- 21 May, 2014 2 commits
-
-
Vivek Gautam authored
This patch adds sysreg-syscon node to exynos5250 and exynos5420 device tree, to access System Register's registers using syscon driver. Signed-off-by: Kamil Debski <k.debski@samsung.com> [gautam.vivek@samsung.com: Split this syreg-syscon dts entry] [gautam.vivek@samsung.com: added similar syscon entry for exynos5420] Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> [vikas.sajjan@samsung.com: updated the binding document] Signed-off-by: Vikas Sajjan <vikas.sajjan@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
-
Rahul Sharma authored
DP Hpd Gpio pin which is "gpx2-6" in Exynos 5420 based peach board, belongs to Pinctrl_0. It has moved to pinctrl_0 from pinctrl_3. Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
-
- 19 May, 2014 20 commits
-
-
Sachin Kamat authored
Add MFC memory banks to Exynos5420 based SMDK and Arndale-octa boards. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
-
Rahul Sharma authored
Enable dp-controller for peach-pit board. Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
-
Rahul Sharma authored
Enable fimd for peach-pit board. Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
-
Rahul Sharma authored
Enable dp-controller for snow board. Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
-
Rahul Sharma authored
Enable fimd node for snow board. Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
-
Ajay Kumar authored
Add PWM backlight node for exynos5250 based snow board. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
-
Ajay Kumar authored
Adds the PWM nodes to 5250 pinctrl dtsi file. Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
-
Vivek Gautam authored
Add required fixed-regulator for VBUS supply for USB 3.0 controller phy. Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
-
Vivek Gautam authored
Add required fixed-regulator for VBUS supply for USB 3.0 controller phy. Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
-
Vivek Gautam authored
Add required fixed-regulator for VBUS supply for USB 3.0 controller phy. Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
-
Sachin Kamat authored
PD entry was missing in MFC codec node. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Reviewed-by : Arun Kumar K <arun.kk@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
-
Tushar Behera authored
The audio setup on Peach-pit board is similar to Snow board, hence the sound-card driver used on Snow board can be reused on Peach-pit board. Peach-pit board uses MAX98090 audio codec. Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
-
Tushar Behera authored
The audio codec on Snow board, MAX98095 is connected on I2C7 bus. Also it requires the GPX1-7 line to be pulled up. Updated Snow DTS file to incorporate above changes and added a sound node to instantiate the I2S-based sound card. Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
-
Vivek Gautam authored
Removing the dt node for older usb3 phy driver from Exynos5250 device tree and updating the dt node for DWC3 controller to use new phy driver based on generic phy framework. Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
-
Vivek Gautam authored
Add device tree node for new usbdrd-phy driver, which is based on generic phy framework. Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
-
Vivek Gautam authored
Add device tree nodes for DWC3 controller present on Exynos 5420 SoC, to enable support for USB 3.0. Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
-
Vivek Gautam authored
Add device tree nodes for USB 3.0 PHY present alongwith USB 3.0 controller Exynos 5420 SoC. This phy driver is based on generic phy framework. Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
-
Rahul Sharma authored
Enable hdmi for exynos5420 based peach-pit board. Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com> Acked-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
-
Rahul Sharma authored
Replace compatible string for HDMI node in Exynos5420. Since latest restructring in Drm hdmi driver, it is agreed to use a seperate compatible string for Exynos5420 HDMI IP siince it uses APB mapped Phy. Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com> Acked-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
-
Rahul Sharma authored
Enable support for HDMI for exynos5250 based Snow board. Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com> Acked-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
-
- 15 May, 2014 3 commits
-
-
Doug Anderson authored
Added TPS65090 regulator related nodes to Snow board. Signed-off-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
-
Doug Anderson authored
Added pinctrl node for embedded controller (EC) IRQ on Snow board. Signed-off-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
-
Doug Anderson authored
Added i2c-arbitrator pinctrl node to Snow board. Signed-off-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
-
- 14 May, 2014 2 commits
-
-
Sachin Kamat authored
Add SRAM binding documentation. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Tomasz Figa <t.figa@samsung.com> [kgene.kim@samsung.com: changed name SRAM to SYSRAM] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
-
Sachin Kamat authored
Instead of hardcoding the SYSRAM details for each SoC, pass this information through device tree (DT) and make the code SoC agnostic. Generic DT SRAM bindings are used for achieving this. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
-
- 08 May, 2014 7 commits
-
-
Arun Kumar K authored
Adds the google peach-pit board dts file which uses exynos5420 SoC. Signed-off-by: Arun Kumar K <arun.kk@samsung.com> Signed-off-by: Doug Anderson <dianders@chromium.org> Reviewed-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
-
Arun Kumar K authored
Adding labels to nodes which do not have it yet in exynos5420. This is done so as to use reference based node updation in board files. Signed-off-by: Arun Kumar K <arun.kk@samsung.com> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Reviewed-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
-
Arun Kumar K authored
Adds the PWM nodes to 5420 pinctrl dtsi file. Signed-off-by: Arun Kumar K <arun.kk@samsung.com> Reviewed-by: Doug Anderson <dianders@chromium.org> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
-
Sylwester Nawrocki authored
This patch enables the rear facing camera (s5c73m3) on TRATS2 board by adding the I2C0 bus controller, s5c73m3 sensor, MIPI CSI-2 receiver and the sensor's voltage regulator supply nodes. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
-
Sylwester Nawrocki authored
Remove unused /camera/clock-controller node and add required clock properties to the camera node. This is required for a clock provider that will be referenced by image sensor devices. Also add required clock related changes to s5k6a3 device node and afvdd regulator supply. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
-
Tomasz Stanislawski authored
The i2c_ak8975 controller uses label i2c8. This alias is already used for I2C controller 8 defined in file arch/arm/boot/dts/exynos4.dtsi. This patch renames a label for i2c_ak8975 to i2c9. Signed-off-by: Tomasz Stanislawski <t.stanislaws@samsung.com> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
-
Tomasz Stanislawski authored
This patch adds missing pinctrls for I2C controllers 2-7. Signed-off-by: Tomasz Stanislawski <t.stanislaws@samsung.com> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
-
- 13 Apr, 2014 6 commits
-
-
Linus Torvalds authored
-
Geert Uytterhoeven authored
Some versions of gcc even warn about it: mm/shmem.c: In function ‘shmem_file_aio_read’: mm/shmem.c:1414: warning: ‘error’ may be used uninitialized in this function If the loop is aborted during the first iteration by one of the two first break statements, error will be uninitialized. Introduced by commit 6e58e79d ("introduce copy_page_to_iter, kill loop over iovec in generic_file_aio_read()"). Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Geert Uytterhoeven authored
On 32 bit, size_t is "unsigned int", not "unsigned long", causing the following warning when comparing with PAGE_SIZE, which is always "unsigned long": fs/cifs/file.c: In function ‘cifs_readdata_to_iov’: fs/cifs/file.c:2757: warning: comparison of distinct pointer types lacks a cast Introduced by commit 7f25bba8 ("cifs_iovec_read: keep iov_iter between the calls of cifs_readdata_to_iov()"), which changed the signedness of "remaining" and the code from min_t() to min(). Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/penberg/linuxLinus Torvalds authored
Pull slab changes from Pekka Enberg: "The biggest change is byte-sized freelist indices which reduces slab freelist memory usage: https://lkml.org/lkml/2013/12/2/64" * 'slab/next' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/linux: mm: slab/slub: use page->list consistently instead of page->lru mm/slab.c: cleanup outdated comments and unify variables naming slab: fix wrongly used macro slub: fix high order page allocation problem with __GFP_NOFAIL slab: Make allocations with GFP_ZERO slightly more efficient slab: make more slab management structure off the slab slab: introduce byte sized index for the freelist of a slab slab: restrict the number of objects in a slab slab: introduce helper functions to get/set free object slab: factor out calculate nr objects in cache_estimate
-
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuildLinus Torvalds authored
Pull misc kbuild changes from Michal Marek: "Here is the non-critical part of kbuild: - One bogus coccinelle check removed, one check fixed not to suggest the obsolete PTR_RET macro - scripts/tags.sh does not index the generated *.mod.c files - new objdiff tool to list differences between two versions of an object file - A fix for scripts/bootgraph.pl" * 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: scripts/coccinelle: Use PTR_ERR_OR_ZERO scripts/bootgraph.pl: Add graphic header scripts: objdiff: detect object code changes between two commits Coccicheck: Remove memcpy to struct assignment test scripts/tags.sh: Ignore *.mod.c
-
Mikulas Patocka authored
This patch fixes I/O errors with the sym53c8xx_2 driver when the disk returns QUEUE FULL status. When the controller encounters an error (including QUEUE FULL or BUSY status), it aborts all not yet submitted requests in the function sym_dequeue_from_squeue. This function aborts them with DID_SOFT_ERROR. If the disk has full tag queue, the request that caused the overflow is aborted with QUEUE FULL status (and the scsi midlayer properly retries it until it is accepted by the disk), but the sym53c8xx_2 driver aborts the following requests with DID_SOFT_ERROR --- for them, the midlayer does just a few retries and then signals the error up to sd. The result is that disk returning QUEUE FULL causes request failures. The error was reproduced on 53c895 with COMPAQ BD03685A24 disk (rebranded ST336607LC) with command queue 48 or 64 tags. The disk has 64 tags, but under some access patterns it return QUEUE FULL when there are less than 64 pending tags. The SCSI specification allows returning QUEUE FULL anytime and it is up to the host to retry. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: Matthew Wilcox <matthew@wil.cx> Cc: James Bottomley <JBottomley@Parallels.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-