- 15 Sep, 2012 1 commit
-
-
Chris Mason authored
This reverts commit 5986802c. Both paths are not error paths but regular cases where non-qgroup subvols are involved. Signed-off-by:
Chris Mason <chris.mason@fusionio.com>
-
- 28 Aug, 2012 25 commits
-
-
Stefan Behrens authored
If verify_parent_transid() fails for all mirrors, the current code calls repair_io_failure() anyway which means: - that the disk block is rewritten without repairing anything and - that a kernel log message is printed which misleadingly claims that a read error was corrected. This is an example: parent transid verify failed on 615015833600 wanted 110423 found 110424 parent transid verify failed on 615015833600 wanted 110423 found 110424 btrfs read error corrected: ino 1 off 615015833600 (dev /dev/...) It is wrong to ignore the results from verify_parent_transid() and to call repair_eb_io_failure() when the verification of the transids failed. This commit fixes the issue. Signed-off-by:
Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by:
Chris Mason <chris.mason@oracle.com>
-
Liu Bo authored
We cannot just return error before freeing ordered extent and releasing reserved space when we fail to start a transacion. Signed-off-by:
Liu Bo <bo.li.liu@oracle.com> Signed-off-by:
-
Liu Bo authored
This bug is introduced by commit 3b8bde746f6f9bd36a9f05f5f3b6e334318176a9 (Btrfs: lock extents as we map them in DIO). In dio write, we should unlock the section which we didn't do IO on in case that we fall back to buffered write. But we need to not only unlock the section but also cleanup reserved space for the section. This bug was found while running xfstests 133, with this 133 no longer complains. Signed-off-by:
-
Josef Bacik authored
We can deadlock with freeze right now because we unconditionally start a transaction in our ->sync_fs() call. To fix this just check and see if we have a running transaction to commit. This saves us from the deadlock because at this point we'll have the umount sem for the sb so we're safe from freezes coming in after we've done our check. With this patch the freeze xfstests no longer deadlocks. Thanks, Signed-off-by:
Josef Bacik <jbacik@fusionio.com> Signed-off-by:
-
Stefan Behrens authored
Commit 442a4f63 added btrfs device statistic counters for detected IO and checksum errors to Linux 3.5. The statistic part that counts checksum errors in end_bio_extent_readpage() can cause a BUG() in a subfunction: "kernel BUG at fs/btrfs/volumes.c:3762!" That part is reverted with the current patch. However, the counting of checksum errors in the scrub context remains active, and the counting of detected IO errors (read, write or flush errors) in all contexts remains active. Cc: stable <stable@vger.kernel.org> # 3.5 Signed-off-by:
-
Stefan Behrens authored
With commit acce952b, btrfs was changed to flag the filesystem with BTRFS_SUPER_FLAG_ERROR and switch to read-only mode after a fatal error happened like a write I/O errors of all mirrors. In such situations, on unmount, the superblock is written in btrfs_error_commit_super(). This is done with the intention to be able to evaluate the error flag on the next mount. A warning is printed in this case during the next mount and the log tree is ignored. The issue is that it is possible that the superblock points to a root that was not written (due to write I/O errors). The result is that the filesystem cannot be mounted. btrfsck also does not start and all the other btrfs-progs tools fail to start as well. However, mount -o recovery is working well and does the right things to recover the filesystem (i.e., don't use the log root, clear the free space cache and use the next mountable root that is stored in the root backup array). This patch removes the writing of the superblock when BTRFS_SUPER_FLAG_ERROR is set, and removes the handling of the error flag in the mount function. These lines can be used to reproduce the issue (using /dev/sdm): SCRATCH_DEV=/dev/sdm SCRATCH_MNT=/mnt echo 0 25165824 linear $SCRATCH_DEV 0 | dmsetup create foo ls -alLF /dev/mapper/foo mkfs.btrfs /dev/mapper/foo mount /dev/mapper/foo $SCRATCH_MNT echo bar > $SCRATCH_MNT/foo sync echo 0 25165824 error | dmsetup reload foo dmsetup resume foo ls -alF $SCRATCH_MNT touch $SCRATCH_MNT/1 ls -alF $SCRATCH_MNT sleep 35 echo 0 25165824 linear $SCRATCH_DEV 0 | dmsetup reload foo dmsetup resume foo sleep 1 umount $SCRATCH_MNT btrfsck /dev/mapper/foo dmsetup remove foo Signed-off-by:
Jan Schmidt <list.btrfs@jan-o-sch.net>
-
Josef Bacik authored
Daniel Blueman reported a bug with fio+balance on a ramdisk setup. Basically what happens is the balance relocates a tree block which will drop the implicit refs for all of its children and adds a full backref. Once the block is relocated we have to add the implicit refs back, so when we cow the block again we add the implicit refs for its children back. The problem comes when the original drop ref doesn't get run before we add the implicit refs back. The delayed ref stuff will specifically prefer ADD operations over DROP to keep us from freeing up an extent that will have references to it, so we try to add the implicit ref before it is actually removed and we panic. This worked fine before because the add would have just canceled the drop out and we would have been fine. But the backref walking work needs to be able to freeze the delayed ref stuff in time so we have this ever increasing sequence number that gets attached to all new delayed ref updates which makes us not merge refs and we run into this issue. So to fix this we need to merge delayed refs. So everytime we run a clustered ref we need to try and merge all of its delayed refs. The backref walking stuff locks the delayed ref head before processing, so if we have it locked we are safe to merge any refs inside of the sequence number. If there is no sequence number we can merge all refs. Doing this not only fixes our bug but keeps the delayed ref code from adding and removing useless refs and batching together multiple refs into one search instead of one search per delayed ref, which will really help our commit times. I ran this with Daniels test and 276 and I haven't seen any problems. Thanks, Reported-by:
Daniel J Blueman <daniel@quora.org> Signed-off-by:
-
Josef Bacik authored
Subvol delete is a special kind of awful where we use the global reserve to cover the ENOSPC requirements. The problem is once we're done removing everything we do a btrfs_update_inode(), which by default will try to do the delayed update stuff which will use it's own reserve. There will be no space in this reserve and we'll return ENOSPC. So instead use btrfs_update_inode_fallback() which will just fallback to updating the inode item in the case of enospc. This is fine because the global reserve covers the space requirements for this. With this patch I can now delete a subvol on a problem image Dave Sterba sent me. Thanks, Reported-by:
David Sterba <dave@jikos.cz> Signed-off-by:
-
Miao Xie authored
When we created a new snapshot, the mtime and ctime of its parent directory were not updated. Fix it. Signed-off-by:
Miao Xie <miaox@cn.fujitsu.com> Signed-off-by:
-
Arne Jansen authored
With commit commit d1270cd9 Author: Arne Jansen <sensille@gmx.net> Date: Tue Sep 13 15:16:43 2011 +0200 Btrfs: put back delayed refs that are too new I added a window where the delayed_ref's head->ref_mod code can diverge from the sum of the remaining refs, because we release the head->mutex in the middle. This leads to btrfs_lookup_extent_info returning wrong numbers. This patch fixes this by adjusting the head's ref_mod with each delayed ref we run. Signed-off-by:
Arne Jansen <sensille@gmx.net> Signed-off-by:
-
Chris Mason authored
When we split a leaf, we may end up inserting a new root on top of that leaf. The reflog code was incorrectly assuming the old root was always a node. This makes sure we skip over leaves. Signed-off-by: -
Josef Bacik authored
Arne was complaining about the space cache having mismatching generation numbers when debugging a deadlock. This is because we can run out of space in our preallocated range for our space cache if you have a pretty fragmented amount of space in your pinned space. So just increase the amount of space we preallocate for space cache so we can be sure to have enough space. This will only really affect data ranges since their the only chunks that end up larger than 256MB. Thanks, Signed-off-by:
-
Josef Bacik authored
We need a barrir before calling waitqueue_active otherwise we will miss wakeups. So in places that do atomic_dec(); then atomic_read() use atomic_dec_return() which imply a memory barrier (see memory-barriers.txt) and then add an explicit memory barrier everywhere else that need them. Thanks, Signed-off-by: -
Arne Jansen authored
Commit a168650c introduced a waiting mechanism to prevent busy waiting in btrfs_run_delayed_refs. This can deadlock with btrfs_run_ordered_operations, where a tree_mod_seq is held while waiting for the io to complete, while the end_io calls btrfs_run_delayed_refs. This whole mechanism is unnecessary. If not enough runnable refs are available to satisfy count, just return as count is more like a guideline than a strict requirement. In case we have to run all refs, commit transaction makes sure that no other threads are working in the transaction anymore, so we just assert here that no refs are blocked. Signed-off-by:
-
Fengguang Wu authored
Fix a real bug caught by coccinelle. fs/btrfs/delayed-inode.c:1013:1-11: second lock on line 1013 Signed-off-by:Fengguang Wu <fengguang.wu@intel.com>
-
Josef Bacik authored
We've been allocating a big array for csums instead of storing them in the io_tree like we do for buffered reads because previously we were locking the entire range, so we didn't have an extent state for each sector of the range. But now that we do the range locking as we map the buffers we can limit the mapping lenght to sectorsize and use the private part of the io_tree for our csums. This allows us to avoid an extra memory allocation for direct reads which could incur latency. Thanks, Signed-off-by: -
Josef Bacik authored
When we close devices we add back empty devices for some reason that escapes me. In the case of a missing dev we don't allocate an rcu_string for it's name, so check to see if the device has a name and if it doesn't don't bother strdup()'ing it. Thanks, Signed-off-by: -
Josef Bacik authored
If you do the following mkfs.btrfs /dev/sdb /dev/sdc rmmod btrfs dd if=/dev/zero of=/dev/sdb bs=1M count=1 mount -o degraded /dev/sdc /mnt/btrfs-test the box will panic trying to deref the name for the missing dev since it is the lower numbered devid. So fix show_devname to not use missing devices. Thanks, Signed-off-by: -
Stefan Behrens authored
In iterate_inodes_from_logical() the error result from extent_from_logical() is patched by mistake. Typically ENOENT is patched to EINVAL because (-ENOENT & BTRFS_EXTENT_FLAG_TREE_BLOCK) evaluates to true. Signed-off-by: -
Josef Bacik authored
A deadlock in xfstests 113 was uncovered by commit d187663e This is because we would not return EIOCBQUEUED for short AIO reads, instead we'd wait for the DIO to complete and then return the amount of data we transferred, which would allow our stuff to unlock the remaning amount. But with this change this no longer happens, so if we have a short AIO read (for example if we try to read past EOF), we could leave the section from EOF to the end of where we tried to read locked. Fixing this is tricky since there is no clear way to know exactly how much data DIO truly submitted for IO, so to make this less hard on ourselves and less combersome we need to lock the extents as we try to map them, and then we unlock any areas we didn't actually map. This makes us completely safe from deadlocks and reliance on a particular behavior of the DIO code. This also lays the groundwork for allowing us to use the normal csum storage method for reads which means we can remove an allocation. Thanks, Signed-off-by:
-
Dan Carpenter authored
"trans->transid" is cpu endian but we want to store the data as little endian. "item->ctime.nsec" is only 32 bits, not 64. Signed-off-by:Dan Carpenter <dan.carpenter@oracle.com>
-
Dan Carpenter authored
We should release this mutex before returning the error code. Signed-off-by: -
Dan Carpenter authored
add_qgroup_rb() never returns NULL, only error pointers. Signed-off-by: -
Dan Carpenter authored
These are returning zero when it should be returning a negative error code. Signed-off-by: -
Stefan Behrens authored
This should obviously not be "if (&flag)" but "if (flag)". Signed-off-by:
-
- 25 Jul, 2012 12 commits
-
-
Chris Mason authored
Signed-off-by: -
git://github.com/ablock84/linux-btrfsChris Mason authored
This is the kernel portion of btrfs send/receive Conflicts: fs/btrfs/Makefile fs/btrfs/backref.h fs/btrfs/ctree.c fs/btrfs/ioctl.c fs/btrfs/ioctl.h Signed-off-by: -
Alexander Block authored
This patch introduces the BTRFS_IOC_SEND ioctl that is required for send. It allows btrfs-progs to implement full and incremental sends. Patches for btrfs-progs will follow. Signed-off-by:
Alexander Block <ablock84@googlemail.com> Reviewed-by:
Alex Lyakas <alex.bolshoy.btrfs@gmail.com>
-
Alexander Block authored
This function is used to find the differences between two trees. The tree compare skips whole subtrees if it detects shared tree blocks and thus is pretty fast. Signed-off-by:
-
Alexander Block authored
This patch introduces uuids for subvolumes. Each subvolume has it's own uuid. In case it was snapshotted, it also contains parent_uuid. In case it was received, it also contains received_uuid. It also introduces subvolume ctime/otime/stime/rtime. The first two are comparable to the times found in inodes. otime is the origin/creation time and ctime is the change time. stime/rtime are only valid on received subvolumes. stime is the time of the subvolume when it was sent. rtime is the time of the subvolume when it was received. Additionally to the times, we have a transid for each time. They are updated at the same place as the times. btrfs receive uses stransid and rtransid to find out if a received subvolume changed in the meantime. If an older kernel mounts a filesystem with the extented fields, all fields become invalid. The next mount with a new kernel will detect this and reset the fields. Signed-off-by:
-
Alexander Block authored
Make iref_to_path non static (needed in send) and rename it to btrfs_iref_to_path Signed-off-by: -
Chris Mason authored
We were missing wakeups on the delayed ref waitqueue due to races on waitqueue_active. Signed-off-by: -
Chris Mason authored
Each ordered operation has a free callback, and this was called with the worker spinlock held. Josef made the free callback also call iput, which we can't do with the spinlock. This drops the spinlock for the free operation and grabs it again before moving through the rest of the list. We'll circle back around to this and find a cleaner way that doesn't bounce the lock around so much. Signed-off-by: -
Mitch Harder authored
In support of the recently added capability to remount with lzo compression, provide a helper function to check the compression INCOMPAT flags when remounting with lzo compression, and set the flags if necessary. Also, implement the new helper function when defragmenting with explicit lzo compression and when setting the default subvolume. Signed-off-by:
Mitch Harder <mitch.harder@sabayonlinux.org> Signed-off-by:
-
git://git.jan-o-sch.net/btrfs-unstableChris Mason authored
Conflicts: fs/btrfs/ioctl.c fs/btrfs/ioctl.h fs/btrfs/transaction.c fs/btrfs/transaction.h Signed-off-by: -
Arne Jansen authored
Often no exact match is wanted but just the next lower or higher item. There's a lot of duplicated code throughout btrfs to deal with the corner cases. This patch adds a helper function that can facilitate searching. Signed-off-by: -
David Sterba authored
Lift the EXDEV condition and allow different root trees for files being cloned, then pass source inode's root when searching for extents. Cloning is not allowed to cross vfsmounts, ie. when two subvolumes from one filesystem are mounted separately. Signed-off-by:David Sterba <dsterba@suse.cz>
-
- 23 Jul, 2012 2 commits
-
-
Liu Bo authored
While testing with my buffer read fio jobs[1], I find that btrfs does not perform well enough. Here is a scenario in fio jobs: We have 4 threads, "t1 t2 t3 t4", starting to buffer read a same file, and all of them will race on add_to_page_cache_lru(), and if one thread successfully puts its page into the page cache, it takes the responsibility to read the page's data. And what's more, reading a page needs a period of time to finish, in which other threads can slide in and process rest pages: t1 t2 t3 t4 add Page1 read Page1 add Page2 | read Page2 add Page3 | | read Page3 add Page4 | | | read Page4 -----|------------|-----------|-----------|-------- v v v v bio bio bio bio Now we have four bios, each of which holds only one page since we need to maintain consecutive pages in bio. Thus, we can end up with far more bios than we need. Here we're going to a) delay the real read-page section and b) try to put more pages into page cache. With that said, we can make each bio hold more pages and reduce the number of bios we need. Here is some numbers taken from fio results: w/o patch w patch ------------- -------- --------------- READ: 745MB/s +25% 934MB/s [1]: [global] group_reporting thread numjobs=4 bs=32k rw=read ioengine=sync directory=/mnt/btrfs/ [READ] filename=foobar size=2000M invalidate=1 Signed-off-by:Liu Bo <liubo2009@cn.fujitsu.com> Signed-off-by:
-
Liu Bo authored
For backref walking, we've introduce delayed ref's sequence. However, it changes our preallocation behavior. The story is that when we preallocate an extent and then mark it written piece by piece, the ideal case should be that we don't need to COW the extent, which is why we use 'preallocate'. But we may not make use of preallocation, since when we check for cross refs on the extent, we may have two ref entries which have the same content except the sequence value, and we recognize them as cross refs and do COW to allocate another extent. So we end up with several pieces of space instead of an whole extent. Signed-off-by:
-
