ninth chunk of bp_mod.h's cleanup
Signed-off-by: Daniel Cotey <puff65537@bansheeslibrary.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

eighth chunk of bp_mod.h's cleanup
Signed-off-by: Daniel Cotey <puff65537@bansheeslibrary.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

seventh chunk of bp_mod.h's cleanup
Signed-off-by: Daniel Cotey <puff65537@bansheeslibrary.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sixth chunk of bp_mod.h's cleanup
Signed-off-by: Daniel Cotey <puff65537@bansheeslibrary.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fifth chunk of bp_mod.h's cleanup
Signed-off-by: Daniel Cotey <puff65537@bansheeslibrary.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fourth chunk of bp_mod.h's cleanup
Signed-off-by: Daniel Cotey <puff65537@bansheeslibrary.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

third chunk of bp_mod.h's cleanup
Signed-off-by: Daniel Cotey <puff65537@bansheeslibrary.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

second chunk of bp_mod.h's cleanup
Signed-off-by: Daniel Cotey <puff65537@bansheeslibrary.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

first chunk of bp_mod.h's cleanup
Signed-off-by: Daniel Cotey <puff65537@bansheeslibrary.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

softsynth_read() reads a character at a time from the init string;
when it finds the null terminator it sets the initialized flag but
then repeats the last character.

Additionally, if the read() buffer is not big enough for the init
string, the next read() will start reading from the beginning again.
So the caller may never progress to reading anything else.

Replace the simple initialized flag with the current position in
the init string, carried over between calls.  Switch to reading
real data once this reaches the null terminator.

(This assumes that the length of the init string can't change, which
seems to be the case.  Really, the string and position belong together
in a per-file private struct.)
Tested-by: Samuel Thibault <sthibault@debian.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

we should be using the NULL macro, not 0 to compare against
a pointer value, and also remove braces around the single
if conditional after the create_proc_entry
Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

replace some of the c99 comments to the structures with c88 comment style
no code change is done here.
Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The main problem with the hand rolled code was that there weren't any
range checks so you could corrupt memory by writing too much data to
the proc file.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Daniel Cotey <puff65537@bansheeslibrary.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

If you tried to cat more than 255 characters (the last character is for
the terminator) to these proc files then it would corrupt kernel memory.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Daniel Cotey <puff65537@bansheeslibrary.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename the standard `init_module()` and `cleanup_module()` functions and
make them static.  Use `module_init()` and `module_exit()` to mark the
renamed functions as the module init and exit functions.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

All the drivers that use the "mite" module now allocate a `struct
mite_struct` dynamically instead of searching the `mite_devices` list
populated during initialization of the "mite" module.

Remove the list of devices and the function that prints available NI
devices on the list (`mite_list_devices()`).  The list node and `used`
members in `struct mite_struct` are now redundant, so remove them.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Allocate `struct mite_device` dynamically instead of searching for
one on the `mite_devices` list constructed by the "mite" module.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Allocate `struct mite_device` dynamically instead of searching for
one on the `mite_devices` list constructed by the "mite" module.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Allocate `struct mite_device` dynamically instead of searching for
one on the `mite_devices` list constructed by the "mite" module.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This driver's comedi `detach` handler (`ni_670x_detach()`) calls
`free_irq()` but the driver doesn't call `request_irq()` anywhere.
Remove the spurious call.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Allocate `struct mite_device` dynamically instead of searching for
one on the `mite_devices` list constructed by the "mite" module.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Allocate `struct mite_device` dynamically instead of searching for
one on the `mite_devices` list constructed by the "mite" module.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Allocate `struct mite_device` dynamically instead of searching for
one on the `mite_devices` list constructed by the "mite" module.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Allocate `struct mite_device` dynamically instead of searching for
one on the `mite_devices` list constructed by the "mite" module.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add `mite_alloc()` to allow drivers to allocate and initialize a `struct
mite_struct` dynamically and export it.  Add `mite_free()`, which is
currently just an inline wrapper for `kfree()`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Replace the `printk()` calls in this module with `dev_...()` calls where
possible or `pr_...()` calls otherwise.

Rework the normally ifdefed out (by the `DEBUG_MITE` macro)
`mite_dump_regs()` to dump register offsets instead of remapped
addresses.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The static inline functions `MITE_IODWBSR_1_WSIZE_bits()` and `CR_RL()`
in "mite.h" work out a base-2 logarithm using a `while` loop.  Change
them to use `ilog2()`.  Also change `CR_RL()` to clamp the maximum value
instead of printing an error.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The `mite_alloc_ring()` and `mite_free_ring()` static inline functions
in "mite.h" are reasonably large.  Transfer them to "mite.c" and export
them.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Declare some non-exported functions in "mite.c" `static` and remove
their declarations from "mite.h".
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Convert this PCI driver to use the comedi `attach_pci` callback instead
of the `attach` callback for PCI auto-configuration.  There is no need
to support manual attachment of PCI devices supported by this driver, so
remove the `attach` callback altogether.

Note that this driver still uses the list of PCI "mite" devices created
by the "mite" module.  This will be dealt with by a later patch once
dynamic allocation of "mite" structures has been implemented.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add a semi-colon after the macro call
`module_comedi_pci_driver(ni_pcimio_driver, ni_pcimio_pci_driver)`.  It
compiles with or without the semicolon but it ought to have it.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

`ni_E_init()` doesn't use the second parameter pointing to a `struct
comedi_devconfig` passed from a comedi `attach` handler, so remove the
parameter.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Convert this PCI driver to use the comedi `attach_pci` callback instead
of the `attach` callback for PCI auto-configuration.  There is no need
to support manual attachment of PCI devices supported by this driver, so
remove the `attach` callback altogether.

Note that this driver still uses the list of PCI "mite" devices created
by the "mite" module.  This will be dealt with by a later patch once
dynamic allocation of "mite" structures has been implemented.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The PCI-6534 needs three firmware files loading to work with the driver.
That is currently done by passing the firmware data using the
`COMEDI_DEVCONFIG` ioctl that uses the comedi `attach()` hook in the
driver.  This doesn't work for auto-configured PCI devices (which also
currently use the `attach()` hook in this driver, but doesn't have the
firmware-loading options set in the `struct comedi_devconfig *`
parameter).

Change the driver to request the firmware files using
`request_firmware()`, ignoring any firmware-loading options set in the
`struct comedi_devconfig`.

The PCI-6534 has a main FPGA which needs to be loaded first, and two
"scarabs".  Scarab A is loaded with firmware to support digital input
mode, and scarab B is loaded with firmware to support digital output
mode.

I don't think the order of loading the scarab firmwares matters as long
as they are loaded with the correct firmware files.  This update loads
scarab B first, whereas the original code loaded scarab A first.  The
firmware files are loaded in the following order:

A) main FPGA: "ni6534a.bin" (FW_PCI_6534_MAIN)
B) scarab B: "niscrb02.bin" (FW_PCI_6534_SCARAB_DO)
C) scarab A: "niscrb01.bin" (FW_PCI_6534_SCARAB_DI)

The required firmware files can be found in the
"comedi-nonfree-firmware" tar-ball at
<http://www.comedi.org/download/comedi-nonfree-firmware-2007.06.22.tar.gz>.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Convert the `printk()` calls in this driver to use the `dev_...()` calls
where possible, or the `pr_...()` calls otherwise.  Combine
non-line-terminated prints into single-line prints.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Convert this PCI driver to use the comedi `attach_pci` callback instead
of the `attach` callback for PCI auto-configuration.  Remove support for
manual attachment of PCI boards supported by this driver.  The `attach`
callback is still needed to manually attach ISA boards, but print an
error if an attempt is made to manually attach a PCI board.

Note that this driver still uses the list of PCI "mite" devices created
by the "mite" module.  This will be dealt with by a later patch once
dynamic allocation of "mite" structures has been implemented.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Move the `labpc_driver` and `labpc_pci_table` variables nearer the
module initialization code near the bottom of the module for aesthetic
reasons and to avoid a forward declaration of `labpc_attach()`.

As a consequence, to avoid having to add a forward declaration of the
`labpc_driver` variable, change code that uses
`labpc_driver.driver_name` to use `DRV_NAME` instead, and change code
that uses `labpc_driver.num_names` to use `ARRAY_SIZE(labpc_boards)`
instead.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the macro `module_comedi_pci_driver(comedi_driver, pci_driver)` to
register the module as a Comedi PCI driver if the module supports PCI
devices, otherwise use `module_comedi_driver(comedi_driver)` to register
it as an ordinary Comedi driver.  Rename variables and functions that
have prefix `driver_` for consistency.  Set the `name` member of the
`struct pci_driver` variable in its initializer instead of initializing
it in the module initialization function.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Convert the `printk()` calls in this driver to use the `dev_...()` calls
where possible, or the `pr_...()` calls otherwise.  Remove the ifdefed
out code that prints the EEPROM contents.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Convert this PCI driver to use the comedi `attach_pci` callback instead
of the `attach` callback for PCI auto-configuration.  There is no need
to support manual attachment of PCI devices supported by this driver, so
remove the `attach` callback altogether.

Note that this driver still uses the list of PCI "mite" devices created
by the "mite" module.  This will be dealt with by a later patch once
dynamic allocation of "mite" structures has been implemented.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>