- 21 Mar, 2006 40 commits
-
-
Michael Chan authored
Add fw_version information to ethtool -i. Signed-off-by:
Michael Chan <mchan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michael Chan authored
Some nvram related cleanup: 1. Add a tg3_nvram_read_swab() since swabing the data is frequently done. 2. Add a function to convert nvram address to physical address instead of doing it in 2 separate places. Signed-off-by:
-
Michael Chan authored
Ethtool memory test on 5787 requires a new memory table. Signed-off-by:
-
Michael Chan authored
Support one-shot MSI on 5787. This one-shot MSI idea is credited to David Miller. In this mode, MSI disables itself automatically after it is generated, saving the driver a register access to disable it for NAPI. Signed-off-by:
-
Michael Chan authored
Support ipv6 tx csum on 5787 by setting NETIF_F_HW_CSUM. Signed-off-by:
-
Michael Chan authored
Support 5787 hardware TSO using a new flag TG3_FLG2_HW_TSO_2. Since the TSO interface is slightly different and these chips have finally fixed the 4GB DMA problem and do not have the 40-bit DMA problem, a new hard_start_xmit is used for these chips. All previous chips will use the old hard_start_xmit that is now renamed tg3_start_xmit_dma_bug(). Signed-off-by:
-
Michael Chan authored
Support additional nvrams and new nvram format for 5787 and 5754. Signed-off-by:
-
Michael Chan authored
Add basic support for 2 new chips 5787 and 5754. Signed-off-by:
-
Benjamin LaHaise authored
Here's an updated copy of the patch to use fget_light in net/socket.c. Rerunning the tests show a drop of ~80Mbit/s on average, which looks bad until you see the drop in cpu usage from ~89% to ~82%. That will get fixed in another patch... Before: max 8113.70, min 8026.32, avg 8072.34 87380 16384 16384 10.01 8045.55 87.11 87.11 1.774 1.774 87380 16384 16384 10.01 8065.14 90.86 90.86 1.846 1.846 87380 16384 16384 10.00 8077.76 89.85 89.85 1.822 1.822 87380 16384 16384 10.00 8026.32 89.80 89.80 1.833 1.833 87380 16384 16384 10.01 8108.59 89.81 89.81 1.815 1.815 87380 16384 16384 10.01 8034.53 89.01 89.01 1.815 1.815 87380 16384 16384 10.00 8113.70 90.45 90.45 1.827 1.827 87380 16384 16384 10.00 8111.37 89.90 89.90 1.816 1.816 87380 16384 16384 10.01 8077.75 87.96 87.96 1.784 1.784 87380 16384 16384 10.00 8062.70 90.25 90.25 1.834 1.834 After: max 8035.81, min 7963.69, avg 7998.14 87380 16384 16384 10.01 8000.93 82.11 82.11 1.682 1.682 87380 16384 16384 10.01 8016.17 83.67 83.67 1.710 1.710 87380 16384 16384 10.01 7963.69 83.47 83.47 1.717 1.717 87380 16384 16384 10.01 8014.35 81.71 81.71 1.671 1.671 87380 16384 16384 10.00 7967.68 83.41 83.41 1.715 1.715 87380 16384 16384 10.00 7995.22 81.00 81.00 1.660 1.660 87380 16384 16384 10.00 8002.61 83.90 83.90 1.718 1.718 87380 16384 16384 10.00 8035.81 81.71 81.71 1.666 1.666 87380 16384 16384 10.01 8005.36 82.56 82.56 1.690 1.690 87380 16384 16384 10.00 7979.61 82.50 82.50 1.694 1.694 Signed-off-by:
Benjamin LaHaise <bcrl@linux.intel.com> Signed-off-by:
-
Stephen Hemminger authored
The functions list_del followed by list_add_tail is equivalent to the existing inline list_move_tail. list_move_tail avoids unnecessary _LIST_POISON. Signed-off-by:
Stephen Hemminger <shemminger@osdl.org> Signed-off-by:
-
Alpt authored
The Netsukuku daemon is using the same number to mark its routes, you can see it here: http://hinezumilabs.org/cgi-bin/viewcvs.cgi/netsukuku/src/krnl_route.h?rev=HEAD&content-type=text/vnd.viewcvs-markupSigned-off-by:
-
Michael S. Tsirkin authored
struct neigh_ops currently has a destructor field, which no in-kernel drivers outside of infiniband use. The infiniband/ulp/ipoib in-tree driver stashes some info in the neighbour structure (the results of the second-stage lookup from ARP results to real link-level path), and it uses neigh->ops->destructor to get a callback so it can clean up this extra info when a neighbour is freed. We've run into problems with this: since the destructor is in an ops field that is shared between neighbours that may belong to different net devices, there's no way to set/clear it safely. The following patch moves this field to neigh_parms where it can be safely set, together with its twin neigh_setup. Two additional patches in the patch series update ipoib to use this new interface. Signed-off-by:
Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by:
Roland Dreier <rolandd@cisco.com> Signed-off-by:
-
Luiz Capitulino authored
Due to the thread's lock changes, we're at a new version now. Signed-off-by:
Luiz Capitulino <lcapitulino@mandriva.com.br> Signed-off-by:
-
Luiz Capitulino authored
As suggested by Arnaldo, this patch replaces the thread_lock()/thread_unlock() by directly calls to mutex_lock()/mutex_unlock(). This change makes the code a bit more readable, and the direct calls are used everywhere in the kernel. Signed-off-by:
-
Luiz Capitulino authored
pktgen's thread semaphores are strict mutexes, convert them to the mutex implementation. Signed-off-by:
-
Stephen Hemminger authored
This patch turns the RTNL from a semaphore to a new 2.6.16 mutex and gets rid of some of the leftover legacy. Signed-off-by:
-
David S. Miller authored
First, it warns when PAGE_SIZE >= 64K because the ctx_len field is 16-bits. Secondly, if there are any real length limitations it can be verified by the security layer security_xfrm_state_alloc() call. Signed-off-by: -
Baruch Even authored
Instead of estimating the time since the last congestion event, count it directly. Signed-off-by:
Baruch Even <baruch@ev-en.org> Signed-off-by:
-
Baruch Even authored
Account for delayed-ACKs in H-TCP. Delayed-ACKs cause H-TCP to be less aggressive than its design calls for. It is especially true when the receiver is a Linux machine where the average delayed ack is over 3 packets with values of 7 not unheard of. Signed-off-By:
-
Baruch Even authored
Use functions to calculate jiffies from milliseconds and not the old, crude method of dividing HZ by a value. Ensures more accurate values even in the face of strange HZ values. Signed-off-By:
-
Evgeniy Polyakov authored
Return -ESRCH from cn_netlink_send() when there are not listeners, just as it could be done by netlink_broadcast(). Propagate netlink_broadcast() error back to the caller. Signed-off-by:
Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by:
-
David Basden authored
Here goes a patch for supporting TOIM3232 based serial IrDA dongles. The code is based on the tekram dongle code. It's been tested with a TOIM3232 based IRWave 320S dongle. It may work for TOIM4232 dongles, although it's not been tested. Signed-off-by:
David Basden <davidb-irda@rcpt.to> Signed-off-by:
Samuel Ortiz <samuel.ortiz@nokia.com> Signed-off-by:
-
Luiz Capitulino authored
With all the previous changes, we're at a new version now. Signed-off-by:
-
Luiz Capitulino authored
This patch ports the per-thread interface list list to the in-kernel linked list implementation. In the general, the resulting code is a bit simpler. Signed-off-by:
-
Luiz Capitulino authored
Even if pktgen's thread initialization fails for all CPUs, the module will be successfully loaded. This patch changes that behaivor, by returning an error on module load time, and also freeing all the resources allocated. It also prints a warning if a thread initialization has failed. Signed-off-by:
-
Luiz Capitulino authored
Free all the alocated resources if kernel_thread() call fails. Signed-off-by:
-
Luiz Capitulino authored
The final result is a simpler and smaller code. Note that I'm adding a new member in the struct pktgen_thread called 'removed'. The reason is that I didn't find a better wait condition to be used in the place of the replaced one. Signed-off-by:
-
Luiz Capitulino authored
Lindet run, with some fixes made by hand. Signed-off-by:
-
Arnaldo Carvalho de Melo authored
According to dccp draft (draft-ietf-dccp-spec-13.txt) section 5.8.2 (Mandatory Option) the following patch correct the handling of the following cases: 1) "... and any Mandatory options received on DCCP-Data packets MUST be ignored." 2) "The connection is in error and should be reset with Reset Code 5, ... if option O is absent (Mandatory was the last byte of the option list), or if option O equals Mandatory." Signed-off-by:
Arnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by:
Hagen Paul Pfeifer <hagen@jauu.net> Signed-off-by:
-
Arnaldo Carvalho de Melo authored
No changes in the logic where made. Signed-off-by:
-
Arnaldo Carvalho de Melo authored
No changes in the logic were made, just removing trailing whitespaces, etc. Signed-off-by:
-
Arnaldo Carvalho de Melo authored
Consolidating open coded sequences in tcp and dccp, v4 and v6. Signed-off-by:
-
Arnaldo Carvalho de Melo authored
I guess I forgot to add it, nah, now it just works: 18:04:33.274066 IP6 ::1.1476 > ::1.5001: request (service=0) 18:04:33.334482 IP6 ::1.5001 > ::1.1476: reset (code=bad_service_code) Ditched IP_DCCP_UNLOAD_HACK, as now we would have to do it for both IPv6 and IPv4, so I'll come up with another way for freeing the control sockets in upcoming changesets. Signed-off-by:
-
Arnaldo Carvalho de Melo authored
Signed-off-by:
-
Adrian Bunk authored
There's no reason for struct dccp_v4_prot being global. Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
-
David S. Miller authored
Signed-off-by: -
Robert Olsson authored
fib_triestats has been buggy and caused oopses some platforms as openwrt. The patch below should cure those problems. Signed-off-by:
Robert Olsson <robert.olsson@its.uu.se> Signed-off-by:
-
Robert Olsson authored
In some kernel configs /proc functions seems to be accessed before the trie is initialized. The patch below checks for this. Signed-off-by:
-
Michael Chan authored
Fix-up tg3_get_ringparam() to return the correct parameters. Set the jumbo rx ring parameter only if it is supported by the chip and currently in use. Add missing value for tx_max_pending, noticed by Rick Jones. Update version to 3.51. Signed-off-by:
-
Michael Chan authored
Add missing netif_running() checks in tg3's dev->set_multicast_list() and dev->set_mac_address(). If not netif_running(), these 2 calls can simply return 0 after storing the new settings if required. Signed-off-by:
-
