Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-e2epkc38e3x0uqmi1xie4tgc@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

This is just for the low hanging fruit 'cmd' arg, a proper beautifier
will as well use arg->mask to ignore the third arg for some of the
cmds.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-phhvcyi9vdnxw9l11tbquvru@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-5f9jhbq8my4ojarhtlygveox@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

So that we can have generic formatters that act upon specific
parameters.

Start using them with a simple string table that assumes entries
will be indexes to a string table, like with the 'which' parm
for the set and getitimer syscalls

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-r0dqhapr8j6150v1wctgg340@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

So that we can add more state to formatters without having to modify
all of them.

Example is to pass a table to a generic string formatter, like for
setitimer 'which' arg.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-zyi2esmas5wfrxznh0x0fkiz@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Remove DUMMY by making sure 'feature_print' is evaluated and thus
all messages are printed.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/r/20131008155110.GA15558@krava.redhat.comSigned-off-by: Ingo Molnar <mingo@kernel.org>

David Ahern reported that when passing in LDFLAGS=-static then
the feature checks still succeed - causing build failures down
the line because the static libraries are missing.

Solve this by passing through LDFLAGS to the feature-check
Makefile.
Reported-by: David Ahern <dsahern@gmail.com>
Tested-by: David Ahern <dsahern@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20131007155129.GA1066@gmail.comSigned-off-by: Ingo Molnar <mingo@kernel.org>

The various testcases used different styles, which was not really
visible as long as they hid in feature-tests.mak. Now that they
are out in the open make them prettier.

( Also delete the leftover, empty feature-tests.mak file. )

Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-drDWk8xltndjdsespzjbhu6w@git.kernel.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>

If someone specifies a single target, mixed with O=, the following way:

    hubble:~/tip/tools/perf> make O=/tmp/perf util/stat.o
    BUILD: Doing 'make -j8' parallel build
    gcc  -Wbad-function-cast -Wdeclaration-after-statement -Wformat-security -Wformat-y2k [...]

The build might even fail, if a target depends on other targets:

    hubble:~/tip/tools/perf> make O=/tmp/perf perf.o
    ...
    perf.c: In function ‘handle_options’:
    perf.c:155:21: error: ‘PERF_HTML_PATH’ undeclared (first use in this function)

The correct way to invoke such targets is:

    hubble:~/tip/tools/perf> make O=/tmp/perf /tmp/perf/perf.o
    BUILD: Doing 'make -j8' parallel build
    GEN /tmp/perf/common-cmds.h
    CC /tmp/perf/perf.o

But that's unnecessary typing and it's also easy to mistakenly build into the
source directory.

To fix this remove the generic suffix rules and add redirection to $(OUTPUT)
for the most popular .o targets.

Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-mk0oiukmhgSbrll6chrPkkqr@git.kernel.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>

This was a long-standing bug, relative pathnames like O=dir did not fully
work in the build system:

    $ make O=localdir clean

    SUBDIR Documentation
    ../../scripts/Makefile.include:3: *** O=localdir does not exist.  Stop.
    make[1]: *** [clean] Error 2
    make: *** [clean] Error 2

Fix this by canonizing the directory before passing it to Makefile.perf.

Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-hchMp1hozn9tqgswWcooxcru@git.kernel.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>

In case the user specifies MAKEFLAGS as an environment variable,
or uses 'make -jN' explicitly, the options can conflict and result in:

    BUILD: Doing 'make -j8' parallel build
    make[1]: warning: -jN forced in submake: disabling jobserver mode.
    GEN common-cmds.h
    make[1]: *** write jobserver: Bad file descriptor.  Stop.

Make sure we invoke the main makefile in a pristine state.

Users who want to do something non-standard can use the:

  make -f Makefile.perf

method to invoke the makefile.

Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-uen6hzTvkqqngqwjma9yoEgw@git.kernel.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>

Arnaldo noticed that the feature-check binaries are generated in the
config/check-features/ directory even if O= is specified.

Implement $(OUTPUT) logic for config/check-features/Makefile.
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-NLwlnv5prsubuey0vfocebym@git.kernel.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>

Jiri reported that 'make .o' stopped working:

  > [jolsa@krava perf]$ make -f Makefile perf.o
  > cc    -c -o perf.o perf.c
  > In file included from builtin.h:4:0,
  >                  from perf.c:9:
  > util/util.h:74:24: fatal error: lk/debugfs.h: No such file or directory
  > compilation terminated.
  > make: *** [perf.o] Error 1

This is due to GNU make having built-in rules for popular targets such
as *.o. Clear them out so that all targets as passed through to Makefile.perf.
Reported-by: Jiri Olsa <jolsa@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/n/tip-5wkuvmlaaxtfgepKcvRij8sh@git.kernel.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>

Simplify test-all.c by including it all the testcases via #include.

Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-pcZlwqq5ou7Ebvkekvhtzfbm@git.kernel.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>

Prepare to include them into test-all.c directly, by making sure
that they build cleanly and without warnings.

Also make sure they make a certain amount of sense and don't crash
when executed.

Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-Mn9gsdutzopoowk3xurqpsxE@git.kernel.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>

Also remove try-cc et al. These got obsoleted by the split-out feature checks in
config/feature-checks/.

Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-Y6ailbiranadqlrl8Dfivjbi@git.kernel.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>

Note that these are rarely executed tests, so we call feature_check() explicitly
and don't have them in CORE_FEATURE_CHECKS.

Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-pvumlx6mbtfxffgrlwO2mRcx@git.kernel.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>

Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-mky0rtpwxi3ivxsvdjoOEmhr@git.kernel.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>

To make it more apparent that there is not change in functionality we introduced
Makefile.parallel separately and now flip it with the main Makefile, which
moves into Makefile.perf.

The renames are:

   Makefile.parallel => Makefile
   Makefile          => Makefile.perf

Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-igRfuw9ugbnnpixLd6wpptzl@git.kernel.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>

Implement automatic parallel builds when building in tools/perf:

  $ time make

  # [ perf build: Doing 'make -j12' parallel build. ]

  Auto-detecting system features:

  ...

  real    0m9.265s
  user    0m59.888s
  sys     0m6.082s

On GNU make achieving this is not particularly easy, it requires a separate
makefile, which then invokes the main Makefile.

( Note: this patch adds Makefile.parallel to show the concept - the two
  makefiles will be flipped in the next patch to avoid having to specify -f
  to get parallelism in the default build. )

Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-dvBjwqiTyzrufzkz8oanhpf9@git.kernel.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>

Change the print-out of auto-detected features by making sure that
repeat invocations of 'make' when all features are successfully
detected do not produce the (rather lengthy) autodetection printout.

( When one or more features are missing then we still print out the
  feature detection table, to make sure people are aware of the
  resulting limitations. )

Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-qd8sMsshcjomxqx9bQcufmaa@git.kernel.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>

The detection of certain rarely detected features can be delayed
to when they are actually needed.

So speed up the common case of auto-detection by pre-building only
a core set of features and populating only their feature-flags.

[ Features not listed in CORE_FEATURES need to built explicitly
  via the feature_check() function. ]

(Also order the feature names alphabetically, while at it.)

Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-xQkuveknd0gqla1dfxrqKpkl@git.kernel.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>

config/Makefile is not included for the 'clean' target, so invoke the
config/feature-checks/Makefile 'clean' target from Makefile.perf.

Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-sh2cGvmsjbrazarlqre7pVwt@git.kernel.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>

Linus reported the following perf build system bug:

  'Another annoyance during that make was that "make install" seems to
   want to re-make the thing I just built. That's absolutely horrible, [...]'

The thing that got re-built were 'only' the (numerous) feature checks,
not the whole project - but still it was mighty annoying as the feature
checks took 9+ seconds even on reasonably fast boxes.

Even with the autodep patches where feature detection is much faster
it wastes resources, wastes screen real estate and confuses users if
we execute feature detection twice.

There were two sources for these unnecessary re-builds of the feature
checks:

 - Unnecessary nested invocations of $(MAKE), apparently to be able
   to do conditional compilation dependent on documentation tools
   presence. Use straight dependencies instead, with no nesting.

 - A direct invocation of $(MAKE) to rebuild the PERF-VERSION-FILE.
   This is apparently done to be able to include it into the
   Makefile:

    -include $(OUTPUT)PERF-VERSION-FILE

   but that's entirely pointless for two reasons: 1) the version file
   gets regenerated by the initial build pass anyway, 2) including it
   is futile, given its contents:

    #define PERF_VERSION "3.12.rc3.g8510c7"

   'make' will interpret that as a comment line...

   So just remove this part of the doc-generation logic.

With these things fixed a 'make install' now rebuilds only what is needed.

A repeated 'make install' on an already built tree is super fast now,
it finishes in under 0.3 seconds:

  #
  #  After the patch:
  #

  $ time make install

  ...

  real    0m0.280s
  user    0m0.162s
  sys     0m0.054s

Prior all the autodep changes and prior this fix, a repeat 'make install'
took 24.1 seconds (!) on the same system:

  #
  #  Before the patches:
  #

  $ time make install

  ...

  real    0m24.109s
  user    0m21.171s
  sys     0m2.449s

Which almost entirely was caused by fixable build system fat.
We are now literally ~86 times faster.

A fresh rebuild and install now takes just 11.4 seconds:

  #
  #  After the patch:
  #

  $ make clean
  $ time make -j16 install

  ...

  real    0m11.457s
  user    1m43.411s
  sys     0m7.610s

Without the patches it took 27.8 seconds:

  #
  #  Before the patches:
  #

  $ make clean
  $ time make -j16 install

  ...

  real    0m27.801s
  user    1m59.242s
  sys     0m9.749s

So even in the complete rebuild case we are now ~2.5 times faster.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-x4qjnxjGrgxpribq8sdakfTp@git.kernel.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>

libtraceevent.a and liblk.a rules have always-missed dependencies,
which causes python.so to be relinked at every build attempt - even
if none of the affected code changes.

This slows down re-builds unnecessarily, by adding more than a second
to the build time:

  comet:~/tip/tools/perf> time make

  ...

    SUBDIR /fast/mingo/tip/tools/lib/lk/
    make[1]: `liblk.a' is up to date.
    SUBDIR /fast/mingo/tip/tools/lib/traceevent/
    LINK perf
    GEN python/perf.so

  real    0m1.701s
  user    0m1.338s
  sys     0m0.301s

Add the (trivial) dependencies to not force a re-link.

This speeds up an empty re-build enormously:

  comet:~/tip/tools/perf> time make

  ...

  real    0m0.207s
  user    0m0.134s
  sys     0m0.028s

[ This adds some coupling between the build dependencies of
  libtraceevent and liblk - but until those stay relatively
  simple this should not be an issue. ]

Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-wvmlrurufuk6mo1ovtNigguT@git.kernel.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>

util/PERF-VERSION-GEN is currently executed on every build attempt,
and this script can take a lot of time on trees that are at a
significant git-distance from Linus's tree:

  $ time util/PERF-VERSION-GEN

  real    0m4.343s
  user    0m4.176s
  sys     0m0.140s

It also takes a lot of time if the Git repository is network attached, etc.,
because the commands it uses:

        TAG=$(git describe --abbrev=0 --match "v[0-9].[0-9]*" 2>/dev/null )

has to count commits from the nearest tag and thus has to access (and
decompress) every git commit blob on the relevant version path.

Even on Linus's tree it takes 0.28 seconds on a fast box to count all the
commits and get the git version string:

  $ time util/PERF-VERSION-GEN

  real    0m0.279s
  user    0m0.247s
  sys     0m0.025s

But the version string only has to be regenerated if the git repository's
head commit changes. So add a dependency of ../../.git/HEAD and touch
the file every time it's regenerated, so that Make's build rules can
pick it up and cache the result:

  make: `PERF-VERSION-FILE' is up to date.

  real    0m0.184s
  user    0m0.117s
  sys     0m0.026s

Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-wvmlrurufuk6mo1ovtNigguT@git.kernel.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>

Concatenate all feature checks into test-all.c.

This can be built and checked faster than all the individual tests.

If test-all fails then we still check all the individual features, so
this is a pure speedup, it should have no effects on functionality.

Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-5hlcb2qorzwfwrWTjiygjjih@git.kernel.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>

The strlcpy() feature check slows every build unnecessarily - so make it
a __weak function so it does not have to be auto-detected.

If the libc (or any other library) has an strlcpy() implementation it will
be used - otherwise our fallback is active.

Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-zjbrcupapu08ePsyYhhhxiwk@git.kernel.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>

Use the standard CPP style we use in the kernel:

 #ifndef foo
 # define foo bar
 #endif

Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-iqyVrrHqpn0eiwenvgwrh8lf@git.kernel.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>

Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-ihnwe6cvglVkudyvcavP1wql@git.kernel.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>

Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-gmywXandzfxnlcbzlX6bkpw1@git.kernel.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>

Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-ektO8cgvupthhyqqczSok2sr@git.kernel.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>

Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-cdxdfv7Corpfvjg9Skezhvjn@git.kernel.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>

Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-raHmlqlnv0zexsrPau8hhane@git.kernel.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>

Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-9wfutfb8ufFHrddrwlejqrai@git.kernel.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>

Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-ggucqbwFwpxyuxde6dm7itHq@git.kernel.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>

Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-oumjyVjonjvgH8ts4mftagel@git.kernel.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>

Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-gfwzurn7wywiviLp7Swyyqsy@git.kernel.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>

Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-FGmpkydfwqlkaw7yy8ewjpza@git.kernel.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>

Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-orhejqtjao3vf4wxwBUdzhaz@git.kernel.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>