dnotify now gets a mark in the should_send_event and handle_event
functions.  Rather than look up the mark themselves dnotify should just use
the mark it was handed.
Signed-off-by: Eric Paris <eparis@redhat.com>

inotify now gets a mark in the should_send_event and handle_event
functions.  Rather than look up the mark themselves inotify should just use
the mark it was handed.
Signed-off-by: Eric Paris <eparis@redhat.com>

With the change of fsnotify to use srcu walking the marks list instead of
walking the global groups list we now know the mark in question.  The code can
send the mark to the group's handling functions and the groups won't have to
find those marks themselves.
Signed-off-by: Eric Paris <eparis@redhat.com>

Instead of moving list elements from destroy_list to &private_destroy_list,
exchange the list heads.
Signed-off-by: Andreas Gruenbacher <agruen@suse.de>
Signed-off-by: Eric Paris <eparis@redhat.com>

Currently reading the inode->i_fsnotify_marks or
vfsmount->mnt_fsnotify_marks lists are protected by a spinlock on both the
read and the write side.  This patch protects the read side of those lists
with a new single srcu.
Signed-off-by: Eric Paris <eparis@redhat.com>

Currently fsnotify check is mark->group is NULL to decide if
fsnotify_destroy_mark() has already been called or not.  With the upcoming
rcu work it is a heck of a lot easier to use an explicit flag than worry
about group being set to NULL.
Signed-off-by: Eric Paris <eparis@redhat.com>

In preparation for srcu locking use all _rcu appropiete functions for mark
list addition, removal, and traversal.  The operations are still done under a
spinlock at the end of this patch.
Signed-off-by: Eric Paris <eparis@redhat.com>

fsnotify_marks currently are placed on objects (inodes or vfsmounts) in
arbitrary order.  This patch places them in order of the group memory address.
Signed-off-by: Eric Paris <eparis@redhat.com>

fanotify almost works like so:

user context calls fsnotify_* function with a struct file.
   fsnotify takes a reference on the struct path
user context goes about it's buissiness

at some later point in time the fsnotify listener gets the struct path
   fanotify listener calls dentry_open() to create a file which userspace can deal with
      listener drops the reference on the struct path
at some later point the listener calls close() on it's new file

With the switch from struct path to struct file this presents a problem for
fput() and fsnotify_close().  fsnotify_close() is called when the filp has
already reached 0 and __fput() wants to do it's cleanup.

The solution presented here is a bit odd.  If an event is created from a
struct file we take a reference on the file.  We check however if the f_count
was already 0 and if so we take an EXTRA reference EVEN THOUGH IT WAS ZERO.
In __fput() (where we know the f_count hit 0 once) we check if the f_count is
non-zero and if so we drop that 'extra' ref and return without destroying the
file.
Signed-off-by: Eric Paris <eparis@redhat.com>

Al explains that calling dentry_open() with a mnt/dentry pair is only
garunteed to be safe if they are already used in an open struct file.  To
make sure this is the case don't store and use a struct path in fsnotify,
always use a struct file.
Signed-off-by: Eric Paris <eparis@redhat.com>

Rather than the horrific void ** argument and such just to pass the
fanotify_merge event back to the caller of fsnotify_add_notify_event() have
those things return an event if it was different than the event suggusted to
be added.
Signed-off-by: Eric Paris <eparis@redhat.com>

It can be hard to debug fsnotify since there are so few printks.  Use
pr_debug to allow for dynamic debugging.
Signed-off-by: Eric Paris <eparis@redhat.com>

Currently fanotify fds opened for thier listeners are done with f_flags
equal to O_RDONLY | O_LARGEFILE.  This patch instead takes f_flags from the
fanotify_init syscall and uses those when opening files in the context of
the listener.
Signed-off-by: Eric Paris <eparis@redhat.com>

This patch adds a check to make sure that all fsnotify bits are unique and we
cannot accidentally use the same bit for 2 different fsnotify event types.
Signed-off-by: Eric Paris <eparis@redhat.com>

The mask checks in inotify_update_existing_watch() and
inotify_new_watch() are useless because inotify_arg_to_mask() sets
FS_IN_IGNORED and FS_EVENT_ON_CHILD bits anyway.
Signed-off-by: Eric Paris <eparis@redhat.com>

inotify uses bits called IN_* and fsnotify uses bits called FS_*.  These
need to line up.  This patch adds build time checks to make sure noone can
change these bits so they are not the same.
Signed-off-by: Eric Paris <eparis@redhat.com>

An inotify watch on a directory will send events for children even if those
children have been unlinked.  This patch add a new inotify flag IN_EXCL_UNLINK
which allows a watch to specificy they don't care about unlinked children.
This should fix performance problems seen by tasks which add a watch to
/tmp and then are overrun with events when other processes are reading and
writing to unlinked files they created in /tmp.

https://bugzilla.kernel.org/show_bug.cgi?id=16296Requested-by: Matthias Clasen <mclasen@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>

Since the .31 or so notify rewrite inotify has not sent events about
inodes which are unmounted.  This patch restores those events.
Signed-off-by: Eric Paris <eparis@redhat.com>

During the large inotify rewrite to fsnotify I completely dropped support
for IN_ONESHOT.  Reimplement that support.
Signed-off-by: Eric Paris <eparis@redhat.com>

Implicit slab.h inclusion via percpu.h is about to go away.  Make sure
gfp.h or slab.h is included as necessary.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Eric Paris <eparis@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>

The priority argument in fanotify is useless.  Kill it.
Signed-off-by: Eric Paris <eparis@redhat.com>

fanotify has default to y in linux-next since it's inception but default to
n in the final push to Linus.
Signed-off-by: Eric Paris <eparis@redhat.com>

The symbol inotify_max_user_watches is not used outside this
file and should be static.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: John McCutchan <john@johnmccutchan.com>
Cc: Robert Love <rlove@rlove.org>
Cc: Eric Paris <eparis@parisplace.org>
Signed-off-by: Eric Paris <eparis@redhat.com>

akpm got a warning the fsnotify_mask could be used uninitialized in
fsnotify_perm().  It's not actually possible but his compiler complained
about it.  This patch just initializes it to 0 to shut up the compiler.
Reported-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Eric Paris <eparis@redhat.com>

fsnotify takes an igrab on an inode when it adds a mark.  The code was
supposed to drop the reference when the mark was removed but didn't.
This caused problems when an fs was unmounted because those inodes would
clearly not be gone.  Thus resulting in the most devistating of messages:

VFS: Busy inodes after unmount of loop0. Self-destruct in 5 seconds.
>>> Have a nice day...

Jiri Slaby bisected the problem to a patch in the fsnotify tree.  The
code snippets below show my stupidity quite clearly.

void fsnotify_destroy_inode_mark(struct fsnotify_mark *mark)
{
	...
	mark->inode = NULL;
	...
}

void fsnotify_destroy_mark(struct fsnotify_mark *mark)
{
	struct inode *inode = NULL;
	...
	if (mark->flags & FSNOTIFY_MARK_FLAG_INODE) {
		fsnotify_destroy_inode_mark(mark);
		inode = mark->i.inode;
	}
	...
	if (inode)
		iput(inode);
	...
}

Obviously the intent was to capture the inode before it was set to NULL in
fsnotify_destory_inode_mark() so we wouldn't be leaking inodes forever.
Instead we leaked them (and exploded on umount)
Reported-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Eric Paris <eparis@redhat.com>

It seems to me you are always returning 0 in fsnotify, when you should return
the error (EPERM) returned by fanotify.
Signed-off-by: Jean-Christophe DUBOIS <jcd@tribudubois.net>
Signed-off-by: Eric Paris <eparis@redhat.com>

remove_access_response() is supposed to have a void return, but was
returning 0;
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Eric Paris <eparis@redhat.com>

fanotify groups need to respond to events which include permissions types.
To do so groups will send a response using write() on the fanotify_fd they
have open.
Signed-off-by: Eric Paris <eparis@redhat.com>

This is the backend work needed for fanotify to support the new
FS_OPEN_PERM and FS_ACCESS_PERM fsnotify events.  This is done using the
new fsnotify secondary queue.  No userspace interface is provided actually
respond to or request these events.
Signed-off-by: Eric Paris <eparis@redhat.com>

introduce a new fsnotify hook, fsnotify_perm(), which is called from the
security code.  This hook is used to allow fsnotify groups to make access
control decisions about events on the system.  We also must change the
generic fsnotify function to return an error code if we intend these hooks
to be in any way useful.
Signed-off-by: Eric Paris <eparis@redhat.com>

Extern declarations in sysctl.c should be move to their own head file, and
then include them in relavant .c files.

Move inotify_table extern declaration to linux/inotify.h
Signed-off-by: Dave Young <hidave.darkstar@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Eric Paris <eparis@redhat.com>

Move dir_notify_enable declaration to where it belongs -- dnotify.h .
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Eric Paris <eparis@redhat.com>

fsnotify was using char * when it passed around the d_name.name string
internally but it is actually an unsigned char *.  This patch switches
fsnotify to use unsigned and should silence some pointer signess warnings
which have popped out of xfs.  I do not add -Wpointer-sign to the fsnotify
code as there are still issues with kstrdup and strlen which would pop
out needless warnings.
Signed-off-by: Eric Paris <eparis@redhat.com>

fanotify needs to know the actual event added to queues so it can be
correctly checked for return values from userspace.  To do this we need to
pass that information from the merger code back to the main even handling
routine.  Currently that information is unused, but it will be.
Signed-off-by: Eric Paris <eparis@redhat.com>

Each group can define their own notification (and secondary_q) merge
function.  Inotify does tail drop, fanotify does matching and drop which
can actually allocate a completely new event.  But for fanotify to properly
deal with permissions events it needs to know the new event which was
ultimately added to the notification queue.  This patch just implements a
void ** argument which is passed to the merge function.  fanotify can use
this field to pass the new event back to higher layers.
Signed-off-by: Eric Paris <eparis@redhat.com>
for fanotify to properly deal with permissions events

This introduces an ordering to fsnotify groups.  With purely asynchronous
notification based "things" implementing fsnotify (inotify, dnotify) ordering
isn't particularly important.  But if people want to use fsnotify for the
basis of sycronous notification or blocking notification ordering becomes
important.

eg. A Hierarchical Storage Management listener would need to get its event
before an AV scanner could get its event (since the HSM would need to
bring the data in for the AV scanner to scan.)  Typically asynchronous notification
would want to run after the AV scanner made any relevant access decisions
so as to not send notification about an event that was denied.
Signed-off-by: Eric Paris <eparis@redhat.com>

fanotify listeners may want to clear all marks.  They may want to do this
to destroy all of their inode marks which have nothing but ignores.
Realistically this is useful for av vendors who update policy and want to
clear all of their cached allows.
Signed-off-by: Eric Paris <eparis@redhat.com>

Some users may want to truely ignore an inode even if it has been modified.
Say you are wanting a mount which contains a log file and you really don't
want any notification about that file.  This patch allows the listener to
do that.
Signed-off-by: Eric Paris <eparis@redhat.com>

Some inodes a group may want to never hear about a set of events even if
the inode is modified.  We add a new mark flag which indicates that these
marks should not have their ignored_mask cleared on modification.
Signed-off-by: Eric Paris <eparis@redhat.com>

On inode modification we clear the ignored mask for all of the marks on the
inode.  This allows userspace to ignore accesses to inodes until there is
something different.
Signed-off-by: Eric Paris <eparis@redhat.com>