The number of variables at the stack is too big.
Reduces the stack usage by using a pre-allocated error
buffer.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

APEI GHES and i7core_edac/sb_edac currently can be loaded at
the same time, but those are Highlander modules:
	"There can be only one".

There are two reasons for that:

1) Each driver assumes that it is the only one registering at
   the EDAC core, as it is driver's responsibility to number
   the memory controllers, and all of them start from 0;

2) If BIOS is handling the memory errors, the OS can't also be
   doing it, as one will mangle with the other.

So, we need to add an module owner's lock at the EDAC core,
in order to avoid having two different modules handling memory
errors at the same time. The best way for doing this lock seems
to use the driver's name, as this is unique, and won't require
changes on every driver.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

proc_name isn't used anywhere. Remove it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

There are some cases where the memory controller layout is
completely hidden. This is the case of firmware-driven error
code, like the one provided by GHES. Add a new layer to be
used on such memory error report mechanisms.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

In order for it to work with it builtin, the EDAC core should
be initialized earlier, otherwise the ghes_edac driver initializes
before edac_mc_sysfs_init() being called:

...
[    4.998373] EDAC MC0: Giving out device to 'ghes_edac.c' 'ghes_edac': DEV ghes
...
[    4.998373] EDAC MC1: Giving out device to 'ghes_edac.c' 'ghes_edac': DEV ghes
[    6.519495] EDAC MC: Ver: 3.0.0
[    6.523749] EDAC DEBUG: edac_mc_sysfs_init: device mc created

The net result is that no EDAC sysfs nodes will appear.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

It is hard to find what's wrong without a proper error
report. Improve it, in debug mode.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

The last changeset introduced a few checkpatch warnings:

WARNING: debugfs_remove_recursive(NULL) is safe this check is probably not required
261: FILE: drivers/edac/i5100_edac.c:1207:
+       if (priv->debugfs)
+               debugfs_remove_recursive(priv->debugfs);

WARNING: debugfs_remove(NULL) is safe this check is probably not required
290: FILE: drivers/edac/i5100_edac.c:1250:
+       if (i5100_debugfs)
+               debugfs_remove(i5100_debugfs);

Get rid of them.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Create a debugfs direcotry i5100_edac/mcX for each memory controller and
add nodes to control how fault injection is preformed.

After configuring an injection using inject_channel, inject_deviceptr1,
inject_deviceptr2, inject_eccmask1, inject_eccmask2 and inject_hlinesel
trigger the injection by writing anything to inject_enable.

Example of a CE injection:

echo 0 > /sys/kernel/debug/i5100_edac/mc0/inject_channel
echo 1 > /sys/kernel/debug/i5100_edac/mc0/inject_hlinesel
echo 61440 > /sys/kernel/debug/i5100_edac/mc0/inject_eccmask1
echo 1 > /sys/kernel/debug/i5100_edac/mc0/inject_enable

Example of UE injection:

echo 0 > /sys/kernel/debug/i5100_edac/mc0/inject_channel
echo 2 > /sys/kernel/debug/i5100_edac/mc0/inject_hlinesel
echo 65535 > /sys/kernel/debug/i5100_edac/mc0/inject_eccmask1
echo 65535 > /sys/kernel/debug/i5100_edac/mc0/inject_eccmask2
echo 17 > /sys/kernel/debug/i5100_edac/mc0/inject_deviceptr1
echo 0 > /sys/kernel/debug/i5100_edac/mc0/inject_deviceptr2
echo 1 > /sys/kernel/debug/i5100_edac/mc0/inject_enable

Sometimes it is needed to enable the injection more then once (echo to
the inject_enable node) for the injection to happen, I am not sure why.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ericsson.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Add fault injection based on information datasheet for i5100, see 1. In
addition to the i5100 datasheet some missing information on injection
functions where found through experimentation and the i7300 datasheet,
see 2.

[1] Intel 5100 Memory Controller Hub Chipset
    Doc.Nr: 318378
    http://www.intel.com/content/dam/doc/datasheet/5100-
    memory-controller-hub-chipset-datasheet.pdf

[2] Intel 7300 Chipset MemoryController Hub (MCH)
    Doc.Nr: 318082
	http://www.intel.com/assets/pdf/datasheet/318082.pdfSigned-off-by: Niklas Söderlund <niklas.soderlund@ericsson.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Probe and store the device handle for the device 19 function 0 during
driver initialization. The device is used during fault injection.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ericsson.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Currently, sdram_scrub_rate sysfs node is created even if the device
doesn't support get/set the scub rate. Change the logic to only
create this device node when the operation is supported.
Reported-by: Felipe Balbi <balbi@ti.com>
Acked-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

After running a series of tests on an HP DL320, filled with different
memory sizes, it was noticed that, when filled with just one DIMM
on such hardware, the driver wrongly detects twice the memory, and
thinks that both channels 0 and 1 are filled.

It seems to be partially caused by the BIOS and partially by the driver.

The i3200_edac current logic would be working fine if the BIOS were
disabling the unused second channel when just one DIMM is connected,
in order to do power-saving, as recommended on this chipset's datasheet.

However, the BIOS on this particular machine doesn't do it:

[   16.741421] EDAC DEBUG: how_many_channels: In dual channel mode
[   16.741424] EDAC DEBUG: how_many_channels: 2 DIMMS per channel enabled

So, the driver were assuming that 2 channels are enabled (well, they are,
but the second is unused).

Combined with that, I found two issues at the logic that creates the
EDAC data, that were failing when the two channels are not equally
filled (AFAICT, that happens only when just 1 DIMM is plugged).

The first one is that a 0 at DRB means that nothing is filled. The
driver's logic, however, do some calculation with that.

The second one is that the logic that fills the DIMM data currently
assumes that both channels are equally filled.

I tested the system already with the current configuration and my
patch and it is now working fine. So, for a 2R single DIMM 2Gb memory
at dimm slot 01 (channel 0), it is now displaying:

[   16.741406] EDAC DEBUG: i3200_get_drbs: drb[0][0] = 16, drb[1][0] = 0
[   16.741410] EDAC DEBUG: i3200_get_drbs: drb[0][1] = 32, drb[1][1] = 0
[   16.741413] EDAC DEBUG: i3200_get_drbs: drb[0][2] = 32, drb[1][2] = 0
[   16.741416] EDAC DEBUG: i3200_get_drbs: drb[0][3] = 32, drb[1][3] = 0
...
[   16.741896] EDAC DEBUG: i3200_probe1: csrow 0, channel 0, size = 1024 Mb
[   16.741899] EDAC DEBUG: i3200_probe1: csrow 1, channel 0, size = 1024 Mb

and the corresponding sysfs nodes are now properly filled.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Currently, it is not possible to know, when debug is enabled,
if the driver is using 2 DIMMS per channel mode or not. It is
not possible to know the values of the drbs registers, used
to identify the memory rank sizes.

Add debug for both, as it helps to track issues on the driver.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Linux 3.8-rc7

* tag 'v3.8-rc7': (12052 commits)
  Linux 3.8-rc7
  net: sctp: sctp_endpoint_free: zero out secret key data
  net: sctp: sctp_setsockopt_auth_key: use kzfree instead of kfree
  atm/iphase: rename fregt_t -> ffreg_t
  ARM: 7641/1: memory: fix broken mmap by ensuring TASK_UNMAPPED_BASE is aligned
  ARM: DMA mapping: fix bad atomic test
  ARM: realview: ensure that we have sufficient IRQs available
  ARM: GIC: fix GIC cpumask initialization
  net: usb: fix regression from FLAG_NOARP code
  l2tp: dont play with skb->truesize
  net: sctp: sctp_auth_key_put: use kzfree instead of kfree
  netback: correct netbk_tx_err to handle wrap around.
  xen/netback: free already allocated memory on failure in xen_netbk_get_requests
  xen/netback: don't leak pages on failure in xen_netbk_tx_check_gop.
  xen/netback: shutdown the ring if it contains garbage.
  drm/ttm: fix fence locking in ttm_buffer_object_transfer, 2nd try
  virtio_console: Don't access uninitialized data.
  net: qmi_wwan: add more Huawei devices, including E320
  net: cdc_ncm: add another Huawei vendor specific device
  ipv6/ip6_gre: fix error case handling in ip6gre_tunnel_xmit()
  ...

Pull ARM fixes from Russell King:
 "I was going to hold these off until v3.8 was out, and send them with a
  stable tag, but as everyone else is pushing much bigger fixes which
  Linus is accepting, let's save people from the hastle of having to
  patch v3.8 back into working or use a stable kernel.

  Looking at the diffstat, this really is high value for its size; this
  is miniscule compared to how the -rc6 to tip diffstat currently looks.

  So, four patches in this set:
   - Punit Agrawal reports that the kernel no longer boots on MPCore due
     to a new assumption made in the GIC code which isn't true of
     earlier GIC designs.  This is the biggest change in this set.
   - Punit's boot log also revealed a bunch of WARN_ON() dumps caused by
     the DT-ification of the GIC support without fixing up non-DT
     Realview - which now sees a greater number of interrupts than it
     did before.
   - A fix for the DMA coherent code from Marek which uses the wrong
     check for atomic allocations; this can result in spinlock lockups
     or other nasty effects.
   - A fix from Will, which will affect all Android based platforms if
     not applied (which use the 2G:2G VM split) - this causes
     particularly 'make' to misbehave unless this bug is fixed."

* 'fixes' of git://git.linaro.org/people/rmk/linux-arm:
  ARM: 7641/1: memory: fix broken mmap by ensuring TASK_UNMAPPED_BASE is aligned
  ARM: DMA mapping: fix bad atomic test
  ARM: realview: ensure that we have sufficient IRQs available
  ARM: GIC: fix GIC cpumask initialization

Pull networking fixes from David Miller:

 1) Revert iwlwifi reclaimed packet tracking, it causes problems for a
    bunch of folks.  From Emmanuel Grumbach.

 2) Work limiting code in brcmsmac wifi driver can clear tx status
    without processing the event.  From Arend van Spriel.

 3) rtlwifi USB driver processes wrong SKB, fix from Larry Finger.

 4) l2tp tunnel delete can race with close, fix from Tom Parkin.

 5) pktgen_add_device() failures are not checked at all, fix from Cong
    Wang.

 6) Fix unintentional removal of carrier off from tun_detach(),
    otherwise we confuse userspace, from Michael S.  Tsirkin.

 7) Don't leak socket reference counts and ubufs in vhost-net driver,
    from Jason Wang.

 8) vmxnet3 driver gets it's initial carrier state wrong, fix from Neil
    Horman.

 9) Protect against USB networking devices which spam the host with 0
    length frames, from Bjørn Mork.

10) Prevent neighbour overflows in ipv6 for locally destined routes,
    from Marcelo Ricardo.  This is the best short-term fix for this, a
    longer term fix has been implemented in net-next.

11) L2TP uses ipv4 datagram routines in it's ipv6 code, whoops.  This
    mistake is largely because the ipv6 functions don't even have some
    kind of prefix in their names to suggest they are ipv6 specific.
    From Tom Parkin.

12) Check SYN packet drops properly in tcp_rcv_fastopen_synack(), from
    Yuchung Cheng.

13) Fix races and TX skb freeing bugs in via-rhine's NAPI support, from
    Francois Romieu and your's truly.

14) Fix infinite loops and divides by zero in TCP congestion window
    handling, from Eric Dumazet, Neal Cardwell, and Ilpo Järvinen.

15) AF_PACKET tx ring handling can leak kernel memory to userspace, fix
    from Phil Sutter.

16) Fix error handling in ipv6 GRE tunnel transmit, from Tommi Rantala.

17) Protect XEN netback driver against hostile frontend putting garbage
    into the rings, don't leak pages in TX GOP checking, and add proper
    resource releasing in error path of xen_netbk_get_requests().  From
    Ian Campbell.

18) SCTP authentication keys should be cleared out and released with
    kzfree(), from Daniel Borkmann.

19) L2TP is a bit too clever trying to maintain skb->truesize, and ends
    up corrupting socket memory accounting to the point where packet
    sending is halted indefinitely.  Just remove the adjustments
    entirely, they aren't really needed.  From Eric Dumazet.

20) ATM Iphase driver uses a data type with the same name as the S390
    headers, rename to fix the build.  From Heiko Carstens.

21) Fix a typo in copying the inner network header offset from one SKB
    to another, from Pravin B Shelar.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (56 commits)
  net: sctp: sctp_endpoint_free: zero out secret key data
  net: sctp: sctp_setsockopt_auth_key: use kzfree instead of kfree
  atm/iphase: rename fregt_t -> ffreg_t
  net: usb: fix regression from FLAG_NOARP code
  l2tp: dont play with skb->truesize
  net: sctp: sctp_auth_key_put: use kzfree instead of kfree
  netback: correct netbk_tx_err to handle wrap around.
  xen/netback: free already allocated memory on failure in xen_netbk_get_requests
  xen/netback: don't leak pages on failure in xen_netbk_tx_check_gop.
  xen/netback: shutdown the ring if it contains garbage.
  net: qmi_wwan: add more Huawei devices, including E320
  net: cdc_ncm: add another Huawei vendor specific device
  ipv6/ip6_gre: fix error case handling in ip6gre_tunnel_xmit()
  tcp: fix for zero packets_in_flight was too broad
  brcmsmac: rework of mac80211 .flush() callback operation
  ssb: unregister gpios before unloading ssb
  bcma: unregister gpios before unloading bcma
  rtlwifi: Fix scheduling while atomic bug
  net: usbnet: fix tx_dropped statistics
  tcp: ipv6: Update MIB counters for drops
  ...

Daniel Borkmann says:

====================
Cryptographically used keys should be zeroed out when our session
ends resp. memory is freed, thus do not leave them somewhere in the
memory.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

On sctp_endpoint_destroy, previously used sensitive keying material
should be zeroed out before the memory is returned, as we already do
with e.g. auth keys when released.
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Acked-by: Vlad Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In sctp_setsockopt_auth_key, we create a temporary copy of the user
passed shared auth key for the endpoint or association and after
internal setup, we free it right away. Since it's sensitive data, we
should zero out the key before returning the memory back to the
allocator. Thus, use kzfree instead of kfree, just as we do in
sctp_auth_key_put().
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We have conflicting type qualifiers for "freg_t" in s390's ptrace.h and the
iphase atm device driver, which causes the compile error below.
Unfortunately the s390 typedef can't be renamed, since it's a user visible api,
nor can I change the include order in s390 code to avoid the conflict.

So simply rename the iphase typedef to a new name. Fixes this compile error:

In file included from drivers/atm/iphase.c:66:0:
drivers/atm/iphase.h:639:25: error: conflicting type qualifiers for 'freg_t'
In file included from next/arch/s390/include/asm/ptrace.h:9:0,
                 from next/arch/s390/include/asm/lowcore.h:12,
                 from next/arch/s390/include/asm/thread_info.h:30,
                 from include/linux/thread_info.h:54,
                 from include/linux/preempt.h:9,
                 from include/linux/spinlock.h:50,
                 from include/linux/seqlock.h:29,
                 from include/linux/time.h:5,
                 from include/linux/stat.h:18,
                 from include/linux/module.h:10,
                 from drivers/atm/iphase.c:43:
next/arch/s390/include/uapi/asm/ptrace.h:197:3: note: previous declaration of 'freg_t' was here
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: chas williams - CONTRACTOR <chas@cmf.nrl.navy.mil>
Signed-off-by: David S. Miller <davem@davemloft.net>

We have received multiple reports of mmap failures when running with a
2:2 vm split. These manifest as either -EINVAL with a non page-aligned
address (ending 0xaaa) or a SEGV, depending on the application. The
issue is commonly observed in children of make, which appears to use
bottom-up mmap (assumedly because it changes the stack rlimit).

Further investigation reveals that this regression was triggered by
394ef640 ("mm: use vm_unmapped_area() on arm architecture"), whereby
TASK_UNMAPPED_BASE is no longer page-aligned for bottom-up mmap, causing
get_unmapped_area to choke on misaligned addressed.

This patch fixes the problem by defining TASK_UNMAPPED_BASE in terms of
TASK_SIZE and explicitly aligns the result to 16M, matching the other
end of the heap.
Acked-by: Nicolas Pitre <nico@linaro.org>
Reported-by: Steve Capper <steve.capper@arm.com>
Reported-by: Jean-Francois Moine <moinejf@free.fr>
Reported-by: Christoffer Dall <cdall@cs.columbia.edu>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Realview fails to boot with this warning:
BUG: spinlock lockup suspected on CPU#0, init/1
 lock: 0xcf8bde10, .magic: dead4ead, .owner: init/1, .owner_cpu: 0
Backtrace:
[<c00185d8>] (dump_backtrace+0x0/0x10c) from [<c03294e8>] (dump_stack+0x18/0x1c) r6:cf8bde10 r5:cf83d1c0 r4:cf8bde10 r3:cf83d1c0
[<c03294d0>] (dump_stack+0x0/0x1c) from [<c018926c>] (spin_dump+0x84/0x98)
[<c01891e8>] (spin_dump+0x0/0x98) from [<c0189460>] (do_raw_spin_lock+0x100/0x198)
[<c0189360>] (do_raw_spin_lock+0x0/0x198) from [<c032cbac>] (_raw_spin_lock+0x3c/0x44)
[<c032cb70>] (_raw_spin_lock+0x0/0x44) from [<c01c9224>] (pl011_console_write+0xe8/0x11c)
[<c01c913c>] (pl011_console_write+0x0/0x11c) from [<c002aea8>] (call_console_drivers.clone.7+0xdc/0x104)
[<c002adcc>] (call_console_drivers.clone.7+0x0/0x104) from [<c002b320>] (console_unlock+0x2e8/0x454)
[<c002b038>] (console_unlock+0x0/0x454) from [<c002b8b4>] (vprintk_emit+0x2d8/0x594)
[<c002b5dc>] (vprintk_emit+0x0/0x594) from [<c0329718>] (printk+0x3c/0x44)
[<c03296dc>] (printk+0x0/0x44) from [<c002929c>] (warn_slowpath_common+0x28/0x6c)
[<c0029274>] (warn_slowpath_common+0x0/0x6c) from [<c0029304>] (warn_slowpath_null+0x24/0x2c)
[<c00292e0>] (warn_slowpath_null+0x0/0x2c) from [<c0070ab0>] (lockdep_trace_alloc+0xd8/0xf0)
[<c00709d8>] (lockdep_trace_alloc+0x0/0xf0) from [<c00c0850>] (kmem_cache_alloc+0x24/0x11c)
[<c00c082c>] (kmem_cache_alloc+0x0/0x11c) from [<c00bb044>] (__get_vm_area_node.clone.24+0x7c/0x16c)
[<c00bafc8>] (__get_vm_area_node.clone.24+0x0/0x16c) from [<c00bb7b8>] (get_vm_area_caller+0x48/0x54)
[<c00bb770>] (get_vm_area_caller+0x0/0x54) from [<c0020064>] (__alloc_remap_buffer.clone.15+0x38/0xb8)
[<c002002c>] (__alloc_remap_buffer.clone.15+0x0/0xb8) from [<c0020244>] (__dma_alloc+0x160/0x2c8)
[<c00200e4>] (__dma_alloc+0x0/0x2c8) from [<c00204d8>] (arm_dma_alloc+0x88/0xa0)[<c0020450>] (arm_dma_alloc+0x0/0xa0) from [<c00beb00>] (dma_pool_alloc+0xcc/0x1a8)
[<c00bea34>] (dma_pool_alloc+0x0/0x1a8) from [<c01a9d14>] (pl08x_fill_llis_for_desc+0x28/0x568)
[<c01a9cec>] (pl08x_fill_llis_for_desc+0x0/0x568) from [<c01aab8c>] (pl08x_prep_slave_sg+0x258/0x3b0)
[<c01aa934>] (pl08x_prep_slave_sg+0x0/0x3b0) from [<c01c9f74>] (pl011_dma_tx_refill+0x140/0x288)
[<c01c9e34>] (pl011_dma_tx_refill+0x0/0x288) from [<c01ca748>] (pl011_start_tx+0xe4/0x120)
[<c01ca664>] (pl011_start_tx+0x0/0x120) from [<c01c54a4>] (__uart_start+0x48/0x4c)
[<c01c545c>] (__uart_start+0x0/0x4c) from [<c01c632c>] (uart_start+0x2c/0x3c)
[<c01c6300>] (uart_start+0x0/0x3c) from [<c01c795c>] (uart_write+0xcc/0xf4)
[<c01c7890>] (uart_write+0x0/0xf4) from [<c01b0384>] (n_tty_write+0x1c0/0x3e4)
[<c01b01c4>] (n_tty_write+0x0/0x3e4) from [<c01acfe8>] (tty_write+0x144/0x240)
[<c01acea4>] (tty_write+0x0/0x240) from [<c01ad17c>] (redirected_tty_write+0x98/0xac)
[<c01ad0e4>] (redirected_tty_write+0x0/0xac) from [<c00c371c>] (vfs_write+0xbc/0x150)
[<c00c3660>] (vfs_write+0x0/0x150) from [<c00c39c0>] (sys_write+0x4c/0x78)
[<c00c3974>] (sys_write+0x0/0x78) from [<c0014460>] (ret_fast_syscall+0x0/0x3c)

This happens because the DMA allocation code is not respecting atomic
allocations correctly.

GFP flags should not be tested for GFP_ATOMIC to determine if an
atomic allocation is being requested.  GFP_ATOMIC is not a flag but
a value.  The GFP bitmask flags are all prefixed with __GFP_.

The rest of the kernel tests for __GFP_WAIT not being set to indicate
an atomic allocation.  We need to do the same.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Realview EB with a rev B MPcore tile results in lots of warnings at
boot because it can't allocate enough IRQs.  Fix this by increasing
the number of available IRQs.

WARNING: at /home/rmk/git/linux-rmk/arch/arm/common/gic.c:757 gic_init_bases+0x12c/0x2ec()
Cannot allocate irq_descs @ IRQ96, assuming pre-allocated
Modules linked in:
Backtrace:
[<c00185d8>] (dump_backtrace+0x0/0x10c) from [<c03294e8>] (dump_stack+0x18/0x1c) r6:000002f5 r5:c042c62c r4:c044ff40 r3:c045f240
[<c03294d0>] (dump_stack+0x0/0x1c) from [<c00292c8>] (warn_slowpath_common+0x54/0x6c)
[<c0029274>] (warn_slowpath_common+0x0/0x6c) from [<c0029384>] (warn_slowpath_fmt+0x38/0x40)
[<c002934c>] (warn_slowpath_fmt+0x0/0x40) from [<c042c62c>] (gic_init_bases+0x12c/0x2ec)
[<c042c500>] (gic_init_bases+0x0/0x2ec) from [<c042cdc8>] (gic_init_irq+0x8c/0xd8)
[<c042cd3c>] (gic_init_irq+0x0/0xd8) from [<c042827c>] (init_IRQ+0x1c/0x24)
[<c0428260>] (init_IRQ+0x0/0x24) from [<c04256c8>] (start_kernel+0x1a4/0x300)
[<c0425524>] (start_kernel+0x0/0x300) from [<70008070>] (0x70008070)
---[ end trace 1b75b31a2719ed1c ]---
------------[ cut here ]------------
WARNING: at /home/rmk/git/linux-rmk/kernel/irq/irqdomain.c:234 irq_domain_add_legacy+0x80/0x140()
Modules linked in:
Backtrace:
[<c00185d8>] (dump_backtrace+0x0/0x10c) from [<c03294e8>] (dump_stack+0x18/0x1c) r6:000000ea r5:c0081a38 r4:00000000 r3:c045f240
[<c03294d0>] (dump_stack+0x0/0x1c) from [<c00292c8>] (warn_slowpath_common+0x54/0x6c)
[<c0029274>] (warn_slowpath_common+0x0/0x6c) from [<c0029304>] (warn_slowpath_null+0x24/0x2c)
[<c00292e0>] (warn_slowpath_null+0x0/0x2c) from [<c0081a38>] (irq_domain_add_legacy+0x80/0x140)
[<c00819b8>] (irq_domain_add_legacy+0x0/0x140) from [<c042c64c>] (gic_init_bases+0x14c/0x2ec)
[<c042c500>] (gic_init_bases+0x0/0x2ec) from [<c042cdc8>] (gic_init_irq+0x8c/0xd8)
[<c042cd3c>] (gic_init_irq+0x0/0xd8) from [<c042827c>] (init_IRQ+0x1c/0x24)
[<c0428260>] (init_IRQ+0x0/0x24) from [<c04256c8>] (start_kernel+0x1a4/0x300)
[<c0425524>] (start_kernel+0x0/0x300) from [<70008070>] (0x70008070)
---[ end trace 1b75b31a2719ed1d ]---
------------[ cut here ]------------
WARNING: at /home/rmk/git/linux-rmk/arch/arm/common/gic.c:762 gic_init_bases+0x170/0x2ec()
Modules linked in:
Backtrace:
[<c00185d8>] (dump_backtrace+0x0/0x10c) from [<c03294e8>] (dump_stack+0x18/0x1c) r6:000002fa r5:c042c670 r4:00000000 r3:c045f240
[<c03294d0>] (dump_stack+0x0/0x1c) from [<c00292c8>] (warn_slowpath_common+0x54/0x6c)
[<c0029274>] (warn_slowpath_common+0x0/0x6c) from [<c0029304>] (warn_slowpath_null+0x24/0x2c)
[<c00292e0>] (warn_slowpath_null+0x0/0x2c) from [<c042c670>] (gic_init_bases+0x170/0x2ec)
[<c042c500>] (gic_init_bases+0x0/0x2ec) from [<c042cdc8>] (gic_init_irq+0x8c/0xd8)
[<c042cd3c>] (gic_init_irq+0x0/0xd8) from [<c042827c>] (init_IRQ+0x1c/0x24)
[<c0428260>] (init_IRQ+0x0/0x24) from [<c04256c8>] (start_kernel+0x1a4/0x300)
[<c0425524>] (start_kernel+0x0/0x300) from [<70008070>] (0x70008070)
---[ end trace 1b75b31a2719ed1e ]---
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Punit Agrawal reports:
> I was trying to boot 3.8-rc5 on Realview EB 11MPCore using
> realview-smp_defconfig as a starting point but the kernel failed to
> progress past the log below (config attached).
>
> Pawel suggested I try reverting 384a2902 - "ARM: gic: use a private
> mapping for CPU target interfaces" that you've authored. With this
> commit reverted the kernel boots.
>
> I am not quite sure why the commit breaks 11MPCore but Pawel (cc'd)
> might be able to shed light on that.

Some early GIC implementations return zero for the first distributor
CPU routing register.  This means we can't rely on that telling us
which CPU interface we're connected to.  We know that these platforms
implement PPIs for IRQs 29-31 - but we shouldn't assume that these
will always be populated.

So, instead, scan for a non-zero CPU routing register in the first
32 IRQs and use that as our CPU mask.
Reported-by: Punit Agrawal <punit.agrawal@arm.com>
Reviewed-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Pull drm regression fix from Dave Airlie:
 "This one fixes a sleep while locked regression that was introduced
  earlier in 3.8."

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/ttm: fix fence locking in ttm_buffer_object_transfer, 2nd try

In commit 6509141f ("usbnet: add new
flag FLAG_NOARP for usb net devices"), the newly added flag NOARP was
using an already defined value, which broke drivers using flag
MULTI_PACKET.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Andrew Savchenko reported a DNS failure and we diagnosed that
some UDP sockets were unable to send more packets because their
sk_wmem_alloc was corrupted after a while (tx_queue column in
following trace)

$ cat /proc/net/udp
  sl  local_address rem_address   st tx_queue rx_queue tr tm->when retrnsmt   uid  timeout inode ref pointer drops
...
  459: 00000000:0270 00000000:0000 07 00000000:00000000 00:00000000 00000000     0        0 4507 2 ffff88003d612380 0
  466: 00000000:0277 00000000:0000 07 00000000:00000000 00:00000000 00000000     0        0 4802 2 ffff88003d613180 0
  470: 076A070A:007B 00000000:0000 07 FFFF4600:00000000 00:00000000 00000000   123        0 5552 2 ffff880039974380 0
  470: 010213AC:007B 00000000:0000 07 00000000:00000000 00:00000000 00000000     0        0 4986 2 ffff88003dbd3180 0
  470: 010013AC:007B 00000000:0000 07 00000000:00000000 00:00000000 00000000     0        0 4985 2 ffff88003dbd2e00 0
  470: 00FCA8C0:007B 00000000:0000 07 FFFFFB00:00000000 00:00000000 00000000     0        0 4984 2 ffff88003dbd2a80 0
...

Playing with skb->truesize is tricky, especially when
skb is attached to a socket, as we can fool memory charging.

Just remove this code, its not worth trying to be ultra
precise in xmit path.
Reported-by: Andrew Savchenko <bircoph@gmail.com>
Tested-by: Andrew Savchenko <bircoph@gmail.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: James Chapman <jchapman@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

For sensitive data like keying material, it is common practice to zero
out keys before returning the memory back to the allocator. Thus, use
kzfree instead of kfree.
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jesse/openvswitch into openvswitch

Jesse Gross says:

====================
One bug fix for net/3.8 for a long standing problem that was reported a few
times recently.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Ian Campbell says:

====================
The Xen netback implementation contains a couple of flaws which can
allow a guest to cause a DoS in the backend domain, potentially
affecting other domains in the system.

CVE-2013-0216 is a failure to sanity check the ring producer/consumer
pointers which can allow a guest to cause netback to loop for an
extended period preventing other work from occurring.

CVE-2013-0217 is a memory leak on an error path which is guest
triggerable.

The following series contains the fixes for these issues, as previously
included in Xen Security Advisory 39:
http://lists.xen.org/archives/html/xen-announce/2013-02/msg00001.html

Changes in v2:
 - Typo and block comment format fixes
 - Added stable Cc
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Jan Beulich <JBeulich@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Matthew Daley <mattjd@gmail.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Jan Beulich <JBeulich@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

A buggy or malicious frontend should not be able to confuse netback.
If we spot anything which is not as it should be then shutdown the
device and don't try to continue with the ring in a potentially
hostile state. Well behaved and non-hostile frontends will not be
penalised.

As well as making the existing checks for such errors fatal also add a
new check that ensures that there isn't an insane number of requests
on the ring (i.e. more than would fit in the ring). If the ring
contains garbage then previously is was possible to loop over this
insane number, getting an error each time and therefore not generating
any more pending requests and therefore not exiting the loop in
xen_netbk_tx_build_gops for an externded period.

Also turn various netdev_dbg calls which no precipitate a fatal error
into netdev_err, they are rate limited because the device is shutdown
afterwards.

This fixes at least one known DoS/softlockup of the backend domain.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Jan Beulich <JBeulich@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull virtio fix from Rusty Russell:
 "Obviously I forgot to push this before linux.conf.au..."

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
  virtio_console: Don't access uninitialized data.

Pull IB regression fixes from Roland Dreier:

 - Fix mlx4 VFs not working on old guests because of 64B CQE changes

 - Fix ill-considered sparse fix for qib

 - Fix IPoIB crash due to skb double destruct introduced in 3.8-rc1

* tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  IB/qib: Fix for broken sparse warning fix
  mlx4_core: Fix advertisement of wrong PF context behaviour
  IPoIB: Fix crash due to skb double destruct

Pull btrfs fixes from Chris Mason:
 "We've got corner cases for updating i_size that ceph was hitting,
  error handling for quotas when we run out of space, a very subtle
  snapshot deletion race, a crash while removing devices, and one
  deadlock between subvolume creation and the sb_internal code (thanks
  lockdep)."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  Btrfs: move d_instantiate outside the transaction during mksubvol
  Btrfs: fix EDQUOT handling in btrfs_delalloc_reserve_metadata
  Btrfs: fix possible stale data exposure
  Btrfs: fix missing i_size update
  Btrfs: fix race between snapshot deletion and getting inode
  Btrfs: fix missing release of the space/qgroup reservation in start_transaction()
  Btrfs: fix wrong sync_writers decrement in btrfs_file_aio_write()
  Btrfs: do not merge logged extents if we've removed them from the tree
  btrfs: don't try to notify udev about missing devices

Merge tag 'pinctrl-for-v3.8-late' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull late pinctrl fixes from Linus Walleij:
 "Two patches appeared as of late, one was completely news to me, the
  other one was rotated in -next for the next merge window but turned
  out to be a showstopper.

   - Exynos Kconfig fixup
   - SIRF DT translation bug"

* tag 'pinctrl-for-v3.8-late' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: sirf: replace of_gpio_simple_xlate by sirf specific of_xlate
  pinctrl: exynos: change PINCTRL_EXYNOS option

Merge tag 'stable/for-linus-3.8-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen

Pull Xen fixes from Konrad Rzeszutek Wilk:
 "This has two fixes.  One is a security fix wherein we would spam the
  kernel printk buffer if one of the guests was misbehaving.  The other
  is much tamer and it was us only checking for one type of error from
  the IRQ subsystem (when allocating new IRQs) instead of for all of
  them.

   - Fix an IRQ allocation where we only check for a specific error (-1).
   - CVE-2013-0231 / XSA-43.  Make xen-pciback rate limit error messages
     from xen_pcibk_enable_msi{,x}()"

* tag 'stable/for-linus-3.8-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen: fix error handling path if xen_allocate_irq_dynamic fails
  xen-pciback: rate limit error messages from xen_pcibk_enable_msi{,x}()