- 28 Oct, 2019 2 commits
-
-
Potnuri Bharat Teja authored
_put_ep_safe() and _put_pass_ep_safe() free the skb before it is freed by process_work(). fix double free by freeing the skb only in process_work(). Fixes: 1dad0ebe ("iw_cxgb4: Avoid touch after free error in ARP failure handlers") Link: https://lore.kernel.org/r/1572006880-5800-1-git-send-email-bharat@chelsio.comSigned-off-by:
Dakshaja Uppalapati <dakshaja@chelsio.com> Signed-off-by:
Potnuri Bharat Teja <bharat@chelsio.com> Reviewed-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Jason Gunthorpe authored
The mkey_table xarray is touched by the reg_mr_callback() function which is called from a hard irq. Thus all other uses of xa_lock must use the _irq variants. WARNING: inconsistent lock state 5.4.0-rc1 #12 Not tainted -------------------------------- inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage. python3/343 [HC0[0]:SC0[0]:HE1:SE1] takes: ffff888182be1d40 (&(&xa->xa_lock)->rlock#3){?.-.}, at: xa_erase+0x12/0x30 {IN-HARDIRQ-W} state was registered at: lock_acquire+0xe1/0x200 _raw_spin_lock_irqsave+0x35/0x50 reg_mr_callback+0x2dd/0x450 [mlx5_ib] mlx5_cmd_exec_cb_handler+0x2c/0x70 [mlx5_core] mlx5_cmd_comp_handler+0x355/0x840 [mlx5_core] [..] Possible unsafe locking scenario: CPU0 ---- lock(&(&xa->xa_lock)->rlock#3); <Interrupt> lock(&(&xa->xa_lock)->rlock#3); *** DEADLOCK *** 2 locks held by python3/343: #0: ffff88818eb4bd38 (&uverbs_dev->disassociate_srcu){....}, at: ib_uverbs_ioctl+0xe5/0x1e0 [ib_uverbs] #1: ffff888176c76d38 (&file->hw_destroy_rwsem){++++}, at: uobj_destroy+0x2d/0x90 [ib_uverbs] stack backtrace: CPU: 3 PID: 343 Comm: python3 Not tainted 5.4.0-rc1 #12 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 Call Trace: dump_stack+0x86/0xca print_usage_bug.cold.50+0x2e5/0x355 mark_lock+0x871/0xb50 ? match_held_lock+0x20/0x250 ? check_usage_forwards+0x240/0x240 __lock_acquire+0x7de/0x23a0 ? __kasan_check_read+0x11/0x20 ? mark_lock+0xae/0xb50 ? mark_held_locks+0xb0/0xb0 ? find_held_lock+0xca/0xf0 lock_acquire+0xe1/0x200 ? xa_erase+0x12/0x30 _raw_spin_lock+0x2a/0x40 ? xa_erase+0x12/0x30 xa_erase+0x12/0x30 mlx5_ib_dealloc_mw+0x55/0xa0 [mlx5_ib] uverbs_dealloc_mw+0x3c/0x70 [ib_uverbs] uverbs_free_mw+0x1a/0x20 [ib_uverbs] destroy_hw_idr_uobject+0x49/0xa0 [ib_uverbs] [..] Fixes: 04177915 ("RDMA/mlx5: Add missing synchronize_srcu() for MW cases") Link: https://lore.kernel.org/r/20191024234910.GA9038@ziepe.caAcked-by:Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
-
- 24 Oct, 2019 2 commits
-
-
Parav Pandit authored
When rdmacm module is not loaded, and when netlink message is received to get char device info, it results into a deadlock due to recursive locking of rdma_nl_mutex with the below call sequence. [..] rdma_nl_rcv() mutex_lock() [..] rdma_nl_rcv_msg() ib_get_client_nl_info() request_module() iw_cm_init() rdma_nl_register() mutex_lock(); <- Deadlock, acquiring mutex again Due to above call sequence, following call trace and deadlock is observed. kernel: __mutex_lock+0x35e/0x860 kernel: ? __mutex_lock+0x129/0x860 kernel: ? rdma_nl_register+0x1a/0x90 [ib_core] kernel: rdma_nl_register+0x1a/0x90 [ib_core] kernel: ? 0xffffffffc029b000 kernel: iw_cm_init+0x34/0x1000 [iw_cm] kernel: do_one_initcall+0x67/0x2d4 kernel: ? kmem_cache_alloc_trace+0x1ec/0x2a0 kernel: do_init_module+0x5a/0x223 kernel: load_module+0x1998/0x1e10 kernel: ? __symbol_put+0x60/0x60 kernel: __do_sys_finit_module+0x94/0xe0 kernel: do_syscall_64+0x5a/0x270 kernel: entry_SYSCALL_64_after_hwframe+0x49/0xbe process stack trace: [<0>] __request_module+0x1c9/0x460 [<0>] ib_get_client_nl_info+0x5e/0xb0 [ib_core] [<0>] nldev_get_chardev+0x1ac/0x320 [ib_core] [<0>] rdma_nl_rcv_msg+0xeb/0x1d0 [ib_core] [<0>] rdma_nl_rcv+0xcd/0x120 [ib_core] [<0>] netlink_unicast+0x179/0x220 [<0>] netlink_sendmsg+0x2f6/0x3f0 [<0>] sock_sendmsg+0x30/0x40 [<0>] ___sys_sendmsg+0x27a/0x290 [<0>] __sys_sendmsg+0x58/0xa0 [<0>] do_syscall_64+0x5a/0x270 [<0>] entry_SYSCALL_64_after_hwframe+0x49/0xbe To overcome this deadlock and to allow multiple netlink messages to progress in parallel, following scheme is implemented. 1. Split the lock protecting the cb_table into a per-index lock, and make it a rwlock. This lock is used to ensure no callbacks are running after unregistration returns. Since a module will not be registered once it is already running callbacks, this avoids the deadlock. 2. Use smp_store_release() to update the cb_table during registration so that no lock is required. This avoids lockdep problems with thinking all the rwsems are the same lock class. Fixes: 0e2d00eb ("RDMA: Add NLDEV_GET_CHARDEV to allow char dev discovery and autoload") Link: https://lore.kernel.org/r/20191015080733.18625-1-leon@kernel.orgSigned-off-by:Parav Pandit <parav@mellanox.com> Signed-off-by:
-
Mark Zhang authored
The counter resource should return -EAGAIN if it was requested for a different port, this is similar to how QP works if the users provides a port filter. Otherwise port filtering in netlink will return broken counter nests. Fixes: c4ffee7c ("RDMA/netlink: Implement counter dumpit calback") Link: https://lore.kernel.org/r/20191020062800.8065-1-leon@kernel.orgSigned-off-by:
Mark Zhang <markz@mellanox.com> Signed-off-by:
-
- 22 Oct, 2019 1 commit
-
-
Dan Carpenter authored
The issue is in drivers/infiniband/core/uverbs_std_types_cq.c in the UVERBS_HANDLER(UVERBS_METHOD_CQ_CREATE) function. We check that: if (attr.comp_vector >= attrs->ufile->device->num_comp_vectors) { But we don't check if "attr.comp_vector" is negative. It could potentially lead to an array underflow. My concern would be where cq->vector is used in the create_cq() function from the cxgb4 driver. And really "attr.comp_vector" is appears as a u32 to user space so that's the right type to use. Fixes: 9ee79fce ("IB/core: Add completion queue (cq) object actions") Link: https://lore.kernel.org/r/20191011133419.GA22905@mwandaSigned-off-by:Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
-
- 18 Oct, 2019 5 commits
-
-
Parav Pandit authored
Current code tries to derive VLAN ID and compares it with GID attribute for matching entry. This raw search fails on macvlan netdevice as its not a VLAN device, but its an upper device of a VLAN netdevice. Due to this limitation, incoming QP1 packets fail to match in the GID table. Such packets are dropped. Hence, to support it, use the existing rdma_read_gid_l2_fields() that takes care of diffferent device types. Fixes: dbf727de ("IB/core: Use GID table in AH creation and dmac resolution") Signed-off-by:
Doug Ledford <dledford@redhat.com>
-
Kamal Heib authored
Remove spaces from the reported firmware version string. Actual value: $ cat /sys/class/infiniband/qedr0/fw_ver 8. 37. 7. 0 Expected value: $ cat /sys/class/infiniband/qedr0/fw_ver 8.37.7.0 Fixes: ec72fce4 ("qedr: Add support for RoCE HW init") Signed-off-by:
Kamal Heib <kamalheib1@gmail.com> Acked-by: Michal Kalderon <michal.kalderon@marvell.com> Link: https://lore.kernel.org/r/20191007210730.7173-1-kamalheib1@gmail.comSigned-off-by:
-
Krishnamraju Eraparaju authored
As siw_free_qp() is the last routine to access 'siw_base_qp' structure, freeing this structure early in siw_destroy_qp() could cause touch-after-free issue. Hence, moved kfree(siw_base_qp) from siw_destroy_qp() to siw_free_qp(). Fixes: 303ae1cd ("rdma/siw: application interface") Signed-off-by:
Krishnamraju Eraparaju <krishna2@chelsio.com> Link: https://lore.kernel.org/r/20191007104229.29412-1-krishna2@chelsio.comSigned-off-by:
-
Krishnamraju Eraparaju authored
kref release routines usually perform memory release operations, hence, they should not be called with spinlocks held. one such case is: SIW kref release routine siw_free_qp(), which can sleep via vfree() while freeing queue memory. Hence, all iw_rem_ref() calls in IWCM are moved out of spinlocks. Fixes: 922a8e9f ("RDMA: iWARP Connection Manager.") Signed-off-by:
Bernard Metzler <bmt@zurich.ibm.com> Link: https://lore.kernel.org/r/20191007102627.12568-1-krishna2@chelsio.comSigned-off-by:
-
Potnuri Bharat Teja authored
pass_accept_req() is using the same skb for handling accept request and sending accept reply to HW. Here req and rpl structures are pointing to same skb->data which is over written by INIT_TP_WR() and leads to accessing corrupt req fields in accept_cr() while checking for ECN flags. Reordered code in accept_cr() to fetch correct req fields. Fixes: 92e7ae71 ("iw_cxgb4: Choose appropriate hw mtu index and ISS for iWARP connections") Signed-off-by:
-
- 17 Oct, 2019 3 commits
-
-
Mike Marciniszyn authored
There is no reason for a different pad buffer for the two packet types. Expand the current buffer allocation to allow for both packet types. Fixes: f8195f3b ("IB/hfi1: Eliminate allocation while atomic") Reported-by:
Kaike Wan <kaike.wan@intel.com> Reviewed-by:
Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by:
-
Kaike Wan authored
A TID RDMA READ request could be retried under one of the following conditions: - The RC retry timer expires; - A later TID RDMA READ RESP packet is received before the next expected one. For the latter, under normal conditions, the PSN in IB space is used for comparison. More specifically, the IB PSN in the incoming TID RDMA READ RESP packet is compared with the last IB PSN of a given TID RDMA READ request to determine if the request should be retried. This is similar to the retry logic for noraml RDMA READ request. However, if a TID RDMA READ RESP packet is lost due to congestion, header suppresion will be disabled and each incoming packet will raise an interrupt until the hardware flow is reloaded. Under this condition, each packet KDETH PSN will be checked by software against r_next_psn and a retry will be requested if the packet KDETH PSN is later than r_next_psn. Since each TID RDMA READ segment could have up to 64 packets and each TID RDMA READ request could have many segments, we could make far more retries under such conditions, and thus leading to RETRY_EXC_ERR status. This patch fixes the issue by removing the retry when the incoming packet KDETH PSN is later than r_next_psn. Instead, it resorts to RC timer and normal IB PSN comparison for any request retry. Fixes: 9905bf06 ("IB/hfi1: Add functions to receive TID RDMA READ response") Cc: <stable@vger.kernel.org> Reviewed-by:
-
Rafi Wiener authored
Before QP is closed it changes to ERROR state, when this happens the QP was left with old rate limit that was already removed from the table. Fixes: 7d29f349 ("IB/mlx5: Properly adjust rate limit on QP state transitions") Signed-off-by:
Rafi Wiener <rafiw@mellanox.com> Signed-off-by:
Oleg Kuporosov <olegk@mellanox.com> Signed-off-by:
-
- 04 Oct, 2019 12 commits
-
-
Jason Gunthorpe authored
While MR uses live as the SRCU 'update', the MW case uses the xarray directly, xa_erase() causes the MW to become inaccessible to the pagefault thread. Thus whenever a MW is removed from the xarray we must synchronize_srcu() before freeing it. This must be done before freeing the mkey as re-use of the mkey while the pagefault thread is using the stale mkey is undesirable. Add the missing synchronizes to MW and DEVX indirect mkey and delete the bogus protection against double destroy in mlx5_core_destroy_mkey() Fixes: 534fd7aa ("IB/mlx5: Manage indirection mkey upon DEVX flow for ODP") Fixes: 6aec21f6 ("IB/mlx5: Page faults handling infrastructure") Link: https://lore.kernel.org/r/20191001153821.23621-7-jgg@ziepe.caReviewed-by:
Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by:
-
Jason Gunthorpe authored
live is used to signal to the pagefault thread that the MR is initialized and ready for use. It should be after the umem is assigned and all other setup is completed. This prevents races (at least) of the form: CPU0 CPU1 mlx5_ib_alloc_implicit_mr() implicit_mr_alloc() live = 1 imr->umem = umem num_pending_prefetch_inc() if (live) atomic_inc(num_pending_prefetch) atomic_set(num_pending_prefetch,0) // Overwrites other thread's store Further, live is being used with SRCU as the 'update' in an acquire/release fashion, so it can not be read and written raw. Move all live = 1's to after MR initialization is completed and use smp_store_release/smp_load_acquire() for manipulating it. Add a missing live = 0 when an implicit MR child is deleted, before queuing work to do synchronize_srcu(). The barriers in update_odp_mr() were some broken attempt to create a acquire/release, but were not even applied consistently and missed the point, delete it as well. Fixes: 6aec21f6 ("IB/mlx5: Page faults handling infrastructure") Link: https://lore.kernel.org/r/20191001153821.23621-6-jgg@ziepe.caReviewed-by: -
Jason Gunthorpe authored
During destroy setting live = 0 and then synchronize_srcu() prevents num_pending_prefetch from incrementing, and also, ensures that all work holding that count is queued on the WQ. Testing before causes races of the form: CPU0 CPU1 dereg_mr() mlx5_ib_advise_mr_prefetch() srcu_read_lock() num_pending_prefetch_inc() if (!live) live = 0 atomic_read() == 0 // skip flush_workqueue() atomic_inc() queue_work(); srcu_read_unlock() WARN_ON(atomic_read()) // Fails Swap the order so that the synchronize_srcu() prevents this. Fixes: a6bc3875 ("IB/mlx5: Protect against prefetch of invalid MR") Link: https://lore.kernel.org/r/20191001153821.23621-5-jgg@ziepe.caReviewed-by: -
Jason Gunthorpe authored
This fixes a race of the form: CPU0 CPU1 mlx5_ib_invalidate_range() mlx5_ib_invalidate_range() // This one actually makes npages == 0 ib_umem_odp_unmap_dma_pages() if (npages == 0 && !dying) // This one does nothing ib_umem_odp_unmap_dma_pages() if (npages == 0 && !dying) dying = 1; dying = 1; schedule_work(&umem_odp->work); // Double schedule of the same work schedule_work(&umem_odp->work); // BOOM npages and dying must be read and written under the umem_mutex lock. Since whenever ib_umem_odp_unmap_dma_pages() is called mlx5 must also call mlx5_ib_update_xlt, and both need to be done in the same locking region, hoist the lock out of unmap. This avoids an expensive double critical section in mlx5_ib_invalidate_range(). Fixes: 81713d37 ("IB/mlx5: Add implicit MR support") Link: https://lore.kernel.org/r/20191001153821.23621-4-jgg@ziepe.caReviewed-by: -
Jason Gunthorpe authored
mlx5_ib_update_xlt() must be protected against parallel free of the MR it is accessing, also it must be called single threaded while updating the HW. Otherwise we can have races of the form: CPU0 CPU1 mlx5_ib_update_xlt() mlx5_odp_populate_klm() odp_lookup() == NULL pklm = ZAP implicit_mr_get_data() implicit_mr_alloc() <update interval tree> mlx5_ib_update_xlt mlx5_odp_populate_klm() odp_lookup() != NULL pklm = VALID mlx5_ib_post_send_wait() mlx5_ib_post_send_wait() // Replaces VALID with ZAP This can be solved by putting both the SRCU and the umem_mutex lock around every call to mlx5_ib_update_xlt(). This ensures that the content of the interval tree relavent to mlx5_odp_populate_klm() (ie mr->parent == mr) will not change while it is running, and thus the posted WRs to update the KLM will always reflect the correct information. The race above will resolve by either having CPU1 wait till CPU0 completes the ZAP or CPU0 will run after the add and instead store VALID. The pagefault path adding children already holds the umem_mutex and SRCU, so the only missed lock is during MR destruction. Fixes: 81713d37 ("IB/mlx5: Add implicit MR support") Link: https://lore.kernel.org/r/20191001153821.23621-3-jgg@ziepe.caReviewed-by: -
Jason Gunthorpe authored
This code is completely broken, the umem of a ODP MR simply cannot be discarded without a lot more locking, nor can an ODP mkey be blithely destroyed via destroy_mkey(). Fixes: 6aec21f6 ("IB/mlx5: Page faults handling infrastructure") Link: https://lore.kernel.org/r/20191001153821.23621-2-jgg@ziepe.caReviewed-by:
-
Mohamad Heib authored
rdma_for_each_port is already incrementing the iterator's value it receives therefore, after the first iteration the iterator is increased by 2 which eventually causing wrong queries and possible traces. Fix the above by removing the old redundant incrementation that was used before rdma_for_each_port() macro. Cc: <stable@vger.kernel.org> Fixes: ea1075ed ("RDMA: Add and use rdma_for_each_port") Link: https://lore.kernel.org/r/20191002122127.17571-1-leon@kernel.orgSigned-off-by:
Mohamad Heib <mohamadh@mellanox.com> Reviewed-by:
Erez Alfasi <ereza@mellanox.com> Signed-off-by:
-
Leon Romanovsky authored
Properly unwind QP counter rebinding in case of failure. Trying to rebind the counter after unbiding it is not going to work reliably, move the unbind to the end so it doesn't have to be unwound. Fixes: b389327d ("RDMA/nldev: Allow counter manual mode configration through RDMA netlink") Link: https://lore.kernel.org/r/20191002115627.16740-1-leon@kernel.orgReviewed-by:
-
Greg KH authored
Nicolas pointed out that the cxgb4 driver is doing dma off of the stack, which is generally considered a very bad thing. On some architectures it could be a security problem, but odds are none of them actually run this driver, so it's just a "normal" bug. Resolve this by allocating the memory for a message off of the heap instead of the stack. kmalloc() always will give us a proper memory location that DMA will work correctly from. Link: https://lore.kernel.org/r/20191001165611.GA3542072@kroah.comReported-by:
Nicolas Waisman <nico@semmle.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Tested-by:
-
Jack Morgenstein authored
In the process of moving the debug counters sysfs entries, the commit mentioned below eliminated the cm_infiniband sysfs directory. This sysfs directory was tied to the cm_port object allocated in procedure cm_add_one(). Before the commit below, this cm_port object was freed via a call to kobject_put(port->kobj) in procedure cm_remove_port_fs(). Since port no longer uses its kobj, kobject_put(port->kobj) was eliminated. This, however, meant that kfree was never called for the cm_port buffers. Fix this by adding explicit kfree(port) calls to functions cm_add_one() and cm_remove_one(). Note: the kfree call in the first chunk below (in the cm_add_one error flow) fixes an old, undetected memory leak. Fixes: c87e65cf ("RDMA/cm: Move debug counters to be under relevant IB device") Link: https://lore.kernel.org/r/20190916071154.20383-2-leon@kernel.orgSigned-off-by:
Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by:
-
Christophe JAILLET authored
According to surrounding error paths, it is likely that 'goto err_get;' is expected here. Otherwise, a call to 'rdma_restrack_put(res);' would be missing. Fixes: c5dfe0ea ("RDMA/nldev: Add resource tracker doit callback") Link: https://lore.kernel.org/r/20190818091044.8845-1-christophe.jaillet@wanadoo.frSigned-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by:
-
Shiraz, Saleem authored
i40iw IB device registration fails with ENODEV. ib_register_device setup_device/setup_port_data i40iw_port_immutable ib_query_port iw_query_port ib_device_get_netdev(ENODEV) ib_device_get_netdev() does not have a netdev associated with the ibdev and thus fails. Use ib_device_set_netdev() to associate netdev to ibdev in i40iw before IB device registration. Fixes: 4929116b ("RDMA/core: Add common iWARP query port") Link: https://lore.kernel.org/r/20190925164524.856-1-shiraz.saleem@intel.comSigned-off-by:Shiraz, Saleem <shiraz.saleem@intel.com> Reviewed-by:
-
- 01 Oct, 2019 6 commits
-
-
Bart Van Assche authored
This patch fixes the lock inversion complaint: ============================================ WARNING: possible recursive locking detected 5.3.0-rc7-dbg+ #1 Not tainted -------------------------------------------- kworker/u16:6/171 is trying to acquire lock: 00000000035c6e6c (&id_priv->handler_mutex){+.+.}, at: rdma_destroy_id+0x78/0x4a0 [rdma_cm] but task is already holding lock: 00000000bc7c307d (&id_priv->handler_mutex){+.+.}, at: iw_conn_req_handler+0x151/0x680 [rdma_cm] other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&id_priv->handler_mutex); lock(&id_priv->handler_mutex); *** DEADLOCK *** May be due to missing lock nesting notation 3 locks held by kworker/u16:6/171: #0: 00000000e2eaa773 ((wq_completion)iw_cm_wq){+.+.}, at: process_one_work+0x472/0xac0 #1: 000000001efd357b ((work_completion)(&work->work)#3){+.+.}, at: process_one_work+0x476/0xac0 #2: 00000000bc7c307d (&id_priv->handler_mutex){+.+.}, at: iw_conn_req_handler+0x151/0x680 [rdma_cm] stack backtrace: CPU: 3 PID: 171 Comm: kworker/u16:6 Not tainted 5.3.0-rc7-dbg+ #1 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 Workqueue: iw_cm_wq cm_work_handler [iw_cm] Call Trace: dump_stack+0x8a/0xd6 __lock_acquire.cold+0xe1/0x24d lock_acquire+0x106/0x240 __mutex_lock+0x12e/0xcb0 mutex_lock_nested+0x1f/0x30 rdma_destroy_id+0x78/0x4a0 [rdma_cm] iw_conn_req_handler+0x5c9/0x680 [rdma_cm] cm_work_handler+0xe62/0x1100 [iw_cm] process_one_work+0x56d/0xac0 worker_thread+0x7a/0x5d0 kthread+0x1bc/0x210 ret_from_fork+0x24/0x30 This is not a bug as there are actually two lock classes here. Link: https://lore.kernel.org/r/20190930231707.48259-3-bvanassche@acm.org Fixes: de910bd9 ("RDMA/cma: Simplify locking needed for serialization of callbacks") Signed-off-by:Bart Van Assche <bvanassche@acm.org> Reviewed-by:
-
Potnuri Bharat Teja authored
dump_qp() is wrongly trying to dump SRQ structures as QP when SRQ is used by the application. This patch matches the QPID before dumping them. Also removes unwanted SRQ id addition to QP id xarray. Fixes: 2f431291 ("cxgb4: Convert qpidr to XArray") Link: https://lore.kernel.org/r/20190930074119.20046-1-bharat@chelsio.comSigned-off-by:
Rahul Kundu <rahul.kundu@chelsio.com> Signed-off-by:
-
Navid Emamdoost authored
In sdma_init if rhashtable_init fails the allocated memory for tmp_sdma_rht should be released. Fixes: 5a52a7ac ("IB/hfi1: NULL pointer dereference when freeing rhashtable") Link: https://lore.kernel.org/r/20190925144543.10141-1-navid.emamdoost@gmail.comSigned-off-by:
Navid Emamdoost <navid.emamdoost@gmail.com> Acked-by:
-
Michal Kalderon authored
If an iWARP driver is probed and removed while there are no ips set for the device, it will lead to a reference count leak on the inet device of the netdevice. In addition, the netdevice was accessed after already calling netdev_put, which could lead to using the netdev after already freed. Fixes: 4929116b ("RDMA/core: Add common iWARP query port") Link: https://lore.kernel.org/r/20190925123332.10746-1-michal.kalderon@marvell.comSigned-off-by:
Ariel Elior <ariel.elior@marvell.com> Signed-off-by:
Michal Kalderon <michal.kalderon@marvell.com> Reviewed-by:
-
Krishnamraju Eraparaju authored
In siw_qp_llp_write_space(), 'sock' members should be accessed with sk_callback_lock held, otherwise, it could race with siw_sk_restore_upcalls(). And this could cause "NULL deref" panic. Below panic is due to the NULL cep returned from sk_to_cep(sk): Call Trace: <IRQ> siw_qp_llp_write_space+0x11/0x40 [siw] tcp_check_space+0x4c/0xf0 tcp_rcv_established+0x52b/0x630 tcp_v4_do_rcv+0xf4/0x1e0 tcp_v4_rcv+0x9b8/0xab0 ip_protocol_deliver_rcu+0x2c/0x1c0 ip_local_deliver_finish+0x44/0x50 ip_local_deliver+0x6b/0xf0 ? ip_protocol_deliver_rcu+0x1c0/0x1c0 ip_rcv+0x52/0xd0 ? ip_rcv_finish_core.isra.14+0x390/0x390 __netif_receive_skb_one_core+0x83/0xa0 netif_receive_skb_internal+0x73/0xb0 napi_gro_frags+0x1ff/0x2b0 t4_ethrx_handler+0x4a7/0x740 [cxgb4] process_responses+0x2c9/0x590 [cxgb4] ? t4_sge_intr_msix+0x1d/0x30 [cxgb4] ? handle_irq_event_percpu+0x51/0x70 ? handle_irq_event+0x41/0x60 ? handle_edge_irq+0x97/0x1a0 napi_rx_handler+0x14/0xe0 [cxgb4] net_rx_action+0x2af/0x410 __do_softirq+0xda/0x2a8 do_softirq_own_stack+0x2a/0x40 </IRQ> do_softirq+0x50/0x60 __local_bh_enable_ip+0x50/0x60 ip_finish_output2+0x18f/0x520 ip_output+0x6e/0xf0 ? __ip_finish_output+0x1f0/0x1f0 __ip_queue_xmit+0x14f/0x3d0 ? __slab_alloc+0x4b/0x58 __tcp_transmit_skb+0x57d/0xa60 tcp_write_xmit+0x23b/0xfd0 __tcp_push_pending_frames+0x2e/0xf0 tcp_sendmsg_locked+0x939/0xd50 tcp_sendmsg+0x27/0x40 sock_sendmsg+0x57/0x80 siw_tx_hdt+0x894/0xb20 [siw] ? find_busiest_group+0x3e/0x5b0 ? common_interrupt+0xa/0xf ? common_interrupt+0xa/0xf ? common_interrupt+0xa/0xf siw_qp_sq_process+0xf1/0xe60 [siw] ? __wake_up_common_lock+0x87/0xc0 siw_sq_resume+0x33/0xe0 [siw] siw_run_sq+0xac/0x190 [siw] ? remove_wait_queue+0x60/0x60 kthread+0xf8/0x130 ? siw_sq_resume+0xe0/0xe0 [siw] ? kthread_bind+0x10/0x10 ret_from_fork+0x35/0x40 Fixes: f29dd55b ("rdma/siw: queue pair methods") Link: https://lore.kernel.org/r/20190923101112.32685-1-krishna2@chelsio.comSigned-off-by:
-
Adit Ranadive authored
An extra kfree cleanup was missed since these are now deallocated by core. Link: https://lore.kernel.org/r/1568848066-12449-1-git-send-email-aditr@vmware.com Cc: <stable@vger.kernel.org> Fixes: 68e326de ("RDMA: Handle SRQ allocations by IB/core") Signed-off-by:
Adit Ranadive <aditr@vmware.com> Reviewed-by:
Vishnu Dasa <vdasa@vmware.com> Reviewed-by:
-
- 30 Sep, 2019 9 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linuxLinus Torvalds authored
Pull btrfs fixes from David Sterba: "A bunch of fixes that accumulated in recent weeks, mostly material for stable. Summary: - fix for regression from 5.3 that prevents to use balance convert with single profile - qgroup fixes: rescan race, accounting leak with multiple writers, potential leak after io failure recovery - fix for use after free in relocation (reported by KASAN) - other error handling fixups" * tag 'for-5.4-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: qgroup: Fix reserved data space leak if we have multiple reserve calls btrfs: qgroup: Fix the wrong target io_tree when freeing reserved data space btrfs: Fix a regression which we can't convert to SINGLE profile btrfs: relocation: fix use-after-free on dead relocation roots Btrfs: fix race setting up and completing qgroup rescan workers Btrfs: fix missing error return if writeback for extent buffer never started btrfs: adjust dirty_metadata_bytes after writeback failure of extent buffer Btrfs: fix selftests failure due to uninitialized i_mode in test inodes -
git://github.com/c-sky/csky-linuxLinus Torvalds authored
Pull csky updates from Guo Ren: "This round of csky subsystem just some fixups: - Fix mb() synchronization problem - Fix dma_alloc_coherent with PAGE_SO attribute - Fix cache_op failed when cross memory ZONEs - Optimize arch_sync_dma_for_cpu/device with dma_inv_range - Fix ioremap function losing - Fix arch_get_unmapped_area() implementation - Fix defer cache flush for 610 - Support kernel non-aligned access - Fix 610 vipt cache flush mechanism - Fix add zero_fp fixup perf backtrace panic - Move static keyword to the front of declaration - Fix csky_pmu.max_period assignment - Use generic free_initrd_mem() - entry: Remove unneeded need_resched() loop" * tag 'csky-for-linus-5.4-rc1' of git://github.com/c-sky/csky-linux: csky: Move static keyword to the front of declaration csky: entry: Remove unneeded need_resched() loop csky: Fixup csky_pmu.max_period assignment csky: Fixup add zero_fp fixup perf backtrace panic csky: Use generic free_initrd_mem() csky: Fixup 610 vipt cache flush mechanism csky: Support kernel non-aligned access csky: Fixup defer cache flush for 610 csky: Fixup arch_get_unmapped_area() implementation csky: Fixup ioremap function losing csky: Optimize arch_sync_dma_for_cpu/device with dma_inv_range csky/dma: Fixup cache_op failed when cross memory ZONEs csky: Fixup dma_alloc_coherent with PAGE_SO attribute csky: Fixup mb() synchronization problem
-
git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds authored
Pull ARM SoC fixes from Olof Johansson: "A few fixes that have trickled in through the merge window: - Video fixes for OMAP due to panel-dpi driver removal - Clock fixes for OMAP that broke no-idle quirks + nfsroot on DRA7 - Fixing arch version on ASpeed ast2500 - Two fixes for reset handling on ARM SCMI" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: ARM: aspeed: ast2500 is ARMv6K reset: reset-scmi: add missing handle initialisation firmware: arm_scmi: reset: fix reset_state assignment in scmi_domain_reset bus: ti-sysc: Remove unpaired sysc_clkdm_deny_idle() ARM: dts: logicpd-som-lv: Fix i2c2 and i2c3 Pin mux ARM: dts: am3517-evm: Fix missing video ARM: dts: logicpd-torpedo-baseboard: Fix missing video ARM: omap2plus_defconfig: Fix missing video bus: ti-sysc: Fix handling of invalid clocks bus: ti-sysc: Fix clock handling for no-idle quirks
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull tracing fixes from Steven Rostedt: "A few more tracing fixes: - Fix a buffer overflow by checking nr_args correctly in probes - Fix a warning that is reported by clang - Fix a possible memory leak in error path of filter processing - Fix the selftest that checks for failures, but wasn't failing - Minor clean up on call site output of a memory trace event" * tag 'trace-v5.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: selftests/ftrace: Fix same probe error test mm, tracing: Print symbol name for call_site in trace events tracing: Have error path in predicate_parse() free its allocated memory tracing: Fix clang -Wint-in-bool-context warnings in IF_ASSIGN macro tracing/probe: Fix to check the difference of nr_args before adding probe
-
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds authored
Pull more MMC updates from Ulf Hansson: "A couple more updates/fixes for MMC: - sdhci-pci: Add Genesys Logic GL975x support - sdhci-tegra: Recover loss in throughput for DMA - sdhci-of-esdhc: Fix DMA bug" * tag 'mmc-v5.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: host: sdhci-pci: Add Genesys Logic GL975x support mmc: tegra: Implement ->set_dma_mask() mmc: sdhci: Let drivers define their DMA mask mmc: sdhci-of-esdhc: set DMA snooping based on DMA coherence mmc: sdhci: improve ADMA error reporting
-
Krzysztof Wilczynski authored
Move the static keyword to the front of declaration of csky_pmu_of_device_ids, and resolve the following compiler warning that can be seen when building with warnings enabled (W=1): arch/csky/kernel/perf_event.c:1340:1: warning: ‘static’ is not at beginning of declaration [-Wold-style-declaration] Signed-off-by:
Krzysztof Wilczynski <kw@linux.com> Signed-off-by:
Guo Ren <guoren@kernel.org>
-
Valentin Schneider authored
Since the enabling and disabling of IRQs within preempt_schedule_irq() is contained in a need_resched() loop, we don't need the outer arch code loop. Signed-off-by:
Valentin Schneider <valentin.schneider@arm.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds authored
Pull Documentation/process update from Greg KH: "Here are two small Documentation/process/embargoed-hardware-issues.rst file updates that missed my previous char/misc pull request. The first one adds an Intel representative for the process, and the second one cleans up the text a bit more when it comes to how the disclosure rules work, as it was a bit confusing to some companies" * tag 'char-misc-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: Documentation/process: Clarify disclosure rules Documentation/process: Volunteer as the ambassador for Intel
-
