- 14 Jul, 2016 23 commits
-
-
Or Gerlitz authored
The VF representors support only TC filter/action offloads (not mqprio) and this is enabled for them by default. Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Or Gerlitz authored
Enhance the TC offload code such that when the eswitch exists and it's mode being SRIOV offloads, we do TC actions parsing and setup targeted for eswitch. Next, we add the offloaded flow to the HW e-switch (fdb). Signed-off-by:
-
Or Gerlitz authored
Add the setup code that parses the TC actions needed to support offloading drop and mirred/redirect for SRIOV e-switch. We can redirect between two devices if they belong to the same HW switch, compare the switchdev HW ID attribute to enforce that. Signed-off-by:
-
Or Gerlitz authored
This helper serves to know if two switchdev port netdevices belong to the same HW ASIC, e.g to figure out if forwarding offload is possible between them. Signed-off-by:
-
Or Gerlitz authored
Towards reusing the TC offloads code for an SRIOV use-case, change some of the helper functions to have _nic in their names so it's clear what's NIC unique and what's general. Also group together the NIC related helpers so we can easily branch per the use-case in downstream patch. Signed-off-by:
-
Or Gerlitz authored
This allows for upper levels in the driver, e.g the TC offload code to add e-switch offloaded steering rules. The caller provides the rule spec for matching, action, source and destination vports. Signed-off-by:
-
Or Gerlitz authored
In the offloads mode, some slow path rules are added by the driver (e.g send-to-vport), while offloaded rules are to be added from upper layers. The slow path rules have lower priority and we don't want matching on offloaded rules to suffer from extra steering hops related to the slow path rules. We use two priorities, one for offloaded rules (fast path), and one for the control rules (slow path). To allow for that, we enable two priorities for the FDB namespace in the FS core code. Signed-off-by:
-
Or Gerlitz authored
Currenly, the code that programs the flow actions into the firmware doesn't check if was actually asked to offload the statistics, fix that. Fixes: aad7e08d ('net/mlx5e: Hardware offloaded flower filter statistics support') Signed-off-by:
-
Amir Vadai authored
This commit utilize the ability of ConnectX-4 to bulk read flow counters. Few bulk counter queries could be done instead of issuing thousands of firmware commands per second to get statistics of all flows set to HW, such as those programmed when we offload tc filters. Counters are stored sorted by hardware id, and queried in blocks (id + number of counters). Due to hardware requirement, start of block and number of counters in a block must be four aligned. Reviewed-by:
Amir Vadai <amir@vadai.me> Signed-off-by:
-
Amir Vadai authored
In order to use bulk counters, we need to have counters sorted by id. Signed-off-by:
-
David S. Miller authored
Elad Kanfi says: ==================== Code style fixes Fix all checkpatch warnings and errors, and reuse code ==================== Signed-off-by: -
Elad Kanfi authored
Add inline function that checks if there is a pending tx packet. Signed-off-by:
Elad Kanfi <eladkan@mellanox.com> Signed-off-by:
-
Elad Kanfi authored
Fix following coding style problems : ERROR: else should follow close brace '}' + } + else { /* !dst_is_aligned */ WARNING: Missing a blank line after declarations + u32 buf = nps_enet_reg_get(priv, NPS_ENET_REG_RX_BUF); + put_unaligned_be32(buf, reg); WARNING: Missing a blank line after declarations + u32 buf; + ioread32_rep(priv->regs_base + NPS_ENET_REG_RX_BUF, &buf, 1); CHECK: Blank lines aren't necessary before a close brace '}' + + } total: 1 errors, 2 warnings, 1 checks, 683 lines checked Signed-off-by: -
David S. Miller authored
Marcelo Ricardo Leitner says: ==================== sctp: allow GSO frags to access the chunk too Patchset is named after the most important fix in it. First two patches are preparing the grounds for the 3rd patch. After the 3rd, they are not strictly logically related to the patchset, but I kept them together as they depend on each other. More details on patch changelogs. ==================== Signed-off-by: -
Marcelo Ricardo Leitner authored
Currently only read-only checks are performed up to the point on where we check if peer is ECN capable, checks which we can avoid otherwise. The flag ecn_ce_done is only used to perform this check once per incoming packet, and nothing more. Thus this patch moves the peer check up. Signed-off-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
-
Marcelo Ricardo Leitner authored
We should not clear that flag when switching to a new skb from a GSO skb because it would cause ECN processing to happen multiple times per GSO skb, which is not wanted. Instead, let it be processed once per chunk. That is, in other words, once per IP header available. Fixes: 90017acc ("sctp: Add GSO support") Signed-off-by:
-
Marcelo Ricardo Leitner authored
Identifying address family operations during rx path is not something expensive but it's ugly to the eye to have it done multiple times, specially when we already validated it during initial rx processing. This patch takes advantage of the now shared sctp_input_cb and make the pointer to the operations readily available. Signed-off-by:
-
Marcelo Ricardo Leitner authored
SCTP will try to access original IP headers on sctp_recvmsg in order to copy the addresses used. There are also other places that do similar access to IP or even SCTP headers. But after 90017acc ("sctp: Add GSO support") they aren't always there because they are only present in the header skb. SCTP handles the queueing of incoming data by cloning the incoming skb and limiting to only the relevant payload. This clone has its cb updated to something different and it's then queued on socket rx queue. Thus we need to fix this in two moments. For rx path, not related to socket queue yet, this patch uses a partially copied sctp_input_cb to such GSO frags. This restores the ability to access the headers for this part of the code. Regarding the socket rx queue, it removes iif member from sctp_event and also add a chunk pointer on it. With these changes we're always able to reach the headers again. The biggest change here is that now the sctp_chunk struct and the original skb are only freed after the application consumed the buffer. Note however that the original payload was already like this due to the skb cloning. For iif, SCTP's IPv4 code doesn't use it, so no change is necessary. IPv6 now can fetch it directly from original's IPv6 CB as the original skb is still accessible. In the future we probably can simplify sctp_v*_skb_iif() stuff, as sctp_v4_skb_iif() was called but it's return value not used, and now it's not even called, but such cleanup is out of scope for this change. Fixes: 90017acc ("sctp: Add GSO support") Signed-off-by:
-
Marcelo Ricardo Leitner authored
The next patch needs 8 bytes in there. sctp_ulpevent has a hole due to bad alignment; msg_flags is using 4 bytes while it actually uses only 2, so we shrink it, and iif member (4 bytes) which can be easily fetched from another place once the next patch is there, so we remove it and thus creating space for 8 bytes. Signed-off-by:
-
Marcelo Ricardo Leitner authored
We process input path in other files too and having access to it is nice, so move it to a header where it's shared. Signed-off-by:
-
Wei Yongjun authored
There is a error message within devm_ioremap_resource already, so remove the dev_err call to avoid redundant error message. Signed-off-by:
Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by:
-
Wei Yongjun authored
There is a error message within devm_ioremap_resource already, so remove the dev_err call to avoid redundant error message. Signed-off-by:
-
David Ahern authored
Comments from Frank Kellerman on last doc update: - extra whitespace in front of a neigh show command - convert the brief link example to 'vrf red' Signed-off-by:
David Ahern <dsa@cumulusnetworks.com> Signed-off-by:
-
- 13 Jul, 2016 4 commits
-
-
David S. Miller authored
Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2016-07-13 Here's our main bluetooth-next pull request for the 4.8 kernel: - Fixes and cleanups in 802.15.4 and 6LoWPAN code - Fix out of bounds issue in btmrvl driver - Fixes to Bluetooth socket recvmsg return values - Use crypto_cipher_encrypt_one() instead of crypto_skcipher - Cleanup of Bluetooth connection sysfs interface - New Authentication failure reson code for Disconnected mgmt event - New USB IDs for Atheros, Qualcomm and Intel Bluetooth controllers Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by:
-
David Ahern authored
Update vrf documentation for changes made to 4.4 - 4.8 kernels and iproute2 support for vrf keyword. Signed-off-by:
-
Johan Hedberg authored
Increment the mgmt revision due to the recently added new reason code for the Disconnected event. Signed-off-by:
Johan Hedberg <johan.hedberg@intel.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org>
-
Szymon Janc authored
If link is disconnected due to Authentication Failure (PIN or Key Missing status) userspace will be notified about this with proper error code. Many LE profiles define "PIN or Key Missing" status as indication of remote lost bond so this allows userspace to take action on this. @ Device Connected: 88:63:DF:88:0E:83 (1) flags 0x0000 02 01 1a 05 03 0a 18 0d 18 0b 09 48 65 61 72 74 ...........Heart 20 52 61 74 65 Rate > HCI Event: Command Status (0x0f) plen 4 LE Read Remote Used Features (0x08|0x0016) ncmd 1 Status: Success (0x00) > ACL Data RX: Handle 3585 flags 0x02 dlen 11 ATT: Read By Group Type Request (0x10) len 6 Handle range: 0x0001-0xffff Attribute group type: Primary Service (0x2800) > HCI Event: LE Meta Event (0x3e) plen 12 LE Read Remote Used Features (0x04) Status: Success (0x00) Handle: 3585 Features: 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00 LE Encryption < HCI Command: LE Start Encryption (0x08|0x0019) plen 28 Handle: 3585 Random number: 0x0000000000000000 Encrypted diversifier: 0x0000 Long term key: 26201cd479a0921b6f949f0b1fa8dc82 > HCI Event: Command Status (0x0f) plen 4 LE Start Encryption (0x08|0x0019) ncmd 1 Status: Success (0x00) > HCI Event: Encryption Change (0x08) plen 4 Status: PIN or Key Missing (0x06) Handle: 3585 Encryption: Disabled (0x00) < HCI Command: Disconnect (0x01|0x0006) plen 3 Handle: 3585 Reason: Authentication Failure (0x05) > HCI Event: Command Status (0x0f) plen 4 Disconnect (0x01|0x0006) ncmd 1 Status: Success (0x00) > HCI Event: Disconnect Complete (0x05) plen 4 Status: Success (0x00) Handle: 3585 Reason: Connection Terminated By Local Host (0x16) @ Device Disconnected: 88:63:DF:88:0E:83 (1) reason 4 @ Device Connected: C4:43:8F:A3:4D:83 (0) flags 0x0000 08 09 4e 65 78 75 73 20 35 ..Nexus 5 > HCI Event: Command Status (0x0f) plen 4 Authentication Requested (0x01|0x0011) ncmd 1 Status: Success (0x00) > HCI Event: Link Key Request (0x17) plen 6 Address: C4:43:8F:A3:4D:83 (LG Electronics) < HCI Command: Link Key Request Reply (0x01|0x000b) plen 22 Address: C4:43:8F:A3:4D:83 (LG Electronics) Link key: 080812e4aa97a863d11826f71f65a933 > HCI Event: Command Complete (0x0e) plen 10 Link Key Request Reply (0x01|0x000b) ncmd 1 Status: Success (0x00) Address: C4:43:8F:A3:4D:83 (LG Electronics) > HCI Event: Auth Complete (0x06) plen 3 Status: PIN or Key Missing (0x06) Handle: 75 @ Authentication Failed: C4:43:8F:A3:4D:83 (0) status 0x05 < HCI Command: Disconnect (0x01|0x0006) plen 3 Handle: 75 Reason: Remote User Terminated Connection (0x13) > HCI Event: Command Status (0x0f) plen 4 Disconnect (0x01|0x0006) ncmd 1 Status: Success (0x00) > HCI Event: Disconnect Complete (0x05) plen 4 Status: Success (0x00) Handle: 75 Reason: Connection Terminated By Local Host (0x16) @ Device Disconnected: C4:43:8F:A3:4D:83 (0) reason 4 Signed-off-by:Szymon Janc <szymon.janc@codecoup.pl> Signed-off-by:
-
- 12 Jul, 2016 11 commits
-
-
Jiri Pirko authored
Trace EMAD messages going down to HW and up from HW. Devlink needs to be registered before EMAD init so the trace function can be called with valid devlink handle. Signed-off-by:
Jiri Pirko <jiri@mellanox.com> v1->v2: - Use trace_devlink_hwmsg directly Signed-off-by:
-
Jiri Pirko authored
Define a tracepoint and allow user to trace messages going to and from hardware associated with devlink instance. Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Wei Yongjun authored
Fixes the following sparse warning: net/dsa/dsa2.c:680:6: warning: symbol '_dsa_unregister_switch' was not declared. Should it be static? Signed-off-by:
-
Wei Yongjun authored
Fix missing clk_disable_unprepare() call before return from dwceqos_probe() in the error handling case of invalid fixed-link. Signed-off-by:
-
Wei Yongjun authored
Fixes the following sparse warnings: drivers/net/ethernet/mediatek/mtk_eth_soc.c:79:5: warning: symbol '_mtk_mdio_write' was not declared. Should it be static? drivers/net/ethernet/mediatek/mtk_eth_soc.c:98:5: warning: symbol '_mtk_mdio_read' was not declared. Should it be static? Signed-off-by:
-
Wei Yongjun authored
security initialized after alloc workqueue, so we should exit security before destroy workqueue in the error handing. Fixes: 648af7fc ("rxrpc: Absorb the rxkad security module") Signed-off-by:
-
Wei Yongjun authored
PTR_ERR should access the value just tested by IS_ERR, otherwise the wrong error code will be returned. Signed-off-by:
-
Haiyang Zhang authored
This script helps to create bonding network devices based on synthetic NIC (the virtual network adapter usually provided by Hyper-V) and the matching VF NIC (SRIOV virtual function). So the synthetic NIC and VF NIC can function as one network device, and fail over to the synthetic NIC if VF is down. Mayjor distros (RHEL, Ubuntu, SLES) supported by Hyper-V are supported by this script. Signed-off-by:
Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by:
K. Y. Srinivasan <kys@microsoft.com> Signed-off-by:
-
Walter Mack authored
isr function issues SPI read command to mrf to obtain INTSTAT. SPI transfer is 2 bytes, but value of 2nd byte is not defined. This had the effect that only the first ISR worked as intended. The second ISR read incorrect INTSTAT values. Observed on Raspberry PI B+. Signed-off-by:
Walter Mack <wmack@componentsw.com> Signed-off-by:
-
Paul Gortmaker authored
The Makefile controlling compilation of this file is obj-y, meaning that it currently is never being built as a module. Since MODULE_ALIAS is a no-op for non-modular code, we can simply remove the MODULE_ALIAS_NETPROTO variant used here. We replace module.h with kmod.h since the file does make use of request_module() in order to load other modules from here. We don't have to worry about init.h coming in via the removed module.h since the file explicitly includes init.h already. Cc: "David S. Miller" <davem@davemloft.net> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: James Morris <jmorris@namei.org> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: Patrick McHardy <kaber@trash.net> Cc: netdev@vger.kernel.org Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by:
-
Wei Yongjun authored
In case of error, the function devm_ioremap_resource() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Signed-off-by:
-
- 11 Jul, 2016 2 commits
-
-
Dmitry Tunin authored
T: Bus=01 Lev=01 Prnt=01 Port=07 Cnt=05 Dev#= 5 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3490 Rev=00.01 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb BugLink: https://bugs.launchpad.net/bugs/1600623Signed-off-by:
Dmitry Tunin <hanipouspilot@gmail.com> Signed-off-by:
-
David S. Miller authored
drivers/net/dsa/b53/b53_srab.c: In function 'b53_srab_probe': >> drivers/net/dsa/b53/b53_srab.c:388:20: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] pdata->chip_id = (u32)of_id->data; ^ Reported-by:kbuild test robot <fengguang.wu@intel.com> Signed-off-by:
-
