authored
commit a8abbca6 upstream. Fix the m32r link error: LD arch/m32r/boot/compressed/vmlinux arch/m32r/boot/compressed/misc.o: In function `zlib_updatewindow': misc.c:(.text+0x190): undefined reference to `memcpy' misc.c:(.text+0x190): relocation truncated to fit: R_M32R_26_PLTREL against undefined symbol `memcpy' make[5]: *** [arch/m32r/boot/compressed/vmlinux] Error 1 by adding our own implementation of memcpy(). Signed-off-by:
-
Geert Uytterhoeven authored
commit df12aef6 upstream. Commit a556bec9 ("m32r: fix arch/m32r/boot/compressed/Makefile") changed "$(suffix_y)" to "$(suffix-y)", but didn't update any location where "suffix_y" is set, causing: make[5]: *** No rule to make target `arch/m32r/boot/compressed/vmlinux.bin.', needed by `arch/m32r/boot/compressed/piggy.o'. Stop. make[4]: *** [arch/m32r/boot/compressed/vmlinux] Error 2 make[3]: *** [zImage] Error 2 Correct the other locations to fix this. Signed-off-by:
-
Paul Gortmaker authored
commit cd0a2bfb upstream. Otherwise we get this link failure for frv's defconfig: LD .tmp_vmlinux1 drivers/built-in.o: In function `pci_assign_resource': (.text+0xbf0c): undefined reference to `pci_cardbus_resource_alignment' drivers/built-in.o: In function `pci_setup': pci.c:(.init.text+0x174): undefined reference to `pci_realloc_get_opt' pci.c:(.init.text+0x1a0): undefined reference to `pci_realloc_get_opt' make[1]: *** [.tmp_vmlinux1] Error 1 Cc: David Howells <dhowells@redhat.com> Acked-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
-
Radu Caragea authored
commit 41aacc1e upstream. This is the updated version of df54d6fa ("x86 get_unmapped_area(): use proper mmap base for bottom-up direction") that only randomizes the mmap base address once. Signed-off-by:
Radu Caragea <sinaelgl@gmail.com> Reported-and-tested-by:
Jeff Shorey <shoreyjeff@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Michel Lespinasse <walken@google.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Adrian Sendroiu <molecula2788@gmail.com> Cc: Greg KH <greg@kroah.com> Cc: Kamal Mostafa <kamal@canonical.com> Signed-off-by:
-
Jakob Bornecrantz authored
commit 6e4dcff3 upstream. This fixes the piglit test texturing/max-texture-size causing the VM to die due to a too large SVGA command. Signed-off-by:
Jakob Bornecrantz <jakob@vmware.com> Reviewed-by:
Biran Paul <brianp@vmware.com> Reviewed-by:
Zack Rusin <zackr@vmware.com> Signed-off-by:
Dave Airlie <airlied@gmail.com> Signed-off-by:
-
Imre Deak authored
commit 77fa4cbd upstream. Fix the typo introduced in commit 1a2eb460 Author: Keith Packard <keithp@keithp.com> Date: Wed Nov 16 16:26:07 2011 -0800 drm/i915: Hook up Ivybridge eDP This fixes eDP link-training failures and cases where all voltage swing /pre-emphasis levels were tried and failed during clock recovery and - as a fallback - we go on to do channel equalization with the last voltage swing/pre-emphasis level which will succeed. Both issues can lead to a blank screen. v2: - improve commit message Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=64880Tested-by:
Jeremy Moles <cubicool@gmail.com> Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Tejun Heo authored
commit b22ce278 upstream. If !PREEMPT, a kworker running work items back to back can hog CPU. This becomes dangerous when a self-requeueing work item which is waiting for something to happen races against stop_machine. Such self-requeueing work item would requeue itself indefinitely hogging the kworker and CPU it's running on while stop_machine would wait for that CPU to enter stop_machine while preventing anything else from happening on all other CPUs. The two would deadlock. Jamie Liu reports that this deadlock scenario exists around scsi_requeue_run_queue() and libata port multiplier support, where one port may exclude command processing from other ports. With the right timing, scsi_requeue_run_queue() can end up requeueing itself trying to execute an IO which is asked to be retried while another device has an exclusive access, which in turn can't make forward progress due to stop_machine. Fix it by invoking cond_resched() after executing each work item. Signed-off-by:
Tejun Heo <tj@kernel.org> Reported-by:
Jamie Liu <jamieliu@google.com> References: http://thread.gmane.org/gmane.linux.kernel/1552567 [bwh: Backported to 3.2: adjust context] Signed-off-by:
-
Russ Anderson authored
commit 21ea9f5a upstream. "cat /sys/devices/system/memory/memory*/removable" crashed the system. The problem is that show_mem_removable() is passing a bad pfn to is_mem_section_removable(), which causes if (!node_online(page_to_nid(page))) to blow up. Why is it passing in a bad pfn? The reason is that show_mem_removable() will loop sections_per_block times. sections_per_block is 16, but mem->section_count is 8, indicating holes in this memory block. Checking that the memory section is present before checking to see if the memory section is removable fixes the problem. harp5-sys:~ # cat /sys/devices/system/memory/memory*/removable 0 1 1 1 1 1 1 1 1 1 1 1 1 1 BUG: unable to handle kernel paging request at ffffea00c3200000 IP: [<ffffffff81117ed1>] is_pageblock_removable_nolock+0x1/0x90 PGD 83ffd4067 PUD 37bdfce067 PMD 0 Oops: 0000 [#1] SMP Modules linked in: autofs4 binfmt_misc rdma_ucm rdma_cm iw_cm ib_addr ib_srp scsi_transport_srp scsi_tgt ib_ipoib ib_cm ib_uverbs ib_umad iw_cxgb3 cxgb3 mdio mlx4_en mlx4_ib ib_sa mlx4_core ib_mthca ib_mad ib_core fuse nls_iso8859_1 nls_cp437 vfat fat joydev loop hid_generic usbhid hid hwperf(O) numatools(O) dm_mod iTCO_wdt ipv6 iTCO_vendor_support igb i2c_i801 ioatdma i2c_algo_bit ehci_pci pcspkr lpc_ich i2c_core ehci_hcd ptp sg mfd_core dca rtc_cmos pps_core mperf button xhci_hcd sd_mod crc_t10dif usbcore usb_common scsi_dh_emc scsi_dh_hp_sw scsi_dh_alua scsi_dh_rdac scsi_dh gru(O) xvma(O) xfs crc32c libcrc32c thermal sata_nv processor piix mptsas mptscsih scsi_transport_sas mptbase megaraid_sas fan thermal_sys hwmon ext3 jbd ata_piix ahci libahci libata scsi_mod CPU: 4 PID: 5991 Comm: cat Tainted: G O 3.11.0-rc5-rja-uv+ #10 Hardware name: SGI UV2000/ROMLEY, BIOS SGI UV 2000/3000 series BIOS 01/15/2013 task: ffff88081f034580 ti: ffff880820022000 task.ti: ffff880820022000 RIP: 0010:[<ffffffff81117ed1>] [<ffffffff81117ed1>] is_pageblock_removable_nolock+0x1/0x90 RSP: 0018:ffff880820023df8 EFLAGS: 00010287 RAX: 0000000000040000 RBX: ffffea00c3200000 RCX: 0000000000000004 RDX: ffffea00c30b0000 RSI: 00000000001c0000 RDI: ffffea00c3200000 RBP: ffff880820023e38 R08: 0000000000000000 R09: 0000000000000001 R10: 0000000000000000 R11: 0000000000000001 R12: ffffea00c33c0000 R13: 0000160000000000 R14: 6db6db6db6db6db7 R15: 0000000000000001 FS: 00007ffff7fb2700(0000) GS:ffff88083fc80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffea00c3200000 CR3: 000000081b954000 CR4: 00000000000407e0 Call Trace: show_mem_removable+0x41/0x70 dev_attr_show+0x2a/0x60 sysfs_read_file+0xf7/0x1c0 vfs_read+0xc8/0x130 SyS_read+0x5d/0xa0 system_call_fastpath+0x16/0x1b Signed-off-by:
Russ Anderson <rja@sgi.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Cc: Yinghai Lu <yinghai@kernel.org> Reviewed-by:
Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Signed-off-by:
-
Trond Myklebust authored
commit 347e2233 upstream. Some architectures, such as ARM-32 do not return the same base address when you call kmap_atomic() twice on the same page. This causes problems for the memmove() call in the XDR helper routine "_shift_data_right_pages()", since it defeats the detection of overlapping memory ranges, and has been seen to corrupt memory. The fix is to distinguish between the case where we're doing an inter-page copy or not. In the former case of we know that the memory ranges cannot possibly overlap, so we can additionally micro-optimise by replacing memmove() with memcpy(). Reported-by:
Mark Young <MYoung@nvidia.com> Reported-by:
Matt Craighead <mcraighead@nvidia.com> Cc: Bruce Fields <bfields@fieldses.org> Signed-off-by:
Trond Myklebust <Trond.Myklebust@netapp.com> Tested-by:
-
Cong Wang authored
commit b8541786 upstream. Signed-off-by:
Cong Wang <amwang@redhat.com> [bwh: Cherry-picked for 3.2 to let the next fix apply cleanly] Signed-off-by:
-
Eugene Surovegin authored
commit d220980b upstream. This solves a problem observed in kexec'ed kernel where 200ms timeout is too short and bootconsole fails to initialize. Console did eventually become workable but much later into the boot process. Observed timeout was around 260ms, but I decided to make it a little bigger for more reliability. This has been tested on Power7 machine with Petitboot as a primary bootloader and PowerNV firmware. Signed-off-by:
Eugene Surovegin <surovegin@google.com> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Paul Mackerras authored
commit bdbc29c1 upstream. On 64-bit, __pa(&static_var) gets miscompiled by recent versions of gcc as something like: addis 3,2,.LANCHOR1+4611686018427387904@toc@ha addi 3,3,.LANCHOR1+4611686018427387904@toc@l This ends up effectively ignoring the offset, since its bottom 32 bits are zero, and means that the result of __pa() still has 0xC in the top nibble. This happens with gcc 4.8.1, at least. To work around this, for 64-bit we make __pa() use an AND operator, and for symmetry, we make __va() use an OR operator. Using an AND operator rather than a subtraction ends up with slightly shorter code since it can be done with a single clrldi instruction, whereas it takes three instructions to form the constant (-PAGE_OFFSET) and add it on. (Note that MEMORY_START is always 0 on 64-bit.) Signed-off-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
-
Benjamin Herrenschmidt authored
commit f5f6cbb6 upstream. /proc/powerpc/lparcfg is an ancient facility (though still actively used) which allows access to some informations relative to the partition when running underneath a PAPR compliant hypervisor. It makes no sense on non-pseries machines. However, currently, not only can it be created on these if the kernel has pseries support, but accessing it on such a machine will crash due to trying to do hypervisor calls. In fact, it should also not do HV calls on older pseries that didn't have an hypervisor either. Finally, it has the plumbing to be a module but is a "bool" Kconfig option. This fixes the whole lot by turning it into a machine_device_initcall that is only created on pseries, and adding the necessary hypervisor check before calling the H_GET_EM_PARMS hypercall Signed-off-by:
-
Helmut Schaa authored
commit d2e9fc14 upstream. ath9k_htc adds padding between the 802.11 header and the payload during TX by moving the header. When handing the frame back to mac80211 for TX status handling the header is not moved back into its original position. This can result in a too small skb headroom when entering ath9k_htc again (due to a soft retransmission for example) causing an skb_under_panic oops. Fix this by moving the 802.11 header back into its original position before returning the frame to mac80211 as other drivers like rt2x00 or ath5k do. Reported-by:
Marc Kleine-Budde <mkl@blackshift.org> Signed-off-by:
Helmut Schaa <helmut.schaa@googlemail.com> Tested-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
Stanislaw Gruszka authored
commit b2fcc0ae upstream. My current 3.11 fix: commit 788f7a56 Author: Stanislaw Gruszka <sgruszka@redhat.com> Date: Thu Aug 1 12:07:55 2013 +0200 iwl4965: reset firmware after rfkill off broke rfkill notification to user-space . I missed that bug, because I compiled without CONFIG_RFKILL, sorry about that. Signed-off-by:
Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by:
-
Richard Kuo authored
commit 6bbbc30c upstream. Fixed warnings/errors for EXPORT_SYMBOL, linux_binprm, elf related defines Signed-off-by:
Richard Kuo <rkuo@codeaurora.org> Signed-off-by:
-
