- 08 Apr, 2017 14 commits
-
-
Christoph Hellwig authored
Try to use a write same with unmap bit variant if the device supports it and the caller allows for it. Signed-off-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by:
Hannes Reinecke <hare@suse.com> Signed-off-by:
Jens Axboe <axboe@fb.com>
-
Christoph Hellwig authored
This gets us support for non-discard efficient write of zeroes (e.g. NVMe) and prepares for removing the discard_zeroes_data flag. Also remove a pointless discard support check, which is done in blkdev_issue_discard already. Signed-off-by:
-
Christoph Hellwig authored
This avoids fallbacks to explicit zeroing in (__)blkdev_issue_zeroout if the caller doesn't want them. Also clean up the convoluted check for the return condition that this new flag is added to. Signed-off-by:
-
Christoph Hellwig authored
If this flag is set logical provisioning capable device should release space for the zeroed blocks if possible, if it is not set devices should keep the blocks anchored. Also remove an out of sync kerneldoc comment for a static function that would have become even more out of data with this change. Signed-off-by:
-
Christoph Hellwig authored
Turn the existing discard flag into a new BLKDEV_ZERO_UNMAP flag with similar semantics, but without referring to diѕcard. Signed-off-by:
-
Christoph Hellwig authored
We'll always use the WRITE ZEROES code for zeroing now. Signed-off-by:
-
Christoph Hellwig authored
It seems like the code currently passes whatever it was using for writes to WRITE SAME. Just switch it to WRITE ZEROES, although that doesn't need any payload. Untested, and confused by the code, maybe someone who understands it better than me can help.. Signed-off-by:
-
Christoph Hellwig authored
Copy & paste from the REQ_OP_WRITE_SAME code. Signed-off-by:
-
Christoph Hellwig authored
Fix up do_region to not allocate a bio_vec for discards. We've got rid of the discard payload allocated by the caller years ago. Obviously this wasn't actually harmful given how long it's been there, but it's still good to avoid the pointless allocation. Signed-off-by:
-
Christoph Hellwig authored
Copy & paste from the REQ_OP_WRITE_SAME code. Signed-off-by:
-
Christoph Hellwig authored
Signed-off-by:
-
Christoph Hellwig authored
Copy and past the REQ_OP_WRITE_SAME code to prepare to implementations that limit the write zeroes size. Signed-off-by:
-
Christoph Hellwig authored
Make life easy for implementations that needs to send a data buffer to the device (e.g. SCSI) by numbering it as a data out command. Signed-off-by:
-
Christoph Hellwig authored
Split sd_setup_discard_cmnd into one function per provisioning type. While this creates some very slight duplication of boilerplate code it keeps the code modular for additions of new provisioning types, and for reusing the write same functions for the upcoming scsi implementation of the Write Zeroes operation. Signed-off-by:
-
- 07 Apr, 2017 18 commits
-
-
Scott Bauer authored
Lets not flood the kernel log with messages unless the user requests so. Signed-off-by:
Scott Bauer <scott.bauer@intel.com> Signed-off-by:
-
Bart Van Assche authored
The blk_mq_dispatch_rq_list() implementation got modified several times but the comments in that function were not updated every time. Since it is nontrivial what is going on, update the comments in blk_mq_dispatch_rq_list(). Signed-off-by:
Bart Van Assche <bart.vanassche@sandisk.com> Cc: Omar Sandoval <osandov@fb.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by:
-
Bart Van Assche authored
Since the next patch in this series will use RCU to iterate over tag_list, make this safe. Add lockdep_assert_held() statements in functions that iterate over tag_list to make clear that using list_for_each_entry() instead of list_for_each_entry_rcu() is fine in these functions. Signed-off-by:
-
Omar Sandoval authored
Trivial cleanup. Signed-off-by:
Omar Sandoval <osandov@fb.com> Signed-off-by:
-
Omar Sandoval authored
Minor cleanup that makes it easier to figure out what's going on in the driver tag allocation failure path of blk_mq_dispatch_rq_list(). Signed-off-by:
-
Omar Sandoval authored
Schedulers need to be informed when a hardware queue is added or removed at runtime so they can allocate/free per-hardware queue data. So, replace the blk_mq_sched_init_hctx_data() helper, which only makes sense at init time, with .init_hctx() and .exit_hctx() hooks. Signed-off-by:
-
Jens Axboe authored
We've added a considerable amount of fixes for stalls and issues with the blk-mq scheduling in the 4.11 series since forking off the for-4.12/block branch. We need to do improvements on top of that for 4.12, so pull in the previous fixes to make our lives easier going forward. Signed-off-by: -
Bart Van Assche authored
To improve scalability, if hardware queues are shared, restart a single hardware queue in round-robin fashion. Rename blk_mq_sched_restart_queues() to reflect the new semantics. Remove blk_mq_sched_mark_restart_queue() because this function has no callers. Remove flag QUEUE_FLAG_RESTART because this patch removes the code that uses this flag. Signed-off-by:
-
Bart Van Assche authored
While running the srp-test software I noticed that request processing stalls sporadically at the beginning of a test, namely when mkfs is run against a dm-mpath device. Every time when that happened the following command was sufficient to resume request processing: echo run >/sys/kernel/debug/block/dm-0/state This patch avoids that such request processing stalls occur. The test I ran is as follows: while srp-test/run_tests -d -r 30 -t 02-mq; do :; done Signed-off-by: -
Bart Van Assche authored
If a .queue_rq() function returns BLK_MQ_RQ_QUEUE_BUSY then the block driver that implements that function is responsible for rerunning the hardware queue once requests can be queued again successfully. commit 52d7f1b5 ("blk-mq: Avoid that requeueing starts stopped queues") removed the blk_mq_stop_hw_queue() call from scsi_queue_rq() for the BLK_MQ_RQ_QUEUE_BUSY case. Hence change all calls to functions that are intended to rerun a busy queue such that these examine all hardware queues instead of only stopped queues. Since no other functions than scsi_internal_device_block() and scsi_internal_device_unblock() should ever stop or restart a SCSI queue, change the blk_mq_delay_queue() call into a blk_mq_delay_run_hw_queue() call. Fixes: commit 52d7f1b5 ("blk-mq: Avoid that requeueing starts stopped queues") Fixes: commit 7e79dadc ("blk-mq: stop hardware queue in blk_mq_delay_queue()") Signed-off-by:
-
Bart Van Assche authored
Introduce a function that runs a hardware queue unconditionally after a delay. Note: there is already a function that stops and restarts a hardware queue after a delay, namely blk_mq_delay_queue(). This function will be used in the next patch in this series. Signed-off-by:
-
NeilBrown authored
Currently only dm and md/raid5 bios trigger trace_block_bio_complete(). Now that we have bio_chain() and bio_inc_remaining(), it is not possible, in general, for a driver to know when the bio is really complete. Only bio_endio() knows that. So move the trace_block_bio_complete() call to bio_endio(). Now trace_block_bio_complete() pairs with trace_block_bio_queue(). Any bio for which a 'queue' event is traced, will subsequently generate a 'complete' event. There are a few cases where completion tracing is not wanted. 1/ If blk_update_request() has already generated a completion trace event at the 'request' level, there is no point generating one at the bio level too. In this case the bi_sector and bi_size will have changed, so the bio level event would be wrong 2/ If the bio hasn't actually been queued yet, but is being aborted early, then a trace event could be confusing. Some filesystems call bio_endio() but do not want tracing. 3/ The bio_integrity code interposes itself by replacing bi_end_io, then restoring it and calling bio_endio() again. This would produce two identical trace events if left like that. To handle these, we introduce a flag BIO_TRACE_COMPLETION and only produce the trace event when this is set. We address point 1 above by clearing the flag in blk_update_request(). We address point 2 above by only setting the flag when generic_make_request() is called. We address point 3 above by clearing the flag after generating a completion event. When bio_split() is used on a bio, particularly in blk_queue_split(), there is an extra complication. A new bio is split off the front, and may be handle directly without going through generic_make_request(). The old bio, which has been advanced, is passed to generic_make_request(), so it will trigger a trace event a second time. Probably the best result when a split happens is to see a single 'queue' event for the whole bio, then multiple 'complete' events - one for each component. To achieve this was can: - copy the BIO_TRACE_COMPLETION flag to the new bio in bio_split() - avoid generating a 'queue' event if BIO_TRACE_COMPLETION is already set. This way, the split-off bio won't create a queue event, the original won't either even if it re-submitted to generic_make_request(), but both will produce completion events, each for their own range. So if generic_make_request() is called (which generates a QUEUED event), then bi_endio() will create a single COMPLETE event for each range that the bio is split into, unless the driver has explicitly requested it not to. Signed-off-by:
NeilBrown <neilb@suse.com> Signed-off-by:
-
NeilBrown authored
The comment for the 'flags' field of 'bio' mentions "command" which is no longer stored there, and doesn't mention the bvec pool number, which is. BIO_RESET_BITS is set in such a way that it would need to be updated if new bits were added, which is easy to miss. BVEC_POOL_BITS is larger than needed. The BVEC_POOL_IDX() ranges from 0 to 6, so 3 bits are sufficient. This patch make improvements in each of these areas. Signed-off-by:
-
Omar Sandoval authored
blk_mq_update_nr_hw_queues() used to remap hardware queues, which is the behavior that drivers expect. However, commit 4e68a011 changed blk_mq_queue_reinit() to not remap queues for the case of CPU hotplugging, inadvertently making blk_mq_update_nr_hw_queues() not remap queues as well. This breaks, for example, NBD's multi-connection mode, leaving the added hardware queues unused. Fix it by making blk_mq_update_nr_hw_queues() explicitly remap the queues. Fixes: 4e68a011 ("blk-mq: don't redistribute hardware queues on a CPU hotplug event") Reviewed-by:
Keith Busch <keith.busch@intel.com> Reviewed-by:
Sagi Grimberg <sagi@grimberg.me> Signed-off-by:
-
Omar Sandoval authored
In elevator_switch(), if blk_mq_init_sched() fails, we attempt to fall back to the original scheduler. However, at this point, we've already torn down the original scheduler's tags, so this causes a crash. Doing the fallback like the legacy elevator path is much harder for mq, so fix it by just falling back to none, instead. Signed-off-by:
-
Omar Sandoval authored
If a new hardware queue is added at runtime, we don't allocate scheduler tags for it, leading to a crash. This hooks up the scheduler framework to blk_mq_{init,exit}_hctx() to make sure everything gets properly initialized/freed. Signed-off-by: -
Omar Sandoval authored
Preparation cleanup for the next couple of fixes, push blk_mq_sched_setup() and e->ops.mq.init_sched() into a helper. Signed-off-by:
-
Omar Sandoval authored
While dispatching requests, if we fail to get a driver tag, we mark the hardware queue as waiting for a tag and put the requests on a hctx->dispatch list to be run later when a driver tag is freed. However, blk_mq_dispatch_rq_list() may dispatch requests from multiple hardware queues if using a single-queue scheduler with a multiqueue device. If blk_mq_get_driver_tag() fails, it doesn't update the hardware queue we are processing. This means we end up using the hardware queue of the previous request, which may or may not be the same as that of the current request. If it isn't, the wrong hardware queue will end up waiting for a tag, and the requests will be on the wrong dispatch list, leading to a hang. The fix is twofold: 1. Make sure we save which hardware queue we were trying to get a request for in blk_mq_get_driver_tag() regardless of whether it succeeds or not. 2. Make blk_mq_dispatch_rq_list() take a request_queue instead of a blk_mq_hw_queue to make it clear that it must handle multiple hardware queues, since I've already messed this up on a couple of occasions. This didn't appear in testing with nvme and mq-deadline because nvme has more driver tags than the default number of scheduler tags. However, with the blk_mq_update_nr_hw_queues() fix, it showed up with nbd. Signed-off-by:
-
- 05 Apr, 2017 8 commits
-
-
Jens Axboe authored
After commit 64c7f1d1, we went from 1 to 2 holes in my test setup. If we move the timeout field a bit, we remove both of those holes and shrink struct request by 8 bytes. Reviewed-by:
-
Christoph Hellwig authored
Instead of bloating the generic struct request with it. Signed-off-by:
Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by:
-
Christoph Hellwig authored
The way NVMe uses this field is entirely different from the older SCSI/BLOCK_PC usage, so move it into struct nvme_request. Also reduce the size of the file to a unsigned char so that we leave space for additional smaller fields that will appear soon. Signed-off-by:
-
Christoph Hellwig authored
Signed-off-by:
-
Christoph Hellwig authored
Don't pass the status explicitly but derive it from the requeust, and unwind the complex condition to be more readable. Signed-off-by:
-
Christoph Hellwig authored
->retries is counting the number of times a command is resubmitted, and be cleared on the first time we see the command. We currently don't do that for non-PCIe command, which is easily fixed by moving the setup to common code. Signed-off-by:
-
Christoph Hellwig authored
This driver is for pre-IDE hardisk that are only found in PC from the stoneage of personal computing, and which we don't support elsewhere in the kernel these days. It's also been marked broken forever. Signed-off-by:
-
Bart Van Assche authored
The block layer core sets blk_mq_queue_data.list but no block drivers read that member. Hence remove it and also the code that is used to set this member. Signed-off-by:
-
