Arcturus VCN and JPEG only got CG support, and no PG support
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

And clean up the duplicated stuff
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

By adding JPEG IP block to the family
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

By using JPEG IP block type
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

By using its own enabling function
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

By using its own IP block type.
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

By using its own JPEG PowerUp and PowerDown messages

v2: add argument to PowerDownJpeg message
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Similar to SDMA, VCN etc.

v2: add argument to both PowerUpJpeg and PowerDownJpeg messages
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

By separating the JPEG power feature, and using its
own PowerUp and PowerDown messages

v2: remove PowerUpJpeg message argument
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

It will be used for different SMU specific to HW
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

And enable them for Navi1x and Renoir
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

From JPEG2.0, it will use its own PG/CG
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

They are no longer needed, using from JPEG2.0 instead.
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

It got separated from VCN2.0 with a new jpeg_v2_0_ip_block
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

They will be used for JPEG2.0 and later.
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

From VCN2.0, JPEG2.0 is a separated IP block.
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

JPEG1.0 will be functional along with VCN1.0
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

For VCN1.0, the separation is just in code wise, JPEG1.0 HW is still
included in the VCN1.0 HW.
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

It will be used for all versions of JPEG eventually. Previous
JPEG tests will be removed later since they are still used by
JPEG2.x.
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

It will be used for JPEG IP 1.0, 2.0, 2.5 and later.
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

1. no need to allocate an extra member for 'mqd_backup' array
2. backup/restore mqd to/from the correct 'mqd_backup' array slot

v2: warning fix (Alex)
Signed-off-by: Xiaojie Yuan <xiaojie.yuan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

reuse vg20 umc functions for arcturus umc ras
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: John Clements <John.Clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

check hw ras capablity via atomfirmware
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: John Clements <John.Clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

After the recent cleanup, the functionalities provided by the previous
kfd_kernel_queue_*.c are actually all packet manager related. So rename
them to reflect that.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The ops_asic_specific function pointers are actually quite generic after
using a simple if condition. Eliminate it by code refactoring.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The only difference that CIK kernel queue functions are different from
VI is avoid allocating eop_mem. We can achieve that by using a if
condition.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/gpu/drm/amd/powerplay/smumgr/vegam_smumgr.c: In
function ‘vegam_populate_smc_acpi_level’:
drivers/gpu/drm/amd/powerplay/smumgr/vegam_smumgr.c:1117:11:
warning: variable 'us_mvdd' set but not used [-Wunused-but-set-variable]

It is never used, so can be removed.

Fixes: ac7822b0 ("drm/amd/powerplay: add smumgr support for VEGAM (v2)")
Signed-off-by: yu kuai <yukuai3@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c: In function
‘amdgpu_amdkfd_evict_userptr’:
drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c:1665:6: warning:
variable ‘invalid’ set but not used [-Wunused-but-set-variable]

'invalid' is never used, so can be removed. Thus 'atomic_inc_return'
can be replaced as 'atomic_inc'

Fixes: 5ae0283e ("drm/amdgpu: Add userptr support for KFD")
Signed-off-by: yu kuai <yukuai3@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/gpu/drm/amd/amdkfd/kfd_device.c: In function
‘kgd2kfd_post_reset’:
drivers/gpu/drm/amd/amdkfd/kfd_device.c:745:11: warning:
variable ‘count’ set but not used [-Wunused-but-set-variable]

'count' is never used, so can be removed. Thus 'atomic_dec_return'
can be replaced as 'atomic_dec'

Fixes: e42051d2 ("drm/amdkfd: Implement GPU reset handlers in KFD")
Signed-off-by: yu kuai <yukuai3@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/gpu/drm/amd/amdgpu/amdgpu_display.c: In function
‘amdgpu_display_crtc_scaling_mode_fixup’:
drivers/gpu/drm/amd/amdgpu/amdgpu_display.c:693:27: warning: variable
‘amdgpu_connector’ set but not used [-Wunused-but-set-variable]

Fixes: d38ceaf9 ("drm/amdgpu: add core driver (v4)")
Signed-off-by: yu kuai <yukuai3@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/gpu/drm/amd/amdgpu/gfx_v6_0.c: In function
‘gfx_v6_0_constants_init’:
drivers/gpu/drm/amd/amdgpu/gfx_v6_0.c:1579:6: warning: variable
‘mc_shared_chmap’ set but not used [-Wunused-but-set-variable]

drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c: In function
‘gfx_v7_0_gpu_early_init’:
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:4262:6: warning: variable
‘mc_shared_chmap’ set but not used [-Wunused-but-set-variable]

Fixes: 2cd46ad2 ("drm/amdgpu: add graphic pipeline implementation for si v8")
Fixes: d93f3ca7 ("drm/amdgpu/gfx7: rework gpu_init()")
Signed-off-by: yu kuai <yukuai3@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link.c: In function get_pbn_from_timing:
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link.c:2364:11: warning:
 variable bpc set but not used [-Wunused-but-set-variable]

It is not used since commit e49f6936 ("drm/amd/display: use
proper formula to calculate bandwidth from timing"), this also
remove get_color_depth(), which is only used here.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Adapt the change from: 1cd106ec ("drm/amdkfd: Stop using GFP_NOIO explicitly")
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This is done for other GFX in commit bb2d2128. Port it to GFX10.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

workgroup context data writes from m->cp_hqd_cntl_stack_size, so we
should deduct it when calculating the used size.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Given control stack is now in the userspace context save restore area
on GFX10, the same as GFX8, it is not needed to copy it back to userspace.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Ported from gfx9.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

create_cp_queue() could also work with SDMA queues, so we should rename
it. It only initialize the data values rather than creating queues.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

dorbell_off in the queue properties is mainly used for the doorbell dw
offset in pci bar. We should not set it to the doorbell byte offset in
process doorbell pages. This makes the code much easier to read.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The doorbell offset could mean the byte offset or the dword offset,
and the 0 offset place is also different, sometimes the start of PCI
doorbell bar or the start of process doorbell pages. Use better name
to avoid confusion.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>