- 18 May, 2012 1 commit
-
-
Rafael J. Wysocki authored
The generic PM domains core code currently requires domains to be in the "power on" state for adding devices to them, but this limitation turns out to be inconvenient in some situations, so remove it. For this purpose, make __pm_genpd_add_device() set the device's need_restore flag if the domain is in the "power off" state, so that the device's "restore state" (usually .runtime_resume()) callback is executed when it is resumed after the domain has been turned on. If the domain is in the "power on" state, the device's need_restore flag will be cleared by __pm_genpd_add_device(), so that its "save state" (usually .runtime_suspend()) callback is executed when the domain is about to be turned off. However, since that default behavior need not be always desirable, add a helper function pm_genpd_dev_need_restore() allowing a device's need_restore flag to be set/unset at any time. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
-
- 11 May, 2012 2 commits
-
-
Rafael J. Wysocki authored
The default domain power off governor function for generic PM domains, default_power_down_ok(), may violate subdomain maximum off time limit by allowing the master domain to be off for too long. Namely, it only finds the minium of all device maximum off times over the domain's devices and uses that to compute the domain's maximum off time, but it should do the same for the subdomains. Fix this problem by modifying default_power_down_ok() to compute the given domain's maximum off time as the difference between the minimum off time over all devices and subdomains in the domain and its power on latency. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
-
Huang Ying authored
Current pm_genpd_add_subdomain() will allow duplicated link between master and slave domain. This patch fixed it. Because when current pm_genpd_add_subdomain() checks whether the link between the master and slave generic PM domain already exists, slave_links instead of master_links of master domain is used. Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
-
- 05 May, 2012 2 commits
-
-
Rafael J. Wysocki authored
The results of the default device stop and domain power off governor functions for generic PM domains, default_stop_ok() and default_power_down_ok(), depend only on the timing data of devices, which are static, and on their PM QoS constraints. Thus, in theory, these functions only need to carry out their computations, which may be time consuming in general, when it is known that the PM QoS constraint of at least one of the devices in question has changed. Use the PM QoS notifiers of devices to implement that. First, introduce new fields, constraint_changed and max_off_time_changed, into struct gpd_timing_data and struct generic_pm_domain, respectively, and register a PM QoS notifier function when adding a device into a domain that will set those fields to 'true' whenever the device's PM QoS constraint is modified. Second, make default_stop_ok() and default_power_down_ok() use those fields to decide whether or not to carry out their computations from scratch. The device and PM domain hierarchies are taken into account in that and the expense is that the changes of PM QoS constraints of suspended devices will not be taken into account immediately, which isn't guaranteed anyway in general. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
-
Rafael J. Wysocki authored
The removal of a device from a PM domain doesn't have to browse the domain's device list, because it can check directly if the device belongs to the given domain. Moreover, it should clear the domain_data pointer in dev->power.subsys_data, because dev_pm_put_subsys_data(dev) may not remove dev->power.subsys_data and the stale domain data pointer may cause problems to happen. Rework pm_genpd_remove_device() taking the above observations into account. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
-
- 01 May, 2012 4 commits
-
-
Rafael J. Wysocki authored
The current behavior of dev_pm_qos_add_notifier() makes device PM QoS notifiers less than useful. Namely, it silently returns success when called before any PM QoS constraints are added for the device, so the caller will assume that the notifier has been registered, but when someone actually adds some nontrivial constraints for the device eventually, the previous callers of dev_pm_qos_add_notifier() will not know about that and their notifier routines will not be executed (contrary to their expectations). To address this problem make dev_pm_qos_add_notifier() create the constraints object for the device if it is not present when the routine is called. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by : markgross <markgross@thegnar.org>
-
Rafael J. Wysocki authored
After the previous changes in default_stop_ok() and default_power_down_ok() for PM domains, there are two fields in struct dev_pm_info that aren't necessary any more, suspend_time and max_time_suspended_ns. Remove those fields along with all of the code that accesses them, which simplifies the runtime PM framework quite a bit. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
-
Rafael J. Wysocki authored
The existing default domain power down governor function for PM domains, default_power_down_ok(), is supposed to check whether or not the PM QoS latency constraints of the devices in the domain will be violated if the domain is turned off by pm_genpd_poweroff(). However, the computations carried out by it don't reflect the definition of the PM QoS latency constrait in Documentation/ABI/testing/sysfs-devices-power. Make default_power_down_ok() follow the definition of the PM QoS latency constrait. In particular, make it only take latencies into account, because it doesn't matter how much time has elapsed since the domain's devices were suspended for the computation. Remove the break_even_ns and power_off_time fields from struct generic_pm_domain, because they are not necessary any more. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
-
Rafael J. Wysocki authored
The existing default device stop governor function for PM domains, default_stop_ok(), is supposed to check whether or not the device's PM QoS latency constraint will be violated if the device is stopped by pm_genpd_runtime_suspend(). However, the computations carried out by it don't reflect the definition of the PM QoS latency constrait in Documentation/ABI/testing/sysfs-devices-power. Make default_stop_ok() follow the definition of the PM QoS latency constrait. In particular, make it take the device's start and stop latencies correctly. Add a new field, effective_constraint_ns, to struct gpd_timing_data and use it to store the difference between the device's PM QoS constraint and its resume latency for use by the device's parent (the effective_constraint_ns values for the children are used for computing the parent's one along with its PM QoS constraint). Remove the break_even_ns field from struct gpd_timing_data, because it's not used any more. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
-
- 29 Apr, 2012 7 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull power management fixes from Rafael J. Wysocki: "Fix for an issue causing hibernation to hang on systems with highmem (that practically means i386) due to broken memory management (bug introduced in 3.2, so -stable material) and PM documentation update making the freezer documentation follow the code again after some recent updates." * tag 'pm-for-3.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM / Freezer / Docs: Update documentation about freezing of tasks PM / Hibernate: fix the number of pages used for hibernate/thaw buffering
-
Linus Torvalds authored
The autofs packet size has had a very unfortunate size problem on x86: because the alignment of 'u64' differs in 32-bit and 64-bit modes, and because the packet data was not 8-byte aligned, the size of the autofsv5 packet structure differed between 32-bit and 64-bit modes despite looking otherwise identical (300 vs 304 bytes respectively). We first fixed that up by making the 64-bit compat mode know about this problem in commit a32744d4 ("autofs: work around unhappy compat problem on x86-64"), and that made a 32-bit 'systemd' work happily on a 64-bit kernel because everything then worked the same way as on a 32-bit kernel. But it turned out that 'automount' had actually known and worked around this problem in user space, so fixing the kernel to do the proper 32-bit compatibility handling actually *broke* 32-bit automount on a 64-bit kernel, because it knew that the packet sizes were wrong and expected those incorrect sizes. As a result, we ended up reverting that compatibility mode fix, and thus breaking systemd again, in commit fcbf94b9. With both automount and systemd doing a single read() system call, and verifying that they get *exactly* the size they expect but using different sizes, it seemed that fixing one of them inevitably seemed to break the other. At one point, a patch I seriously considered applying from Michael Tokarev did a "strcmp()" to see if it was automount that was doing the operation. Ugly, ugly. However, a prettier solution exists now thanks to the packetized pipe mode. By marking the communication pipe as being packetized (by simply setting the O_DIRECT flag), we can always just write the bigger packet size, and if user-space does a smaller read, it will just get that partial end result and the extra alignment padding will simply be thrown away. This makes both automount and systemd happy, since they now get the size they asked for, and the kernel side of autofs simply no longer needs to care - it could pad out the packet arbitrarily. Of course, if there is some *other* user of autofs (please, please, please tell me it ain't so - and we haven't heard of any) that tries to read the packets with multiple writes, that other user will now be broken - the whole point of the packetized mode is that one system call gets exactly one packet, and you cannot read a packet in pieces. Tested-by: Michael Tokarev <mjt@tls.msk.ru> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: David Miller <davem@davemloft.net> Cc: Ian Kent <raven@themaw.net> Cc: Thomas Meyer <thomas@m3y3r.de> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Marcos Paulo de Souza authored
The file Documentation/power/freezing-of-tasks.txt was still referencing the TIF_FREEZE flag, that was removed by the commit d88e4cb6(freezer: remove now unused TIF_FREEZE). This patch removes all the references of TIF_FREEZE that were left behind. Signed-off-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com> Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
-
Linus Torvalds authored
The actual internal pipe implementation is already really about individual packets (called "pipe buffers"), and this simply exposes that as a special packetized mode. When we are in the packetized mode (marked by O_DIRECT as suggested by Alan Cox), a write() on a pipe will not merge the new data with previous writes, so each write will get a pipe buffer of its own. The pipe buffer is then marked with the PIPE_BUF_FLAG_PACKET flag, which in turn will tell the reader side to break the read at that boundary (and throw away any partial packet contents that do not fit in the read buffer). End result: as long as you do writes less than PIPE_BUF in size (so that the pipe doesn't have to split them up), you can now treat the pipe as a packet interface, where each read() system call will read one packet at a time. You can just use a sufficiently big read buffer (PIPE_BUF is sufficient, since bigger than that doesn't guarantee atomicity anyway), and the return value of the read() will naturally give you the size of the packet. NOTE! We do not support zero-sized packets, and zero-sized reads and writes to a pipe continue to be no-ops. Also note that big packets will currently be split at write time, but that the size at which that happens is not really specified (except that it's bigger than PIPE_BUF). Currently that limit is the system page size, but we might want to explicitly support bigger packets some day. The main user for this is going to be the autofs packet interface, allowing us to stop having to care so deeply about exact packet sizes (which have had bugs with 32/64-bit compatibility modes). But user space can create packetized pipes with "pipe2(fd, O_DIRECT)", which will fail with an EINVAL on kernels that do not support this interface. Tested-by: Michael Tokarev <mjt@tls.msk.ru> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: David Miller <davem@davemloft.net> Cc: Ian Kent <raven@themaw.net> Cc: Thomas Meyer <thomas@m3y3r.de> Cc: stable@kernel.org # needed for systemd/autofs interaction fix Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull staging tree fixes from Greg Kroah-Hartman: "Here are some tiny drivers/staging/ bugfixes. Some build fixes that were recently reported, as well as one kfree bug that is hitting a number of users." * tag 'staging-3.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: ozwpan: Fix bug where kfree is called twice. staging: octeon-ethernet: fix build errors by including interrupt.h staging: zcache: fix Kconfig crypto dependency staging: tidspbridge: remove usage of OMAP2_L4_IO_ADDRESS
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB fixes from Greg Kroah-Hartman: "Here are a number of small USB fixes for 3.4-rc5. Nothing major, as before, some USB gadget fixes. There's a crash fix for a number of ASUS laptops on resume that had been reported by a number of different people. We think the fix might also pertain to other machines, as this was a BIOS bug, and they seem to travel to different models and manufacturers quite easily. Other than that, some other reported problems fixed as well." * tag 'usb-3.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: gadget: udc-core: fix incompatibility with dummy-hcd usb: gadget: udc-core: fix wrong call order USB: cdc-wdm: fix race leading leading to memory corruption USB: EHCI: fix crash during suspend on ASUS computers usb gadget: uvc: uvc_request_data::length field must be signed usb: gadget: dummy: do not call pullup() on udc_stop() usb: musb: davinci.c: add missing unregister usb: musb: drop __deprecated flag USB: gadget: storage gadgets send wrong error code for unknown commands usb: otg: gpio_vbus: Add otg transceiver events and notifiers
-
- 28 Apr, 2012 18 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfsLinus Torvalds authored
Pull btrfs fixes from Chris Mason: "This has our collection of bug fixes. I missed the last rc because I thought our patches were making NFS crash during my xfs test runs. Turns out it was an NFS client bug fixed by someone else while I tried to bisect it. All of these fixes are small, but some are fairly high impact. The biggest are fixes for our mount -o remount handling, a deadlock due to GFP_KERNEL allocations in readdir, and a RAID10 error handling bug. This was tested against both 3.3 and Linus' master as of this morning." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (26 commits) Btrfs: reduce lock contention during extent insertion Btrfs: avoid deadlocks from GFP_KERNEL allocations during btrfs_real_readdir Btrfs: Fix space checking during fs resize Btrfs: fix block_rsv and space_info lock ordering Btrfs: Prevent root_list corruption Btrfs: fix repair code for RAID10 Btrfs: do not start delalloc inodes during sync Btrfs: fix that check_int_data mount option was ignored Btrfs: don't count CRC or header errors twice while scrubbing Btrfs: fix btrfs_ioctl_dev_info() crash on missing device btrfs: don't return EINTR Btrfs: double unlock bug in error handling Btrfs: always store the mirror we read the eb from fs/btrfs/volumes.c: add missing free_fs_devices btrfs: fix early abort in 'remount' Btrfs: fix max chunk size check in chunk allocator Btrfs: add missing read locks in backref.c Btrfs: don't call free_extent_buffer twice in iterate_irefs Btrfs: Make free_ipath() deal gracefully with NULL pointers Btrfs: avoid possible use-after-free in clear_extent_bit() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC fixes from Olof Johansson: "Nothing controversial, just another batch of fixes: - Samsung/exynos fixes for more merge window fallout: build errors and warnings mostly, but also some clock/device setup issues on exynos4/5 - PXA bug and warning fixes related to gpio and pinmux - IRQ domain conversion bugfixes for U300 and MSM - A regulator setup fix for U300" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: PXA2xx: MFP: fix potential direction bug ARM: PXA2xx: MFP: fix bug with MFP_LPM_KEEP_OUTPUT arm/sa1100: fix sa1100-rtc memory resource ARM: pxa: fix gpio wakeup setting ARM: SAMSUNG: add missing MMC_CAP2_BROKEN_VOLTAGE capability ARM: EXYNOS: Fix compilation error when CONFIG_OF is not defined ARM: EXYNOS: Fix resource on dev-dwmci.c ARM: S3C24XX: Fix build warning for S3C2410_PM ARM: mini2440_defconfig: Fix build error ARM: msm: Fix gic irqdomain support ARM: EXYNOS: Fix incorrect initialization of GIC ARM: EXYNOS: use 'exynos4-sdhci' as device name for sdhci controllers ARM: u300: bump all IRQ numbers by one ARM: ux300: Fix unimplementable regulation constraints
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm fixes from Dave Airlie: "As soon as I sent the non-urgent stack, two important fixes come in: - i915: fixes SNB GPU hangs in a number of 3D apps - radeon: initial fix for VGA on LLano system, 3 or 4 of us have spent time debugging this, and Jerome finally figured out the magic bit the BIOS/fglrx set that we didn't. This at least should get things working, there may be future reliability fixes." * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/i915: Set the Stencil Cache eviction policy to non-LRA mode. drm/radeon/kms: need to set up ss on DP bridges as well
-
Linus Torvalds authored
This reverts commit a32744d4. While that commit was technically the right thing to do, and made the x86-64 compat mode work identically to native 32-bit mode (and thus fixing the problem with a 32-bit systemd install on a 64-bit kernel), it turns out that the automount binaries had workarounds for this compat problem. Now, the workarounds are disgusting: doing an "uname()" to find out the architecture of the kernel, and then comparing it for the 64-bit cases and fixing up the size of the read() in automount for those. And they were confused: it's not actually a generic 64-bit issue at all, it's very much tied to just x86-64, which has different alignment for an 'u64' in 64-bit mode than in 32-bit mode. But the end result is that fixing the compat layer actually breaks the case of a 32-bit automount on a x86-64 kernel. There are various approaches to fix this (including just doing a "strcmp()" on current->comm and comparing it to "automount"), but I think that I will do the one that teaches pipes about a special "packet mode", which will allow user space to not have to care too deeply about the padding at the end of the autofs packet. That change will make the compat workaround unnecessary, so let's revert it first, and get automount working again in compat mode. The packetized pipes will then fix autofs for systemd. Reported-and-requested-by: Michael Tokarev <mjt@tls.msk.ru> Cc: Ian Kent <raven@themaw.net> Cc: stable@kernel.org # for 3.3 Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Kenneth Graunke authored
Clearing bit 5 of CACHE_MODE_0 is necessary to prevent GPU hangs in OpenGL programs such as Google MapsGL, Google Earth, and gzdoom when using separate stencil buffers. Without it, the GPU tries to use the LRA eviction policy, which isn't supported. This was supposed to be off by default, but seems to be on for many machines. This cannot be done in gen6_init_clock_gating with most of the other workaround bits; the render ring needs to exist. Otherwise, the register write gets dropped on the floor (one printk will show it changed, but a second printk immediately following shows the value reverts to the old one). Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=47535 Cc: stable@vger.kernel.org Cc: Rob Castle <futuredub@gmail.com> Cc: Eric Appleman <erappleman@gmail.com> Cc: aaron667@gmx.net Cc: Keith Packard <keithp@keithp.com> Signed-off-by: Kenneth Graunke <kenneth@whitecape.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Alex Deucher authored
Makes Nutmeg DP to VGA bridges work for me. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=42490 Noticed by Jerome Glisse (after weeks of debugging). Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull CIFS fixes from Steve French. * git://git.samba.org/sfrench/cifs-2.6: Use correct conversion specifiers in cifs_show_options CIFS: Show backupuid/gid in /proc/mounts cifs: fix offset handling in cifs_iovec_write
-
Linus Torvalds authored
Merge tag 'stable/for-linus-3.4-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull Xen fixes from Konrad Rzeszutek Wilk: "Some of these had been in existence since the 2.6.27 days, some since 3.0 - and some due to new features added in v3.4. The one that is most interesting is David's one - in the low-level assembler code we had be checking events needlessly. With his patch now we do it when the appropriate flag is set - with the added benefit that we can process events faster. Stefano's is fixing a mistake where the Linux IRQ numbers were ACK-ed instead of the Xen IRQ, resulting in missing interrupts. The other ones are bootup related that can show up on various hardware." - In the low-level assembler code we would jump to check events even if none were present. This incorrect behavior had been there since 2.6.27 days! - When using the fast-path for ACK-ing interrupts we were using the Linux IRQ numbers instead of the Xen ones (and they can differ) and missing interrupts in process. - Fix bootup crashes when ACPI hotplug CPUs were present and they would expand past the set number of CPUs we were allocated. - Deal with broken BIOSes when uploading C-states to the hypervisor. - Disable the cpuid check for MWAIT_LEAF if the ACPI PAD driver is loaded. If the ACPI PAD driver is used it will crash, so lets not export the functionality so the ACPI PAD driver won't load. * tag 'stable/for-linus-3.4-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen: correctly check for pending events when restoring irq flags xen/acpi: Workaround broken BIOSes exporting non-existing C-states. xen/smp: Fix crash when booting with ACPI hotplug CPUs. xen: use the pirq number to check the pirq_eoi_map xen/enlighten: Disable MWAIT_LEAF so that acpi-pad won't be loaded.
-
git://git.secretlab.ca/git/linux-2.6Linus Torvalds authored
Pull misc SPI device driver bug fixes from Grant Likely. * tag 'spi-for-linus' of git://git.secretlab.ca/git/linux-2.6: spi/spi-bfin5xx: Fix flush of last bit after each spi transfer spi/spi-bfin5xx: fix reversed if condition in interrupt mode spi/spi_bfin_sport: drop bits_per_word from client data spi/bfin_spi: drop bits_per_word from client data spi/spi-bfin-sport: move word length setup to transfer handler spi/bfin5xx: rename config macro name for bfin5xx spi controller driver spi/pl022: Allow request for higher frequency than maximum possible spi/bcm63xx: set master driver mode_bits. spi/bcm63xx: don't use the stopping state spi/bcm63xx: convert to the pump message infrastructure spi/spi-ep93xx.c: use dma_transfer_direction instead of dma_data_direction spi: fix spi.h kernel-doc warning spi/pl022: Fix calculate_effective_freq() spi/pl022: Fix range checking for bits per word
-
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-stagingLinus Torvalds authored
Pull hwmon patches from Guenter Roeck: - Fix build warning in ad7314 driver - Fix pci_device_id array access in fam15h_power driver, introduced by commit 00250ec9 ("hwmon: fam15h_power: fix bogus values with current BIOSes") * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (fam15h_power) Fix pci_device_id array hwmon: (ad7314) Fix build warning
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm fixes from Dave Airlie: "For your Friday pull request stack, nothing astounding or shattering this week some exynos, some intel, some radeon fixes. One intel fix for a regression somwehere back in 2.6.35 land." * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/radeon/kms: use frac fb div on APUs drm/radeon: add a missing entry to encoder_names drm/i915: handle input/output sdvo timings separately in mode_set drm/i915: fix integer overflow in i915_gem_do_execbuffer() drm/i915: fix integer overflow in i915_gem_execbuffer2() drm/exynos: added missed vm area region mapping type. drm/exynos: fixed exynos_drm_gem_map_pages bug. drm/exynos: fixed duplicatd memory allocation bug. drm/i915: fixup load-detect on enabled, but not active pipe
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull RCU fix from Ingo Molnar. * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: rcu: Permit call_rcu() from CPU_DYING notifiers
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Ingo Molnar. * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/apic: Use x2apic physical mode based on FADT setting x86/mrst: Quiet sparse noise about plain integer as NULL pointer x86, intel_cacheinfo: Fix error return code in amd_set_l3_disable_slot()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fixes from Ingo Molnar. * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched: Fix OOPS when build_sched_domains() percpu allocation fails sched: Fix more load-balancing fallout
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Ingo Molnar. * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf: Fix perf_event_for_each() to use sibling perf symbols: Read plt symbols from proper symtab_type binary tracing: Fix stacktrace of latency tracers (irqsoff and friends) perf tools: Add 'G' and 'H' modifiers to event parsing tracing: Fix regression with tracing_on perf tools: Drop CROSS_COMPILE from flex and bison calls perf report: Fix crash showing warning related to kernel maps tracing: Fix build breakage without CONFIG_PERF_EVENTS (again)
-
git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linuxLinus Torvalds authored
Pull build fixes for less mainstream architectures from Paul Gortmaker: "These are fixes for frv(1), blackfin(2), powerpc(1) and xtensa(4). Fortunately the touches are nearly all specific to files just used by the arch in question. The two touches to shared/common files [kernel/irq/debug.h and drivers/pci/Makefile] are trivial to assess as no risk to anyone. Half of them relate to xtensa directly. It was only when I fixed the last xtensa issue that I realized that the arch has been broken for a significant time, and isn't a specific v3.4 regression. So if you wanted, we could leave xtensa lying bleeding in the street for a couple more weeks and queue those for 3.5. But given they are no risk to anyone outside of xtensa, I figured to just leave them in. If you are OK with taking the xtensa fixes, then please pull to get: - one last implicit include uncovered by system.h that is in a file specific to just one powerpc defconfig. (I'd sync'd with BenH). - fix an oversight in the PCI makefile where shared code wasn't being compiled for ARCH=frv - fix a missing include for GPIO in blackfin framebuffer. - audit and tag endif in blackfin ezkit board file, in order to find and fix the misplaced endif masking a block of code. - fix irq/debug.h choice of temporary macro names to be more internal so they don't conflict with names used by xtensa. - fix a reference to an undeclared local var in xtensa's signal.c - fix an implicit bug.h usage in xtensa's asm/io.h uncovered by my removing bug.h from kernel.h - fix xtensa to properly indicate it is using asm-generic/hardirq.h in order to resolve the link error - undefined ack_bad_irq The xtensa still fails final link as my latest binutils does something evil when ld forward-relocates unlikely() blocks, but in theory people who have older/valid toolchains could now use the thing." * 'for-v3.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: xtensa: fix build fail on undefined ack_bad_irq blackfin: fix ifdef fustercluck in mach-bf538/boards/ezkit.c blackfin: fix compile error in bfin-lq035q1-fb.c pci: frv architecture needs generic setup-bus infrastructure irq: hide debug macros so they don't collide with others. xtensa: fix build error in xtensa/include/asm/io.h xtensa: fix build failure in xtensa/kernel/signal.c powerpc: fix system.h fallout in sysdev/scom.c [chroma_defconfig]
-
git://github.com/pmundt/linux-shLinus Torvalds authored
Pull SuperH fixes from Paul Mundt. * tag 'sh-for-linus' of git://github.com/pmundt/linux-sh: sh: Fix up tracepoint build fallout from static key introduction. sh: Fix error synchronising kernel page tables
-
git://git.samba.org/jlayton/linuxLinus Torvalds authored
Pull security key doc update from Jeff Layton: "Ordinarily, I send my patches through others' trees, but David suggested I just send this one to you directly since it's just a Documentation/ update" * 'docs-3.4' of git://git.samba.org/jlayton/linux: keys: update the documentation with info about "logon" keys
-
- 27 Apr, 2012 6 commits
-
-
David Vrabel authored
In xen_restore_fl_direct(), xen_force_evtchn_callback() was being called even if no events were pending. This resulted in (depending on workload) about a 100 times as many xen_version hypercalls as necessary. Fix this by correcting the sense of the conditional jump. This seems to give a significant performance benefit for some workloads. There is some subtle tricksy "..since the check here is trying to check both pending and masked in a single cmpw, but I think this is correct. It will call check_events now only when the combined mask+pending word is 0x0001 (aka unmasked, pending)." (Ian) CC: stable@kernel.org Acked-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
Chris Mason authored
We're spending huge amounts of time on lock contention during end_io processing because we unconditionally assume we are overwriting an existing extent in the file for each IO. This checks to see if we are outside i_size, and if so, it uses a less expensive readonly search of the btree to look for existing extents. Signed-off-by: Chris Mason <chris.mason@oracle.com>
-
Chris Mason authored
Btrfs has an optimization where it will preallocate dentries during readdir to fill in enough information to open the inode without an extra lookup. But, we're calling d_alloc, which is doing GFP_KERNEL allocations, and that leads to deadlocks because our readdir code has tree locks held. For now, disable this optimization. We'll fix the gfp mask in the next merge window. Signed-off-by: Chris Mason <chris.mason@oracle.com>
-
Scott Jiang authored
This patch ensures that the last bit of a transfer gets correctly flushed out of the register. Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
-
Scott Jiang authored
This condition is used to determine 8 bits or 16 and 32 bits transfer. Obviously it is reversed. Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
-
Scott Jiang authored
Since the member was dropped from the common Blackfin header, we need to stop using it in the SPORT driver too. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
-