The patches with fixes tags added a cast-to-void in the places when
the return value of a function was ignored.

This is not common practice in the kernel, and is therefore removed in
this patch.
Reported-by: Daniel Borkmann <daniel@iogearbox.net>
Fixes: 5750902a ("libbpf: proper XSKMAP cleanup")
Fixes: 0e6741f0 ("libbpf: fix invalid munmap call")
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

When BTF generation is enabled through CONFIG_DEBUG_INFO_BTF,
scripts/link-vmlinux.sh detects if pahole version is too old and
gracefully continues build process, skipping BTF generation build step.
But if pahole is not available, build will still fail. This patch adds
check for whether pahole exists at all and bails out gracefully, if not.

Cc: Alexei Starovoitov <ast@fb.com>
Reported-by: Yonghong Song <yhs@fb.com>
Fixes: e83b9f55 ("kbuild: add ability to generate BTF type info for vmlinux")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

The libbpf_util.h is used by xsk.h, so add it to
the install headers.
Reported-by: Ben Pfaff <blp@ovn.org>
Signed-off-by: William Tu <u9012063@gmail.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

When build perf for ARC recently, there was a build failure due to lack
of __NR_bpf.

| Auto-detecting system features:
|
| ...                     get_cpuid: [ OFF ]
| ...                           bpf: [ on  ]
|
| #  error __NR_bpf not defined. libbpf does not support your arch.
    ^~~~~
| bpf.c: In function 'sys_bpf':
| bpf.c:66:17: error: '__NR_bpf' undeclared (first use in this function)
|  return syscall(__NR_bpf, cmd, attr, size);
|                 ^~~~~~~~
|                 sys_bpf
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

tools/bpf/bpftool/.gitignore has the "bpftool" pattern, which is
intended to ignore the following build artifact:

  tools/bpf/bpftool/bpftool

However, the .gitignore entry is effective not only for the current
directory, but also for any sub-directories.

So, from the point of .gitignore grammar, the following check-in file
is also considered to be ignored:

  tools/bpf/bpftool/bash-completion/bpftool

As the manual gitignore(5) says "Files already tracked by Git are not
affected", this is not a problem as far as Git is concerned.

However, Git is not the only program that parses .gitignore because
.gitignore is useful to distinguish build artifacts from source files.

For example, tar(1) supports the --exclude-vcs-ignore option. As of
writing, this option does not work perfectly, but it intends to create
a tarball excluding files specified by .gitignore.

So, I believe it is better to fix this issue.

You can fix it by prefixing the pattern with a slash; the leading slash
means the specified pattern is relative to the current directory.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Björn Töpel says:

====================
William found two bugs, when doing socket teardown within the same
process.

The first issue was an invalid munmap call, and the second one was an
invalid XSKMAP cleanup. Both resulted in that the process kept
references to the socket, which was not correctly cleaned up. When a
new socket was created, the bind() call would fail, since the old
socket was still lingering, refusing to give up the queue on the
netdev.

More details can be found in the individual commits.

Thanks,
Björn
====================
Reviewed-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

The bpf_map_update_elem() function, when used on an XSKMAP, will fail
if not a valid AF_XDP socket is passed as value. Therefore, this is
function cannot be used to clear the XSKMAP. Instead, the
bpf_map_delete_elem() function should be used for that.

This patch also simplifies the code by breaking up
xsk_update_bpf_maps() into three smaller functions.
Reported-by: William Tu <u9012063@gmail.com>
Fixes: 1cad0788 ("libbpf: add support for using AF_XDP sockets")
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Tested-by: William Tu <u9012063@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

When unmapping the AF_XDP memory regions used for the rings, an
invalid address was passed to the munmap() calls. Instead of passing
the beginning of the memory region, the descriptor region was passed
to munmap.

When the userspace application tried to tear down an AF_XDP socket,
the operation failed and the application would still have a reference
to socket it wished to get rid of.
Reported-by: William Tu <u9012063@gmail.com>
Fixes: 1cad0788 ("libbpf: add support for using AF_XDP sockets")
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Tested-by: William Tu <u9012063@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Test test_libbpf.sh failed on my development server with failure
  -bash-4.4$ sudo ./test_libbpf.sh
  [0] libbpf: Error in bpf_object__probe_name():Operation not permitted(1).
      Couldn't load basic 'r0 = 0' BPF program.
  test_libbpf: failed at file test_l4lb.o
  selftests: test_libbpf [FAILED]
  -bash-4.4$

The reason is because my machine has 64KB locked memory by default which
is not enough for this program to get locked memory.
Similar to other bpf selftests, let us increase RLIMIT_MEMLOCK
to infinity, which fixed the issue.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

For all other error cases in queue_userspace_packet() the error is
returned, so it makes sense to do the same for these two error cases.
Reported-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Eelco Chaudron <echaudro@redhat.com>
Acked-by: Flavio Leitner <fbl@sysclose.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

rtl_write_exgmac_batch is used in only one place, so we can remove it.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Michal Kubecek says:

====================
netlink: strict attribute checking follow-up

Three follow-up patches for recent strict netlink validation series.

Patch 1 fixes dump handling for genetlink families which validate and parse
messages themselves (e.g. because they need different policies for diferent
commands).

Patch 2 sets bad_attr in extack in one place where this was omitted.

Patch 3 adds new NL_VALIDATE_NESTED flags for strict validation to enable
checking that NLA_F_NESTED value in received messages matches expectations
and includes this flag in NL_VALIDATE_STRICT. This would change userspace
visible behavior but the previous switching to NL_VALIDATE_STRICT for new
code is still only in net-next at the moment.

v2: change error messages to mention NLA_F_NESTED explicitly
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Add new validation flag NL_VALIDATE_NESTED which adds three consistency
checks of NLA_F_NESTED_FLAG:

  - the flag is set on attributes with NLA_NESTED{,_ARRAY} policy
  - the flag is not set on attributes with other policies except NLA_UNSPEC
  - the flag is set on attribute passed to nla_parse_nested()
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>

v2: change error messages to mention NLA_F_NESTED explicitly
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The check that attribute type is within 0...maxtype range in
__nla_validate_parse() sets only error message but not bad_attr in extack.
Set also bad_attr to tell userspace which attribute failed validation.
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Unlike do requests, dump genetlink requests now perform strict validation
by default even if the genetlink family does not set policy and maxtype
because it does validation and parsing on its own (e.g. because it wants to
allow different message format for different commands). While the null
policy will be ignored, maxtype (which would be zero) is still checked so
that any attribute will fail validation.

The solution is to only call __nla_validate() from genl_family_rcv_msg()
if family->maxtype is set.

Fixes: ef6243ac ("genetlink: optionally validate strictly/dumps")
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Ido Schimmel says:

====================
mlxsw: Firmware version update

This patchset updates mlxsw to use a new firmware version and adds
support for split into two ports on Spectrum-2 based systems.

Patch #1 updates the firmware version to 13.2000.1122

Patch #2 queries new resources from the firmware.

Patch #3 makes use of these resources in order to support split into two
ports on Spectrum-2 based systems. The need for these resources is
explained by Shalom:

When splitting a port, different local ports need to be mapped on different
systems. For example:

SN3700 (local_ports_in_2x=2):
  * Without split:
      front panel 1   --> local port 1
      front panel 2   --> local port 5
  * Split to 2:
      front panel 1s0 --> local port 1
      front panel 1s1 --> local port 3
      front panel 2   --> local port 5

SN3800 (local_ports_in_2x=1):
  * Without split:
      front panel 1 --> local port 1
      front panel 2 --> local port 3
  * Split to 2:
      front panel 1s0 --> local port 1
      front panel 1s1 --> local port 2
      front panel 2   --> local port 3

The local_ports_in_{1x, 2x} resources provide the offsets from the base
local ports according to which the new local ports can be calculated.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

When splitting a port, different local ports need to be mapped on different
systems. For example:

SN3700 (local_ports_in_2x=2):
  * Without split:
      front panel 1   --> local port 1
      front panel 2   --> local port 5
  * Split to 2:
      front panel 1s0 --> local port 1
      front panel 1s1 --> local port 3
      front panel 2   --> local port 5

SN3800 (local_ports_in_2x=1):
  * Without split:
      front panel 1 --> local port 1
      front panel 2 --> local port 3
  * Split to 2:
      front panel 1s0 --> local port 1
      front panel 1s1 --> local port 2
      front panel 2   --> local port 3

The local_ports_in_{1x, 2x} resources provide the offsets from the base
local ports according to which the new local ports can be calculated.
Signed-off-by: Shalom Toledo <shalomt@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since the number of local ports in 4x changed between SPC and SPC-2,
firmware expose new resources that the driver can query.
Signed-off-by: Shalom Toledo <shalomt@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The new version supports two features that are required by upcoming
changes in the driver:

* Querying of new resources allowing port split into two ports on
Spectrum-2 systems

* Querying of number of gearboxes on supported systems such as SN3800
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

TIPC link can temporarily fall into "half-establish" that only one of
the link endpoints is ESTABLISHED and starts to send traffic, PROTOCOL
messages, whereas the other link endpoint is not up (e.g. immediately
when the endpoint receives ACTIVATE_MSG, the network interface goes
down...).

This is a normal situation and will be settled because the link
endpoint will be eventually brought down after the link tolerance time.

However, the situation will become worse when the second link is
established before the first link endpoint goes down,
For example:

   1. Both links <1A-2A>, <1B-2B> down
   2. Link endpoint 2A up, but 1A still down (e.g. due to network
      disturbance, wrong session, etc.)
   3. Link <1B-2B> up
   4. Link endpoint 2A down (e.g. due to link tolerance timeout)
   5. Node B starts failover onto link <1B-2B>

   ==> Node A does never start link failover.

When the "half-failover" situation happens, two consequences have been
observed:

a) Peer link/node gets stuck in FAILINGOVER state;
b) Traffic or user messages that peer node is trying to failover onto
the second link can be partially or completely dropped by this node.

The consequence a) was actually solved by commit c140eb16 ("tipc:
fix failover problem"), but that commit didn't cover the b). It's due
to the fact that the tunnel link endpoint has never been prepared for a
failover, so the 'l->drop_point' (and the other data...) is not set
correctly. When a TUNNEL_MSG from peer node arrives on the link,
depending on the inner message's seqno and the current 'l->drop_point'
value, the message can be dropped (- treated as a duplicate message) or
processed.
At this early stage, the traffic messages from peer are likely to be
NAME_DISTRIBUTORs, this means some name table entries will be missed on
the node forever!

The commit resolves the issue by starting the FAILOVER process on this
node as well. Another benefit from this solution is that we ensure the
link will not be re-established until the failover ends.
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

I got an interesting report [0] that after resuming from hibernation
the link has 100Mbps instead of 1Gbps. Reason is that another OS has
been used whilst Linux was hibernated. And this OS speeds down the link
due to WoL. Therefore, when resuming, we shouldn't expect that what
the PHY advertises is what it did when hibernating.
Easiest way to do this is removing state PHY_RESUMING. Instead always
go via PHY_UP that configures PHY advertisement.

[0] https://bugzilla.kernel.org/show_bug.cgi?id=202851Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

When probing the phy device we set sym and asym pause in the "supported"
bitmap (unless the PHY tells us otherwise). However we don't know yet
whether the MAC supports pause. Simply copying phy->supported to
phy->advertising will trigger advertising pause, and that's not
what we want. Therefore add phy_advertise_supported() that copies all
modes but doesn't touch the pause bits.

In phy_support_(a)sym_pause we shouldn't set any bits in the supported
bitmap because we may set a bit the PHY intentionally disabled.
Effective pause support should be the AND-combined PHY and MAC pause
capabilities. If the MAC supports everything, then it's only relevant
what the PHY supports. If MAC supports sym pause only, then we have to
clear the asym bit in phydev->supported.
Copy the pause flags only and don't touch the modes, because a driver
may have intentionally removed a mode from phydev->advertising.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Make use of the struct_size() helper instead of an open-coded version
in order to avoid any potential type mistakes, in particular in the
context in which this code is being used.

So, replace code of the following form:

sizeof(*s) + s->nkeys*sizeof(struct tc_u32_key)

with:

struct_size(s, keys, s->nkeys)

This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Although devlink health report does a nice job on reporting TX
timeout and other NIC errors, unfortunately it requires drivers
to support it but currently only mlx5 has implemented it.
Before other drivers could catch up, it is useful to have a
generic tracepoint to monitor this kind of TX timeout. We have
been suffering TX timeout with different drivers, we plan to
start to monitor it with rasdaemon which just needs a new tracepoint.

Sample output:

  ksoftirqd/1-16    [001] ..s2   144.043173: net_dev_xmit_timeout: dev=ens3 driver=e1000 queue=0

Cc: Eran Ben Elisha <eranbe@mellanox.com>
Cc: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Saeed Mahameed says:

====================
mlx5-updates-2019-04-30

mlx5 misc updates:

1) Bodong Wang and Parav Pandit (6):
   - Remove unused mlx5_query_nic_vport_vlans
   - vport macros refactoring
   - Fix vport access in E-Switch
   - Use atomic rep state to serialize state change

2) Eli Britstein (2):
   - prio tag mode support, added ACLs and replace TC vlan pop with
     vlan 0 rewrite when prio tag mode is enabled.

3) Erez Alfasi (2):
   - ethtool: Add SFF-8436 and SFF-8636 max EEPROM length definitions
   - mlx5e: ethtool, Add support for EEPROM high pages query

4) Masahiro Yamada (1):
   - remove meaningless CFLAGS_tracepoint.o

5) Maxim Mikityanskiy (1):
   - Put the common XDP code into a function

6) Tariq Toukan (2):
   - Turn on HW tunnel offload in all TIRs

7) Vlad Buslov (1):
   - Return error when trying to insert existing flower filter
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Jeff Kirsher says:

====================
100GbE Intel Wired LAN Driver Updates 2019-05-02

This series contains updates to the ice driver only.

Anirudh introduces the framework to store queue specific information in
the VSI queue contexts.  This will allow future changes to update the
structure to hold queue specific information.

Akeem adds additional check so that if there is no queue to disable when
attempting to disable a queue, return a configuration error without
acquiring the lock.  Fixed an issue with non-trusted VFs being able to
add more than the permitted number of VLANs.

Bruce removes unreachable code and updated the function to return void
since it would never return anything but success.

Brett provides most of the changes in the series, starting with reducing
the scope of the error variable used and improved the debug message if
we fail to configure the receive queue.  Updates the driver to use a
macro instead of using the same 'for' loop throughout the driver which
helps with readability.  Fixed an issue where users were led to believe
they could set rx-usecs-high value, yet the changes to this value would
not stick because it was not yet implemented to allow changes to this
value, so implement the missing code to change the value.  Found we had
unnecessary wait when disabling queues, so remove it.  I,proved a
wasteful addition operation in our hot path by adding a member to the
ice_q_vector structure and the necessary changes to use the member which
stores the calculated vector hardware index.  Refactored the link event
flow to make it cleaner and more clear.

Maciej updates the array index when stopping transmit rings, so that
process every ring the VSI, not just the rings in a given transmit
class.

Paul adds support for setting 52 byte RSS hash keys.

Md Fahad cleaned up a runtime change to the PFINT_OICR_ENA register,
since the interrupt handlers will handle resetting the bit, if
necessary.

Tony adds a missing PHY type, which was causing warning message about an
unrecognized PHY.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Make use of the struct_size() helper instead of an open-coded version
in order to avoid any potential type mistakes, in particular in the
context in which this code is being used.

So, replace code of the following form:

sizeof(*tx_msg) + le16_to_cpu(tx_msg->num_pls) * sizeof(tx_msg->pld[0]);

with:

struct_size(tx_msg, pld, le16_to_cpu(tx_msg->num_pls));

This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jian Shen says:

====================
net: hns3: enhance capabilities for fibre port

This patchset enhances more capabilities for fibre port,
include multipe media type identification, autoneg,
change port speed and FEC encoding.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds support for FEC encoding control, user can change
FEC mode by command ethtool --set-fec, and get FEC mode by command
ethtool --show-fec. The fec capability is changed follow the port
speed. If autoneg on, the user configure fec mode will be overwritten
by autoneg result.
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Previously, our driver only supports phydev to autoneg or change
port speed. This patch adds support for fibre port, driver gets
media speed capability and autoneg capability from firmware. If
the media supports multiple speeds, user can change port speed
with command "ethtool -s <devname> speed xxxx autoneg off duplex
full". If autoneg on, the user configuration may be overwritten
by the autoneg result.
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Previously, we can only identify copper and fiber type, the
supported link modes of port information are always showing
SR type. This patch adds support for multiple media types,
include SR, LR CR, KR. Driver needs to query the media type
from firmware periodicly, and updates the port information.

The new port information looks like this:
Settings for eth0:
        Supported ports: [ FIBRE ]
        Supported link modes:   25000baseCR/Full
                                25000baseSR/Full
                                1000baseX/Full
                                10000baseCR/Full
                                10000baseSR/Full
                                10000baseLR/Full
        Supported pause frame use: Symmetric
        Supports auto-negotiation: No
        Supported FEC modes: None BaseR
        Advertised link modes:  Not reported
        Advertised pause frame use: No
        Advertised auto-negotiation: No
        Advertised FEC modes: Not reported
        Speed: 10000Mb/s
        Duplex: Full
        Port: FIBRE
        PHYAD: 0
        Transceiver: internal
        Auto-negotiation: off
        Current message level: 0x00000036 (54)
                               probe link ifdown ifup
        Link detected: yes

In order to be compatible with old firmware which only support
sfp speed, we remained using the same query command, and kept
the former logic.
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipheth_carrier_set() is called from two locations. In
ipheth_carrier_check_work(), its parameter 'dev' is set with
container_of(work, ...) and can not be NULL. In ipheth_open(),
dev is extracted from netdev_priv(net) and dereferenced before
the call to ipheth_carrier_set(). The NULL pointer check of dev
in ipheth_carrier_set() is therefore unnecessary and can be removed.

Cc: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Allow an interrupt number to be passed in the platform data. The
driver will then use it if not zero, otherwise it will poll for
interrupts.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Andrew Lunn says:

====================
mv88e6xxx: Disable ports to save power

Save some power by disabling ports. The first patch fully disables a
port when it is runtime disabled. The second disables any ports which
are not used at all.

Depending on configuration strapping, this can lower the temperature
of an idle switch a few degrees.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

If the NO_CPU strap is set, the switch starts in 'dumb hub' mode, with
all ports enable. Ports which are then actively used are reconfigured
as required when the driver starts. However unused ports are left
alone. Change this to disable them, and turn off any SERDES
interface. This could save some power and so reduce the temperature a
bit.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When requested to disable a port, set the port STP state to disabled.
This fully disables the port and should save some power.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jeff Kirsher says:

====================
40GbE Intel Wired LAN Driver Updates 2019-05-03

This series contains updates to the i40e driver only.

Carolyn changes the driver behavior to now disable the VF after one MDD
event instead of allowing a couple of MDD events before doing the reset.

Aleksandr changes the driver to only report an error when a VF tries to
remove VLAN when a port VLAN is configured, unless it is VLAN 0.  Also
extends the LLDP support to be able to keep the current LLDP state
persistent across a power cycle.

Maciej fixes the checksum calculation due to firmware changes, which
requires the driver to perform a double shadow RAM dump in some cases.

Adam adds advertising support for 40GBase_LR4, 40GBase_CR4 and fibre in
the driver.

Jake cleans up a check that is not needed and was producing a warning in
GCC 8.

Harshitha fixes a misleading message by ensuring that a success message
is only printed on the host side when the promiscuous mode change has
been successful.

Stefan Assmann adds the vendor id and device id to the dmesg log entry
during probe to help with bug reports when lspci output may not be
available.

Alice and Piotr add recovery mode support in the i40e driver, which is
needed for migrating from a structured to a flat firmware image.

v2: Removed patch 1 "i40e: replace switch-statement to speed-up
    retpoline-enabled builds" from the series since it is no longer
    needed.  Also updated the last patch in the series that introduces
    recovery mode support, to include a more detailed patch description
    and removed code not intended for the upstream kernel.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch introduces "recovery mode" to the i40e driver. It is
part of a new Any2Any idea of upgrading the firmware. In this
approach, it is required for the driver to have support for
"transition firmware", that is used for migrating from structured
to flat firmware image. In this new, very basic mode, i40e driver
must be able to handle particular IOCTL calls from the NVM Update
Tool and run a small set of AQ commands.

These additional AQ commands are part of the interface used by
the NVMUpdate tool.  The NVMUpdate tool contains all of the
necessary logic to reference these new AQ commands.  The end user
experience remains the same, they are using the NVMUpdate tool to
update the NVM contents.
Signed-off-by: Alice Michael <alice.michael@intel.com>
Signed-off-by: Piotr Marczak <piotr.marczak@intel.com>
Tested-by: Don Buchholz <donald.buchholz@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Printing each devices PCI vendor and device ID has the advantage of
easily revealing what hardware we're dealing with exactly. It's no
longer necessary to match the PCI bus information to the lspci output.

Helps with bug reports where no lspci output is available.

Output before
i40e 0000:08:00.0: fw 6.1.49420 api 1.7 nvm 6.80 0x80003c64 1.2007.0
and after
i40e 0000:08:00.0: fw 6.1.49420 api 1.7 nvm 6.80 0x80003c64 1.2007.0 [8086:1572] [8086:0004]
Signed-off-by: Stefan Assmann <sassmann@kpanic.de>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>