- 26 Feb, 2010 40 commits
-
-
Abylay Ospan authored
if the AGC2 > 1400 then no signal on this frequency for STV0900 Cut 3.0. For Cut 2.0 this value is 700. Signed-off-by:
Abylay Ospan <aospan@netup.ru> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Douglas Schilling Landgraf authored
As pointed by Magnus Alm <magnus.alm@gmail.com>, commit 99dbd128bb applied a hunk at the wrong place. This patch moves the code to the right place. Signed-off-by: -
Oliver Endriss authored
Commiter: Oliver Endriss <o.endriss@gmx.de> Fix typo. Sort list of components for better readability. Signed-off-by:
Oliver Endriss <o.endriss@gmx.de> Signed-off-by:
-
Oliver Endriss authored
Commiter: Oliver Endriss <o.endriss@gmx.de> Use 'get_dvb_firmware ngene' to download 'ngene_15.fw' and 'ngene_17.fw'. Signed-off-by:
-
Stephen Rothwell authored
After merging the scsi-post-merge tree, today's linux-next build (powerpc allyesconfig) failed like this: drivers/media/dvb/ngene/ngene-core.c: In function 'ngene_release_buffers': drivers/media/dvb/ngene/ngene-core.c:1443: error: implicit declaration of function 'vfree' drivers/media/dvb/ngene/ngene-core.c: In function 'ngene_get_buffers': drivers/media/dvb/ngene/ngene-core.c:1454: error: implicit declaration of function 'vmalloc' drivers/media/dvb/ngene/ngene-core.c:1454: warning: assignment makes pointer from integer without a cast drivers/media/dvb/ngene/ngene-core.c:1461: warning: assignment makes pointer from integer without a cast drivers/media/dvb/ngene/ngene-core.c:1467: warning: assignment makes pointer from integer without a cast drivers/media/dvb/ngene/ngene-core.c: In function 'ngene_probe': drivers/media/dvb/ngene/ngene-core.c:1836: warning: assignment makes pointer from integer without a cast Caused by commit b54c755d6263efe376f3dfc8c72c8e7b4fb4f4c1 ("V4L/DVB: ngene: Initial check-in"). Signed-off-by:Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
Richard Röjfors authored
The timberdale FPGA is found on the Intel in-Vehicle Infotainment reference board russelville. The driver is a PCI driver which chunks up the I/O memory and distributes interrupts to a number of platform devices for each IP inside the FPGA. Signed-off-by:
Richard Röjfors <richard.rojfors@pelagicore.com> Signed-off-by:
Samuel Ortiz <sameo@linux.intel.com> Signed-off-by:
-
Richard Röjfors authored
This patch add supports for the radio system on the Intel Russellville board. It's a In-Vehicle Infotainment board with a radio tuner and DSP. This umbrella driver has the DSP and tuner as V4L2 subdevs and calls them when needed. Signed-off-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
-
Oliver Endriss authored
Use I2C_CLASS_TV_DIGITAL, not I2C_ADAP_CLASS_TV_DIGITAL. Remove initialisation of bus_lock mutex. Thanks to Mauro for pointing out. Signed-off-by:
-
Oliver Endriss authored
Make checkpatch.pl happy. Signed-off-by:
-
Oliver Endriss authored
Cards 18c3:abc3/18c3:abc4 should be displayed as 'Linux4Media cineS2'. Signed-off-by:
-
Oliver Endriss authored
Request might already have been processed when the interrupt arrives. Signed-off-by:
-
Oliver Endriss authored
Implement workaround for comamnd timeout. Use FW15 and avoid switching DMA on and off. Signed-off-by:
-
Oliver Endriss authored
Set ADC1 and ADC2 range of the stv0900 to 1Vpp. Signed-off-by:
-
Oliver Endriss authored
Adapt to current stv090x + stv6110 drivers. [mchehab@redhat.com: removed compilation hack added by me on a prev patch] Signed-off-by:
-
Matthias Benesch authored
Identify card 18c3:db01 as 'Mystique SaTiX-S2 Dual'. Signed-off-by:
Matthias Benesch <twoof7@freenet.de> Signed-off-by:
-
Manu Abraham authored
Trivial I2C related fixes/cleanups - Remove Unused I2C ID - point the I2C device to the physical device Signed-off-by:
Manu Abraham <manu@linuxtv.org> Acked-by:
-
Oliver Endriss authored
Remove/comment-out unused code, make some functions/declarations static. Signed-off-by:
-
Matthias Benesch authored
If parameter "one_adapter" is set, only one adapter per device will be attached. Otherwise an adapter for every frontend will be attached. Signed-off-by:
-
Oliver Endriss authored
Add EXPORT_SYMBOL(dvb_ringbuffer_flush) again, replace my_dvb_ringbuffer_flush() in ngene driver. Signed-off-by:
-
Oliver Endriss authored
Remove kernel version check for dvb_[un]register_adapter. Signed-off-by:
-
Oliver Endriss authored
Changed severity of some diagnostic messages. Signed-off-by:
-
Oliver Endriss authored
Remove stray mleep() which prevented fast tuning. Signed-off-by:
-
Roland Praml authored
Fixed unloading of module ngene. Signed-off-by:
Roland Praml <pram@gmx.de> Signed-off-by:
-
Matthias Benesch authored
Remove firmware debugging, because setting ngene_fw_debug and requesting firmware from file causes a kernel error. Signed-off-by:
-
Matthias Benesch authored
Added support for nGene based Media-Pointer DVB-S2 twin tuner cards. [mchehab@redhat.com: Fix compilation error: unknown field ‘ref_clk’] Signed-off-by:
-
Matthias Benesch authored
Remove and disable unnecessary code. Disable define ONE_ADAPTER. Signed-off-by:
-
Oliver Endriss authored
Always use firmware loader. Signed-off-by:
-
Oliver Endriss authored
Remove LNBH21 routines, disable code which broke compilation. Signed-off-by:
-
Matthias Benesch authored
Add Micronas nGene PCIe bridge driver. The source code was provided by Micronas / Ralph Metzler, and has been reformatted to comply with Linux Codingstyle. Signed-off-by:
Ralph Metzler <rjkm@metzlerbros.de> Signed-off-by:
-
Janne Grunau authored
Signed-off-by:
Janne Grunau <j@jannau.net> Signed-off-by:
-
Márton Németh authored
The fifth parameter of usb_bulk_msg() is a pointer to signed (see <linux/usb.h>) so also call this function with pointer to signed. This will remove the following sparse warning (see "make C=1"): * warning: incorrect type in argument 5 (different signedness) expected int *actual_length got unsigned int *<noident> Signed-off-by:Márton Németh <nm127@freemail.hu> Signed-off-by:
-
Jiri Slaby authored
So as a final patch, add support for hash and one hash entry for MSI digi vox mini II: iManufacturer 1 Afatech iProduct 2 DVB-T 2 iSerial 3 010101010600001 It is now handled with proper IR and key map tables. Signed-off-by:
Jiri Slaby <jslaby@suse.cz> Acked-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
-
Jiri Slaby authored
Add af9015_setup structure to hold (right now only remote) setup of distinct receivers. Add af9015_setup_match for matching ids against tables. This is for easier matching different kind of ids against tables to obtain setups. Currently module parameters and usb vendor ids are switched into and matched against tables. Hashes will follow. Signed-off-by:
-
Jiri Slaby authored
This is just a code shuffle without functional changes. For easier review of later changes, i.e. preparation. Signed-off-by:
-
Jiri Slaby authored
This will be useful for matching of IR tables later. We read the eeprom anyway for dumping. Switch the dumping to print_hex_dump_bytes and compute hash above that by hash = 0; for (u32 VAL) in (eeprom): hash *= GOLDEN_RATIO_PRIME_32 hash += VAL; // while preserving endinaness The computation is moved earlier to the flow, namely from af9015_af9013_frontend_attach to af9015_read_config, so that we can access the sum in af9015_read_config already. Signed-off-by:
-
Kusanagi Kouichi authored
I tested only tv and composite. Video works fine but no audio. Signed-off-by:
Kusanagi Kouichi <slash@ac.auone-net.jp> Signed-off-by:
-
Márton Németh authored
The default_video_input and default_audio_input module parameters are only used inside the hdpvr-core.c file so make them static. This will remove the following sparse warnings (see "make C=1"): * warning: symbol 'default_video_input' was not declared. Should it be static? * warning: symbol 'default_audio_input' was not declared. Should it be static? Signed-off-by:
-
Richard Röjfors authored
Initial support for the SAA7706H Car Radio DSP. It is a I2C device and currently the mute control is supported. When the device is unmuted it is brought out of reset and initiated using the proposed intialisation sequence. When muted the DSP is brought into reset state. [akpm@linux-foundation.org: include delay.h] Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Andrew Morton authored
Mad guess. Signed-off-by:
-
Andrew Morton authored
drivers/media/dvb/frontends/stv090x.c: In function 'stv090x_blind_search': drivers/media/dvb/frontends/stv090x.c:1967: warning: 'coarse_fail' may be used uninitialized in this function Cc: Manu Abraham <manu@linuxtv.org> Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by:
-
