The SROT registers are initialised by the secure firmware at boot. We
don't have write access to the registers. Check if the block is enabled
before continuing.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

Registers have moved around across TSENS generations. For example, the
CTRL register was at offset 0x0 in the SROT region on msm8916 but is at
offset 0x4 in newer v2 based TSENS HW blocks.

Allow passing offsets of important registers so that we can continue to
use common functions.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

On platforms whose device trees specify two address spaces for TSENS, the
second one points to the SROT registers. Initialise the SROT map on those
platforms.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

The TSENS driver currently only uses a limited set of registers from the TM
address space. So it was ok to map just that set of registers and call it
"map".

We'd now like to map a second set: SROT registers to introduce new
functionality. Rename the "map" field to a more appropriate "tm_map".

The 8960 doesn't have a clear split between TM and SROT registers. To avoid
complicating the data structure, it will switchover to using tm_map for its
maps.

There is no functional change with this patch.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

hw_id is dynamically allocated but not used anywhere. Get rid of dead
code.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

The TSENS drivers use a GPL-2.0 license. Replace with equivalent SPDX
tags and delete the full license text.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

We've already converted over the devicetree of platforms using v2
version of the TSENS IP to use two address spaces. Now prepare to
convert over the 8916 and 8974 platforms to use separate SROT and TM
address spaces.

This patch will work with device trees with one or two address spaces
because we set the tm_offset in commit 5b128398 ("thermal: tsens:
Add support to split up register address space into two").
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

Add i.mx8mq specific compatible string.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

In preparation to remove the node name pointer from struct device_node,
convert printf users to use the %pOFn format specifier.

Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: linux-pm@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

Document RZ/G2M (R8A774A1) SoC bindings.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

Add r8a774a1 specific compatible string.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

A cooling map entry may now contain a list of phandles and their
arguments representing multiple devices which share the trip point.

This patch updates the thermal OF core to parse them properly. The trip
point and contribution value is shared by multiple cooling devices now
and so a new structure is created, struct __thermal_cooling_bind_param,
which represents a cooling device and its min/max states and the
existing struct __thermal_bind_params now contains an array of this new
cooling device structure.

Tested on Hikey960.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

There are three thermal stages defined in the PMIC:

stage 1: warning
stage 2: system should shut down
stage 3: emergency shut down

By default the PMIC assumes that the OS isn't doing anything and thus
at stage 2 it does a partial PMIC shutdown and at stage 3 it kills
all power. When switching between thermal stages the PMIC generates an
interrupt which is handled by the driver. The partial PMIC shutdown at
stage 2 can be disabled by software, which allows the OS to initiate a
shutdown at stage 2 with a thermal zone configured accordingly.

If a critical trip point is configured in the thermal zone the driver
adjusts the stage 1-3 temperature thresholds to (closely) match the
critical temperature with a stage 2 threshold (125/130/135/140 °C).
If a suitable match is found the partial shutdown at stage 2 is
disabled. If for some reason the system doesn't shutdown at stage 2
the emergency shutdown at stage 3 kicks in.

The partial shutdown at stage 2 remains enabled in these cases:
- no critical trip point defined
- the temperature of the critical trip point is < 125°C
- the temperature of the critical trip point is > 140°C and no
  ADC channel is configured (thus the OS is not notified when the critical
  temperature is reached)
Suggested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

The current example for a thermal zone isn't very useful as reference
since it would result in a hardware shutdown at 145°C, instead of
allowing the system to try to shutdown gracefully. Without an ADC
channel a maximum of two trip points is useful in practice for this
sensor, with temperatures corresponding to the stage 1 and stage 2
'hardware trip points'. A critical trip point at stage 2 may allow the
system to shutdown before a hardware shutdown at stage 3 kicks in. It
should be noted though that by default the chip performs a 'partial
shutdown' when the temperature reaches stage 2, which may prevent an
orderly shutdown. The 'partial shutdown' can be disabled by software.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

The documentation claims that the 'reg' property consists of two values,
the SPMI address and the length of the controller's registers. However
the SPMI bus to which it is added specifies "#size-cells = <0>;". Remove
the controller register length from the documentation of the field and the
example.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

Pull networking fixes from David Miller:

 1) Fix races in IPVS, from Tan Hu.

 2) Missing unbind in matchall classifier, from Hangbin Liu.

 3) Missing act_ife action release, from Vlad Buslov.

 4) Cure lockdep splats in ila, from Cong Wang.

 5) veth queue leak on link delete, from Toshiaki Makita.

 6) Disable isdn's IIOCDBGVAR ioctl, it exposes kernel addresses. From
    Kees Cook.

 7) RCU usage fixup in XDP, from Tariq Toukan.

 8) Two TCP ULP fixes from Daniel Borkmann.

 9) r8169 needs REALTEK_PHY as a Kconfig dependency, from Heiner
    Kallweit.

10) Always take tcf_lock with BH disabled, otherwise we can deadlock
    with rate estimator code paths. From Vlad Buslov.

11) Don't use MSI-X on RTL8106e r8169 chips, they don't resume properly.
    From Jian-Hong Pan.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (41 commits)
  ip6_vti: fix creating fallback tunnel device for vti6
  ip_vti: fix a null pointer deferrence when create vti fallback tunnel
  r8169: don't use MSI-X on RTL8106e
  net: lan743x_ptp: convert to ktime_get_clocktai_ts64
  net: sched: always disable bh when taking tcf_lock
  ip6_vti: simplify stats handling in vti6_xmit
  bpf: fix redirect to map under tail calls
  r8169: add missing Kconfig dependency
  tools/bpf: fix bpf selftest test_cgroup_storage failure
  bpf, sockmap: fix sock_map_ctx_update_elem race with exist/noexist
  bpf, sockmap: fix map elem deletion race with smap_stop_sock
  bpf, sockmap: fix leakage of smap_psock_map_entry
  tcp, ulp: fix leftover icsk_ulp_ops preventing sock from reattach
  tcp, ulp: add alias for all ulp modules
  bpf: fix a rcu usage warning in bpf_prog_array_copy_core()
  samples/bpf: all XDP samples should unload xdp/bpf prog on SIGTERM
  net/xdp: Fix suspicious RCU usage warning
  net/mlx5e: Delete unneeded function argument
  Documentation: networking: ti-cpsw: correct cbs parameters for Eth1 100Mb
  isdn: Disable IIOCDBGVAR
  ...

When set fb_tunnels_only_for_init_net to 1, don't create fallback tunnel
device for vti6 when a new namespace is created.

Tested:
[root@builder2 ~]# modprobe ip6_tunnel
[root@builder2 ~]# modprobe ip6_vti
[root@builder2 ~]# echo 1 > /proc/sys/net/core/fb_tunnels_only_for_init_net
[root@builder2 ~]# unshare -n
[root@builder2 ~]# ip link
1: lo: <LOOPBACK> mtu 65536 qdisc noop state DOWN mode DEFAULT group
default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

After set fb_tunnels_only_for_init_net to 1, the itn->fb_tunnel_dev will
be NULL and will cause following crash:

[ 2742.849298] BUG: unable to handle kernel NULL pointer dereference at 0000000000000941
[ 2742.851380] PGD 800000042c21a067 P4D 800000042c21a067 PUD 42aaed067 PMD 0
[ 2742.852818] Oops: 0002 [#1] SMP PTI
[ 2742.853570] CPU: 7 PID: 2484 Comm: unshare Kdump: loaded Not tainted 4.18.0-rc8+ #2
[ 2742.855163] Hardware name: Fedora Project OpenStack Nova, BIOS seabios-1.7.5-11.el7 04/01/2014
[ 2742.856970] RIP: 0010:vti_init_net+0x3a/0x50 [ip_vti]
[ 2742.858034] Code: 90 83 c0 48 c7 c2 20 a1 83 c0 48 89 fb e8 6e 3b f6 ff 85 c0 75 22 8b 0d f4 19 00 00 48 8b 93 00 14 00 00 48 8b 14 ca 48 8b 12 <c6> 82 41 09 00 00 04 c6 82 38 09 00 00 45 5b c3 66 0f 1f 44 00 00
[ 2742.861940] RSP: 0018:ffff9be28207fde0 EFLAGS: 00010246
[ 2742.863044] RAX: 0000000000000000 RBX: ffff8a71ebed4980 RCX: 0000000000000013
[ 2742.864540] RDX: 0000000000000000 RSI: 0000000000000013 RDI: ffff8a71ebed4980
[ 2742.866020] RBP: ffff8a71ea717000 R08: ffffffffc083903c R09: ffff8a71ea717000
[ 2742.867505] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8a71ebed4980
[ 2742.868987] R13: 0000000000000013 R14: ffff8a71ea5b49c0 R15: 0000000000000000
[ 2742.870473] FS:  00007f02266c9740(0000) GS:ffff8a71ffdc0000(0000) knlGS:0000000000000000
[ 2742.872143] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 2742.873340] CR2: 0000000000000941 CR3: 000000042bc20006 CR4: 00000000001606e0
[ 2742.874821] Call Trace:
[ 2742.875358]  ops_init+0x38/0xf0
[ 2742.876078]  setup_net+0xd9/0x1f0
[ 2742.876789]  copy_net_ns+0xb7/0x130
[ 2742.877538]  create_new_namespaces+0x11a/0x1d0
[ 2742.878525]  unshare_nsproxy_namespaces+0x55/0xa0
[ 2742.879526]  ksys_unshare+0x1a7/0x330
[ 2742.880313]  __x64_sys_unshare+0xe/0x20
[ 2742.881131]  do_syscall_64+0x5b/0x180
[ 2742.881933]  entry_SYSCALL_64_after_hwframe+0x44/0xa9

Reproduce:
echo 1 > /proc/sys/net/core/fb_tunnels_only_for_init_net
modprobe ip_vti
unshare -n

Fixes: 79134e6c ("net: do not create fallback tunnels for non-default namespaces")
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Found the ethernet network on ASUS X441UAR doesn't come back on resume
from suspend when using MSI-X.  The chip is RTL8106e - version 39.

[   21.848357] libphy: r8169: probed
[   21.848473] r8169 0000:02:00.0 eth0: RTL8106e, 0c:9d:92:32:67:b4, XID
44900000, IRQ 127
[   22.518860] r8169 0000:02:00.0 enp2s0: renamed from eth0
[   29.458041] Generic PHY r8169-200:00: attached PHY driver [Generic
PHY] (mii_bus:phy_addr=r8169-200:00, irq=IGNORE)
[   63.227398] r8169 0000:02:00.0 enp2s0: Link is Up - 100Mbps/Full -
flow control off
[  124.514648] Generic PHY r8169-200:00: attached PHY driver [Generic
PHY] (mii_bus:phy_addr=r8169-200:00, irq=IGNORE)

Here is the ethernet controller in detail:

02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller [10ec:8136]
(rev 07)
	Subsystem: ASUSTeK Computer Inc. RTL810xE PCI Express Fast
Ethernet controller [1043:200f]
	Flags: bus master, fast devsel, latency 0, IRQ 16
	I/O ports at e000 [size=256]
	Memory at ef100000 (64-bit, non-prefetchable) [size=4K]
	Memory at e0000000 (64-bit, prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: r8169
	Kernel modules: r8169

Falling back to MSI fixes the issue.

Fixes: 6c6aa15f ("r8169: improve interrupt handling")
Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

timekeeping_clocktai64() has been renamed to ktime_get_clocktai_ts64()
for consistency with the other ktime_get_* access functions.

Rename the new caller that has come up as well.

Question: this is the only ptp driver that sets the hardware time
to the current system time in TAI. Why does it do that?
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Recently, ops->init() and ops->dump() of all actions were modified to
always obtain tcf_lock when accessing private action state. Actions that
don't depend on tcf_lock for synchronization with their data path use
non-bh locking API. However, tcf_lock is also used to protect rate
estimator stats in softirq context by timer callback.

Change ops->init() and ops->dump() of all actions to disable bh when using
tcf_lock to prevent deadlock reported by following lockdep warning:

[  105.470398] ================================
[  105.475014] WARNING: inconsistent lock state
[  105.479628] 4.18.0-rc8+ #664 Not tainted
[  105.483897] --------------------------------
[  105.488511] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
[  105.494871] swapper/16/0 [HC0[0]:SC1[1]:HE1:SE0] takes:
[  105.500449] 00000000f86c012e (&(&p->tcfa_lock)->rlock){+.?.}, at: est_fetch_counters+0x3c/0xa0
[  105.509696] {SOFTIRQ-ON-W} state was registered at:
[  105.514925]   _raw_spin_lock+0x2c/0x40
[  105.519022]   tcf_bpf_init+0x579/0x820 [act_bpf]
[  105.523990]   tcf_action_init_1+0x4e4/0x660
[  105.528518]   tcf_action_init+0x1ce/0x2d0
[  105.532880]   tcf_exts_validate+0x1d8/0x200
[  105.537416]   fl_change+0x55a/0x268b [cls_flower]
[  105.542469]   tc_new_tfilter+0x748/0xa20
[  105.546738]   rtnetlink_rcv_msg+0x56a/0x6d0
[  105.551268]   netlink_rcv_skb+0x18d/0x200
[  105.555628]   netlink_unicast+0x2d0/0x370
[  105.559990]   netlink_sendmsg+0x3b9/0x6a0
[  105.564349]   sock_sendmsg+0x6b/0x80
[  105.568271]   ___sys_sendmsg+0x4a1/0x520
[  105.572547]   __sys_sendmsg+0xd7/0x150
[  105.576655]   do_syscall_64+0x72/0x2c0
[  105.580757]   entry_SYSCALL_64_after_hwframe+0x49/0xbe
[  105.586243] irq event stamp: 489296
[  105.590084] hardirqs last  enabled at (489296): [<ffffffffb507e639>] _raw_spin_unlock_irq+0x29/0x40
[  105.599765] hardirqs last disabled at (489295): [<ffffffffb507e745>] _raw_spin_lock_irq+0x15/0x50
[  105.609277] softirqs last  enabled at (489292): [<ffffffffb413a6a3>] irq_enter+0x83/0xa0
[  105.618001] softirqs last disabled at (489293): [<ffffffffb413a800>] irq_exit+0x140/0x190
[  105.626813]
               other info that might help us debug this:
[  105.633976]  Possible unsafe locking scenario:

[  105.640526]        CPU0
[  105.643325]        ----
[  105.646125]   lock(&(&p->tcfa_lock)->rlock);
[  105.650747]   <Interrupt>
[  105.653717]     lock(&(&p->tcfa_lock)->rlock);
[  105.658514]
                *** DEADLOCK ***

[  105.665349] 1 lock held by swapper/16/0:
[  105.669629]  #0: 00000000a640ad99 ((&est->timer)){+.-.}, at: call_timer_fn+0x10b/0x550
[  105.678200]
               stack backtrace:
[  105.683194] CPU: 16 PID: 0 Comm: swapper/16 Not tainted 4.18.0-rc8+ #664
[  105.690249] Hardware name: Supermicro SYS-2028TP-DECR/X10DRT-P, BIOS 2.0b 03/30/2017
[  105.698626] Call Trace:
[  105.701421]  <IRQ>
[  105.703791]  dump_stack+0x92/0xeb
[  105.707461]  print_usage_bug+0x336/0x34c
[  105.711744]  mark_lock+0x7c9/0x980
[  105.715500]  ? print_shortest_lock_dependencies+0x2e0/0x2e0
[  105.721424]  ? check_usage_forwards+0x230/0x230
[  105.726315]  __lock_acquire+0x923/0x26f0
[  105.730597]  ? debug_show_all_locks+0x240/0x240
[  105.735478]  ? mark_lock+0x493/0x980
[  105.739412]  ? check_chain_key+0x140/0x1f0
[  105.743861]  ? __lock_acquire+0x836/0x26f0
[  105.748323]  ? lock_acquire+0x12e/0x290
[  105.752516]  lock_acquire+0x12e/0x290
[  105.756539]  ? est_fetch_counters+0x3c/0xa0
[  105.761084]  _raw_spin_lock+0x2c/0x40
[  105.765099]  ? est_fetch_counters+0x3c/0xa0
[  105.769633]  est_fetch_counters+0x3c/0xa0
[  105.773995]  est_timer+0x87/0x390
[  105.777670]  ? est_fetch_counters+0xa0/0xa0
[  105.782210]  ? lock_acquire+0x12e/0x290
[  105.786410]  call_timer_fn+0x161/0x550
[  105.790512]  ? est_fetch_counters+0xa0/0xa0
[  105.795055]  ? del_timer_sync+0xd0/0xd0
[  105.799249]  ? __lock_is_held+0x93/0x110
[  105.803531]  ? mark_held_locks+0x20/0xe0
[  105.807813]  ? _raw_spin_unlock_irq+0x29/0x40
[  105.812525]  ? est_fetch_counters+0xa0/0xa0
[  105.817069]  ? est_fetch_counters+0xa0/0xa0
[  105.821610]  run_timer_softirq+0x3c4/0x9f0
[  105.826064]  ? lock_acquire+0x12e/0x290
[  105.830257]  ? __bpf_trace_timer_class+0x10/0x10
[  105.835237]  ? __lock_is_held+0x25/0x110
[  105.839517]  __do_softirq+0x11d/0x7bf
[  105.843542]  irq_exit+0x140/0x190
[  105.847208]  smp_apic_timer_interrupt+0xac/0x3b0
[  105.852182]  apic_timer_interrupt+0xf/0x20
[  105.856628]  </IRQ>
[  105.859081] RIP: 0010:cpuidle_enter_state+0xd8/0x4d0
[  105.864395] Code: 46 ff 48 89 44 24 08 0f 1f 44 00 00 31 ff e8 cf ec 46 ff 80 7c 24 07 00 0f 85 1d 02 00 00 e8 9f 90 4b ff fb 66 0f 1f 44 00 00 <4c> 8b 6c 24 08 4d 29 fd 0f 80 36 03 00 00 4c 89 e8 48 ba cf f7 53
[  105.884288] RSP: 0018:ffff8803ad94fd20 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13
[  105.892494] RAX: 0000000000000000 RBX: ffffe8fb300829c0 RCX: ffffffffb41e19e1
[  105.899988] RDX: 0000000000000007 RSI: dffffc0000000000 RDI: ffff8803ad9358ac
[  105.907503] RBP: ffffffffb6636300 R08: 0000000000000004 R09: 0000000000000000
[  105.914997] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000004
[  105.922487] R13: ffffffffb6636140 R14: ffffffffb66362d8 R15: 000000188d36091b
[  105.929988]  ? trace_hardirqs_on_caller+0x141/0x2d0
[  105.935232]  do_idle+0x28e/0x320
[  105.938817]  ? arch_cpu_idle_exit+0x40/0x40
[  105.943361]  ? mark_lock+0x8c1/0x980
[  105.947295]  ? _raw_spin_unlock_irqrestore+0x32/0x60
[  105.952619]  cpu_startup_entry+0xc2/0xd0
[  105.956900]  ? cpu_in_idle+0x20/0x20
[  105.960830]  ? _raw_spin_unlock_irqrestore+0x32/0x60
[  105.966146]  ? trace_hardirqs_on_caller+0x141/0x2d0
[  105.971391]  start_secondary+0x2b5/0x360
[  105.975669]  ? set_cpu_sibling_map+0x1330/0x1330
[  105.980654]  secondary_startup_64+0xa5/0xb0

Taking tcf_lock in sample action with bh disabled causes lockdep to issue a
warning regarding possible irq lock inversion dependency between tcf_lock,
and psample_groups_lock that is taken when holding tcf_lock in sample init:

[  162.108959]  Possible interrupt unsafe locking scenario:

[  162.116386]        CPU0                    CPU1
[  162.121277]        ----                    ----
[  162.126162]   lock(psample_groups_lock);
[  162.130447]                                local_irq_disable();
[  162.136772]                                lock(&(&p->tcfa_lock)->rlock);
[  162.143957]                                lock(psample_groups_lock);
[  162.150813]   <Interrupt>
[  162.153808]     lock(&(&p->tcfa_lock)->rlock);
[  162.158608]
                *** DEADLOCK ***

In order to prevent potential lock inversion dependency between tcf_lock
and psample_groups_lock, extract call to psample_group_get() from tcf_lock
protected section in sample action init function.

Fixes: 4e232818 ("net: sched: act_mirred: remove dependency on rtnl lock")
Fixes: 764e9a24 ("net: sched: act_vlan: remove dependency on rtnl lock")
Fixes: 729e0126 ("net: sched: act_tunnel_key: remove dependency on rtnl lock")
Fixes: d7728495 ("net: sched: act_sample: remove dependency on rtnl lock")
Fixes: e8917f43 ("net: sched: act_gact: remove dependency on rtnl lock")
Fixes: b6a2b971 ("net: sched: act_csum: remove dependency on rtnl lock")
Fixes: 2142236b ("net: sched: act_bpf: remove dependency on rtnl lock")
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull first set of KVM updates from Paolo Bonzini:
 "PPC:
   - minor code cleanups

  x86:
   - PCID emulation and CR3 caching for shadow page tables
   - nested VMX live migration
   - nested VMCS shadowing
   - optimized IPI hypercall
   - some optimizations

  ARM will come next week"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (85 commits)
  kvm: x86: Set highest physical address bits in non-present/reserved SPTEs
  KVM/x86: Use CC_SET()/CC_OUT in arch/x86/kvm/vmx.c
  KVM: X86: Implement PV IPIs in linux guest
  KVM: X86: Add kvm hypervisor init time platform setup callback
  KVM: X86: Implement "send IPI" hypercall
  KVM/x86: Move X86_CR4_OSXSAVE check into kvm_valid_sregs()
  KVM: x86: Skip pae_root shadow allocation if tdp enabled
  KVM/MMU: Combine flushing remote tlb in mmu_set_spte()
  KVM: vmx: skip VMWRITE of HOST_{FS,GS}_BASE when possible
  KVM: vmx: skip VMWRITE of HOST_{FS,GS}_SEL when possible
  KVM: vmx: always initialize HOST_{FS,GS}_BASE to zero during setup
  KVM: vmx: move struct host_state usage to struct loaded_vmcs
  KVM: vmx: compute need to reload FS/GS/LDT on demand
  KVM: nVMX: remove a misleading comment regarding vmcs02 fields
  KVM: vmx: rename __vmx_load_host_state() and vmx_save_host_state()
  KVM: vmx: add dedicated utility to access guest's kernel_gs_base
  KVM: vmx: track host_state.loaded using a loaded_vmcs pointer
  KVM: vmx: refactor segmentation code in vmx_save_host_state()
  kvm: nVMX: Fix fault priority for VMX operations
  kvm: nVMX: Fix fault vector for VMX operation at CPL > 0
  ...

Merge tag 'riscv-for-linus-4.19-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux

Pull RISC-V updates from Palmer Dabbelt:
 "This contains some major improvements to the RISC-V port, including
  the necessary interrupt controller and timer support to actually make
  it to userspace. Support for three devices has been added:

   - the ISA-mandated timers on RISC-V systems.

   - the ISA-mandated first-level interrupt controller on RISC-V
     systems, which is handled as part of our core arch code because
     it's very small and tightly tied to the ISA.

   - SiFive's platform-level interrupt controller, which talks to the
     actual devices.

  In addition to these new devices, there are a handful of cleanups all
  over the RISC-V tree:

   - build fixes for various configurations:
      * A fix to the vDSO build's makefile so it respects CFLAGS.
      * The addition of __lshrti3, a libgcc derived function necessary
        for some 32-bit configurations.
      * !SMP && PERF_EVENTS

   - Cleanups to the arch code to remove the remnants of old versions of
     the drivers that were just properly submitted.
      * Some dead code from the timer driver, most of which wasn't ever
        even compiled.
      * Cleanups of some interrupt #defines, which are now local to the
        interrupt handling code.

   - Fixes to ptrace(), which while not being sufficient to fully make
     GDB work are at least sufficient to get simple GDB tasks to work.

   - Early printk support via RISC-V's architecturally mandated SBI
     console device.

   - A fix to our early debug trap handler to ensure it's always
     aligned.

  These patches have all been through a fairly extensive review process,
  but as this enables a whole pile of functionality (ie, userspace) I'm
  confident we'll need to submit a few more patches. The only concrete
  issues I know about are the sys_riscv_flush_icache patches, but as I
  managed to screw those up on Friday I figured it'd be best to let them
  bake another week.

  This tag boots a Fedora root filesystem on QEMU's master branch for
  me, and before this morning's rebase (from 4.18-rc8 to 4.18) it booted
  on the HiFive Unleashed.

  Thanks to Christoph Hellwig and the other guys at WD for getting the
  new drivers in shape!"

* tag 'riscv-for-linus-4.19-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux:
  dt-bindings: interrupt-controller: SiFive Plaform Level Interrupt Controller
  dt-bindings: interrupt-controller: RISC-V local interrupt controller
  RISC-V: Fix !CONFIG_SMP compilation error
  irqchip: add a SiFive PLIC driver
  RISC-V: Add the directive for alignment of stvec's value
  clocksource: new RISC-V SBI timer driver
  RISC-V: implement low-level interrupt handling
  RISC-V: add a definition for the SIE SEIE bit
  RISC-V: remove INTERRUPT_CAUSE_* defines from asm/irq.h
  RISC-V: simplify software interrupt / IPI code
  RISC-V: remove timer leftovers
  RISC-V: Add early printk support via the SBI console
  RISC-V: Don't increment sepc after breakpoint.
  RISC-V: implement __lshrti3.
  RISC-V: Use KBUILD_CFLAGS instead of KCFLAGS when building the vDSO

Pull UIO fix from Greg KH:
 "Here is a single UIO fix that I forgot to send before 4.18-final came
  out. It reverts a UIO patch that went in the 4.18 development window
  that was causing problems.

  This patch has been in linux-next for a while with no problems, I just
  forgot to send it earlier, or as part of the larger char/misc patch
  series from yesterday, my fault"

* tag 'char-misc-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  Revert "uio: use request_threaded_irq instead"

Pull input updates from Dmitry Torokhov:

 - a new driver for Rohm BU21029 touch controller

 - new bitmap APIs: bitmap_alloc, bitmap_zalloc and bitmap_free

 - updates to Atmel, eeti. pxrc and iforce drivers

 - assorted driver cleanups and fixes.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (57 commits)
  MAINTAINERS: Add PhoenixRC Flight Controller Adapter
  Input: do not use WARN() in input_alloc_absinfo()
  Input: mark expected switch fall-throughs
  Input: raydium_i2c_ts - use true and false for boolean values
  Input: evdev - switch to bitmap API
  Input: gpio-keys - switch to bitmap_zalloc()
  Input: elan_i2c_smbus - cast sizeof to int for comparison
  bitmap: Add bitmap_alloc(), bitmap_zalloc() and bitmap_free()
  md: Avoid namespace collision with bitmap API
  dm: Avoid namespace collision with bitmap API
  Input: pm8941-pwrkey - add resin entry
  Input: pm8941-pwrkey - abstract register offsets and event code
  Input: iforce - reorganize joystick configuration lists
  Input: atmel_mxt_ts - move completion to after config crc is updated
  Input: atmel_mxt_ts - don't report zero pressure from T9
  Input: atmel_mxt_ts - zero terminate config firmware file
  Input: atmel_mxt_ts - refactor config update code to add context struct
  Input: atmel_mxt_ts - config CRC may start at T71
  Input: atmel_mxt_ts - remove unnecessary debug on ENOMEM
  Input: atmel_mxt_ts - remove duplicate setup of ABS_MT_PRESSURE
  ...

Pull hwspinlock updates from Bjorn Andersson:
 "This introduces devres helpers and an API to request a lock by name,
  then migrates the sprd SPI driver to use these"

* tag 'hwlock-v4.19' of git://github.com/andersson/remoteproc:
  hwspinlock: Fix incorrect return pointers
  spi: sprd: Change to use devm_hwspin_lock_request_specific()
  spi: sprd: Replace of_hwspin_lock_get_id() with of_hwspin_lock_get_id_byname()
  hwspinlock: Fix one comment mistake
  hwspinlock: Remove redundant config
  hwspinlock: Add devm_xxx() APIs to register/unregister one hwlock controller
  hwspinlock: Add devm_xxx() APIs to request/free hwlock
  hwspinlock: Add one new API to support getting a specific hwlock by the name

Pull rpmsg updates from Bjorn Andersson:
 "This fixes a few compile and kerneldoc warnings, allows rpmsg devices
  to handle power domains, allow for labeling GLINK edges and supports
  compat for rpmsg_char"

* tag 'rpmsg-v4.19' of git://github.com/andersson/remoteproc:
  rpmsg: Add compat ioctl for rpmsg char driver
  rpmsg: glink: Store edge name for glink device
  dt-bindings: soc: qcom: Add label for GLINK bindings
  rpmsg: core: add support to power domains for devices
  rpmsg: smd: fix kerneldoc warnings
  rpmsg: glink: Fix various kerneldoc warnings.
  rpmsg: glink: correctly annotate intent members
  rpmsg: smd: Add missing include of sizes.h

Pull remoteproc updates from Bjorn Andersson:
 "This adds support for pre-start and post-shutdown hooks for remoteproc
  subdevices, refactors the Qualcomm Hexagon support to allow reuse
  between several drivers, makes authentication in the MDT file loader
  optional, migrates a few format strings to use %pK and migrates the
  Davinci driver to use the reset framework"

* tag 'rproc-v4.19' of git://github.com/andersson/remoteproc:
  remoteproc/davinci: use the reset framework
  remoteproc/davinci: Mark error recovery as disabled
  remoteproc: st_slim: replace "%p" with "%pK"
  remoteproc: replace "%p" with "%pK"
  remoteproc: qcom: fix Q6V5_WCSS dependencies
  remoteproc: Reset table_ptr in rproc_start() failure paths
  remoteproc: qcom: q6v5-pil: fix modem hang on SDM845 after axis2 clk unvote
  remoteproc: qcom q6v5: fix modular build
  remoteproc: Introduce prepare and unprepare for subdevices
  remoteproc: rename subdev probe and remove functions
  remoteproc: Make client initialize ops in rproc_subdev
  remoteproc: Make start and stop in subdev optional
  remoteproc: Rename subdev functions to start/stop
  remoteproc: qcom: Introduce Hexagon V5 based WCSS driver
  remoteproc: qcom: q6v5-pil: Use common q6v5 helpers
  remoteproc: qcom: adsp: Use common q6v5 helpers
  remoteproc: q6v5: Extract common resource handling
  remoteproc: qcom: mdt_loader: Make the firmware authentication optional

Pull watchdog updates from Wim Van Sebroeck:

 - add MEN 16z069 IP-Core driver

 - renesas-wdt: add support for the R8A77990 wdt

 - stm32_iwdg: Add stm32mp1 support and pclk feature

 - sp805_wdt, orion_wdt, sprd_wdt: several improvements

 - imx2_wdt, stmp3xxx: switch to SPDX identifier

* tag 'linux-watchdog-4.19-rc1' of git://www.linux-watchdog.org/linux-watchdog:
  watchdog: fix dependencies of menz69_wdt.o
  watchdog: sp805: Add clock-frequency property
  watchdog: add driver for the MEN 16z069 IP-Core
  watchdog: sprd_wdt: Remove redundant dev_err call in sprd_wdt_probe()
  watchdog: stmp3xxx: Switch to SPDX identifier
  watchdog: imx2_wdt: Switch to SPDX identifier
  watchdog: sp805: set WDOG_HW_RUNNING when appropriate
  watchdog: sp805: add 'timeout-sec' DT property support
  dt-bindings: watchdog: Add optional 'timeout-sec' property for sp805
  dt-bindings: watchdog: Consolidate SP805 binding docs
  watchdog: orion_wdt: Mark watchdog as active when running at probe
  watchdog: stm32: add pclk feature for stm32mp1
  dt-bindings: watchdog: add stm32mp1 support
  dt-bindings: watchdog: renesas-wdt: Add support for the R8A77990 wdt

Pull DMAengine updates from Vinod Koul:
 "This round brings couple of framework changes, a new driver and usual
  driver updates:

   - new managed helper for dmaengine framework registration

   - split dmaengine pause capability to pause and resume and allow
     drivers to report that individually

   - update dma_request_chan_by_mask() to handle deferred probing

   - move imx-sdma to use virt-dma

   - new driver for Actions Semi Owl family S900 controller

   - minor updates to intel, renesas, mv_xor, pl330 etc"

* tag 'dmaengine-4.19-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (46 commits)
  dmaengine: Add Actions Semi Owl family S900 DMA driver
  dt-bindings: dmaengine: Add binding for Actions Semi Owl SoCs
  dmaengine: sh: rcar-dmac: Should not stop the DMAC by rcar_dmac_sync_tcr()
  dmaengine: mic_x100_dma: use the new helper to simplify the code
  dmaengine: add a new helper dmaenginem_async_device_register
  dmaengine: imx-sdma: add memcpy interface
  dmaengine: imx-sdma: add SDMA_BD_MAX_CNT to replace '0xffff'
  dmaengine: dma_request_chan_by_mask() to handle deferred probing
  dmaengine: pl330: fix irq race with terminate_all
  dmaengine: Revert "dmaengine: mv_xor_v2: enable COMPILE_TEST"
  dmaengine: mv_xor_v2: use {lower,upper}_32_bits to configure HW descriptor address
  dmaengine: mv_xor_v2: enable COMPILE_TEST
  dmaengine: mv_xor_v2: move unmap to before callback
  dmaengine: mv_xor_v2: convert callback to helper function
  dmaengine: mv_xor_v2: kill the tasklets upon exit
  dmaengine: mv_xor_v2: explicitly freeup irq
  dmaengine: sh: rcar-dmac: Add dma_pause operation
  dmaengine: sh: rcar-dmac: add a new function to clear CHCR.DE with barrier
  dmaengine: idma64: Support dmaengine_terminate_sync()
  dmaengine: hsu: Support dmaengine_terminate_sync()
  ...

Pull MMC updates from Ulf Hansson:
 "Updates for MMC for v4.19.

  MMC core:
   - Add some fine-grained hooks to further support HS400 tuning
   - Improve error path for bus width setting for HS400es
   - Use a common method when checking R1 status

  MMC host:
   - renesas_sdhi: Add r8a77990 support
   - renesas_sdhi: Add eMMC HS400 mode support
   - tmio/renesas_sdhi: Improve tuning/clock management
   - tmio: Add eMMC HS400 mode support
   - sunxi: Add support for 3.3V eMMC DDR mode
   - mmci: Initial support to manage variant specific callbacks
   - sdhci: Don't try 3.3V I/O voltage if not supported
   - sdhci-pci-dwc-mshc: Add driver to support Synopsys dwc mshc SDHCI PCI
   - sdhci-of-dwcmshc: Add driver to support Synopsys DWC MSHC SDHCI
   - sdhci-msm: Add support for new version sdcc V5
   - sdhci-pci-o2micro: Add support for O2 eMMC HS200 mode
   - sdhci-pci-o2micro: Add support for O2 hardware tuning
   - sdhci-pci-o2micro: Add MSI interrupt support for O2 SD host
   - sdhci-pci: Add support for Intel ICP
   - sdhci-tegra: Prevent ACMD23 and HS200 mode on Tegra 3
   - sdhci-tegra: Fix eMMC DDR52 mode
   - sdhci-tegra: Improve clock management
   - dw_mmc-rockchip: Document compatible string for px30
   - sdhci-esdhc-imx: Add support for 3.3V eMMC DDR mode
   - sdhci-of-esdhc: Set proper DMA mask for ls104x chips
   - sdhci-of-esdhc: Improve clock management
   - sdhci-of-arasan: Add a quirk to manage unstable clocks
   - dw_mmc-exynos: Address potential external abort during system resume
   - pxamci: Add support for common MMC DT bindings
   - pxamci: Several cleanups and improvements
   - pxamci: Merge immutable branch for pxa to switch to DMA slave maps"

* tag 'mmc-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (56 commits)
  mmc: core: improve reasonableness of bus width setting for HS400es
  mmc: tmio: remove unneeded variable in tmio_mmc_start_command()
  mmc: renesas_sdhi: Fix sampling clock position selecting
  mmc: tmio: Fix tuning flow
  mmc: sunxi: remove output of virtual base address
  dt-bindings: mmc: rockchip-dw-mshc: add description for px30
  mmc: renesas_sdhi: Add r8a77990 support
  mmc: sunxi: allow 3.3V DDR when DDR is available
  mmc: mmci: Add and implement a ->dma_setup() callback for qcom dml
  mmc: mmci: Initial support to manage variant specific callbacks
  mmc: tegra: Force correct divider calculation on DDR50/52
  mmc: sdhci: Add MSI interrupt support for O2 SD host
  mmc: sdhci: Add support for O2 hardware tuning
  mmc: sdhci: Export sdhci tuning function symbol
  mmc: sdhci: Change O2 Host HS200 mode clock frequency to 200MHz
  mmc: sdhci: Add support for O2 eMMC HS200 mode
  mmc: tegra: Add and use tegra_sdhci_get_max_clock()
  mmc: sdhci-esdhc-imx: fix indent
  mmc: sdhci-esdhc-imx: disable clocks before changing frequency
  mmc: tegra: prevent ACMD23 on Tegra 3
  ...

Same as ip_vti, use iptunnel_xmit_stats to updates stats in tunnel xmit
code path.
Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This function was created as a deprecated fallback case back in 2010 by
commit eb14120f ("pcmcia: re-work pcmcia_request_irq()") for legacy
cases.

Actual in-kernel users haven't been around for a long while.  The last
in-kernel user was apparently removed four years ago by commit
5f5316fc ("am2150: Update nmclan_cs.c to use update PCMCIA API").

Just remove it entirely.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

We haven't had lots of deprecation warnings lately, but the rdma use of
it made them flare up again.

They are not useful.  They annoy everybody, and nobody ever does
anything about them, because it's always "somebody elses problem".  And
when people start thinking that warnings are normal, they stop looking
at them, and the real warnings that mean something go unnoticed.

If you want to get rid of a function, just get rid of it.  Convert every
user to the new world order.

And if you can't do that, then don't annoy everybody else with your
marking that says "I couldn't be bothered to fix this, so I'll just spam
everybody elses build logs with warnings about my laziness".

Make a kernelnewbies wiki page about things that could be cleaned up,
write a blog post about it, or talk to people on the mailing lists.  But
don't add warnings to the kernel build about cleanup that you think
should happen but you aren't doing yourself.

Don't.  Just don't.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'driver-core-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core updates from Greg KH:
 "Here are all of the driver core and related patches for 4.19-rc1.

  Nothing huge here, just a number of small cleanups and the ability to
  now stop the deferred probing after init happens.

  All of these have been in linux-next for a while with only a merge
  issue reported"

* tag 'driver-core-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (21 commits)
  base: core: Remove WARN_ON from link dependencies check
  drivers/base: stop new probing during shutdown
  drivers: core: Remove glue dirs from sysfs earlier
  driver core: remove unnecessary function extern declare
  sysfs.h: fix non-kernel-doc comment
  PM / Domains: Stop deferring probe at the end of initcall
  iommu: Remove IOMMU_OF_DECLARE
  iommu: Stop deferring probe at end of initcalls
  pinctrl: Support stopping deferred probe after initcalls
  dt-bindings: pinctrl: add a 'pinctrl-use-default' property
  driver core: allow stopping deferred probe after init
  driver core: add a debugfs entry to show deferred devices
  sysfs: Fix internal_create_group() for named group updates
  base: fix order of OF initialization
  linux/device.h: fix kernel-doc notation warning
  Documentation: update firmware loader fallback reference
  kobject: Replace strncpy with memcpy
  drivers: base: cacheinfo: use OF property_read_u32 instead of get_property,read_number
  kernfs: Replace strncpy with memcpy
  device: Add #define dev_fmt similar to #define pr_fmt
  ...

Pull char/misc driver updates from Greg KH:
 "Here is the bit set of char/misc drivers for 4.19-rc1

  There is a lot here, much more than normal, seems like everyone is
  writing new driver subsystems these days... Anyway, major things here
  are:

   - new FSI driver subsystem, yet-another-powerpc low-level hardware
     bus

   - gnss, finally an in-kernel GPS subsystem to try to tame all of the
     crazy out-of-tree drivers that have been floating around for years,
     combined with some really hacky userspace implementations. This is
     only for GNSS receivers, but you have to start somewhere, and this
     is great to see.

  Other than that, there are new slimbus drivers, new coresight drivers,
  new fpga drivers, and loads of DT bindings for all of these and
  existing drivers.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (255 commits)
  android: binder: Rate-limit debug and userspace triggered err msgs
  fsi: sbefifo: Bump max command length
  fsi: scom: Fix NULL dereference
  misc: mic: SCIF Fix scif_get_new_port() error handling
  misc: cxl: changed asterisk position
  genwqe: card_base: Use true and false for boolean values
  misc: eeprom: assignment outside the if statement
  uio: potential double frees if __uio_register_device() fails
  eeprom: idt_89hpesx: clean up an error pointer vs NULL inconsistency
  misc: ti-st: Fix memory leak in the error path of probe()
  android: binder: Show extra_buffers_size in trace
  firmware: vpd: Fix section enabled flag on vpd_section_destroy
  platform: goldfish: Retire pdev_bus
  goldfish: Use dedicated macros instead of manual bit shifting
  goldfish: Add missing includes to goldfish.h
  mux: adgs1408: new driver for Analog Devices ADGS1408/1409 mux
  dt-bindings: mux: add adi,adgs1408
  Drivers: hv: vmbus: Cleanup synic memory free path
  Drivers: hv: vmbus: Remove use of slow_virt_to_phys()
  Drivers: hv: vmbus: Reset the channel callback in vmbus_onoffer_rescind()
  ...

Pull staging and IIO updates from Greg KH:
 "Here are the big staging/iio patches for 4.19-rc1.

  Lots of churn here, with tons of cleanups happening in staging
  drivers, a removal of an old crypto driver that no one was using
  (skein), and the addition of some new IIO drivers. Also added was a
  "gasket" driver from Google that needs loads of work and the erofs
  filesystem.

  Even with adding all of the new drivers and a new filesystem, we are
  only adding about 1000 lines overall to the kernel linecount, which
  shows just how much cleanup happened, and how big the unused crypto
  driver was.

  All of these have been in the linux-next tree for a while now with no
  reported issues"

* tag 'staging-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (903 commits)
  staging:rtl8192u: Remove unused macro definitions - Style
  staging:rtl8192u: Add spaces around '+' operator - Style
  staging:rtl8192u: Remove stale comment - Style
  staging: rtl8188eu: remove unused mp_custom_oid.h
  staging: fbtft: Add spaces around / - Style
  staging: fbtft: Erases some repetitive usage of function name - Style
  staging: fbtft: Adjust some empty-line problems - Style
  staging: fbtft: Removes one nesting level to help readability - Style
  staging: fbtft: Changes gamma table to define.
  staging: fbtft: A bit more information on dev_err.
  staging: fbtft: Fixes some alignment issues - Style
  staging: fbtft: Puts macro arguments in parenthesis to avoid precedence issues - Style
  staging: rtl8188eu: remove unused array dB_Invert_Table
  staging: rtl8188eu: remove whitespace, add missing blank line
  staging: rtl8188eu: use is_multicast_ether_addr in rtw_sta_mgt.c
  staging: rtl8188eu: remove whitespace - style
  staging: rtl8188eu: cleanup block comment - style
  staging: rtl8188eu: use is_multicast_ether_addr in rtl8188eu_xmit.c
  staging: rtl8188eu: use is_multicast_ether_addr in recv_linux.c
  staging: rtlwifi: refactor rtl_get_tcb_desc
  ...

Pull tty/serial driver updates from Greg KH:
 "Here is the big tty and serial driver pull request for 4.19-rc1.

  It's not all that big, just a number of small serial driver updates
  and fixes, along with some better vt handling for unicode characters
  for those using braille terminals.

  All of these patches have been in linux-next for a long time with no
  reported issues"

* tag 'tty-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (73 commits)
  tty: serial: 8250: Revert NXP SC16C2552 workaround
  serial: 8250_exar: Read INT0 from slave device, too
  tty: rocket: Fix possible buffer overwrite on register_PCI
  serial: 8250_dw: Add ACPI support for uart on Broadcom SoC
  serial: 8250_dw: always set baud rate in dw8250_set_termios
  dt-bindings: serial: Add binding for uartlite
  tty: serial: uartlite: Add support for suspend and resume
  tty: serial: uartlite: Add clock adaptation
  tty: serial: uartlite: Add structure for private data
  serial: sh-sci: Improve support for separate TEI and DRI interrupts
  serial: sh-sci: Remove SCIx_RZ_SCIFA_REGTYPE
  serial: sh-sci: Allow for compressed SCIF address
  serial: sh-sci: Improve interrupts description
  serial: 8250: Use cached port name directly in messages
  serial: 8250_exar: Drop unused variable in pci_xr17v35x_setup()
  vt: drop unused struct vt_struct
  vt: avoid a VLA in the unicode screen scroll function
  vt: add /dev/vcsu* to devices.txt
  vt: coherence validation code for the unicode screen buffer
  vt: selection: take screen contents from uniscr if available
  ...

Pull USB/PHY updates from Greg KH:
 "Here is the big USB and phy driver patch set for 4.19-rc1.

  Nothing huge but there was a lot of work that happened this
  development cycle:

   - lots of type-c work, with drivers graduating out of staging, and
     displayport support being added.

   - new PHY drivers

   - the normal collection of gadget driver updates and fixes

   - code churn to work on the urb handling path, using irqsave()
     everywhere in anticipation of making this codepath a lot simpler in
     the future.

   - usbserial driver fixes and reworks

   - other misc changes

  All of these have been in linux-next with no reported issues for a
  while"

* tag 'usb-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (159 commits)
  USB: serial: pl2303: add a new device id for ATEN
  usb: renesas_usbhs: Kconfig: convert to SPDX identifiers
  usb: dwc3: gadget: Check MaxPacketSize from descriptor
  usb: dwc2: Turn on uframe_sched on "stm32f4x9_fsotg" platforms
  usb: dwc2: Turn on uframe_sched on "amlogic" platforms
  usb: dwc2: Turn on uframe_sched on "his" platforms
  usb: dwc2: Turn on uframe_sched on "bcm" platforms
  usb: dwc2: gadget: ISOC's starting flow improvement
  usb: dwc2: Make dwc2_readl/writel functions endianness-agnostic.
  usb: dwc3: core: Enable AutoRetry feature in the controller
  usb: dwc3: Set default mode for dwc_usb31
  usb: gadget: udc: renesas_usb3: Add register of usb role switch
  usb: dwc2: replace ioread32/iowrite32_rep with dwc2_readl/writel_rep
  usb: dwc2: Modify dwc2_readl/writel functions prototype
  usb: dwc3: pci: Intel Merrifield can be host
  usb: dwc3: pci: Supply device properties via driver data
  arm64: dts: dwc3: description of incr burst type
  usb: dwc3: Enable undefined length INCR burst type
  usb: dwc3: add global soc bus configuration reg0
  usb: dwc3: Describe 'wakeup_work' field of struct dwc3_pci
  ...

Daniel Borkmann says:

====================
pull-request: bpf 2018-08-18

The following pull-request contains BPF updates for your *net* tree.

The main changes are:

1) Fix a BPF selftest failure in test_cgroup_storage due to rlimit
   restrictions, from Yonghong.

2) Fix a suspicious RCU rcu_dereference_check() warning triggered
   from removing a device's XDP memory allocator by using the correct
   rhashtable lookup function, from Tariq.

3) A batch of BPF sockmap and ULP fixes mainly fixing leaks and races
   as well as enforcing module aliases for ULPs. Another fix for BPF
   map redirect to make them work again with tail calls, from Daniel.

4) Fix XDP BPF samples to unload their programs upon SIGTERM, from Jesper.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>