- 29 Jan, 2015 32 commits
-
-
Antti Palosaari authored
Use own goto label for error case mem free is needed, even kfree could be called with NULL. I think it is better to have it, even not required. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Antti Palosaari authored
- Rename ID table. - Remove magic numbers from ID table driver data field. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Antti Palosaari authored
Rename firmare download error path goto label. Remove firmware NULL set as NULL value is not needed anymore, due to recent change which started using goto labels for firmware error handling. Cc: Olli Salonen <olli.salonen@iki.fi> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Antti Palosaari authored
Carry struct i2c_client pointer in tuner_priv. This driver is I2C driver, which is represented as a struct i2c_client, so better to carry this top level structure for each routine in order to unify things. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Antti Palosaari authored
Remove if () from firmware command error path as there should not be any error prone conditional logic there. Use goto labels instead. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Antti Palosaari authored
'dev' is likely most common name in kernel for structure containing device state instance, so rename it in order to keep things consistent. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Antti Palosaari authored
Rename firmware variable from fw_file to fw_name and change its type from u8 to const char as request_firmware() input defines. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Antti Palosaari authored
Print chip version once using log level into when init() is called. Remove cold/warm state printing as those are not very useful. old printing: si2168 6-0064: found a 'Silicon Labs Si2168' in cold state si2168 6-0064: downloading firmware from file 'dvb-demod-si2168-b40-01.fw' si2168 6-0064: firmware version: 4.0.11 si2168 6-0064: found a 'Silicon Labs Si2168' in warm state new printing: si2168 6-0064: found a 'Silicon Labs Si2168-B40' si2168 6-0064: downloading firmware from file 'dvb-demod-si2168-b40-01.fw' si2168 6-0064: firmware version: 4.0.11 Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Antti Palosaari authored
commit 034e1ec0 si2168: One function call less in si2168_init() after error detection That commit added goto label for error path to release firmware, but forgets to remove variable NULL set. Remove those now. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Antti Palosaari authored
All known old firmware firmware formats are downloaded using 8 byte chunks. Reject firmware if it could not be divided to 8 byte chunks and because of that we could simplify some calculations. Now both supported firmware download routines are rather similar. Cc: Olli Salonen <olli.salonen@iki.fi> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Antti Palosaari authored
Use own label for kzalloc failure in which does not call kfree(). kfree() could be called with NULL, but it is still better to have own label which skips unnecessary kfree(). Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Antti Palosaari authored
Change formatter from signed to unsigned as stream_id is 32bit unsigned variable. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Antti Palosaari authored
Even firmware version is not needed to know, it is still interesting and useful to know some cases. Due to that increase its printing to info log level. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Antti Palosaari authored
Rename some goto labels and more. No functionality changes. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Antti Palosaari authored
Remove if () from firmware command error path as there should not be any error prone conditional logic there. Use goto labels instead. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Antti Palosaari authored
We don't need that anymore as same pointer is passed to each routine via struct dvb_frontend private field. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Antti Palosaari authored
Carry struct i2c_client pointer inside struct dvb_frontend private pointer. This driver is I2C driver, which is represented as a struct i2c_client, so better to carry this top level structure for each routine in order to unify things. This allows further simplification. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Antti Palosaari authored
'dev' is most common name in kernel for structure containing device state instance, so rename it. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Antti Palosaari authored
w_scan complains about missing symbol rate limits: This dvb driver is *buggy*: the symbol rate limits are undefined - please report to linuxtv.org Chip supports 1 to 7.2 MSymbol/s on DVB-C. Cc: stable@vger.kernel.org Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Michael Ira Krufky authored
Add support for controlling TP clock mode for VSB and QAM annex-B/C mode. Gated clock mode is the default value, and does not support QAM annex-C. The patch enables setting this control to fixed clock mode. Signed-off-by: Michael Ira Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Michael Ira Krufky authored
Simplify the code a little bit by removing some uneeded arguments to lgdt3305_mpeg_mode_polarity(). Signed-off-by: Michael Ira Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Luca Bonissi authored
I found a problem on vc032x gspca usb webcam subdriver: "bytesperline" property is wrong for YUYV and YVYU formats. With recent v4l-utils library (>=0.9.1), that uses "bytesperline" for pixel format conversion, the result is a wrong jerky image. Patch tested on my laptop (USB webcam Logitech Orbicam 046d:0892). BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=91181Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Hans de Goede authored
"n" is a user controlled integer. The code here doesn't handle the case where "n" is negative and this causes a static checker warning. drivers/media/usb/gspca/gspca.c:1571 vidioc_s_parm() warn: no lower bound on 'n' parm.capture.readbuffers is unsigned, so make n unsigned too, fixing this. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Joe Howse authored
Add support in the PS3 Eye driver for QVGA capture at higher frame rates: 187, 150, and 137 FPS. This functionality is valuable because the PS3 Eye is popular for computer vision projects and no other camera in its price range supports such high frame rates. Correct a QVGA mode that was listed as 40 FPS. It is really 37 FPS (half of 75 FPS). Tests confirm that the nominal frame rates are achieved. Signed-off-by: Joe Howse <josephhowse@nummist.com> Tested-by: Antonio Ospite <ao2@ao2.it> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Antonio Ospite authored
Signed-off-by: Antonio Ospite <ao2@ao2.it> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Hans Verkuil authored
If start_streaming fails, then the buffers must be given back to vb2 with state QUEUED, not ERROR. Otherwise a WARN_ON will be generated. In the disconnect it is pointless to call pwc_cleanup_queued_bufs() as stop_streaming() will be called anyway. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Tested-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Hans de Goede authored
Add support for the larger fifo found on sun5i and sun6i, having a separate compatible for the ir found on sun5i & sun6i also is useful if we ever want to add ir transmit support, because the sun5i & sun6i version do not have transmit support. Note this commits also adds checking for the end-of-packet interrupt flag (which was already enabled), as the fifo-data-available interrupt flag only gets set when the trigger-level is exceeded. So far we've been getting away with not doing this because of the low trigger-level, but this is something which we should have done since day one. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Hans de Goede authored
On sun6i the cir block is attached to the reset controller, add support for de-asserting the reset if a reset controller is specified in dt. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Mauro Carvalho Chehab authored
Checkpatch complained about a few issues, like FSF address. Also, multi-line comments are not following the Kernel CodingStyle. While not too late, let's fix those issues. Cc: John McMaster <johndmcmaster@gmail.com> Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
John McMaster authored
Adds support for AmScope MU800 / ToupTek UCMOS08000KPB USB microscope camera. Signed-off-by: John McMaster <johndmcmaster@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Hans Verkuil authored
When converting to or from Y'CbCr and R'G'B' the Y offset depends on the quantization range: it's 0 for full and 16 for limited range. But in the code it was hardcoded to 16. This messed up the brightness of the generated pattern. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Sakari Ailus authored
of_read_number() is defined in of.h but does not return an error code, so that non-of implementation could simply return an error. Temporarily work around this until of_read_number() can be replaced by of_property_read_u64_array(). Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
- 27 Jan, 2015 8 commits
-
-
Antti Palosaari authored
We must unregister frontend first and after that driver itself. That order went wrong after demod drivers were switched to kernel I2C drivers, causing crashes. Tested-by: Benjamin Larsson <benjamin@southpole.se> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Antti Palosaari authored
As rtl2832 driver support now I2C binding we will switch to that one. Tested-by: Benjamin Larsson <benjamin@southpole.se> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Antti Palosaari authored
Convert that driver to I2C driver model. Legacy DVB binding is left also for later removal... Tested-by: Benjamin Larsson <benjamin@southpole.se> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Laurent Pinchart authored
This reverts commit 18661234. The video_device debug field has been renamed to dev_debug, resulting in a compilation failure. As v4l2 debugging is supposed to be controlled through a sysfs attribute created by the v4l2 core, there's no need to duplicate debug control through a module parameter. Remove it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Fabian Frederick authored
Based on versioncheck. Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Aviv Greenberg authored
The UVC spec is a bit vague wrt devices using bulk endpoints, specifically, how to signal to a device to start streaming. For devices using isoc endpoints, the sequence for start streaming is: 1) The host sends PROBE_CONTROL(SET_CUR) PROBE_CONTROL(GET_CUR) 2) Host selects desired config and calls COMMIT_CONTROL(SET_CUR) 3) Host selects an alt interface other then zero - e.g SELECT_ALTERNATE_INTERFACE(1) 4) The device starts streaming However for devices using bulk endpoints, there must be *no* alt interface other than setting zero. From the UVC spec: "A VideoStreaming interface containing a bulk endpoint for streaming shall support only alternate setting zero. Additional alternate settings containing bulk endpoints are not permitted in a device that is compliant with the Video Class specification." So for devices using bulk endpoints, step #3 above is irrelevant, and thus cannot be used as an indication for the device to start streaming. So in practice, such devices start streaming immediately after a COMMIT_CONTROL(SET_CUR). In the uvc resume() handler, an unsolicited commit is sent, which causes devices using bulk endpoints to start streaming unintentionally. This patch modifies resume() handler to send a commit only if streaming needs to be reestablished, i.e if the device was actually streaming before is was suspended. Signed-off-by: Aviv Greenberg <aviv.d.greenberg@intel.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Nobuhiro Iwamatsu authored
LNE bit in VI6_DISP_IRQ_STA register are from the 0 bit to 4 bit. This fixes bit position specified by VI6_DISP_IRQ_STA_LNE. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Nobuhiro Iwamatsu authored
LNEE bit in VI6_DISP_IRQ_ENB register are from the 0 bit to 4 bit. This fixes bit position specified by VI6_DISP_IRQ_ENB_LNEE. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-